Nice and crisp cutting beautiful work I really love your work ❤❤

@Mytoya2

Ай бұрын

Thank you so much!

ive been scrollsawing for over 20 years and i enjoy watching your work, nicely done.

@Mytoya2

2 жыл бұрын

Thank you so much!🤗

Never scrolled in my life, but I am picking one up tomorrow. You are great!

@Mytoya2

5 ай бұрын

Hi there,🤗Which saw are you getting?

@davidsandford8343

5 ай бұрын

Hi, I am picking up my Ryobi in the morning (Sunday in Australia) a 16"@@Mytoya2

@Mytoya2

4 ай бұрын

@@davidsandford8343 How's the scrolling going with your new saw?

@davidsandford8343

4 ай бұрын

@@Mytoya2, I have it here, but still building my woodworking shed! Been heatwave conditions in Australia, so work is slow

You’re back! I’ve been looking for new content from you, Mytoya2. Love the way you describe things “spinny things” is my favorite.

@Mytoya2

2 жыл бұрын

Hi Janet, it's good to be back! 🤗

You are amazing. You make it look so easy. 👍🏼

@Mytoya2

2 жыл бұрын

Thank you so much! 🤗

Those are so cute. You have a very steady hand and a lot of patience.....Vicki

@Mytoya2

2 жыл бұрын

Thank you so much! Still looking forward to getting together with you guys. Don't forget to let me know when you guys are meeting up in AZ.

leaving the butterfly until last seed easier but you did make it look easy; thanks for the tips

@Mytoya2

4 ай бұрын

Thank you!

Beautiful work. You’ve inspired me to do a similar project for my wife’s 70th bday. Thanks for your very thorough video! Alan in Sarasota Fl.

@Mytoya2

9 ай бұрын

You're welcome! 🤗 I would love to see the project when it's done.

Have just discovered your channel and love it. Especially the fact you show and tell what and how without beating a subject to the ground.

@Mytoya2

Жыл бұрын

Welcome and Thank you for your kind comment! 🤗 How long have you been scrolling and what saw do you have?

Very nicely done Mytoya. Love your soft voice.

@Mytoya2

6 ай бұрын

Thank you! ❤️

absolutely brilliant,rob.

Long time wood working, short time scroller here. Like most who start out I struggle learning all the ins and out of scrolling . For me the thing I had to wrap my head around was years of having wood stationary and moving the saw , now the saw is stationary and the wood is moved. Sounds like a no brainer but years of muscle memory make the change difficult. Once this is over come the rest came easier.

@Mytoya2

Жыл бұрын

Hi there, I would love to see some of the woodwork you have been doing for a long time. You are correct. Muscle memory is hard to change. For me it's spiral blades. I am so use to flat blades. Find me on Instagram or Facebook and send me pics of you can. I am Mytoya Pritchett on Facebook and MytoyaNcalifornia on Instagram.

Love the project and watching you work. Just started scrolling and I’m learning a lot from your videos. Thanks 🙏

@Mytoya2

2 жыл бұрын

Welcome to the scroll saw community! 🤗 Feel free to contact me if you have questions.

@mrnobelnigel

2 жыл бұрын

Thank-you. 👍

Beautiful work. May God bless you!!!

@Mytoya2

8 ай бұрын

Thank you so much!

I haven't scrolled for a few years but I completed great deal of projects on my Hawk. You are a very good scroller.

@Mytoya2

5 ай бұрын

Thank you so much! 🙏🏾 What are your favorite things to scroll? I love doing fretwork.

@stephendickinson9929

5 ай бұрын

I made a lot of jigsaw puzzles for the grandkids and friends. I don't have much interest in working with wood now tho.

@Mytoya2

5 ай бұрын

@@stephendickinson9929 I understand. 🙏🏾

excellent work love those desk top names. i started scrolling about 3 months ago. you make it look easy. i hope i get better. i have a delta 40-640. very old machine. got it for $40. fixed the blade holder and Im now addicted to scrolling will follow you for tips and inspiration. hopefuly ill be able to get a dewalt. theyre expensive. keep up you beautiful work

@Mytoya2

5 ай бұрын

Hi friend, Thank you for your kind comments! what kind of things are you making? I love doing fretwork. I've been scrolling since the year 2000. I've always made things that people ask for. As of this year I will no longer do custom orders. I'm going to go back to doing intricate scrolling which makes me happy. I'd love to see some of your work. I'm also on Instagram tiktok and Facebook. I will be posting again soon. Right now I'm working on a horse trailer. I'm trying to convert it into my mobile wood shop.

