If I have a 3d printer I would make an carrier and a fleet of sbd's

@blue-jr4iv

2 жыл бұрын

im buying a printer because of you

@principaljoga9817

2 жыл бұрын

@@blue-jr4iv nice lol

@Skyprince27

2 жыл бұрын

Imagine 3-D printing a 72nd scale aircraft carrier from World War II? That would be epic!

@Dawgsofwinter

2 жыл бұрын

@@Skyprince27 I've seen where people are doing similar things already. No CV's spotted yet but plenty of subs, destroyers, and cruise liners. Most of them are being done up as RC too.

@Skyprince27

2 жыл бұрын

@@Dawgsofwinter Cool! I’ll certainly be on the lookout for stuff like that coming out in the future!

Beautiful model of an amazing plane. I hope you do more epic WWII planes... maybe the F4U Corsair, the P-38 Lightning, and the P-51 Mustang!

@fab365_official

2 жыл бұрын

Please vote on this. fab365.net/requests/3510234858/P-51_Mustang_I_think_some_aircraft_from_World_War_II_up_to_modern_day_would_be_amazing_to_3D_print_considering_there_are_current

That plane was one of the best and the most accurate

@fab365_official

2 жыл бұрын

Thank you for watching and comment. I will do my best.

Very impressive, since the canopy is a single component I hope you also do a version with an open canopy as most of the time they dove with them open in case they had to bail out.

@fab365_official

2 жыл бұрын

Thank you! I will upgrade some day, if this design sales are good. :D

@hlcepeda

2 жыл бұрын

And if a 3d print of the canopy could be made from _clear resin_ and be printed thin enough (read: 'hollow' i.e., not a solid 'plug')... 🛩️😊

@RetlocGaming

Жыл бұрын

@@fab365_official They also (Pilot and Tail Gunner) used open canopy as when they dove the rapid change in temperature from inside the cockpit to the outside would more than often fog up the cockpit.

@RetlocGaming

Жыл бұрын

@@fab365_official Please also make a version with a tailgunner.

@-thousand.yard.stare-

Жыл бұрын

@@fab365_official I wish I could get one.

That would be awesome to see this painted and weathered.

@fab365_official

2 жыл бұрын

I'm very bad at painting. But, I hope my customer can paint.

When I saw that you posted the .stl, I nearly screamed out of joy. I'm gonna 3d print this tomorrow, as soon as my current print finishes. You've gained a sub bro.

@fab365_official

2 жыл бұрын

Thank you! I’m happy that you like my design!!! I hope you enjoy~ 😆😆😆

@foamfpsguy6316

2 жыл бұрын

@@fab365_official It cost money so I can't print it lmao

wow they exceeded my expectations

@fab365_official

2 жыл бұрын

Thanks for your comment! Please enjoy!

Very well produced video! I will have to use some of these techniques in future time lapses.

@fab365_official

2 жыл бұрын

I expect your video~ thanks!

I want so many more of these. The one I've suggested on the website is a Fw190 A, but I'd also like to see just, generally more WW2 Aircraft. I'd gladly pay to be able to print them and put them on a shelf to stare at and play with. My (mostly) full list includes the P-51H, P-47 D25, B-29, Bf-109 G, Ju-87 D, Me-264, Yak-9, Il-2, Pe-8, Spitfire Mk V, Mosquito Mk VI, Lancaster Mk III, A6M2, D4Y2, and Ki-49. I know that's a lot, so if you do make them, maybe do one country or type of aircraft at a time whenever you want, we'd much appreciate them. A lot of people love WW2 aircraft, and I really look forwards to more.

very nice print, I like the moving control surfaces

@fab365_official

2 жыл бұрын

Thanks for watching!

@icebaby2821

2 жыл бұрын

British Virgin Islands 🇻🇬 American Virgin Islands 🇻🇮

Amazing! Brilliant! Incredible! I need more words. Very good work, the moveable control surfaces add a lot of realism to the model. I'm an aviation nut specially for the WWII airplanes. Congrats. Well done.

@fab365_official

9 ай бұрын

Thank you so much for watching and comment!!! I will make more WWII airplanes. Please look forward to it~

3D printing is changing the face of a few hobbies. Most interesting for me are scale modeling, tabletop games , and RC Edit got to wonder how long before the big modle makers get smart enough to start selling modle and parts print files

@zerstorer335

2 жыл бұрын

I think the big ones are going to see some serious lag, because their bread-and-butter is still the hobbyist who'll spend up to $50 on a kit ($100, if they're feeling fancy) but isn't in a position or mindset to buy and support a 3d printer. I think we may see it starting in smaller companies where 3D printing means they only have to do the research and design, letting the customer do the manufacturing. That could especially be the case for companies like Custom Dioramics where they're coming up with a lot of their products, so they can focus on creating eighteen different kinds of walls because they don't have to do research.

