Just an addition to my comment below, the very fact that you have a channel devoted to CVT rebuilds speaks for it's self, very rarely did one have to rebuild a "geared" box.

Great info sir! New subscriber question. On the cvt belt the oem has ridges like the edge of a quarter. I'm rebuilding a jfo15e (12 Nissan versa) the ridges where worm off the belt. The belt is smooth on the sides now not grooved or chewed up just not grooved. (Variator pulleys look great) Question #1 Can the old belt be reused? Question #2 I did buy a new aftermarket belt and it has no ridges at all just smooth. Should I use it or the old one? Just not sure what's best. Thanks For your time.

Hello nissan doctor is it possible that that mechanical parts of 4x2 cvt can be use for 4x4? Seems like i wanted to reuse some parts inside from 4x2 then i will return all needed parts in my 4x4 cvt parts to fix it in my car. Thanks

2013 Nissan Pathfinder. Primary speed sensor broke and got stuck on the end cap. While trying to pull it out it slipped inside. Try to take the whole end cap off to retrieve the broken sensor. Can I just take the end cap off and retrieve the broken sensor. Or do I need to open from the side with the torque converter

Do you have torque specs? Or just cowboy tight?

i have a 2016 nissan sentra sv 1.8 runs fine in park and neutral but once in drive or reverse it shudders and stalls...only if i add gas itll drive normal but once i stop itll stall again could it be a valve body and mind you i scanned the car and no DTC for transmission or engine?

I just spend $2,500 on this rebuild.. I hope it was worth it my mechanic explained a lot of these parts saying some were defective… in all my car drives really good. Do I have to break in my transmission? It just seems so stiff like before it would floor it. Now it just seems like when you wear a new pair of shoes

If I need to technical support how much charge you

Awh so that’s why I’m on my fourth transmission

@Reeeeeee12345

2 жыл бұрын

What did you do wrong?

@Skylersteel

2 жыл бұрын

@@Reeeeeee12345 what did I or you mean what did Nissan not do right lol

@Reeeeeee12345

2 жыл бұрын

@@Skylersteel I thought you meant you rebuilt 4, and messed up. I'm thinking about pulling my engine and Transmission and rebuilding both. I'm kinda understanding what's up, but not sure if it will be too much. 🤔 I have never done it, but have done a few other things like replacing suspension on 2009 maxima.

@billydamnit

Жыл бұрын

@@Reeeeeee12345 did you rebuild it?

@Reeeeeee12345

Жыл бұрын

@@billydamnit No. It's still just sitting there. 😐

Just had cvt rebuilt, experiencing shuddering at low speeds and highway speeds. Reverse is sluggish, not slipping, just feels like taking off in 3rd but in reverse. When I turn off overdrive it stays in 1 gear. Mechanic says nothing is wrong

Did Nissan put the same CVT transmission in their vehicles as Suzuki? More specifically the SX4?

Be nice if we could see what and how you taking it apart....js

@wolfcryl1

Жыл бұрын

Not being smart....just say with that view have know clue on how you took valve body out

My 2019 pathfinder with 50k miles has to go through this now ugh

Would it be possible to get a complete rebuild kit for 2014 nissan rogue 4cy ?

@NissanDoctor

2 жыл бұрын

Yes, call your local dealership.

Hello! I'm a nissan tech myself, I have seen guys rebuild these units constantly! My question is what is the life expectancy of these rebuilds? I know they are warrantied for 12k of 12 months after the 84k extension. Because ive heard they fail after about a year and require complete replacement. Is this true? Thank you

@NissanDoctor

3 жыл бұрын

Hello Dano, welcome to the channel. If is properly built, the transmission shouldn’t have any more issues, but you have to do it right. As you can see in the video, we replace the complete sub-assembly (minute 6:15) that Nissan sends assembled and that’s what fails. That said, there is a possibility that the transmission fails again, we have installed complete units that have failed, so there is percentage that it will fail again but not because of the rebuild. As you should know, only those certified by Nissan can work on these units. Thank you for watching and your support.

