The product is great. The instructions provided not so much. You tube to the rescue. Video was super helpful and clear. Just put two of these into the bed of my new 2024 Ram 1500. No spray in liner so no drilling even required. Thanks for this!

@WaterFowler41

4 ай бұрын

Glad it helped!

Thanks for this video. I went from having Tacoma with many tie down points to 2021 RAM 1500 with 4 tie downs. Also noticed your boards running perpendicular to the bed, never knew that trick! Looking forward to seeing the rest of your videos, thanks again!

Just finished installing today! Another great video and I am super happy with the tie downs so far. Fantastic addition to the bed! Next will be the interior light upgrade tomorrow! Thanks as always man!

I finally finished installing the kit thank you for the video it help a hole lot .. plus it looks great on my Reble .. thanks again Sr .....

keep the great videos coming!

I hope by now you have purchased one of those nutcert installer tools from HF. 😊 Great video. I'll subscribe just to see what you're up to.

I taped my nutserts with a rubber mallet and they went in pretty tight without exposing the metal to posible rust.

The tie down rivet system is great. I will be doing this. Good video. What i dont like is modifying my truck to fit bull rings.

@WaterFowler41

Жыл бұрын

Right on

Just installed them on my 2021 Ram 1500 short bed Big Horn...... after watching this video, it was very easy to do. I think it will make my life much easier. What kind of straps where you talking about if you dont use rachet straps ?

Great idea, thank you. What's your experience been with them so far? I would imagine you couldnt put too much full on them?

@WaterFowler41

3 жыл бұрын

I use them to keep my kids 4 wheelers in place when driving around and for lumber runs. Love how many tie down points this gives me compared to the 4 OEM ones.

@clarkgriswold2480

3 жыл бұрын

@@WaterFowler41 Huh, interesting. Sounds good. I'll have to check them out. Thanks for the reply.

I'm assuming I should get these after bed liner? or should I install before getting bed liner?

@WaterFowler41

2 жыл бұрын

I'd do a bedliner first then come back in with the tie downs afterwards. Bedliner installers may spray over your tiedowns instead of removing them.

I have a 2016 ram 1500 with a drop in bedliner in the 6' bed. I don't have any holes anywhere in my liner besides the 4 corner tie downs. Are there factory holes in my bed and if so how do I find out where? Or do I just have to drill out the metal too?

@WaterFowler41

7 ай бұрын

Sorry man I’m not sure about the older rams. All the 5th gen rams were pre drilled

Good video What is the part no for the nut insert? Is the nut insert part of the Tie-Down bracket?

@WaterFowler41

2 жыл бұрын

It comes as a complete package!

nice video gonna try those. I have a question though ,where you get the 2x4 mount bracket ?

@WaterFowler41

3 жыл бұрын

That’s a 2x6 I cut to fit the bed, keeps small stuff from sliding around.

@mrekimf1

3 жыл бұрын

@@WaterFowler41 what about the bracket holding the 2x6?

@WaterFowler41

3 жыл бұрын

There are slots formed into the bed sheet metal to hold a 2x. So just cut a board to length and it will drop into the slots. Nothing else needed.

@lxa71975

3 жыл бұрын

​@@WaterFowler41 I think he was talking about the carpet/padding it looks like you have wrapped around the ends of the 2x6 so it doesn't scuff up the bed.

@WaterFowler41

3 жыл бұрын

@@lxa71975 Yup! just a couple pieces of carpet cut to protect the edge of the wood. Sorry

👍👍❗

Will these go on a 2022 ram 1500?

@WaterFowler41

Жыл бұрын

Yup

Did you ever made a video how to install the bed truck rails because in this video you said you were going to make a video but I can’t find it. If you have a link please post it here. Thanks.

@WaterFowler41

3 жыл бұрын

Unfortunately I didn't. Time just got away. I'm thinking about doing a parts walkthrough on my truck in the next video and can talk through those lesser filmed projects I have done. If you have any questions through, let me know. Thanks! WF41

Is there any reason why these tie downs won't work with a Ford F-250?

@WaterFowler41

Жыл бұрын

No idea I dont have an f250 so I can’t provide much guidance

What size nutserts are you using and where did you buy them?

@WaterFowler41

3 жыл бұрын

I believe you messaged me on Instagram too but I don’t know the exact size of these. If you’re trying to fill the existing holes in the bed, maybe use a micrometer to measure them so you can purchase the correct nutsert diameter for them? Otherwise reach out to Deezee and see if they can give you some info.

@AngelGonzalez-ly2tg

3 жыл бұрын

@@WaterFowler41 After you messaged me I realized that the nutserts come in the package with the tie-downs. I actually bought some and installed them yesterday. Thanks for posting the video.

@WaterFowler41

3 жыл бұрын

Awesome!! How’s your hands? Mine were pretty sore after installing all the tie downs.

Thanks so much for this, the included instructions are complete garbage!