I don’t recommend to buy updated D10. It is my favourite flashlight. But the new version has annoying noise
@craigs71812 жыл бұрын
That's a terrific beam pattern for a headlamp! It's bright, wide enough coverage, and has no glaring hot spot that blinds you when you look at something close to you. I have the D25S and the SP40, I prefer the D25S because of the larger central hot spot. I don't need a "thrower" headlamp, nor do I want one. I want to see what's right in front of me and what's nearby without the blinding central hot spot. I only use them for projects around the house, or maybe when I work on the mower or car. And the D25S only weighs a bit over 4oz with the battery and headband and it doesn't even get warm on the highest setting should you need to use it. I never need that much light for what I use it for. It's hard to beat the value that the D10 and D25S have to offer. And you made the D10 an outstanding headlamp with the XHP50. I'm just not sure how water resistant they are and I'll probably never find out, so it really doesn't matter to me.
@weerapatkiatdumrong
2 жыл бұрын
I have d25s and L. The are really good sir. Thanks for sharing sir. ^^
@n8210c Жыл бұрын
Thanks for sharing, complete explanation 👍
@weerapatkiatdumrong
Жыл бұрын
Thanks for watching sir 😊. Please subscribe 🙏. Happy new year sir 🥳🎉.
@makaryotv2 жыл бұрын
Perfect floody 🤤
@weerapatkiatdumrong
2 жыл бұрын
Thanks for watching sir 😊.
@NorthBorneoLights2 жыл бұрын
My friend weerapat, u should do tutorial how to make emitter swap 👍🏻
@weerapatkiatdumrong
2 жыл бұрын
I will try. Thanks for watching sir.
@verynice11926 ай бұрын
do you know what is the max current of the 3 volt XHP50.2 led sir?
@weerapatkiatdumrong
6 ай бұрын
Hello sir. More than 5a. You can read this sir. Thanks for watching and your support sir 😊. Please subscribe 🙏. budgetlightforum.com/t/xhp50-2-j4-4000k-output-test-by-texas-ace-really-impressive-improvement-from-the-last-gen/48669
@verynice1192
6 ай бұрын
@@weerapatkiatdumrong thanks sir!
@gonzalez78052 жыл бұрын
Ooo will a sft40 work?
@weerapatkiatdumrong
2 жыл бұрын
That is what I should try sir. The cheap d10 works well with nichia 4000k, xhp50.2. and Samsung. I haven't tried sst40, sft40. Sst20 doesn't as bright as Nichia 4000k despite in the same host. Thanks for watching sir.
@ernaade9787 Жыл бұрын
Are you change driver or not?
@weerapatkiatdumrong
Жыл бұрын
No sir. Spring bypass, bigger wires and more powerful led. I can't modify it sir but some Thai flashlight users can modify it. Thanks for watching sir 😊. Please subscribe 🙏.
@humambuana48232 жыл бұрын
Just replace the emitter sir?
@weerapatkiatdumrong
2 жыл бұрын
Yes. Just put xhp50.2 + a new gasket in it. Thanks for watching sir.
@deguns6758
2 жыл бұрын
@@weerapatkiatdumrong what size gasked and led pcb sir
@weerapatkiatdumrong
2 жыл бұрын
@@deguns6758 gasket size is 5050 7mm and 20 mm led pcb. But actually 16mm led pcb is also applicable. Thanks for watching sir.
@deguns6758
2 жыл бұрын
@@weerapatkiatdumrong you are welcome
@dwisucilarasanti7562 Жыл бұрын
Lvl 5 led hot?
@weerapatkiatdumrong
Жыл бұрын
Yes. But not a problem sir. It steps down to about level 4. Thanks for watching sir 😊. Please subscribe 🙏.
Пікірлер: 27
I don’t recommend to buy updated D10. It is my favourite flashlight. But the new version has annoying noise
That's a terrific beam pattern for a headlamp! It's bright, wide enough coverage, and has no glaring hot spot that blinds you when you look at something close to you. I have the D25S and the SP40, I prefer the D25S because of the larger central hot spot. I don't need a "thrower" headlamp, nor do I want one. I want to see what's right in front of me and what's nearby without the blinding central hot spot. I only use them for projects around the house, or maybe when I work on the mower or car. And the D25S only weighs a bit over 4oz with the battery and headband and it doesn't even get warm on the highest setting should you need to use it. I never need that much light for what I use it for. It's hard to beat the value that the D10 and D25S have to offer. And you made the D10 an outstanding headlamp with the XHP50. I'm just not sure how water resistant they are and I'll probably never find out, so it really doesn't matter to me.
@weerapatkiatdumrong
2 жыл бұрын
I have d25s and L. The are really good sir. Thanks for sharing sir. ^^
Thanks for sharing, complete explanation 👍
@weerapatkiatdumrong
Жыл бұрын
Thanks for watching sir 😊. Please subscribe 🙏. Happy new year sir 🥳🎉.
Perfect floody 🤤
@weerapatkiatdumrong
2 жыл бұрын
Thanks for watching sir 😊.
My friend weerapat, u should do tutorial how to make emitter swap 👍🏻
@weerapatkiatdumrong
2 жыл бұрын
I will try. Thanks for watching sir.
do you know what is the max current of the 3 volt XHP50.2 led sir?
@weerapatkiatdumrong
6 ай бұрын
Hello sir. More than 5a. You can read this sir. Thanks for watching and your support sir 😊. Please subscribe 🙏. budgetlightforum.com/t/xhp50-2-j4-4000k-output-test-by-texas-ace-really-impressive-improvement-from-the-last-gen/48669
@verynice1192
6 ай бұрын
@@weerapatkiatdumrong thanks sir!
Ooo will a sft40 work?
@weerapatkiatdumrong
2 жыл бұрын
That is what I should try sir. The cheap d10 works well with nichia 4000k, xhp50.2. and Samsung. I haven't tried sst40, sft40. Sst20 doesn't as bright as Nichia 4000k despite in the same host. Thanks for watching sir.
Are you change driver or not?
@weerapatkiatdumrong
Жыл бұрын
No sir. Spring bypass, bigger wires and more powerful led. I can't modify it sir but some Thai flashlight users can modify it. Thanks for watching sir 😊. Please subscribe 🙏.
Just replace the emitter sir?
@weerapatkiatdumrong
2 жыл бұрын
Yes. Just put xhp50.2 + a new gasket in it. Thanks for watching sir.
@deguns6758
2 жыл бұрын
@@weerapatkiatdumrong what size gasked and led pcb sir
@weerapatkiatdumrong
2 жыл бұрын
@@deguns6758 gasket size is 5050 7mm and 20 mm led pcb. But actually 16mm led pcb is also applicable. Thanks for watching sir.
@deguns6758
2 жыл бұрын
@@weerapatkiatdumrong you are welcome
Lvl 5 led hot?
@weerapatkiatdumrong
Жыл бұрын
Yes. But not a problem sir. It steps down to about level 4. Thanks for watching sir 😊. Please subscribe 🙏.
3v?
@weerapatkiatdumrong
2 жыл бұрын
Yes. 3v xhp50.2 sir.
@vadimantonov7307
Жыл бұрын
@@weerapatkiatdumrong 6500k?
@weerapatkiatdumrong
Жыл бұрын
@@vadimantonov7307 yes sir.