Denon DSB-100 Bluetooth Speaker Disassembly
Teardown Denon Envaya Mini DSB-100 small and portable bluetooth speaker disassembly and look inside. Old speaker, but from good HiFi speakers and amplifiers manufacturer brand Denon. Just see what's inside Mini DSB-100 speaker. Some alternative Denon bluetooth speakers: dsb-250bt, DSB-150BT, DSB-50BT, DSB-200BT.
Silicone Case for Charge 5 on Aliexpress:
- bit.ly/39JOIxh
JBL Charge 5 on Amazon:
- US amzn.to/39KUDm0
- UK amzn.to/3sSOafl
- DE amzn.to/3wBD3cQ
Denon DSB-100 specifications:
- Plat time: Up to 6 hours
- Charge time: 2.5 hrs
- Compatible Bluetooth profiles: A2DP/AVRCP
- Supported codecs: AAC / SBC
- NFC bluetooth pairing: Yes
- Drivers: 2x 1.5" inch Full Range Driver
- Amplifier: High efficiency digital amplifier
- Maximum Dimensions (W x D x H) in inches: 8.2 x 2.2 x 2.1
- Weight in LBS: 1.2
🇷🇺 Hазвание видео: Разобрал Портативная и Беспроводная колонка Denon Envaya Mini DSB-100
----------------SOCIAL----------------
✔️ / techlv
✔️ / techscrews
----------Video playlists-------------
▶️ Speakers music sound & bass test • Speakers sound & bass ...
▶️ Teardown - Look inside - What's Inside? • Speaker Teardown: Look...
▶️ Do It Yourself video guides • Do It Yourself DIY vid...
▶️ Unboxing, review and first look • Unboxing, Review & Tests
Song: " Stinson - Reed Mathis " (Downloaded from the KZread Audio Library) .
DISCLAIMER: This video description and comment section contains affiliate links, which means that if you click on one of the product links and later buy the product, I’ll receive a small commission. This NEVER affects the price you pay, and it’s an easy way to support the channel and the work that I do. This helps support the channel and allows me to continue to make videos like this.
Thank you for the support!
Пікірлер: 29
Silicone Case for Charge 5 on Aliexpress: - bit.ly/39JOIxh JBL Charge 5 on Amazon: - US amzn.to/39KUDm0 - UK amzn.to/3sSOafl - DE amzn.to/3wBD3cQ
Wow 👍 you are the best 👍😱💯
@markus6789
2 жыл бұрын
Yes he is
Hi bro denon DSB 250 teardown
@franciscoacevedociudad4054
Жыл бұрын
Hi. I need to see the conector usb to the board because mine is broken. Could you show me that board and the usb conection? Thank you
Bro my speaker is buffering can you help to fix it
I need to replace the battery on this one. I was thinking of using a fenix/nitecore 18650 or even 21700 (if it fits) that has a protection circuit built in.
Благодарю. Очень помогли мне.
my denon has its charging port loose on the inside
@Techscrews
Ай бұрын
sad
Hi, I have a dsb250. The passive radiator is broken, do you know if/how I can replace it? Thanks
@Techscrews
2 жыл бұрын
Put from aliexpress any alternative.
What magnet is that
@Techscrews
Жыл бұрын
hard to say, most commonly used for speakers is ferrite, but for some speakers can find strongest neodymium.
sooooo tinyyyyy driverssss..aahhh. There's no way that anything small like that can sound 'OK' (not good, only ok). It can?.
Hi. I need to replace the micro usb conector but I don't know how install it because de board is broken. Could you show us that board to see how is usb conectes? Thank you
@Techscrews
Жыл бұрын
sorry, but I dont have anymore this speaker :(
@franciscoacevedociudad4054
Жыл бұрын
@@Techscrews Thank you anyway
@Techscrews
Жыл бұрын
@@franciscoacevedociudad4054 good luck :)
@mirbuf
7 ай бұрын
I repaired mine today, same problem, Micro USB connector broken and board lines stripped with it. I soldered a USB cable directly on the black connector pins of the CUP12726Y-4 daughterboard. Observe the connector coming from the main board, it has 1 white wire (+5v which correspond to PIN 1 on USB) and 4 black wires (Pins 2,3, 4,5 on USB). I took an old unused USB cable and cut it at the end. It has 4 wires, red (+5v), black (GND), green and white (TX/RX data). I removed TX/RX wires to save some space, then soldered GND on pins 4,5 of the daugherboard and the red wire between Pin1 and a SMD resistor immediately after it, to anchor the soldering. It works. Unfortunately the battery is dead so I can use the Denon with USB charger only. Dunno if it's worth to substitute the batteries, they costs half of a used speaker, and you need to tear down the old batteries to replace the BMS circuit. Lots of work 😓
@franciscoacevedociudad4054
7 ай бұрын
@@mirbuf excelente solución. Muchas gracias
Dây cáp key điểu khiển bị hỏng tôi có thể tìm loại nào thay thế vậy
@Techscrews
Жыл бұрын
Please eng :)
@thuymainguyen5714
Жыл бұрын
@@Techscrews control cables are broken where can i find them
Haha this is an instruction how to butcher speaker not how to disassemble it.