I love the idea of the larger scrolled projects. My tendency is things like Christmas ornaments with way too many insertions and blades like .5 pencil lead. Just curious where those patterns came from. I'd like to do something similar for my step daughter but don't know where to start. Thanks for the relaxing video!

I loved them both. What a nice job.

Great work, you make this look so easy. I'm just starting out and I love what can be done with a scroll saw.

@Mytoya2

5 ай бұрын

Thank you for your kind comment! What's your favorite out of all the things you've scrolled? I love doing fretwork.🥰

@roberthemmingway5538

3 ай бұрын

@@Mytoya2 I use my scroll saw to create names for my jewelry boxes. I'm learning that there are other uses for this tool as well.

Beautiful work ! Really like the font too.

@Mytoya2

2 жыл бұрын

Thank you!🤗

I always love to watch your tutorials!! I need to get more practice in Scrolling. Seems like I always have something else I need to do and end up going days without doing anything on the Scroll Saw. Certainly appreciate the recommendations when it comes to what blades work best!! I'm going to try to make some puzzles out of Laminate Flooring. Seems to hold together pretty well even after being subjected to immersion for over two weeks. Anyway, I just wanted to Thank You for Your Tutorials and Suggestions for Blades. I'm assuming that Laminate Flooring and the material You're using are basically the same composite material. I couldn't remember the name of the material You're using for some reason, my mind went completely Blank... LoL

The first butterfly was smoother. With the second name your hands were really close to the blade as you said they would be. Next time you could leave the board longer at the end so you can have something to hold onto. But your work is outstanding thanks for sharing.

Congratulations on what you do !!!

@Mytoya2

6 ай бұрын

Thank you!!

hi i liked the frist one i think it is safer its was nice watching you cut it out i would love to do that am think about get a scroll saw what a nice video as well

@Mytoya2

2 жыл бұрын

Thank you! ❤️ So what saw are you looking at? Make sure your saw accepts pinless blades.

Love your names, is there some place to order the patterns? I have 2 new grandsons!

@Mytoya2

4 ай бұрын

No. I made them with the free Silhouette program I speak about on 2 of my other videos. If you find me on Instagram or Facebook I can make patterns for the 2 names and send them to you via messenger or in the Instagram direct messages. 🤗

hola amiga me encantan tus trabajos desde que te vi en pinterest te sigo Dios te bendiga

@Mytoya2

Жыл бұрын

¡Hola y bienvenido!

I just subscribed!

@Mytoya2

Жыл бұрын

Thank you and welcome!

Thank you so much for your clear explanations! I love to watch you work! My saw is still in the box and I am trying to learn from experts like you before I begin. My question is, what kind of wood should I start with? I want to do wall art, like words on signs for a 3D look.

@Mytoya2

2 жыл бұрын

Go ahead and pull that saw out of the box. I'm doing a video soon on the scrollsaw books and magazines I have. I will also explain the struggles I had when I started 20yrs ago. I recommend using 1/4 MDF or soft wood and practice the pattern in this link. kzread.info/dash/bejne/loyTxtqflrSuepc.html if you need the pattern find me on Instagram. My name is MytoyaNcalifornia there. Once you get the hang of the scrollsaw you will be hooked.

hi mytoya, plz make some more videoes, best on youtube. ty rob. UK.

@Mytoya2

2 жыл бұрын

I will post another video this week. I have a question for you though. Where are you getting your patterns from? Or what program are you using to make your patterns?

Impressive 😊, im new to wood working, could you please tell me the kind of wood you are using for the name plate projects

@Mytoya2

7 ай бұрын

Thank you and welcome to the scroll saw community! I am using pine from Home Depot. Pine is a soft wood and easy to cut.

