Thank You Very much,i love old Athearn BLUE box locomotive❤

Thanks Dave. I was asked to look at an Athearn DC chassis and motor like this one today for my local club. Your strip down helps confirm what I had worked out. Someone has changed the motor mount on this one so not sure if I can fix it. Your informative strip down helped. Thanks. Happy Modelling Mon

I used to take off the dynamic brake housing, put the main body shell back on, then run all the wires, then snap the dynamic brake back on. Saved me the “routing wire” nightmare. Loved the video my brother.

This is cool, awesome video.

Nicely done. Gives me hope when I do mine. Thanks sir.

Another remarkable video, bravo. I don't have the budget--temporal, mental and fiscal--to convert to DCC. I'll be happy being DC til I die. 😎

A useful style of LED to look out for are whats known as "top hats". As the name suggests they are shaped with a shoulder and flat top, ideal where there was no existing bulb. You carefully drill a small hole and these fit flush. When you see them you'll know what I mean. Even after a lifetime of messing with electronics, you still can't beat that "YES!!" moment when you stick a few bits together and it works when powered up. Well done Dave. 👍

@ScottRails

11 ай бұрын

Thanks Gerry. I'll look those bulbs up.

How exciting Dave! Well done and have even MORE fun playing trains...

There is yet another useful class of LED's, 1.8 mm diameter. You can install a pair of them in each of the front and rear light 'holes' on the Athearn diesels, just need to drill the holes a shade larger. With two independent lights installed you can set one to be a regular headlight and one to be red light or a Mars light or a Gyralight.

@ScottRails

11 ай бұрын

I've ordered some micro leds from China. Would love to install ditch lights if possible. Will need tiny lenses for them

Loved this video. Thank you!

We upgraded an old Athearn blue box F7 to DCC with sound and LED lighting but also upgraded the motor. The new motor draws a lot less power and is much quieter. Those old blue box engines run great, but the downside was always the power usage and the noise.

@ScottRails

11 ай бұрын

That will be something I'll look into in the future. baby steps.

Now try that with an N scale loco! 😁 A lot less space as has been my experience but still quite doable. So nice to have all that space in these Blue Box locos. And that 3d printed holder is a great idea.

great job

Am I the only one who always think of Brian Cox (the actor), when I see this guy talk about trains? :)

@ScottRails

5 ай бұрын

Which guy?

@jau1976

5 ай бұрын

@@ScottRailsThe actor www.google.com/search?client=firefox-b-d&q=brian+cox&si=AKbGX_qW2y9h6PBi7Qiy763JS402REyO5O8Whx1p4399uw6SeA2JFa46L_ssdR_Kqji2-mBMV90WUwWHzX-rmhfxOFO9XWXW8-JBQ4YsUW_JBwFmCTq-ApY%3D&ictx=1&ved=2ahUKEwj53fzSyPeEAxVRXvEDHWfHCK4Q_coHegQIOBAD

Nicely demonstrated! Really enjoying taking the journey with you (as someone without a layout😔)

Awesome install of the decoder. Thx for sharing

Been trying to find a good detailed video on how to install for a beginner...thanks so much.

@ScottRails

11 ай бұрын

If there's anything I missed, or can improve , let me know. I have lot of Locos to convert.

Hi Dave, a very useful and instructional video as I am dabbling in some American HO. I inherited some from my late brother and disposed of some (including a Dash9 in BC) and with the remainder I thought I would do a small switching layout. I’ve had the opportunity to squire some more which included a blue box SD40-2 so I am tempted to convert to DCC as I also inherited a Digitrax system. I’ve watched other KZread videos, all very good but yours has given the confidence to have a go. I need to rewatch to identify suppliers of coders, LEDs and connectors. I’ve subscribed so look forward to other videos and I have put a thread in Western Thunder of my layout progress.

@ScottRails

5 ай бұрын

I have changed a few things since that video. I've started to use grain of wheat led bulbs which are tiny but just as bright, and have VERY fine wiring. I've not found a cheap way to get decoders yet. Looking at around $30 each for the basic digitrax decoders.

@MrCrankyChris

5 ай бұрын

@@ScottRailsmodelling is all about refining, sounds as if you are doing good work. Are you going to let on as to your suppliers of the decoders and fine wire?

