Thank you guys so much for watching the video! Let me know if you guys like the video in the comment section! Stay Safe and Ill see you guys on the next one!

@stevesvids

2 жыл бұрын

Flat off the wheel hub mount areas and the cars hubs with a bit of fine grit paper. Clean off and smear on a thin coat of copper grease. 🙂👍 Extra Pro. A lot of the corrosion on wheels, wheel hubs, brake callipers is from wheel cleaning chemical residues. Too much caustic chemicals. Bilt Hamber Surfex HD degreaser APC has good anti corrosion inhibitors. Great product for all automotive areas. 🙂👍

Tip: for a more effective action of products my advice is to use first a degreaser, then the iron remover and possibly a tar remover last

@karenissimocrandall9962

3 жыл бұрын

Seems right

@ClaimedLocket83

3 жыл бұрын

Tar remover before iron remover as iron particles could be hidden under the tar spots

@christophermagri3330

3 жыл бұрын

exactly my thought. Actually first a good rinse would not hurt. Rinse/degreaser/rinse/tar-remover/rinse/iron-remover/rinse/ironremoverwithbrush/rinse/gyeontirecleaner/gyeontireexpress

@amierasycap4870

3 жыл бұрын

@@christophermagri3330 iron remover function ? For rust or something ?

@StayBlessed87

3 жыл бұрын

Or just some vinegar and baking soda 🤣

Tip: do an initial rinse of the wheels to get off the loose dirt and grime before hitting it with the iron remover. Iron remover could've taken off anything underneath the grime.

@budlanctot3060

6 ай бұрын

Maybe for your situation, but not for every situation. Mine were 2 to 3x worse than these wheels, and I've washed them a dozen times with various chemicals, lots of brush agitation, and have yet to find the "magic bullet". Pretty sure, that once the iron/brake dust has been allowed to remain on the wheels long enough, there is no bringing them back without refinishing the wheel.

I do have to say its nice to see someone do this to wheels that are extremely dirty and not some wheels that get washed every week. I do agree with another comment that a hosing or pressure washing could have been done before the iron remover I don't think its a big deal.

Wrong order of products IMO. Wasting expensive iron remover first. Use the degreaser on all the wheel and tyre first. Makes the iron remover far more effective on the cleaner wheel and saves product.

@SETProtectiveFilms

4 жыл бұрын

roscopervis you got a point sir! I’ll keep that in mind ! Thanks for watching!

Very nice video. Just did this on my Dodge Ram 1500 yesterday. Brush attachment on my cordless drill did wonders for hard to reach spots. 👍

I just finish clean my winter rims/tires ... I thought my set were bad ... I used wheel cleaner and dawn soap ... applied turtle wax seal and shine after. Great video ... take care brother!!

FINALLY! ACTUAL SERIOUSLY NEGLECTED WHEELS! 👍

@SETProtectiveFilms

2 жыл бұрын

I hope I can get some more wheels that’s actually dirty!

Finally, I see a car detail that does the details like me: Tire/Wheels Removed and Clean them!! GC = Good Clean!!

Just curious....why use the small detail brush when you could use a powered drill and cone brush to get the bigger surface cleaner quicker with less effort and the medium nylon bristles dont scratch most surfaces

@SETProtectiveFilms

4 жыл бұрын

Oh yea thanks man I’ll try them on the next one!

@maksisdify

4 жыл бұрын

I usually use small detail brush to clean small spaces like where bolt goes or other tight areas

@CL4SSiCS

4 жыл бұрын

I think a small detail brush is safer...

@meanpaintandbody

4 жыл бұрын

They r a set of $100 rims I think is more for the video

Everyone: *uses car wash self serve brush with soap to clean the face and tires* Me: hold my bucket and brushes and wheel and tire cleaner, iron remover, and my tar remover

This has inspired me. Thank you for the demo.

This was really satisfying!

Oh my.. i really love this

Now that is a nice treatment! Well done bro. You made those rims and tires look fresh new and shinny! 🤝

great job man!!

@SETProtectiveFilms

4 жыл бұрын

Thanks Boss!

A good tool to get into the crevices on the back would be a dremel tool with a softer tip :)

@SETProtectiveFilms

4 жыл бұрын

Thanks Allan !

This is awesome you did a great job and you deserve way more likes and subscribers, so I subscribed and liked the video!

@SETProtectiveFilms

2 жыл бұрын

Thank you for the kind words!

