Foldable F-22 Raptor print on prusa
Ғылым және технология
STL- fab365.net/items/267
In response to numerous requests from customers, I designed the F-22 Raptor for 3D printing.
STL- fab365.net/items/267
The main features are:
1. The missile hangar can be opened and closed.
2. The angle of the wing flaps can be changed.
3. The angle of the horizontal tail wings can be changed.
4. The angle of the thrust vectoring flap at the rear of the engine can be changed.
5. Landing gears can be equipped.
Precautions to be taken when printing and making are as follows:
1. When printing wings, it is recommended to use a brim so that it does not fall off the bed during printing.
2. If the brim is not cut accurately, the parts may not fit well, so please remove the brim carefully.
3. The flap of the main wing is not designed to move, but is designed to be attached to the user's desired angle.
4. Hold the thrust vectoring flap at the rear of the engine with pliers and turn it into place.
1 : 72 Scale
Largest part in printing, size = X 93mm, Y 130mm, Z 132mm, After full assembly size= X 194mm, Y 263mm, Z 73mm
Пікірлер: 71
The engineering you put into your creations is just stunning. Absolutely amazing!
@fab365_official
2 жыл бұрын
Thank you so much for your comment! Please enjoy~
@SpikeSparklemlp
2 жыл бұрын
Me envia um pelo correio de presente?
The F22 prints so well. Excellent design again!
@fab365_official
2 жыл бұрын
Thank you so much! Please enjoy!
Nicely designed model.
@fab365_official
2 жыл бұрын
Thanks for watching! Please enjoy!
This is amazing! I am definitely getting this. Now all I need is a F-35
@fab365_official
2 жыл бұрын
Thank you very much! And please ask F-35 on request page. fab365.net/requests
Absolutely facilitating. Phenomenal work buddy. Mind blowing talent
@fab365_official
2 жыл бұрын
Thank you very much! I hope you print and enjoy~
Realy COOL, im New at 3d printing, but this is something i want to trye, many Even make a bigger scale. Awsom dude 🤟
@fab365_official
2 жыл бұрын
Thank you! I design for 3D printing newbee. This is very easy. Please enjoy~
Love it! Would also get the F35
@fab365_official
Жыл бұрын
If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests Thank you~
Tremendous well done, I do wanna see for the Su-37 Flanker-F model.
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~
Very nice. However you had the opportunity to improve existing model flaw which is fixed landing gears. Could have retractable landing gears as well. This would have been perfect.
heyo fab365, im a huge fan of your videos, i binge them everytime a new one gets uploaded... anyways, wantd to ask if you would be able to design a 3d printed Kitfox Series 7 STi with Bush Upgrades, or maybe a Piper J3 Cub / Carbon Cub. I would absolutely love seeing the Results !!! :) -Glitch
is star scream
Amazing
@fab365_official
2 жыл бұрын
Thanks a lot! Please enjoy~
Nice~!
@fab365_official
2 жыл бұрын
Thanks for watching~
Nice👍👍
@fab365_official
2 жыл бұрын
Thank you very much! Please enjoy!
this is nice
@fab365_official
2 жыл бұрын
Thank you! Please enjoy~
Man you are my idol 😍😍😍😍
@fab365_official
2 жыл бұрын
😁😁😁
Awesome
@fab365_official
2 жыл бұрын
Thanks for watching! Please enjoy!
You forgot the missile doors, lol. I don't reeeeally care, but I just wanted to point that out. They pop out on the side of the fuselage, just near the back of the cockpit.
I wonder if this would work on a Resin printer...
PLS TELL ME HOW TO GET THE PRINTS LIKE THIS!!
Omg it's the Ford raptor f150 srs
👍😊💕💕💕💕like
🔥💕👍
@fab365_official
2 жыл бұрын
😄
The wings on my model are different - the ailerons are too wide to allow the wing to fit flush with the body? Mine are like the ones at 0:20 which are not the same as the ones fitted to the fuselage at 3:15. Examine the pieces that fell loose at 0:23 with the ones attached to the wing at 3:15. Completely different shape!
@DaiBach99
Жыл бұрын
You'll be telling me next that they are just supports! 🤦♂
@fab365_official
Жыл бұрын
😅
No está gratis??
Can the removed parts be stored in the bomb compartment?
@fab365_official
2 жыл бұрын
Can't 😅
@aryanparri
Жыл бұрын
@@fab365_official are there any weapon attachments for this?
Que filamento uso??
How much filament did it end up taking?
@nwakolpo
5 ай бұрын
depends on the infill. To use less material, use one that is completely solid - no transparency. It took around 160 grams for 30 infill (only for the plane without the base). Still I don't recommend you this model. There are many problems with it.
If I increase the % will it still fit together?
@fab365_official
Жыл бұрын
Bigger is better!
@johndavis7671
Жыл бұрын
@@fab365_official bought f22 and f18
Make the f35 B please 🙏🙏🙏🙏🙏🙏🙏🙏
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~
Que tipo de numero de boquilla esta echo
@fab365_official
Жыл бұрын
I used 0.1mm nozzle.
can you make su 57
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~
1/48 plz
Pls make my dream car "chevy camaro"
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~
Does it cost anything to print these?
@veriatech
2 жыл бұрын
There are many costs involved in 3D printing. First, you have your 3D printer, ranging in cost from $150 - $3000 USD. Next, you have filament, ranging in cost from $15 - $40 per spool. Last and certainly not least, you have the time it takes to print, which in the case of this model is significant if you print at the recommended .1mm layer. It'll take you a few days of time to print and put this model together. These are all based on my experiences over the last year of 3D printing, which have been very fun and rewarding for me!
@NR_Chasers
2 жыл бұрын
@@veriatech well thanks for the info.
한국인이셨어요?
@fab365_official
Жыл бұрын
그렇습니다! ^^ 3D 프린팅 사업을 오래했는데, 한국에서 보다는 해외에서 더 많이 알려지고 있습니다.
3d print pinoy jeepney please brother
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~
I don't recommend this model. It looks good, but has many problems. The parts don't fit well. Also there are many considerations that are not taken into account by the person designed it. I give it an average grade.
Print a c-17
@fab365_official
2 жыл бұрын
Could you ask or vote on my request page please? fab365.net/requests Thank you~