Looks cool, keep it up 👍🏻

@fab365_official

2 жыл бұрын

Thank you~ I will do my best~

That is freak'n awesome!

@fab365_official

2 жыл бұрын

Thanks for your watching and comment!

The best 3d printer youtuber ever

@fab365_official

2 жыл бұрын

Thank you so much~ I will do my best!

Nice job very cool .

@fab365_official

2 жыл бұрын

Thank you~ Please enjoy~

Print the me-262.that’s great!

@danielaguilar7570

2 жыл бұрын

Sería genial

This is so cool to look at👍👍👍

@fab365_official

2 жыл бұрын

Thanks for watching! Please enjoy!

U make some awsome stuff like ur videos watched every single one just amazing I'm definitely gona be ordering some stuff from ya I'm thinking about getting a 3d printer idk what the cheapest good one to get

@fab365_official

2 жыл бұрын

Thank you! Please check my website, fab365.net

Nice job.

@fab365_official

2 жыл бұрын

Thanks for watching!

very beautiful

@fab365_official

2 жыл бұрын

Thanks a lot! Please enjoy!

I luv these vids

@fab365_official

2 жыл бұрын

Thanks for watching!

super print quality

@fab365_official

2 жыл бұрын

Thank you~ please watch and enjoy~

This is 2 cool!!

@fab365_official

2 жыл бұрын

Thank you! Please enjoy!

very nice

@fab365_official

2 жыл бұрын

Thanks for watching~ 😁

@krzysztofbogusz6983

2 жыл бұрын

is this plane a S B D-3. ?

Excelente diseño.

@fab365_official

2 жыл бұрын

Thank you so much~ Please enjoy!

This is really cool! You should try and make a scale model of an airliner like a Boeing 737

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Figo!

Magnífico

@fab365_official

2 жыл бұрын

Thank you for your comment! Please enjoy!

I hope you do a F4U CorsairI would love to see it

@fab365_official

2 жыл бұрын

If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests Thank you~

Well I'm a huge fan of of aircrafts well I also like World War II aircraft too.

Guys this is amazing, I love Douglas dauntless since forever! I want to buy a model already printed. I'm not interested in drawi gs for printing. How much for it. Please asume shipping to Mexico. I'll pay in advance. Kudos! Excellent work!

That is Cool...

@fab365_official

2 жыл бұрын

Thanks for watching! Please enjoy!

Dang! It's like you made an entire Revell model! I still have my Revell model, but I've never got to building it. Do you have part downloads? Edit: Never mind. I saw you have the part downloads. What programs would you use to open them, though? I'm not experienced with 3D printing.

She's a beauty! Any plans on more aircraft?

@fab365_official

2 жыл бұрын

I have many plans. but Depending on the outcome of this sale, the plan will be different.

This is so cool!!! next could you try a military helicopter! Please!😁❤️

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Make the Focke Wulf! Great print btw

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

I want that plane!

Where does he get all these wonderful toys?

@fab365_official

2 жыл бұрын

Fab365.net

I am so satisfied now

@fab365_official

2 жыл бұрын

Thanks for watching! Please enjoy!

@Scissorsguy

2 жыл бұрын

I enjoyed the sounds

👍👍

@fab365_official

2 жыл бұрын

😁😁😁

👍😊💕💕💕Like

@fab365_official

2 жыл бұрын

Thanks for watching!

Could you 3D printed the canopy in clear plastic.

Ohhh do a Bf-109 next

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Just wondering, do you like glue or cement the parts or no?

@fab365_official

2 жыл бұрын

I use this glue. shop.fab365.net/products/loctite-super-glue-easy-brush-on-spreadable-applicator-5g-%EB%B3%91

you guys are very lucky you have 3d printers and stuff

@fab365_official

2 жыл бұрын

You can buy 3D printer and become a lucky man!

@roltesayre5028

2 жыл бұрын

@@fab365_official i don't have money buttt i can work hard and get some cash

Three words: *I want this*

SU-6 👍

@fab365_official

9 ай бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Once you buy the stl you can print it multiple times right?

@fab365_official

2 жыл бұрын

It's ok if you don't sell it.

@Tweetsix

2 жыл бұрын

Thanks for the info

Hey how much would you charge for one of those planes

이건 바로 구매 각이네요. 아직 한국 서비스 점검중인가요?

@fab365_official

2 жыл бұрын

결제 시스템을 추가하는 데, 시간이 좀 걸립니다. 하지만 이것은 무료 디자인으므로 결제하지 않으셔도 됩니다~ 출력하시고 리뷰 부탁드립니다! 감사합니다!

💕👌👍

@fab365_official

2 жыл бұрын

😁😁😁

@makewithmegma

2 жыл бұрын

@@fab365_official ❤👍

😁😁👍👍

@fab365_official

2 жыл бұрын

😁😁😁

This is amazing as ever, if you're starting an aircraft series could you maybe do a spitfire or Mustang next? I would love to see those 👍

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Wish that this was on sale

@fab365_official

Жыл бұрын

You can download from Fab365.net and print. If you don't have 3D printer, it's time to buy one. Please enjoy!