So I had an issue where a shop used an imperial socket to remove my metric lug nut.... totally pooching the edges of the nut. Took it to a different shop to get this F up fixed. This entailed drilling off the head of the nut until the wheel could come off, then remove the stud from my hub. In the process, a LOT of oil was used and it stained my polished Audi RS6 Fat Five rim. I've tried a lot of cleaners and degreasers and nothing seems to work. I'm looking to try oven cleaner as a last resort. Any other suggestions to bring the shine back to this polished rim?

So satisfying!

@SETProtectiveFilms

3 жыл бұрын

Thanks for watching! Happy new year!

well done!

Cool video! Keep it up!!

@SETProtectiveFilms

4 жыл бұрын

D Q Details! Hey thanks for watching our video! See you on the next one 😁

Is there a way to get rid of the pitting after all the brake dust is removed?

Lest hit this video 1million views guys btw nice clean up

@SETProtectiveFilms

4 жыл бұрын

Franklin Ardiansyah wow thanks for watching! Maybe one day!

My car & my wheels...pretty cool, thanks

Cheaper to buy some new wheels...add some *bling*...nice work you did!!

@SETProtectiveFilms

3 жыл бұрын

I wish I have the money for new wheels lol. Thank you for watching! ✌️

Are wheel cleaning products that remove iron dust effective on brake disc? Mine has iron accumulated for at least 4 years, brands like Maguiar's, carpo and similar can do a good job?

@SETProtectiveFilms

3 жыл бұрын

Hey ! i believe if its on the break disc itll be tough and will take too long to remove , but im pretty sure itll help a bit if youre just cleaning it.

Me ha gustado mucho como lo has hecho.muy bien.

@SETProtectiveFilms

4 жыл бұрын

Thank you Amigo! Stay Safe!

Thanks for the tips. I found a great wool wheel brush on Amazon that works great on my Maserati GranTurmiso. Any recommendations on a wheel degreaser?

@SETProtectiveFilms

3 жыл бұрын

Hey! You can try the P&S brake buster it’s cheap and it works great . And some Iron or fallout remover. That’s pretty much all you need to clean your wheels! Thanks for watching

Excellent work

I’ve never used iron remover first but I will from now on for sure,good job

@SETProtectiveFilms

4 жыл бұрын

Dai Bennett yup give it a try! Thanks for watching !

What type of brush is that your cleaning with?

Great job

@SETProtectiveFilms

4 жыл бұрын

Oakley Auto Detailing ayy thanks for stopping by !

@MikesAutoDetailing

4 жыл бұрын

@@SETProtectiveFilms any time, everything.... see you on the next video

Here's my way of doing this. 1 high pressure washer only water. 2 super power (agitation a must, some wheels require 2 this step 2 times) 3 iron remover 4 super power again 5 ceramic coating Turtle wax. Hybrid ceramic coating 1. 6 tire dressing 303. Blessings from LA. Bendiciones 🙏🙏🙏

@SETProtectiveFilms

3 жыл бұрын

Thanks for checking out man! Stay safe !

Easy work

Safe to say the etailing brush was goosed after? lol Mint vid mate, enjoyed this. Just got soem STI wheels for my WRX, gonna be doing this to them in about an hr :D Subbed my bro xD

@SETProtectiveFilms

3 жыл бұрын

enjoy man!! thanks for watching! :)

Dammn I love watching videos in KZread I love doing the same thing I been doing this since I was 12 years old since right now I'm going to my 38 years old on July well sending lots of blessings from down south pharr Texas

Do you have drainage under all your garage flooring? How are you able to wash on top of it?

@SETProtectiveFilms

4 жыл бұрын

Dan hey yes! We do have a drainage . Swiss trax are pretty easy to disassemble and to put it back I just vacuum it once a while n

I did not see you’re putting chocks to the opposite wheels, for safety measures

@SETProtectiveFilms

4 жыл бұрын

some 2x4 is all I have haha

Those wheels were very neglected, and without using an abrasive polishing wheel you did a pretty good job.

Quick question, can you use conventional paste car wax on your wheels? I mean, some wheels are clear coated…?

Awesome videos!!!! Keep it coming.

@SETProtectiveFilms

4 жыл бұрын

Thank you gercy ❤️

Hey, what is the name of the stands that you put under the car to hold it up?

@SETProtectiveFilms

4 жыл бұрын

those are called jack stands

@NewarkNative25

4 жыл бұрын

Ok thanks.

