NISSAN ALTIMA CVT TRANSMISSION TEARDOWN AND REBUILD PT2
Автокөліктер мен көлік құралдары
💥 Disclaimer💥
THIS IS JUST A VIDEO SHOWING YOU THE WORK IT TAKES TO REBUILD A NISSAN ALTIMA CVT TRANSMISSION. THIS IS NOT A TUTORIAL
REMOVAL OF CVT VIDEO HERE ⬇️
• NISSAN ALTIMA CVT REMO...
Affiliated links below
CAMERA USED ⬇️
amzn.to/2W8jGYq
IF YOU NEED NISSAN CVT FLUID⬇️
amzn.to/2W97dno
KNIFE USED ⬇️
amzn.to/2yMJkaJ
#NISSAN #CVT #TRANSMISSION #REMOVAL #REBUILD #ALTIMA #ROGUE #VERSA #SENTTA #PATHFINDER
Пікірлер: 189
LIGHTLY TIGHTEN* @ 3:02
This was awesome, thank you for sharing the rebuild.
Awesome. I have a 22 altima midnight and this is the coolest video yet. I just wish there were more modern videos for the engine a transmission. However....I like this. Nicely done good sir!
Nice man. It's very interesting looking into a CVT transmission. Great video! 👍
Awesome vid!
Had my 2017 Altima just done it doesn’t slip any more but at 60 mph I feel a vibration that wasn’t there b4
@JavsGarage
4 жыл бұрын
If there's a judder/ vibration they're might be a code for a rebuild. Take it to a dealer and have them scan it
Great video. Helped me out. Have you installed a drive belt ?
Great job thanks for sharing 👍👍
Professional job.
Have to do this job to my 07 Nissan murano fwd thanks for the video
@alfrdo1234
4 жыл бұрын
Benjamin Emerson Sr. How everything went?
@jefferyepstein9210
4 жыл бұрын
Alfredo He’s still working on it
@JS-qi1ou
3 жыл бұрын
@@jefferyepstein9210 lol that was great
The last 2 minutes gave me whiplash
Wow, not only do you have to change the sub assembly but also the electronically control valve body. Then you have to flash the transmission control module in the car itself( CD include with valve body). In order for it to work correctly.
@JavsGarage
3 жыл бұрын
Yup everything gets changed and programmed
What’s the part numbers for the sub assembly and valve body?
Top notch work @Jav's Garage!!! What was that track at the end? Absolute banger!!
@JavsGarage
2 жыл бұрын
I don't remember the name but it's from KZread free music choices
Good stuff, but man that red battery on the green snap on impact drives me crazy.. I know when the green went low just pop in the red one right...
When I saw that belt I was like that HAS to be from a Nissan
@remo900rr
3 жыл бұрын
I'm guessing you didn't have enough sense to read the title of the video 🤦🏽♂️🤦🏽♂️🤦🏽♂️
@remo900rr
3 жыл бұрын
I'm guessing you didn't have enough sense to read the title of the video 🤦🏽♂️🤦🏽♂️🤦🏽♂️
@CM-sy6ud
3 жыл бұрын
No way 🥴 Or it's because you read the title moron
Excellent thanks
Where you@ do you have a shop? I need work all the time im a wholesaler. Got a 2015 versa sv, shifts nice, just whines, already changed fluid and additive but didn't help much
I had no idea you could actually purchase that whole pulley assembly. Where?
Any idea what causes these transmissions to stop pulling when they get warm?
Where can I buy the entire rebuild kit at? Tried the dealer and they said Nissan doesn’t make them
was that filter just the oil filter? Also, What year and engine type nissan altima was this? Because when I saw the oil cooler, it had 4 aluminum hoses instead of 2 like my 2007 altima does.
@JavsGarage
3 жыл бұрын
This one was a 2013+ year Altima. If there's only two hose they're probably just coolant lines. If there's 4 it's coolant and CVT fluid lines . 4 cylinder engine
my 2013 nissan altima jerks up hills and wont stop until i let off the gas and get back on it, rpms high while driving and wont shift unless i do the same..is that the belt slipping?