Which 3d printer do you use friend? ):

@Zyron_Guy01

2 жыл бұрын

It's litterally on the title: *"Prusa"* I believe *"Ender 3"* is next

I liked you did the same. the "Revell" company. that sells various models on the Internet. 😀👍

1:14 is my favorite part

@nakajima4058

2 жыл бұрын

Bomba

Can we order these

Is that a Heckcat Plane?

@fab365_official

2 жыл бұрын

SBD Dauntless.

3

@fab365_official

2 жыл бұрын

😁😁😁

Make a B-17 bomber

@fab365_official

9 ай бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Faltou a cabine do piloto funcional

Dude Do the Ju-87B or Ju-87G Kanonenvogel

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Why not show the printed parts in a more closeup way and longer. Is the quality so bad?

Can you 3D print a Dodge Charger

@fab365_official

2 жыл бұрын

I already made. kzread.info/dash/bejne/aIOj0sGAqqXKhaw.html Please enjoy~

How much do you what for 1

Será muy moderna la impresión de modelos en 3D, pero nada se compara a los moldes de plástico inyectado, tienen mucho más detalles que estos. Además en el modelo del video, las líneas en todo el modelo que simulan los paneles, están fuera de escala, más bien parecen zurcos de campo agrícola. Otros detalles, la cabina no es transparente y no se puede detallar el interior de la cabina. Los puntos a favor del modelo 3D, facilidad de armado, no tienes que lijar nada y muchas partes móviles. Insisto, prefiero los moldes de plástico inyectado.

Awesome model! Do you know what the total print time this took?

@maybeidkwhy

2 жыл бұрын

i wanna know too

@Joshplv

2 жыл бұрын

@@maybeidkwhy The total print time is around 22 hours for all the parts, you can see them on his site

@fab365_official

2 жыл бұрын

Thanks!

What’s this piece? 5:21

@fab365_official

2 жыл бұрын

Antenna.

BUT !!! Dose it fly ???

@fab365_official

2 жыл бұрын

😅

My 12yo's dream

Stuka please!

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Lockheed Electra 10, Amelia Earharts plane.

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Hi I have a question Can you edit a model for me?

@fab365_official

Жыл бұрын

I don’t have enough time. 😅

@lucasmayer5809

Жыл бұрын

@@fab365_official I do not understand English can you translate this in german

#fab3653dlover

Can u make f15

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Hey make the b5n kate❤

@fab365_official

Жыл бұрын

If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests Thank you~

Imagen you did a train

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

오우 설마 cas즐기는 비행기인가?

@fab365_official

2 жыл бұрын

Cas가 뭔가요?

@shield_of_zeon

2 жыл бұрын

@@fab365_official 워썬더에서 미국트리 이용하는 사람들이 죽고나서 폭격기로 복수하는걸 cas라고 합니다.

@shield_of_zeon

2 жыл бұрын

@@fab365_official 독탱유저들은 cas를 재일 싫어하죠 저처럼....

@shield_of_zeon

2 жыл бұрын

@@fab365_official 대표적으로 콜세어라는 폭격기가 있습니다.

@fab365_official

2 жыл бұрын

오~ 그런 뜻이 있군요~

hello

I like to see the f-16 or f-14,f/a 18 f

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

can u make zero fighter

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Let’s see you build a printed steam locomotive

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

When midway

@fab365_official

2 жыл бұрын

Yes, midway~

I dare you to make an F-35B

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Sdb 2

Iam the first one

Make flippy rage

Do a stiker

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

Fly?

@fab365_official

2 жыл бұрын

😅😅😅

You should stop printing everything in the same spot in the middle of your heatbed. Otherwise you will wear it down and loose bed adhesion at this spot really soon.

@fab365_official

2 жыл бұрын

Don't worry. I apply hair gel on it. The hair gel protect bed surface and enhance adhesion. :D

Some of japanese hates this video lol

@fab365_official

2 жыл бұрын

😆😆😆

UH 1 PLEASE

@adamrichardson7758

2 жыл бұрын

Omg yes, if he is to start an aircraft series I'd love helicopters as well

@williamjosecalaherreno3365

2 жыл бұрын

@@adamrichardson7758 I totally agree

@fab365_official

2 жыл бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

@williamjosecalaherreno3365

2 жыл бұрын

@@fab365_official yes

Just missing servos and a moto

@fab365_official

2 жыл бұрын

😅

@eliasalvarez295

2 жыл бұрын

@@fab365_official I was thinking, can i help to make the train?

What's with the thumbsdown again?

Mas dikan pesawan Rusia tahu 1944

Awac

เครื่องบิน100,000

Print it