Sir, you truly are a KZread hero. After almost a year of not closing my laptop due to this exact hinge issue, I was able to fix the problem thanks to this video. It went smoothly and now my laptop is actually better than when I first got it. Thank you so much.

@san-joshuabarrett

4 ай бұрын

Lol this is me right now my on failed 3 days ago and I haven't closed it since. Did both of yours fail too? I'm wondering if i can use this method on both hinges because they seem to have a different shape

Thank you for making this most excellent video. As for Dell I'm disappointed they ignore an obvious engineering flaw.

Thank you very much for your video. One hinge on my laptop snapped off the plastic mounting and started to damage the display case. For me, the nerve-wracking moments were removing the bezel around the display. I was afraid that I was going to damage the screen, especially at the top and bottom, where the adhesive strips are found. However, taking it slowly, there was no damage. Adjusting the tension on the hinge screws took a few tries - I saw the tip from another viewer that said the hinge cover could be removed with the case reassembled, and that helped a lot. I used the JB Weld cold weld epoxy, and that worked great. It takes a while to set, but it bonds firmly.

Sir, thank you so much for posting this vid, I was so skeptical of me doing this on my own as I was very scared. But I persevered and tried my hardest and I managed to fix mine, it’s a little loose when I open it but it’s better than nothing, thanks again😊

THANK YOU! I thought I didn't stand a chance at finding a site or video that would so clearly walk me through fixing my Dell (less than 1 year old). God Bless You sir!

Thank you SO much for this video. This is the second time the hinges have broken on my Inspiron, what a crappy design. The first time was in warranty, now no such luck. Managed to do the repair by myself for £11 instead of going to the laptop repair place. You're doing the lord's work 🙌

This just happened to my Dell Inspiron 15 3511, and I am crestfallen. Of course, my unit is just out of the warranty period ☹. But this is a fantastic resource you have made and it should serve me well to get back in business. One thing I picked up on viewing another KZreadr on this topic is using an ordinary playing card for a prying tool. It seemed to work especially well for removing the bezel. Thank you so much for producing this.

Thank you so much! I would not have wanted to try this without your video. You explain everything very clearly and calmly.

I can't thank you enough for making this video including all the details. I successfully repaired my notebook following your instructions! Thanks again!!

Thank you! This video saved my Dell computer that is only 5 months old and Dell was useless. Thank you so much!!!!!

@rubensahakyan1340

6 ай бұрын

hi.. interesting. Dell covered in my case with 5 month old laptop with basic warranty. I paid nothing. They sent me a box with prepaid shipping, then I sent them the laptop and got it back in7 days repaired. They changed the lcd back, the hinge cap, and the lcd cable connector. All was free.. I don't like Dell's crap quality, but the service was perfect

@rubensahakyan1340

6 ай бұрын

hi.. interesting. Dell covered in my case with 5 month old laptop with basic warranty. I paid nothing. They sent me a box with prepaid shipping, then I sent them the laptop and got it back in7 days repaired. They changed the lcd back, the hinge cap, and the lcd cable connector. All was free.. I don't like Dell's crap quality, but the service was perfect

This is fantastic. Even if I COULD find original parts to do the repair, which I can't, it didn't make sense to me if the same thing was going to happen in another 6 months. This seems more like a proper SOLUTION, not just a repair. Thank you!

A sincere thank you for this awesomely clear, to the point, and very helpful video. Resulted in a no trouble quick fix!

THANK YOU SO MUCH for the repair tutorial video. Clear, concise, well planned and clearly photographed. Easy to follow directions led to a successful repair. As I am here in the US, I used JB Weld, Auto Weld 2-part epoxy. I was able to unscrew the threaded inserts that held the hinge screws and just epoxy them back into place, and not epoxy the entire hinge together. Once the inserts were dry, I just reassembled the hinges using the screws as it was originally assembled. I also recalibrated (adjusted) how stiff the hinges were, to avoid having the same problem in the future. TIP: you can adjust the hinges once the entire laptop is put back together, by just removing the hinge covers. Better to do it this way so you can accurately see how stiff or loose to make the hinges, based on how they hold to laptop screen open. Again, thanks for the repair help via the video!

Thank you very much for this wonderful information. It saved my time and money at a crucial time. The service center people asked for ten days time with considerable service charges to fix the issue. But, I fixed it within one hour as per your guidelines. Thank you so much once again for this help.

