I got the yellow one. It's so good. I absolutely love he bodt roll. Of course, i had to mod mine immediately. The first was converting the battery connector to JST and running it on 2S. It handles the extra voltage like a champ and the servo really wakes up. A 450 mah can just squeeze in. The second mod was replacing the rear wheels to one-way from Tamiya mini4wd. This improved handling so much and this thing turns on a dime. FYI, the original wheel diameter is 3.3cm, the same size as the Cariama Rally ones.

@thunderboltfireplane

Жыл бұрын

Hey can I ask how do you change the wheels? I've been struggling to take off the hubcaps recently and I can't unscrew the wheels

@Diamondbac

Жыл бұрын

@@thunderboltfireplane For the rear, you just pull really hard. It's a solid axle so you can worry less of something breaking. Be more careful with the front though because the steering mechanism is all pastic and just pulling it might break something. When you pull the wheel, you have to 'counter pull' the steering mechanism, if you know what I mean. Or, you can remove the hub carrier by disconnecting the ball joints and then remove the wheel afterwards.

@thunderboltfireplane

Жыл бұрын

@@Diamondbac Alright, thanks so much!

@OatKrunch88

Ай бұрын

Is it possible to lower it by any chance?

I can already see the people putting unnecessarily powerful brushless systems in this when it gets released

I like you Edward... you are a funny guy ...Hello from the U.S.

this is the video what i serch at youtube until one month 💚💚

so cute this mini

I love these neat little cars. Something different and fun for scale garages. I have the little kie truck also. Fun to race and modify.

....the green I have since a few weeks - so funny😂

Brilliant!!!

Awesome,,,,very cool 👌

I collect 1:18 scale models but I love these 1:16 Chinese RC. I got the WPL d12 mini and just got the fully opening 1:16 highly detailed RC jimmy. I like this one too. If I get it I will modify it to open the doors.

Got mine a couple days ago, love it

@EdwardChew

2 жыл бұрын

Thank you bro

Fun. Just ordered one cause I like fun.

Waa awesome 👏

I will this for my daughter, the pink one it is

...and by the way impressive techniks. It runs so smooth, has a great steering and suspension....really good!

"NICE"

great look at the differences of the d22 and d32 , been getting alot of questions about what the differences are

@EdwardChew

2 жыл бұрын

yea this is how a video should be done. Informative. Not just "Oh it's slow on a skatepark. So it's bad. Dont' buy"

Alright been waiting for this review! All I want to do is take it apart and see what I can do to it. The pink one will match my D12.

@KlunkersKustoms

2 жыл бұрын

i love modifying stuff

@Papa_Shorty

2 жыл бұрын

The only one of my WPL RCs that I haven modified is my very first one. It still runs perfectly. Even the original V3 esc is still going. I used liquid electric tape to waterproof it.

I saw a very familiar Facebook post while watching this video

@yourmomsfbuddy1177

2 жыл бұрын

It was my post. Lol. Love my D32 and D12 minis!

@EdwardChew

2 жыл бұрын

so it's you! haha

how long does the battery last?

👍👍

Great details on this. Loving the raised letter stickers. I guess I'll raise my hand first and ask what the Wheelbase measurement is in MM. People are going to want to put this on other chassis in order to make it crawl ;), much to the dismay of the original intent. Thanks, Edward.

@EdwardChew

2 жыл бұрын

Hi Mark. We did include the wheelbase information in the product page :D www.asiarcdepot.com/products/cxd-d22-mini

@EdwardChew

2 жыл бұрын

www.asiarcdepot.com/products/cxd-d32-mini 120mm :D

@VermontScaleCustoms

2 жыл бұрын

@@EdwardChew Awww, I just checked both the Mini Z (110MM) and the SCX24 platforms (130MM). At 120MM it's right in the middle of them both. It looks like it would be an odd fit with either of them, unfortunately. Thanks for the link :D

cute :3

I'm looking forward to racing loads of these around a carpet track! Very good edit Ed 👌

@EdwardChew

2 жыл бұрын

Yeayyyyy!

I am surprised there was some assembly required but I guess that lets you feel like you are building a model car a little bit. Very interesting car. I may have to pick this up. Might see some air time.... 😁 These look like those little bots in Star Wars that drive around the Death Star.

@EdwardChew

2 жыл бұрын

yes it makes it even more fun since it's not hard to assemble www.asiarcdepot.com/products/cxd-d22-mini?ref=edwardrc

@EdwardChew

2 жыл бұрын

u can get them here :) www.asiarcdepot.com/products/cxd-d32-mini?ref=edwardrc

Very nice little cars the suspension is great what dimensions is it? 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@EdwardChew

2 жыл бұрын

details in the product page :) www.asiarcdepot.com/products/cxd-d32-mini?ref=edwardrc

Is this a kei car?

Is it supposed to drift too?

@EdwardChew

2 жыл бұрын

noooope

日本でも販売して欲しいですね👍

@EdwardChew

2 жыл бұрын

yes ships to japan 🙂 www.wpl-rc.com

Gash.... 🤣

Hello, blogger, I'm Jayen, the business manager of an online sales company. After I saw your video on youtube, I want to cooperate with you, but I don't know how to contact you?14

@EdwardChew

2 жыл бұрын

hi. email to sales[at]wpl-rc.com Cheers