Have used these when I was concrete cutting in Darwin it's such an impressive bit of kit the concrete or rock only makes minimal sound when it cracks. The sound of the 3 phase hydraulic pack is the loud bit

@A1986Ge1995

7 жыл бұрын

You should hear the air powered pump.

@ xDerBomber67: Yes of course, you can splitt granit, marble, sandstone, concrete, reinforced concrete and rock!

@lordcapucino of course! And there are lots of other applications where the splitters are very useful!

i have use one in early 90s on bridge pier demo . worked pretty darn good

@dardagmbh413

6 жыл бұрын

Thank you Paul for your comment. Please continue to recommend us and our tools! :-)

do you do pipe cutters or breakers?

What are the current general applications of this technology?

The reinforcements will break under the splitting operation as well! If not, you can use our HCS6 Combi-Shears to cut them. So, no problem at all!

Any ideas how to use it in underground (mine) works?

I agree that the drilling part isn't quiet and dust free, but quiet compressors do exist and with quiet I mean VERY quiet. Those compressors use a compressor similar to those found in fridges (actually you can use a old fridge compressor to make a low budget quiet compressor), the downside is that they are expensive and have low debit (high debit versions use several compressors making them very expensive).

They work great in rock quarries when you're trying to not make a mess. the worst part is the jackhammer that drills the hole. THAT thing makes a racket and tons of dust. Still, it does make for a controlled break and you can adjust it easily for the grain of the stone.

I know this brand when I was working for Hidrotek AŞ.We was the Turkish dealer and Ankara we made a big show.Succesfulls.

How it will be noiseless demolition when you need to predrill holes? I dont know method to drill holes noiselessly

@DardaGmbH

6 жыл бұрын

Piotr, try to use a core drilling machine or apart from that work with a dust extractor as an alternative to a traditional drill hammer.

pretty cool

can it work in trenches ? to break rock

so miners dont need explosives no more?

We use water under high pressure to cut them to pieces. No dust and nice square blocks, but very wet and very noisy.

@henktoornvliet5795

5 жыл бұрын

Taunter Atwill juh

i am sorry, but does it work well for concrete? i mean the re-bar is still there holding it together right and it will still be really really hard to get through or fully demolished.

@A1986Ge1995

6 жыл бұрын

In reinforced concrete it loosens it, however you still need a way to actually remove the concrete like a jackhammer or a pry bar or a machine.

Does your device work at hydraulic pressure about 620 bar? or >620 bar

@DardaGmbH

5 жыл бұрын

We work at a hydraulic pressure of 500 bar. www.darda.de/fileadmin/user_upload/02_Produkte/03_Hydraulikaggregate/Technische_Daten/POWER_UNITS_new_gb_web_0612.pdf

Great work there! Oh and a great day to all of you reading this! :)

Is it available in india

How do you drill the hole without noise, vibration or dust?

@DardaGmbH

5 жыл бұрын

If you drill your holes by a traditional drill hammer you of course cannot avoid noise, vibration and dust. But, there are alternative drilling methods possible: Try to use a core drilling machine or apart from that work with a dust extractor. And the Splitter itself does not produce any dust, vibration or noise.

عندي منجم جرانيت هل يمكن استعمالها

' how to prressure,,, air or oil

You can hear from the accent, that it is ;) GmbH is also a special form of a company in Germany, actually.

I am sceptical about the "noiseless" claim.. Surely the sound of the material being separated would generate some noise? The mechanism itself being silent is understandable, but the rock being silent is not.

@A1986Ge1995

7 жыл бұрын

SterTheDer like Swollen said: it is not noiseless nor dustless. You need to drill holes and the best method is with a jackhammer. A jackhammer is very noisy and it generates lots of dust, you going to need ppe for the workers and dust control for the public if you are working in a urban area, the compressor used to power the jackhammer is noisy. The power unit for the pump can be electric or air, if is electric is rather quiet, if is air then is very noisy, almost like a chainsaw. The quietest part of the operation is the material splitting.

Thus the split is being enlarged and ultimately waidend to its maximum.

Do you use jacks to run it or an aggregate?

@DardaGmbH

9 жыл бұрын

Joachim Osmundsen Hydraulic power units with a variety of drive systems are available for different applications and requirements. They can produce up to 50 MPa (500 bar) maximum system pressure. All of our splitting cylinders can be combined with each of our power units.

@veronicavero2165

7 жыл бұрын

Joachim Osmundsen 👎👨‍👩‍👧‍👦💣

interesting tool indeed

Where can one aquire one of these tools.

@DardaGmbH

9 жыл бұрын

Bobby C. Please contact our sales office team (info@darda.de) and you will get the distributer list.

Expression " Go to move a mountain" can be do now ;)

can it be use in demolition.... like building??

