CX5 2018 KF2P Replace Rear Hub Unit /Bearing . You can check the sound.subtitled.
Автокөліктер мен көлік құралдары
Parts:
KD35-26-15XC(Bearing & Hub)¥17666
D651-33-042A (Nut)¥440
Tools:
14mm Hex Socket(Break Caliper , Hub Unit )
32mm Hex Socket(Hub Nut)
Ratchet
Makita compatible 1/2 18V 520N.m Drillpro18V Impact wernch
Break Cleaner
KURE 556DX
Grease
Hammer
A piece of wood
News Paper
250mm/630mm Breaker Bar
Ty-Rap(Hang the brake caliper)
How to tighten 32mm Nut
1. Tighten with 100-150N
2. Loosen 180 °
3. Tighten with 236-274N
Пікірлер: 17
Thank you for the detailed and informative video! I feel better about doing it myself now.
I finished the job. Your video helped a lot. Thanks for making it!
hello suyuki iam indra from bali i have mazda cx 7 mybe you can help me share what oil transmission can use and suitable for this car thnks
👍
Great video! What do you use to remove the bolts at the back? I tried a long extension with my impact wrench, but there are too many things in the way. I need something that can rotate and also withstand high torque. Do you have an suggestions?
@4614
Жыл бұрын
Thanks for watching! I used the following to remove it. · 3/8 Breaker Bar. Length is 10" (25cm). · 14mm normal socket and deep socket. · 3/8 universal ball joint. I used the Breaker Bar first when loosening the bolts. Then I used a ratchet or impact wrench. I couldn't use an impact wrench in some places.
Is it essentially the same as the front bearings? I've got a 2013 xz5 and beleive 1 of them went out just gotta figure out which 1
Where can you find the torque specs for all these bolts????
@4614
2 ай бұрын
Hello. Numerical information is quoted from Mazda's maintenance manual. The same description was also found on multiple personal blogs.
Bonjour, Les outils utilisés S'il vous plaît ?
Do you know of any good way of telling which bearing is going bad? Pretty sure it's one in the rear, but definitely can't tell which side yet.
@chrism9678
10 ай бұрын
Typically with the car jacked up- you can attempt to wiggle each wheel, when the wheel has play in the hub the bearing has gone bad.
@Manuelapv
5 ай бұрын
I have a sound but only when I go in a curve, but when I go in a straight line it goes away. I think it can be my bearing.
@4614
5 ай бұрын
@Manuelapv I think this is probably an early symptom. The wheel making the noise may be warm. In my car, even though I heard that noise, there was no wheel rattling.
hi pls help me i want video from the rear wheel pls
@4614
Жыл бұрын
Hello , I took a repair video of the rear left wheel hub unit . Where was your car broken?