I enjoy watching random instructional videos when I can't sleep and figure I may as well learn new and different processes, trades, and tricks. This is hands down one of the best instructional videos I've had the pleasure to watch! It makes me want to try my hand working with glass next. Keep up the great work!

@hisglassworksinc

7 жыл бұрын

Wow! Thanks so much. I really appreciate that. Glad that you enjoyed the video. They are fun to make and I wish I had time to do more. Makes me happy that you enjoyed watching it.

Dude, I gave you a thumbs up but get that label off so we can see the finished glass.

You're telling me all I have to do is spend over $10K on machines and to make some drinking glasses just spend $20 per bottle/glass? Well damn I'm sold.

@JasonSmith-le7np

8 жыл бұрын

+Zac Fitzgerald a tile saw and a lap wheel for $10,000? maybe his cost that much in his nice shop but you can buy the smaller or used versions of those machines for fairly cheap. you can get each for a few hundred new or you could go on craigslist and get them for less than 100 each. i had already cut bottles with my tile saw before i saw this video so i knew the bottle was going to give at the end and chip the lip.

@IICubeII

8 жыл бұрын

Thanks for knowing a joke when you see one and playing along Jason.

@JasonSmith-le7np

8 жыл бұрын

no i mean i see your point. the title says "how to turn bottles into drinking glasses" which sounds like a DIY project to save money and then the guy has a professional lapidary shop. i just keep seeing comments like this and i want people to know they can actually afford doing this to bottles.

@hisglassworksinc

8 жыл бұрын

+Zac Fitzgerald et al, This video is not meant as a DIY type of situation but more for people wishing to start a business making drinking glasses and candle holder from wine bottles producing multiple hundreds of glasses at a a time. There are many techniques out there for smaller quantities and hobbyist production, this routine is just a training visual for larger scale production. Thanks for everyone's comments though.

@justhereandnow2555

6 жыл бұрын

+hisglassworksinc and how much would each drinking glass had to cost for this to be a viable business?

Thank you. I had an inkling there was a more professional method to cutting glass than the string and stress techniques I see so often. I have an idea for some art pieces (not drinking glasses!) and what you’ve shown is exciting

Great video. Started using the Covington flat lap a year ago and I should have watched this then! So informative. Thanks!

@hisglassworksinc

Жыл бұрын

Glad it was helpful!

Just one word for the video and the presentation : "AWESOME"

excellent instructions :) love the demo of diamond saw NOT cutting the hand :)

This is very helpful. Thank you for posting. x :)

I enjoyed that, thanks, I see how that might be applied to lots of different glass projects.

@hisglassworksinc

4 жыл бұрын

Glad you enjoyed it. Yes, the techniques shown translate into many other glass projects.

Happy Holidays! Cheers to a healthy prosperous 2024!

This is absolutely amazing I love it such great ideas

Those Covington’s are so incredibly well made. Great video!

Excellent instruction and video!

Good technique and thorough instructional demonstration. I wish to recycle water glass bottles but I do not know where to buy the equipment in Lebanon , Middle East. I am impressed at how versatile glass can be used and reused.

@hisglassworksinc

5 жыл бұрын

We do ship worldwide and would be happy to give you a quote for the equipment. You can also start slowly by using loose grit silicon carbide on a piece of plate glass for grinding down the rims of the cut bottles.

great video!!! well done...

nice video, i learn it , and i can take it as a hobby, will try it for candles and to plant some mini cactus on pendant style.

Don't know about the glass, but this is very charming person!

Back in the 70s when I was a kid there was a kit available for cutting glass bottles to make glasses. It was a very popular thing for awhile. Damn, I am old

TY, for showing us this professional-level video. Unfortunately, most of us mortals don't have anything close to your level of investment.

@hisglassworksinc

Жыл бұрын

This video is meant more for those who wish to start a business making drinking glasses or candle holders from wine bottles. Definitely excessive for only making a few of these. This is more for making hundreds of these a day.

excellent work

@beblessedbeblessed8895

3 жыл бұрын

12/13/2020 Probably Amazon or eBay who knows now Habor Freight, Home Depot, Lowe's or even Walmart I wouldn't rule out Hobby Lobby or Michael's.

I've paid to have some bottles made into glasses for me; I'd sure love to be able to do this myself - just not sure if I could every justify having those expensive tools for this. Excellent video, though, thank you!