What's it's better, rebuild o a new one for an Altima 2009? Thank, and great job...
@JavsGarage
Жыл бұрын
New
How much did all the parts cost? Where can I get them???
can you provide a link an part numbers for the sub assembly I just called Nissan an they said they only sell the whole cvt transmission no parts
We're the clutches for the planetary gear also changed?
So the Drive Belts which slip and cause the problems was not shown being changed out.??????????????????
Great job guys 🙂 where did you get the replacement parts from, Nissan I assume?
@JavsGarage
3 жыл бұрын
Yes
@coreyblunt1147
3 жыл бұрын
@@JavsGarage ok thanks, I remember you saying you worked for Nissan so I'm sure you got a nice deal. How much are the parts normally.
@JavsGarage
3 жыл бұрын
Depending on the year and model . Roughly 1,500 -2,500
New belt set how much and where is available out market or original
is it possible to interchange nissan CVT with another brand's CVT for example mitsubishi ?
Really like how you got the sub assembly for the CVT. Any chance of getting a link, name of business, or part # ? The trans and valve body look identical to my 2012 Altima. Just could tell if it was single or dual pressure sensors... Should be a JFO11E or REOF10A? Do you install aftermarket trans coolers when you do this work? I heard heat is a big factor to failure in these CVT's. Cheers, nice vid!
@JavsGarage
4 жыл бұрын
Most vehicles already have the external coolers from factory. But as far as part# I'm not sure off the top of my head. Any Nissan dealer can provide that for you just give them the VIN and tell them it's the cvt rebuild kit
@splash5974
4 жыл бұрын
@@JavsGarage The dealership wouldn't quote me for a rebuild kit...They wanted $3100 plus taxes for another trans. I went with a salvage unit for $1100. Completed the swap on Saturday. So far it is working flawlessly! My God are these units very heavy for their size! The exhaust looked a little rusty on mine, so i removed the trans from the top. Wouldnt mind finding the sub assembly, replacing the bad pulleys in mine, and requip some of the money...
@JavsGarage
4 жыл бұрын
The rebuilds started with the 2014+ model years I think. I'll have to double-check if they go that far back. But yeah they want alot of money for them and they are really heavy for the size haha! We use a transmission jack to pull it down ,I used one in a CVT removal video I posted. It'll definitely be a challenge on the ground
@splash5974
4 жыл бұрын
@@JavsGarage I went through the top with my trans, so i hooked a strap around it, and zctually used and electric forklift to remove and install the used trans. I was lucky that my dads best friend is a general contractor and let me have access to the shop! Lol
@Reeeeeee12345
2 жыл бұрын
@@splash5974 did you have a lift like that, or did you do it on the ground?
My 2017 altima has a bad transmission has trouble getting to first gear have to press down on the throttle but once it’s in first gear it’s fine and I can go all the way up to max speeds without a issue. Do you recommend a rebuild or new transmission. ?
@JavsGarage
Жыл бұрын
I would say rebuild would probably be cheaper. They change the cvt assembly and valve body so it's basically a new transmission with the old case
What do you get the chain belt set up at?
Greetings! How long does most rebuilt CVT's last? I have a 2010 Mitsubishi Outlander that has a whining CVT (bad oil pump). The dealer does not recommend a rebuild. Help me make since of this situation please. Thanks.
@JavsGarage
3 жыл бұрын
Not all cvts can be rebuild. Sometimes replacing is the only way
I have a 2013 Altima sv with 142k miles on it. When i start the car and put it in anything but park it shuts off. I have to have my foot on the gas and brakes in-order for it to stay cranked. It shifts really bad. After driving it for about 15 minutes if i put the car in park/off and put it in drive or reverse the car doesn’t move. It doesn’t rev up with my foot all the way to the floor. It just hums repeatedly. Wondering if i should replace or rebuild the cvt???