@DardaGmbH

7 жыл бұрын

Of course! Please see also our website www.darda.de ....

@DardaGmbH

6 жыл бұрын

Olá! It would be great to get your feedback in English language. Otherwise it is difficult to understand... Thanks!

@dardagmbh413

6 жыл бұрын

@Quillbro Durdus: Often there's no other chance than to use controllable tools! Even if they are sometimes not that fast as conventional demolition methods... but, you cannot use a wrecking ball everywhere!

Ist das ein deutscher Produkt?

Yeah man i was looking for this how much it cost and how many watts do u deliver to nepal

@DardaGmbH

6 жыл бұрын

Please contact our sales office via info@darda.de and you will get the requested information. Thanks!

@envypun7129

6 жыл бұрын

DardaGmbH thanks

Damn that sure beats my wedge and feather

@A1986Ge1995

6 жыл бұрын

Yes, it is however it is also very expensive. The complete kit is over $ 20.000 US. If you have a drill , good. If not you will have to buy a drill also, mo' money.

Why not Ayers Rock? ;-)

i used this tool in 1977 , removing cubes of concrete around the blast furnaces of weirton steel , weirton wv. during a furnace rebuild . to watch it in action is something to behold . the notion that its a clean use tool is not true . drilling blowing out the hole , vibrations , noise are there to get the hole for insertion of the rock splitter . the rock splitter is not a stand alone tool!

@dardagmbh413

6 жыл бұрын

We agree with your comment, if you drill your holes by a traditional drill hammer. But, there are alternative drilling methods possible: Try to use a core drilling machine or apart from that work with a dust extractor. And finally the Splitter itself does not produce any dust, vibration or noise. So, we think our argumentation is justified.

Does this cut granites. I have vast granite area that I need to mine and sell here in western Kenya. How can I acquire one?

@azurecreative

9 жыл бұрын

Xc yes

@KISIAKAHONGA

9 жыл бұрын

how much do you sell it?

@DardaGmbH

9 жыл бұрын

KISIA KAHONGA We have a distributor in South Africa. Just contact our sales office in Germany via infoatdarda.de and you will get the direct contact.

Our power units produce a maximum hydraulic pressure of 50 MPa (500 bar).

@tunjipeter2042

Жыл бұрын

How can I get it and at what rate, am in Nigeria.

How much does it cost for one set

@DardaGmbH

9 жыл бұрын

Chomrong Koy Please contact our sales office (info@darda.de) and you will get the details.

@violentnexus3563

6 жыл бұрын

So much, you have to contact them. Because the number wont fit in the comment's.

How can I purchase un México...?. Saludos

@DardaGmbH

4 жыл бұрын

Please contact our Sales Office via info@darda.de and you will get the contact of our dealer in Mexico. Thanks for your interest!

Sorry DardaGmbH but your description of the tool is not accurate. Part of your description says : dust free, well is not dust free because you have to drill a hole to insert the wedge in the wall or rock and if an air hammer is used then there is plenty of dust generated and I can say that from personal experience.

@dardagmbh413

6 жыл бұрын

We agree with your comment, if you drill your holes by a traditional drill hammer. But, there are alternative drilling methods possible: Try to use a core drilling machine or apart from that work with a dust extractor. And finally (as you may know from your own experience) the Splitter itself does not produce any dust, vibration or noise. So, we think our argumentation is justified.

@A1986Ge1995

6 жыл бұрын

I feel that the description is not accurate because a traditional drill hammer is the cheapest and fastest way to drill the holes necessary to split the rock or concrete. Using a core drill would add a significant amount of time to the process (time is money) and a dust extractor would also add more time and money expenditure to the process especially in reinforced concrete . As for the splitting operation I have to agree with the description in regard to the vibration claim, however as for the noise, not, because if a pneumatic unit is used the splitter is very loud and in a urban setting a mean to reduce the noise would be necessary. After having said all of that I have to say this: using the splitter is a BLAST LOL

Whats the cost of this machine

@dardagmbh413

6 жыл бұрын

Please get in touch with our sales office by e-mail via info@darda.de and ask for the distributor contact in your country. Then you will of course get a price. Thanks!

so you have to drill and then put this in and stand back and turn on then stop and turn off then remove. Seems more work actually

@DardaGmbH

6 жыл бұрын

Drilling is a work, of course. But, inserting the Splitter, shifting the lever and getting the concrete/stone splitted in seconds... What's the difficulty?

@josephvulgate3449

6 жыл бұрын

There is no difficulty in operating this wonderful machine if what I watched is true. Good work done@DardaGmbH.

your seller in india if then please send details

Sorry, can you split diamond with this device? I need it for my south african mine

@DardaGmbH

5 жыл бұрын

Yes, that's possible! Our distributor in South Africa can advise you. Please get in touch with our sales office via info@darda.de and you'll be passed on to the contact on site.