@hisglassworksinc

4 жыл бұрын

You can use loose grit silicon carbide on a piece of plate glass to grind down rims for small scale use. We have a video here kzread.info/dash/bejne/rIh4t9KRd86pYMo.html

+hisglassworksinc This is an AMAZING video and exactly what I was looking for. (Something exploring the more professional set-up instead of the DIY home style.) I don't have any of this equipment nor do I think that I would be able to immediately afford it. Are there places or studios that rent out their time and equipment for others to use? If so, do you recommend this? And, if so, how would I best find these places (there are a few glassblowing studios near me) and what should I look out for? (Sorry for playing 20 Questions with you there.) Anyway, great video and thanks.

Wow I had no idea that the diamond blades won't cut our skin! I don't fear any saw but I am very cautious around it. I'm going to have to try this with a finger that I don't use that often! :-)

@rustbeltmachine

Жыл бұрын

Shawn, don’t play with the saw blades. You can’t lose those moneymakers.

This video is highly instructional. This guy is a complete wizard at making glasses, out of junk wine bottles. By the time you invested in all of this high tech equipment, all you are gonna have is a bunch of wine bottle junk glasses. Do you have wind chimes made out of the bottle tops? Hell, if you had the corks, you could epoxy them, and super glue the bottle tops to them, stick a feather in them, and sell them as butt plugs. Please tell me that you do something more with this equipment. Grind the lenses for space telescopes, glasses, something?

@hisglassworksinc

Жыл бұрын

All these tools can be used for any glass or lapidary coldworking. Nothing is limited to just grinding bottles. There are a lot of extremely successful businesses that only make drinking glasses and candles out of cut wine bottles with this equipment as well. I'm sorry that your inability to see a lucrative business is holding you back.

@aldolajak1267

Жыл бұрын

@@hisglassworksinc My guests don't give a F if I serve them a beverage in a BLAND PLAIN STRAIGHT SIDED $15.00+ hand converted wine bottle glass, or an ornate crystal emblematic $2.00 glass from Walmart or Target. My guess is that you also believe in the fallacious concept of human caused climate change, and that jo bidet^ is an effective president, (or should that be presidork).

Great video great machines

Hi Mark, this is a really cool tutorial. Thank you. I curious as to why you would not wear tight fitting gloves for protection, in case the bottle breaks.

@hisglassworksinc

4 жыл бұрын

You certainly could and some people do. I find it hard to maintain a grip on the glass wearing gloves once the glass is wet. It interrupts my "feel" for the grinding when I wear any gloves. I've never had a cut bad enough to require medical attention, but I certainly have been cut many many times by glass while working.

you are the ferrari of the cutting glass...❤

Where has this video been???? I knew there was a better method than heating/cooling the bottles to get them to crack. I’ve had very little success doing them that way so this gives me hope!

@hisglassworksinc

2 жыл бұрын

Glad it helped

splendit, performant ideal puntru toti artisti in sticla

Really want one of these for my business but i'm in London. Do you have any distribution in the UK?

I'd love to do this for hobby/craft work. I have a nice wet saw similar to the one in the video since I do a lot of my own tile work. However, what tools could I use for sanding and polishing that are less costly than that tabletop grinder/polisher? Are there pads for use with a handheld grinder or drill that would work well enough?

@hisglassworksinc

Жыл бұрын

A lot depends on the number of pieces you're looking to make and if you're looking for making drinking glasses or candle holders. We do have the smaller Maxi-Lap grinder that is less than the larger 12-inch grinder. In a 10-inch size it works quite well for bottle cutting. You an also hand work rims with loose grit silicon carbide on a piece of plate glass for a very inexpensive solution. All can be found on our website www.hisglassworks.com

Hallo. If you take UV-glue, you can glue the top of the bottle to the bottom-part, then it will look like a wineglass. I did that when I did go at the glasschool in Sweden. (Orrefors)

@hisglassworksinc After watching several different presentations on this subject, it seems that this method is more time consuming than using a glass cutter. Using the wet saw produces a very rough edge that needs a great deal of finish work with the grinders and polishers. Conversely, scoring the bottle and using hot/cold water (when done properly) takes a few minutes longer to execute the cut, but saves time when finishing the edge(s) due to a much cleaner cut. What do you think?