@JavsGarage
4 жыл бұрын
At that point a replacement CVT would be recommended
Please Can you tell me how I can get this rebuild kit for my transmission I have altima 2008 V6 I got some transmission bad sound when car still cold Car makes noisy when engage gear to D and accelerate over 2000 RPM
@JavsGarage
4 жыл бұрын
This is only for the newer cars. I think it's 2014+ year cars
How much would a rebuild coast for 2015 Nissan Altima transmission
Just had a problem today on the road with my 2017 Nissan Rogue 26k milage and already transmission problem, do you think it has a factory warranty?
@JavsGarage
2 жыл бұрын
I would call the dealer. I think they extended certain vehicles warranty
What website can I use to buy that rebuild kit?
What was we supposed to had learned from a 5 minute video?🤔
@BrokenLuxury777
8 ай бұрын
The point is to just motivate us to dump out the motor and CVT and do a full swap with a 5speed automatic.
Is the valve body easy to reach under the vehicle or do you still need to take the transmission off regardless to get to them?
@JavsGarage
4 жыл бұрын
You can reach the valve body under the car. Just take the trans pan off and Remove the 10mm bolts marks with a the number 7 on them and the 14mm for the gear selector along with the green connector
@splash5974
4 жыл бұрын
Yup, couple hrs you'll have it in and out. Dont forget to torque the bolts. I believe around 60 in/lbs (NOT ft/lbs) Same with your oil pan. Good luck these CVT's seem to be hot and miss when just replacing a valve body! Works for some and thrown away money for others. If your keeping the car, might want to find out about that sub assembly. That thing is slick!
This is the exact same trans as in Jeep patriot, too.
My friend has a 16 Altima 2.5. The transmission gets hot and the car goes into limp mode. This is happening more and more. He also cannot step on it full throttle or the transmission slips at higher RPMs. If he babies it he can get places. Is his transmission shot? Dealer here in Aurora, CO is giving him the runaround.
@pedroprieto6885
3 жыл бұрын
Your buddy needs to get rid of it. He will replace trans and it’ll go out again after 50k miles
@Chronicrockstar
Жыл бұрын
How do you know the same transmissions out there that last long just gotta keep it lubricated
@DJR5280
Жыл бұрын
@pedro prieto He ended up getting it replaced by the dealer for free under a class action lawsuit
@Chronicrockstar
Жыл бұрын
@@DJR5280 again?
@DJR5280
Жыл бұрын
@@Chronicrockstar It only when out once
Where do you get parts for this rebuild?
Wondering if Nissan is offering a "bandaid fix" or the parts are an upgrade to prevent future failures. Anyone know?
@pedroprieto6885
3 жыл бұрын
Bandaid fix.
How much do you charge for this service and where are you located?
What's the name of those seals at min 8:17 I would greatly appreciate it
Cool video. Where's the sound
NEED HELP ... Have 2008 Nissan rogue SL 2 wheel drive. It's leaking transmission fluid from transmission door (nuts off the flywheel). I have replaced 2 cv axle seals, front pump or torque converter seal. Finally purchased New torque converter. After putting all back together and 3 days later it's leaking? What am I missing or what do you recommend? I've already drop transmission twice. Any suggestions would help Great videos and keep up the good work!!!
@JavsGarage
3 жыл бұрын
There's a o ring in the transmission where the input shafts goes through. It's a small rubber o rinf on the tip of the shaft that goes into the torture convertor that could be the issue. Or the seal that goes around that small shaft
@JavsGarage
3 жыл бұрын
If you look at 0:53 that's the shaft in talking about. There's a small subbed o ring at the tip. And before I took off the bell housing there's a seal around that shaft as well
@harminaguilera7439
3 жыл бұрын
@@JavsGarage you got to be kidding ME...lol. That's sub O ring cause possiblity cause the leaks 😲😲😲. Honestly, I reviewed and seems ok. No tear or any signs of worn O rings. Let just say "I replace O rings" and continue the leaks...what the next protocol? Appreciate your comments....