Great video! what kind/brand of floor tiles are those?

@SETProtectiveFilms

3 жыл бұрын

Hey David thanks for watching! They are from Swiss traxx

What beat is that at the end ?

I really don't know why this kind of video is so relaxing but I love it

@SETProtectiveFilms

4 жыл бұрын

Thanks for watching dave!

cleaning winter wheels ....make sense xd

@SETProtectiveFilms

2 жыл бұрын

Hahaha should we do it again this year?!

Would a steamer be easier and faster?

Good stuff, I just did a wheel video the other day haha

@SETProtectiveFilms

4 жыл бұрын

oooh thanks man !! il definetly check ur channell out!

Tip use a jet wash it could get most of the dirt of quickly with out using or wasting any of your products

What Brushes are you using?

What’s brand/tools did you use to take off the lugs?

@SETProtectiveFilms

4 жыл бұрын

Hey man it was a Mastercraft kit

@hbkakqn

4 жыл бұрын

SET Auto Care Thanks, I still couldn’t find it. I’ve been trying to find tools like that for awhile. But I liked the video!

Zero naught steel wool works great for wheels that dirty and corrode.

@SETProtectiveFilms

4 жыл бұрын

you got it I ended up using them on the other wheels it!

Got some dirty wheels to clean but never so badly like yours. Did you use tire dressing both side or outside only? I always use wax to protect the rims, even cheap fk1000 is better than nothing. For me looks like these rims need to be restored anyway. :)

Amazing!! 👏🏻

@SETProtectiveFilms

4 жыл бұрын

Glad you like it!

Will the same products and process work on black wheels?

@SETProtectiveFilms

3 жыл бұрын

cruzzindodge sure it will! You can use some degreaser/wheel cleaner , and some iron remover. You will also need a softer brush or it’ll scratch the finish of ur wheels.

The Wheels need a respray :D

@SETProtectiveFilms

4 жыл бұрын

Haha yup👌🏼

I got one that may stump you what about a set of alloy rims with 35 years of wear how would I clean those

@SETProtectiveFilms

4 жыл бұрын

Deathkiller1408 0 damm 35 years ? you can still give it a good clean but It’s not going to come out 100% . But that will probably need to get re finish sand blast and spray a new paint/clear

🔥👍👍 top

@SETProtectiveFilms

3 жыл бұрын

Thanks man!!!

Do u guys know anything thing about Bugatti cause my dad broke his gear ⚙️ shifters

Great vid, but wouldn't it be easier and faster to have a drill with a cleaning brush on the end?

@SETProtectiveFilms

4 жыл бұрын

Mr. New Stuff yup definitely! I have one I just forgot to use it 😂

Is it okay to use wax on painted wheels?

@SETProtectiveFilms

3 жыл бұрын

Yess Sir!

Nice 🎉

Time for a vapour blaster... job done

Great video but once I saw those where Honda rims I clicked off 😪 smh

@SETProtectiveFilms

4 жыл бұрын

love scars lmao 😂

Should have used a tar remover and a clay bar. But they do look a 100% better

@SETProtectiveFilms

4 жыл бұрын

Jason Deal thanks for watching man! But yes to clay bar ! I just didn’t want to use it on this wheels since it’s just my daily! And sadly I don’t have any tar remover at that time.

@stevenquintanilla9795

4 жыл бұрын

@@SETProtectiveFilms definitely invest in a tar remover. One of my favorite products and worth the cost! I love carpro tar x. My car stays outdoors and gets lots of tree sap on it because of the area I live in. Tar x melts it right off, none of the other typical detail products I use have any effect on it

@SETProtectiveFilms

4 жыл бұрын

@@stevenquintanilla9795 stoner works fine too and i also have gyeon tar but just ran out! will put car pro tar on the next to buy list!

@stevenquintanilla9795

4 жыл бұрын

@@SETProtectiveFilms nice! Sorry I misread your original response as you don't use a tar remover. I'm sure those you mentioned work just as good as tar x. I was actually wanting to try Stoners as it's cheaper than tar x

get some ‘indigo 10 concept’ it’s class

You got busy but I’m using a drill with some kind of attachment brush and pad

Good to see someone scrubbing the tires aswell. I cringe when i see people "deep" clean wheels, not bothering to clean the tires, and then proceed to dress said tires.