Can i split tropical hardwood tree trunks please

@DardaGmbH

7 жыл бұрын

Hi Chris! Our focus is on splitting concrete and natural stone but, theoretical it is also possible to split hardwood... We would be pleased to get your feedback when done :-)

But, TNT is not allowed everywhere!

100% German Quality! :-)

Why don't you mention the price on video

@DardaGmbH

6 жыл бұрын

Price in the video? We do not sell consumer products! We provide advice before making a deal. Our experts all over the world can offer you sound advice on your needs and then can make you an appropriate offer. As you may understand we do not sell off the shelf...

@buddyholland1427

5 жыл бұрын

THAT ENDS MY INTEREST......UR TOO SECRETIVE ..

@DardaGmbH

5 жыл бұрын

That's okay with us...

@aaronkerr749

5 жыл бұрын

I rent these dardas. They cost about 8k USD for a #8. They work well. I have 9 of them.

Can anyone provide dis on rent in India... If anybody knows about my query... den ....plz reply

@dardagmbh413

4 жыл бұрын

We have a distributor in India that can advise you. Please get in touch with our sales office via info@darda.de and you'll be passed on to the contact on site.

In our country, we use sledge hammer, and voila! (4 feet x 4 feet reinforced beam can be sledge hammered with a few drops of sweat).

@A1986Ge1995

6 жыл бұрын

Not everything can be knocked down with a sledgehammer

usefull when you are working near to a hospital.

I used this tool with oil compressor which is noisier than any drill.

@grzegorzgrzegorek8985

5 жыл бұрын

When you work in the mine, there will be dust and it is not as efficient as shown in commercial in case of harder materials like rocks. Anyway, with few other other tools it can make the job done.

@gvrcreations1986

3 жыл бұрын

Call 9505923919

what if its full of rebar

@DardaGmbH

9 жыл бұрын

kevin bennett ...no problem for our splitters!

@doctordieyoung3443

9 жыл бұрын

usman mohammad give me a block of rebar reinforced concrete this device and either a good oxygen cutter or hydraulic shears and i will show you exactly how easy this could take apart reinforced concrete. short of explosives there is currently little else that can be done to reinforced concrete to dismantle it in one go. most cases will have to work with each component separately first taking apart the concrete and then the rebar. this can deal with concrete without the worries about dust and noise and you don't have to be physically next to the device while it operates. it also looks cheap and safe enough to outclass most other methods. in an urban situation this would have clear benefits- use of explosives to dismantle buildings is loud, requires extreme precision and can go terribly wrong.

@user-eg6py9or5f

8 жыл бұрын

ءته6ة

@A1986Ge1995

7 жыл бұрын

Doctor you still need to drill the holes to insert the splitter and the best way to drill holes is with a jackhammer. You will have to deal with all the issues that you listed: noise, dust, fumes, from the compressor and the jackhammers.

@juicydangla4270

6 жыл бұрын

kevin bennett I think you'd have to make a few runs with the quick cut before this attachment would be affective.

how can i parchase this in india

@DardaGmbH

9 жыл бұрын

We have a distributor in India. Just contact our sales office in Germany and you will get the direct contact.

@vidushibhardwaj2342

4 жыл бұрын

Can anyone provide this at rent...if anyone knows about my question ...plz reply..

Why bothering? We have TNT!

Before you can use the Splitter you first have to drill a hole with a drilling machine...

@sambatchheng8793

6 жыл бұрын

Dard.aGmbH .

Ok

We have good experience in underground/mine works. Please contact us by e-mail if you need further information, Roger.

@shaikali2930

3 жыл бұрын

Hello sar my India Hyderabad se bol raha hun sar Jo machine hai vah compresser machine Hyderabad mein kahan per purchase kar liya Koi shauk hai sar sa Koi company hai udhar

मुझे चाहिए ये

I think germany technology

Very silent demonstration indeed...

Please see our website (darda.de) and contact us by e-mail!

omg. I got even amaze when I see how we progress in stone cutting. check this article to see how we did in the past and you will be amaze too: www.all-granite-colors.com/granite-articles/the-egyptians-also-used-beautiful-granite-colors

Das cool....

what if its sandstone it wont split it will just make a hole lol have to use somthing else lol.. the frame is aluminum so you can lift it how funny..

@DardaGmbH

9 жыл бұрын

james marshall No, you don't have to use something else, James. Please see the job report on our website in answer to your question:www.darda.de/fileadmin/user_upload/PDF/Einsatzberichte/Spaltger%C3%A4t/Blockgewinnung_in_der_Natursteinindustrie/Englisch/Application_reports_Block_quarrying_in_the_natural_stone_industry_Sandstone.pdf

me gustaaaaaaaaaaaaaaaaaaa

Ok