@JavsGarage
3 жыл бұрын
That's like worst possible outcome I've only Seen it once. But if you changed the torque convertor seal and the actual convertor on a 2wd there's no more common issues I know of unless I see it In person
@harminaguilera7439
3 жыл бұрын
@@JavsGarage I'm here with mechanic and the front pump seal seems to be loose to where it was removed by hand. That's twice that happens. What is causing the seal to be loose? I know this sounds "out of technical process" what I put RTV or sealant adhesive around the seal from happening again? Thanks Javi, appreciate your feedback.
Hi. Where do you get your rebuild kit? The dealer wants me to buy the transmission instead.
@JavsGarage
3 жыл бұрын
I'm not sure if a regular customer can purchase it. I worked at a Nissan dealer that's why I was doing the job . Try calling a different dealer maybe you'll get a different response
@mIkeyGermita
2 жыл бұрын
There are rebuild kits on RockAuto for my 2013
what part of a cvt transmission usually breaks?
@ehh2681
3 жыл бұрын
Depends on how you drive. If you floor your car a lot, then the belt is usually the failure point. If you don’t replace the fluid every 30k, you could see anything fail. There are bearings, gears, hydraulic pumps, all kinds of stuff that could fail with bad fluid.
What years are this for?
💪💪💪💪👍🙏
Lol oks like fun will do I on my y Day off thxs
How much to rebuild my cvt transmission?
How much would it cost
Where Do You Buy the New Pullies Assembly and the New Valve Body?? Thanks for the info in Advance!
@JavsGarage
Жыл бұрын
Dealership
@javiersernan9310
Жыл бұрын
@@JavsGarage Thank You so much for your Cooperation!
Can I ship mine to y’all to have you rebuild?
How much is this repair kit
Where did you get that knife? That thing is sweet!
@JavsGarage
4 жыл бұрын
It's badass ! Link in the description
@romesnow1011
4 жыл бұрын
@@JavsGarage thank you!
Son barbaros para cobrar aveces no tiene nada la transmision o por cambiar un celenoide te dicen $3000.
As a Datsun / Nissan Tech, it is a single marvel of engineering crap! A 238 pound of of turd! ASE Master Tech since 1978 - Retired
@JavsGarage
2 жыл бұрын
Agreed
How much (around bout) is the parts your replaced on this transmission
@JavsGarage
2 жыл бұрын
Around 2k depending on model and year
I have a question where do u guys order seals from I've looked everywhere for a front pump seal for my 11 versa 1.8 cvt cant find a seal for it
@coreyblunt1147
3 жыл бұрын
Did you find them yet? I order most of my parts from Transtar
Is there a part number for the pulley assembly?
@JavsGarage
3 жыл бұрын
There is but every model is different you have to call a Nissan and give them your VIN
So it can be rebuilt? How much?
@JavsGarage
5 жыл бұрын
Not %100 sure. It's always been under warranty so we don't see the numbers i'm guessing $2,500 -$3,000roughly depending on model
Can that metal belt can be replace with something better
@mIkeyGermita
2 жыл бұрын
unfortunately it cannot
Or offer a good old manual transmission!!!!
I didn't see a pulley follower shaft
Cuánto me cobras por reparar mi trasmicion Nissan Altima 2018
How much would the transmission cost
@JavsGarage
3 жыл бұрын
Depending on year and model roughly $2,00-3,500ish
so the problem was the sub assembly or the steal push belt ?
@JavsGarage
4 жыл бұрын
The belts but that's part of the sub assembly do it's replaced as one unit
@ferashamad8843
4 жыл бұрын
Symbiote215 can i just replace the belt ?