Many many thanks. I was able to fix the hinge on my dell Inspiron computer. Don’t know what I would’ve done without your help.

This was a huge help - I was able to fix my laptop! Thank you!

Can I thumbs up twice! Thank you so much for the video. I used AnchorFix-2 Heavy Duty Fast Curing Anchoring Adhesive (less than $30) and now I have anchoring adhesive for future projects, assuming it does not dry out.

Excellent video!! Thank you very much!! Followed your steps and fixed my two daugthers laptops. Best Regards!

Yes! THANK YOU. I was skeptical about the Epoxy, but once I followed your expert video instructions and I saw the conditions of the holes the hinge screws go into, I thought, "oh yes, epoxy is the only way!" It all worked fantastically!

@Swagaito_Gai

8 ай бұрын

I thought so too at first, but it turns out epoxy isn't actually necessary. My Inspiron 15 3511 (same chassis as the one in the video) was having this same exact problem where the overly tight hinges ripped the hinge screws out of the plastic lid cover. I found this video looking up fixes, but I didn't have any kind of epoxy to use. So I decided to try regular superglue instead. I had strong doubts about it being strong enough to handle the strain, but worst case scenario I could try again later with epoxy. But once I loosened the hinges to an appropriate degree, the superglue was able to handle it no problem!

@allyouneed7523

8 ай бұрын

​@@Swagaito_Gai I am just about to start the repair. I don't have any kind of epoxy, I just have super glue. I am having doubt about it working but lets see. That's the only thing I got. Ok just read your comment and I am about to start my repair.

I cant thank you enough, this video has been extremely helpful and i was able to fix laptop. Thank you so much

Thank you for this. Both of mine were broken. I used JB Weld yesterday to repair them. Saved $$$

Same thing happened to my dell. I used JB weld to keep the hinge together. Seems to be holding up pretty well. I thought my solution was a bit of a hack so I watched this video and confirmed, the pros are doing the exact same thing just with some different UK product. Lol

You are genius guy thank you so much because of your video I'm able to repair my laptop with the same issue😊

Followed your instruction and all good again many thanks

Where do you get replacement hinges from.

I have the exact same problem with dell vostro 3515 and the tech guys i gave the laptop to did a horrible job, had to visit them again 2 times. Do you recommend i do this procedure myself? And what alternative would you recommend for R kem ?

Does dell replace these with a revsioned part or anything they are coming to repair it under warranty and i pray its not just half assed bc ive only opened mine 10 times in 2 months and it broke like this,

Was quoted $300-400 for this repair which is what I paid for the laptop. I'll give this a try. Any suggestions for alternative epoxy? I don't think they sell R-kem 2 in the US.

vice grips would work well to clamp it while glue dries

How much price

Can i use gorilla glue?

So I was using my father laptop same model as in this video. And when I was normally opening the laptop I hear the crack and then I see that screen was coming out and I told my father about this problem and he go to the shop where he bought this model and the shop owner told my father that this cannot be fixed and he scold me lot cuz this was new laptop bought 6 months ago. But when I did research in internet it say's that it can be fixed....

Thank you so much for the video! My laptop is as good as new.. better actually!

What's it name

Same problem

gonna have to do this, my laptops screen bevel started trying to rip itself off when I open my laptop normally

@aliceontheinternet123

9 күн бұрын

did it work

@paologonzalez6665

7 күн бұрын

@@aliceontheinternet123 It did fix the hinge problem, but after I put it back together it stopped turning on, I don't know if I accidently damaged something while opening it up or what happened. I quadruple checked that battery was connected and everything. Ended up just buying a new laptop

Este mismo problema me apareció al 1er año de haber adquirido mi computadora DELL del mismo modelo, pero lo solucione comprando el bisel y la cubierta de pantalla, y aplicando WD 40 a la bisagra y aflojando un poco la tuerca, ya que los componentes de la bisagra son muy susceptibles al polvo y se bloquean provocando que se quiebre en esos puntos de sujeción. En mi opinión un mal diseño por parte de los ingenieros.

I do this without removing my battery and now my laptop is not turning on

What is the name of the Glu

@FrimleyComputing

9 сағат бұрын

@@Stack961 I use builders R-Kem II