You did this project like a breeze. Wow Very impressive. Excellent job Can you share the brand name of your scroll saw please

@Mytoya2

2 жыл бұрын

Thank you! My saw is a DeWalt 788.

is that pin or pinless blade? Also, do you work with pinned blades? I was wondering if we can do the same with pin blades

I love how those names turned out. You do beautiful work! What "finish" do you like to use or do you leave them natural? Oh, I wrote a comment on your last video but think I forgot to send it because it didn't show up on the comments. You mentioned coming to the valley to visit your sister and sometimes attending the Pinterest event. I had such fun at that event when I attended a few years ago at West World. I was working a booth but still managed to do some walking around. I hope to meet you sometime!

@Mytoya2

2 жыл бұрын

I usually leave the names natural. Find me on Instagram. My name is MytoyaNcalifornia that way we can keep in touch. I will let you know the next time I'm out that way. 🤗

@SawdustmakerLori

2 жыл бұрын

@@Mytoya2 I'm probably one of the only people left in the world who doesn't have an Instagram or Facebook account. Just don't have the time to spend on social media as I know I'd get hooked on it. :-) Do hope our paths will cross at some point though! Forgot to comment about cutting the butterfly out. Yes, it is definitely better to leave the extra wood on it. Best wishes!

I have been a wood worker of 7 years , however, scrolling is brand new for me. Where can I get NAME patterns ?

What software do you use to create your designs?

Very nice, how did you do your letters.

@Mytoya2

5 ай бұрын

Hi there, I used a free program named Silhouette to make the pattern. I have a few videos on this KZread page explaining more about it and how to use it. I then print the pattern off , attach it to my wood and cut.

Very nice. How thick should be to start

@Mytoya2

7 ай бұрын

Hi there, if you're just starting out scrolling you need to start with quarter inch. I usually suggest quarter inch MDF because it's soft. If you have an Instagram or Facebook find me there. I would love to chat with you and help in any way. I can't. On Facebook I am Mytoya Pritchett. On Instagram I am MytoyaNcalifornia

great work !! what font is that??

Me encantas tus trabajos que tipo de hoja usas

Hello, I’m having trouble with making curves while scroll sawing how long did it take you to get good with staying on the line and making curves. Thanks

@Mytoya2

Жыл бұрын

Hi there, find me on Facebook or Instagram. I want to video chat with you so I can see what you are doing with your hands when scrolling. I am mytoyaNcalifornia in Instagram and Mytoya Pritchett on Facebook.

Where do you find patterns/ website for names? Want to do some for Christmas

@Mytoya2

6 ай бұрын

Hi there, So sorry I'm just seeing your post. I make my own patterns using the silhouette program. The program is free. Look up silhouette Cameo program.

that looks great,,,,where did you get the templates

@Mytoya2

9 ай бұрын

Hi there, I made the pattern using the Silhouette program. It's free. I have 2 videos explaining how to make a circle pattern. It's really easy to use. Again, it's a free program.

What machine are you using?

Love this, but can you tell me why whenever I do a sharp corner, my blade snaps ?

@Mytoya2

8 ай бұрын

Hi there, find me on Instagram so we can talk in person. I need to know a few things before i can try to access the problem. I am MytoyaNcalifornia on instagram. Looking forward to chatting with you.

my stupid sprial blads won't stay in😭

Hi Mytoya, have you tried the Flying Dutchman Ultra reverse blades? I really like them.

@Mytoya2

2 жыл бұрын

Yes, I have. I still have a few but I love the #5 scroll reverse better. What kind of things do you like cutting?

@Intarsia82

2 жыл бұрын

I find that with 1/3 of the teeth pointing up, there is more sawdust working up to the cutting line. I feel that the scroll reverse blades do a better job of clearing the kerf.

@Mytoya2

2 жыл бұрын

@@Intarsia82 I agree!

I like it because the change of blade is quick and simple but I do not know what brand it is?

@Mytoya2

Жыл бұрын

Hi there, I'm using a DeWalt 788 scroll saw. And that is precisely why I chose the DeWalt is because of the quick blade change. Also make sure that you get a foot pedal because then you can make sure that you keep your hands on your piece at all times and your eyes instead of having to move your hand to turn it off.

@eddieporrasduran3932

Жыл бұрын

@@Mytoya2 Thank you very much for your answer. Here in Costa Rica I can't get a Dewalt jigsaw, it's a pity. I'll have to look for some other guy... Thanks again and your work is excellent!