@JavsGarage
4 жыл бұрын
@@ferashamad8843 to do it properly you'll need the sub assembly and valve body . I haven't seen it where they just changed the belts/sub assembly
@splash5974
4 жыл бұрын
@@ferashamad8843 You'll most likely have so much trash in there, that your valve body will be pooched as well! The valves will stick and solenoids will be contaminated as well...
How much is to rebuild a trans like that ?
@JavsGarage
6 ай бұрын
From what I remember it's around 2400-3k depending on car
hey guys i have a question,.. my 2008 altima uses the same engine as the 2002-06, same engine and i want to know if the transmission of the 2005 will fit on to my 2008 altima???
@splash5974
4 жыл бұрын
No
I love nissans but who puts a fricken belt inside a transmission? At least put the stupid thing on the outside!!!
@DaOnlyOne
2 жыл бұрын
Huh? you know before it was a rubber belt before it was metal lmao
Amazing video was curious as to what causes these transmissions to go cause I'm experiencing some issues with mine
@JavsGarage
5 жыл бұрын
It's the sub assembly that I removed. The belts start slipping
@mruiz0285
5 жыл бұрын
Symbiote215 sometimes when I run it long enough it doesn't take off right away when I come to a complete stop
@bigdaddymak1439
4 жыл бұрын
Pump and or flow control valve fail
@splash5974
4 жыл бұрын
@@bigdaddymak1439 Also valve body issues, which lead to slippage. Heat is anothef factor.It leads to failure aswell... alot of people install aftermarket trans coolers.
@davcar872
8 ай бұрын
@@mruiz0285 Replace the stepper motor located in the valve body. It doesn't cost much.
Hey where are yall located
@JavsGarage
Жыл бұрын
Nj
What parts were used ?
@JavsGarage
4 жыл бұрын
It comes in a kit. New sub assembly filters ,gaskets and seals
@LuisRamos-ul9kc
4 жыл бұрын
@@JavsGarage How much is the cost of this kit? It is in the Nissan web store?
@JavsGarage
4 жыл бұрын
@@LuisRamos-ul9kc I'm not %100 sure on the price or availability of the kit. Nissan only lets certified techs do this job
can i see this video but slow not the fast please
@CloseMyDoorMane
4 жыл бұрын
There is a setting to slow the playback speed, hope that helps!
ConVoluTed
Where can I buy this CVT?
@JavsGarage
2 жыл бұрын
Dealership
CVT POS has ruined Nissan resale values, even the ones with manual transmission which are now excellent values.
@JavsGarage
3 жыл бұрын
Agreed 👍
What's the cost on a job like this...
@JavsGarage
4 жыл бұрын
around 3k depending on the vehicle
@maldo72
4 жыл бұрын
@@JavsGarage wow ... also how many miles are people getting on these transmissions?
@JavsGarage
4 жыл бұрын
@@maldo72 it really comes down to luck. I've seen transmissions with the original fluid well over 130k running like new and also seen some with under 5k that need replacement.
@mIkeyGermita
2 жыл бұрын
@@maldo72 has a LOT to do with your driving style if you drive like a granny, it'll have a much higher likelihood of lasing way longer if you drive like an asshole (like me unfortunately), it will fail MUCH faster that, heat, and maintenance. if you live somewhere warm, consider installing a dedicated trans cooler
Part numbers please
Que fea manera trabajar amigo como que te van corriendo.
Good morning sir..I am located in Trinidad and Tobago.. Can you send me a link on where you purchased the sub assembly.. Big help.. Do you want my email, what's app number, ??
@JavsGarage
3 жыл бұрын
Only from the dealership
@dineshdeena8389
3 жыл бұрын
@@JavsGarage how can I purchase from the dealership?
@mIkeyGermita
2 жыл бұрын
@@dineshdeena8389 you gotta figure that one out yourself try flying to the US and shipping it to yourself
This video was not informative at all , it was goin so fast I got a headache watching.overall got no informaton from the video.
Not good video because u very fast video why u fast fast