@NissanDoctor

3 жыл бұрын

Sorry, I was referring to this video kzread.info/dash/bejne/m6V7q9ywdNedl8Y.html when I said minute 6:15. Thank you.

@danob8968

3 жыл бұрын

@@NissanDoctor yes, this I know which is crazy because I can rebuild a transfer case for a tsb on a leak but not that lol

@NissanDoctor

3 жыл бұрын

Definitely, lol. Get certified and make that money. A non certified tech can lower the transmission for you and you just rebuild it. Go luck!

@danob8968

3 жыл бұрын

@@NissanDoctor ive been waiting to go to nj lol, damn covid stopped all of that. But your videos are awesome, thanks for the time you put into them!

The only way to rebuild a CVT gearbox is to put some proper gears in it. CV gearboxes are OK for some machine tools, useless in road vehicles, except for maybe mopeds. Just another point of difference car industry marketing stunt. IMHO. I have owned several Nissan 4X4 cars (Pathfinder & Terrano) and they were great cars and they towed caravans well, I will not touch one now until they put proper gearboxes in them. The Y62 Patrol and Navara UTE may be different, but I can't afford a Y62, LOL.

Can you specify the actual year range or make and model this tranny is out of. Is this 2013-2015 16-18

I rebuilt my Nissan Sentra 2016 transmission e, the car doesn’t start because the gears aren’t starting, and on the dashboard it only shows an R, no D or N or any other gear. Please reply. Thank you.

@Reeeeeee12345

2 жыл бұрын

Did you ever figure it out bruh?

How much does a CVT cost for a 2013 Nissan Altima?

I work on these cars. 2015 Nissan Qashqai 1.2 turbo CVT. Ir shudders/jerks in all speeds with RPM going up and down. No DTCs. Just removed the valve body and all pistons are free. Changed oil. No difference. What can be the problem? Plz. Thanks

@NissanDoctor

3 жыл бұрын

Hello, I’m in the US so I don’t know about that specific model, but here we had that issue that the judder didn’t set any code until Nissan came up with a new TCM update. Check if your TCM needs a software update before proceeding and check the bulletins. Thank you for watching.

@mohammadsiddiq6157

3 жыл бұрын

@@NissanDoctor just called them and they said No.

@NissanDoctor

3 жыл бұрын

Hello, the only way I know of checking if there is an update is by taking the car to your nearest dealer and connect the factory scanner to check if there is an update. Good luck.

@mohammadsiddiq6157

3 жыл бұрын

@@NissanDoctor thanks a lot

I'm going to kill myself if I have to listen to this background music any longer.

CVT transmission rebuild kit were can I get

@NissanDoctor

3 жыл бұрын

Nissan dealership

@nilugajjar8205

3 жыл бұрын

@@NissanDoctor thanks

@Reeeeeee12345

2 жыл бұрын

@@NissanDoctor where can I find a video that walks and talks a person through it? Its hard to follow at times.

No!! Just not acceptable!. With all this Transmission oil change in 7 years I could have had 3k extra on my pocket. Now the transmission when into safe mode, and I need a replacement for 5K hell no!!. I regret not knowing about Nissan CVT. I didn't know it even existed, until I had to fix it. AM getting a old used good looking car. F this. At least I will go in vacation with the money save and will get me a ps6.

@noypi1390

Жыл бұрын

I just had my Sentra 2017 cvt replaced by the dealership for free. The cvt class action settlement (came out a few months ago) says Nissan will cover the cost of replacement. And they did.

@EddyCabrera1

Жыл бұрын

Same here, I never heard of a CVT transmission. Don't understand why they ever invented this piss of shit. Abd the mother Fkrs don't loose. They invented crap and we have to pay for it.

@billydamnit

Жыл бұрын

@@noypi1390 does the recall cover just the Sentra?

We can’t see what the hell you are doing

Why are you working at Nissan? You could be a model.