Really good video and satisfying, but your rims need a respray

@SETProtectiveFilms

3 жыл бұрын

Thanks man! But yea re spraying is Not worth it I ended up using plasti dip and used it for winter 🥶

@davefilms345

3 жыл бұрын

@@SETProtectiveFilms ahh fair enough mate

Small thing , alloy wheels should have stick on weights on the inside of the rim, hidden behind the spokes. Stay well, stay safe

@SETProtectiveFilms

4 жыл бұрын

Thank you Stephen!

@None-kv7sd

3 жыл бұрын

If they have a lip on the outside of the wheel then you damn well hit weights on there. Unless the person states otherwise.

I wash and wax every couple weeks But I think I’ll do this on rims also now

What nmd are you wearing?

@SETProtectiveFilms

3 жыл бұрын

I don't really know what is called. so much colour way are coming out now a days

@Tommy369x

3 жыл бұрын

@@SETProtectiveFilms It's nice, your video and shoes

I would’ve use dawn and power drill brush

Tracklist please? Amazing music.

Would have rinsed the wheels after using the iron remover, you are rubbing all the dirt against the wheel and therefore scratching it..

@SETProtectiveFilms

4 жыл бұрын

The wheels needs to get refinish . And Might as well get all the iron remover stay there and use all the cleaning power it has. If it’s a better wheels of course we’ll wash it a diff way. Thanks for watching 🙏

A lot of work for stock Honda wheels

Good effort but it's refurbishment time

@SETProtectiveFilms

4 жыл бұрын

Yup they do but I don’t think I’ll be spending money for that! Well just keep it clean!

You can use this on steel wheels

Why the detail brush and why not a wheel brush? Just seems like way more work for no reason.

@SETProtectiveFilms

4 жыл бұрын

M_Spoon Vacuums & Detailing I do use wheel brushes and have bunch of them . But there is something about the detail brush I just like using them !

@BelLavoroAutoSpa

4 жыл бұрын

@@SETProtectiveFilms Gotta do what works for you then. They came out great 👍

Music?

oN 6.56 i see a dangerous crack on the tyre near the rim. That tire is gone. Change it.

You need harder and bigger brushes for rims

@sammyn9345

3 жыл бұрын

Harder is bad They cause scratches

Why not a powerwasher?

Bro the thumbnail look like gold rims lol but it aint hahahah

@SETProtectiveFilms

3 жыл бұрын

ScuffyxD lmao 😂

Tuner lugs on stock wheels 🤔

@SETProtectiveFilms

4 жыл бұрын

Haha thats all we have !

Blasting the bulk of the dirt off the wheels first would have been a huge help

Come on man where’s the impact? 🤦🏼‍♂️

First thing we do is to remove the plastic centre cap

Aqui no Brasil temos produtos melhores que esse pra limpeza pesada de rodas e motores de veículos!

If you see a dog that's black and brown running towards your car move your car cause its gon sh*t explode on your wheels

@SETProtectiveFilms

4 жыл бұрын

😂

@doozeschanyt9554

4 жыл бұрын

@@SETProtectiveFilms lmfao

Fore those who wants to totally rim restore, you can sandpaper with high stone ratio 5000 10000 ,then you can get rid of these stains from the inside of the rim, try out first on rim you have , you can get more money for that, if the Customer wants a restore, maybe for sell this car

@SETProtectiveFilms

3 жыл бұрын

Good Tip Florian! :) Thank you for sharing your knowledge

limpiador de chimenea y listo

Pretty nasty, neglected wheel barrels. Unfortunately, mine are even worse. Original/previous owners ignored mine for probably 14yrs. That iron/brake dust can permanently damage the wheel finishes when it's allowed to remain on wheel surfaces.

use straight up acid on rims that knackered not high end detailing products

@SETProtectiveFilms

3 жыл бұрын

Haha but where’s the fun on that? If use that it’ll be. 1 min video 😂

Who ever had that car ran over some people

@SETProtectiveFilms

3 жыл бұрын

lmao

i wouldn't trust a bit to the plastic floor under the jack stands

Let's be true...nobody searched for this

@MrOndrof

3 жыл бұрын

I did

At the beginning step it is much more rational and appropriate to have power washed the looser debris and caked on dust before using rim cleaner. That way you don't have to go back for seconds with the rim cleaner if that is your usual M.O.

No clay bar. I wouldn’t put those wheels back on with the backs looking like that

@SETProtectiveFilms

3 жыл бұрын

I hear you man . The wheels are no where near perfect. Didn’t want to waste a clay bar to be honest . Plus it’s our shop car 😆.