@ScottRails

5 ай бұрын

@@MrCrankyChris Ali Express for the led's and I get my decoders locally. Not found anywhere online cheaper.

Now you get to learn how to consist!

u can use dish soap to put the little rubber bits into the frame. The soap dries out and rubber bits are in.

@ScottRails

11 ай бұрын

Thanks, that's great to know.

I'm about to do my first conversions, this was very helpful. Thanks!

Hello Dave great video and very well demonstrated.

Nice job Dave.

Dont you love it Dave when a part flys accros the room and it takes forever to find it,,,i know the fealing did it a thousand times

@ScottRails

11 ай бұрын

I'm thankful for laminate flooring.

Very well done. Learned a bunch that I will apply to my fleet. What brand is the wire stripper and where did you get it?

@ScottRails

9 ай бұрын

I think those strippers came from Princess Auto here in Canada. Nothing special.

Most enjoyable presentation. Very smooth and easy to follow. Where did you find the Athearn 3D printed decoder holder? That was a cool product!

@ScottRails

8 ай бұрын

I found the file on Thingiverse and printed it. I have since found a better one.

Hey, if people can figure out how to get speakers into N scale locomotives, fitting one into the BC Rail loco should be a breeze!

@ScottRails

11 ай бұрын

You have a very good point.

What Digitrax decoder did you use? I've got several ALCO C420s I've got to convert.

@ScottRails

11 ай бұрын

DH126D . Very basic. Only does motor and lights. It could probably do any of the older DC locos from what I can see.

WHITE TO WHITE , RED TO RED , BLACK TO BLACK , BLUE TO BITS

@ScottRails

11 ай бұрын

What about grey and orange?

@shakeyhandsshedmodelrailwa2494

11 ай бұрын

🤣🤣🤣@@ScottRails

Seems as if all you have is a decoder which does the same as if you were using DC. Now if there was sound added it would be something special otherwise it's not for me. Note: having the trains moving in opposite directions is cool I would just use another track side by side. thanks for the heads up.

@ScottRails

Ай бұрын

Not sure why you are watching a video about DCC installs if you have no interest in DCC. For me, sound is not that important. I like DCC for the ability to control multiple trains on the same track at different speeds and different directions. I also like the lighting functions available on DCC, flashing, strobing, dimming etc.

Thanks for the tutorial. I have a couple of blue box GP-38's I'm going to put decoders in. Can you tell me where you got the 3d printed decoder bracket from? They make the job a lot tidier. Take care. Sean.

@ScottRails

11 ай бұрын

Hey Sean. I printed it myself, or are you asking where I got the stl file?

@seanspennywisemiserrr

11 ай бұрын

I am curious as to where you purchased it? Unfortunately, I don't have a 3D printer. So, you acquired a file and printed it. It's amazing how much the hobby has improved because of 3D printers. Are you able to provide a link for the Decoder platform?

Dave if you need some Kapton tape let me know because I have some

@ScottRails

11 ай бұрын

It's just sooo expensive James. Do you charge by the inch or MM?

@hirsutusi5536

11 ай бұрын

@@ScottRails - not Chinese Kapton tape

Could not locate the bracket for decoder and wires on thingiverse....what was it called?....thanks!

@ScottRails

7 ай бұрын

If you do a search for Athearn you should find it. There's a couple of options now. Here's a link to the one I like now. www.thingiverse.com/thing:5545083

Steam engine has tonnes of room for speaker in tender😂

@ScottRails

11 ай бұрын

And it already has the electrical pick ups, hmmmm

Scott, do you have the print file for the decoder holder? I would love to give it a shot.

@ScottRails

4 ай бұрын

There's a bunch of them on Thingiverse. Depends on where you want to mount it. Search for servo motor mount.

@marekhabel2493

4 ай бұрын

@@ScottRails My printer is quite slow, I rather go for a proven design. If you would have the file number that be great

Why use flux when there is flux in the solder core?

@ScottRails

8 ай бұрын

Is that a rhetorical question?

All you have to do is cut the tabs off the bottom pickup bar...

@ScottRails

7 ай бұрын

Yes, that's an option. I just prefer to do it this way.