@eddieporrasduran3932

Жыл бұрын

Here in Costa Rica only Craftman, Wen, Makita,

@Mytoya2

Жыл бұрын

@@eddieporrasduran3932 I've never used either of those machines. I'm sorry I can't help with suggestions. Make sure whatever machine you choose uses pinless blades. That way the blade can fit into small holes.

@eddieporrasduran3932

Жыл бұрын

@@Mytoya2 Thanks.

what kind of blade are you using

@Mytoya2

6 ай бұрын

I am using a #5 flying Dutchman scroll reverse. I will be posting a video on blades soon. I buy them from the wooden teddy bear.

Do you use spiral blades? Have you done a sanding video? If so how do I find it?

@Mytoya2

Жыл бұрын

Hi there, I really don't care for spiral blades. About sanding, I have not done a sanding video because I've never carved a sign before. I look forward to doing one this year though. Sorry I couldn't help.

@donnacowell7415

Жыл бұрын

Thanks for responding. I find spiral blades much easier but you certainly make your technique look easy.

How do you design your neat patterns?

@Mytoya2

2 жыл бұрын

I use the Silhouette Cameo vinyl cutting program. It's a free download. You don't have to but the machine to use the program.

@0410sunshine

2 жыл бұрын

What font you used?

@Mytoya2

2 жыл бұрын

@@0410sunshine Hi there, my computer is in the shop right now but when it is back home next week I will check to see what font this was.

@Mytoya2

2 жыл бұрын

@@0410sunshine the Font used in this video was Emmett.

hello greetings, what is the name of the saw you use?

@Mytoya2

Жыл бұрын

Hi there, I am using a DeWalt 788.

what typeface do you use. Thanks

@Mytoya2

Жыл бұрын

In this video I explain everything I am using. Let me know if this helps. 🤗 kzread.info/dash/bejne/loyTxtqflrSuepc.html

There is something strange about the wood you are using. Could you identify it please ?

@mytoyapritchett4794

Жыл бұрын

Hi there, The wood I'm using in this video is Pine from home Depot.

What scroll saw do you use ?

@Mytoya2

2 жыл бұрын

Hi there, I use a Dewalt 788 scrollsaw.

What bran of saw do you use?

@Mytoya2

5 ай бұрын

Hi there🤗, I have a DeWalt 788

@garrycarruthers8598

5 ай бұрын

@@Mytoya2 what program or stencil font do you use for words. Thanks G

@Mytoya2

5 ай бұрын

I have a few videos on this channel that shows you a little about the program I use called Silhouette. It's a free program you can download.

I've been looking for the font you're using for several months. What is the name of this font please?

@Mytoya2

2 жыл бұрын

We are on Vacation right now. I will let you know after the 5th of April.

@BobsWorld379

2 жыл бұрын

You replied with a heart but do you know the name of the font?

@BobsWorld379

2 жыл бұрын

@@Mytoya2 wonderful and thanks a million!

@Mytoya2

2 жыл бұрын

Hi there, this is the name of the font in this video. ( Benquiat BK BT ) 🤗

what thickness wood is that plz? ty rob.

@Mytoya2

2 жыл бұрын

This is 3/4 inch pine.

@roberthossack286

2 жыл бұрын

@@Mytoya2 ty my lovely lady, keep safe.

@Mytoya2

2 жыл бұрын

@@roberthossack286 hi there, I noticed you followed me on Instagram. I accepted your friend request. I also sent you a picture of some of the blades I've used and an explanation.

@roberthossack286

2 жыл бұрын

@@Mytoya2 ty very much.

Queria saber a espessura de madeira.

@ricardojimtor9243

6 ай бұрын

É um pedaço de madeira de pinho de 3/4 de polegada ou 1.905 centímetros.

Hello cutting saw number ?

@Mytoya2

4 ай бұрын

Hi there this is a #5 flying Dutchman scroll reverse.

@mobylette705

4 ай бұрын

@@Mytoya2 It is very nice for women to engage in art in this way. Thank you. Greetings from Turkey, love.

Very very cool. Good job. Nice technique. You don't rush thru it and actually back your blade in for a cleaner look. kzread.info/dash/bejne/mpOM2tVpqrfgiqw.html&feature=shares What brand of scroll saw do you use?