@hisglassworksinc

5 жыл бұрын

For small quantity numbers, yes. The hot-pop method is quite good. It's certainly more time consuming though so for large production it's not as feasible cost wise. The wet saw works much better for larger production runs.

Great to see a pro setup. I have done the same on a budget hobby setup - the inland swaptop has been ok for similar work. I just don't think it will last as long as yours! What do you do with all the glass powder that is created? can you use it for anything? i wonder if you can cast it or fuse with it?

@hisglassworksinc

4 жыл бұрын

You can cast it. It will be full of bubbles and it actually floats almost like volcanic rock. Mostly we collect in a cascade system and dispose of it on a monthly basis. Be sure to wear a respirator when cleaning up the dried ground glass as it's basically silica dust which is quite dangerous to inhale.

How much will it cost? Including shipping... Will the accesories be available in India? What is the size of the equipment? I normally cut glass as a hobby and am not doing it professionally. It looks great stuff...

This is so relaxing to watch and informative. ☺️☺️

@G9JiJi

9 жыл бұрын

Urbina Urbina take a serious job for living... don't waste 30 min to watch a relaxing information..

@collinjohnson7006

8 жыл бұрын

JiJi She can do what she wants with her time.

@collinjohnson7006

8 жыл бұрын

JiJi She can do what she wants with her time.

@jeevanjohnsonmd2897

8 жыл бұрын

Collin Johnson you are right. +JiJi is workaholic. we need to relax and screw our time.

@robertmartin5389

8 жыл бұрын

+JiJi No one likes a troll. Who are you to judge anyway?

amazing !

Thanks, Mercy, Danke, Gracias.

This is a fantastic process. Can you provide a list of all accessories used in this video? I'm looking on your website and I'm not 100% sure what each accessory is called.

@hisglassworksinc

9 жыл бұрын

Dan Wilson Dan, you can find a kit of all these materials listed here: www.hisglassworks.com/shop/kits/bottle-cutting-and-grinding-kit.html

Not something one could just 'take up 'for a hobby as a lot of expensive equipment needed. Never the less interesting.

@hisglassworksinc

Жыл бұрын

It can be started small with hand-lapping with loose grit abrasive or with smaller lap grinders, but this is for larger scale production.

Buenas tardes estimado. Disculpe tiene para la venta al Ecuador los discos y conos para pulir el vidrio? Atento a sus valiosos comentarios

what type of polish you use ?

Consulta, a qué velocidad gira el disco ? O potencia del motor.

How long do the discs last?

You could soak the bottle in dish-washing soap for x amount of mins and easily peel the label (paper) off the bottle. For more ease go over the paper with a woolly pad (after it has soaked, of course)

This is extremely useful nice and understanding explanations with many details how to make a 1$ glass from 0,25$ bottle using 25000$ diamond tools. I have a question if we need for every glass we make from a quarter dollar bottle half an hour and 25000$ tools which need another 4000$ expendable grinding plates grinding domes pads and pastes monthly how many millions of bottles we need to make in glasses to cover expenses and start making profit. I need urgent answer because I already started buying the tools.

@hisglassworksinc

8 жыл бұрын

+morgana3433 We have several hundred customers around the world now making these drinking glasses and doing quite well. Some customers already have contracts with larger firms like Crate and Barrel and many have contracts with hotels and restaurants. It's a profitable business for many folks. We, of course, only provide the tools, not the business acumen.

@F1DD3

8 жыл бұрын

+morgana3433 that is exactly what I thought the whole time...got here from a video, where a guy took some ballbearings, wood and t-squares and did cut wonderfull glasses.

@robertmartin5389

8 жыл бұрын

+hisglassworksinc I have a small but growing business making many different products and pieces of art out of recycled glass. Personally I can't wait until I can afford one of those Covington grinders.

hey good afternoon? what is the value of this bottle sanding machine and is it shipped to Brazil?

Great!!

Where can I get a cutter and a grinder like those?

Definitely a how-to for the home hobbyist.

@hisglassworksinc

6 жыл бұрын

Not really. This is more for those who wish to make a business of making glasses or candle holders for large production.

@Khepramancer

6 жыл бұрын

Sorry, I was being sarcastic.

@hisglassworksinc

6 жыл бұрын

Yes. Still. some folks have asked the same thing oddly enough.

great!

Can I use these methods for cutting a Bombay sapphire bottle? That is a square bottle and thicker than wine bottles.

@hisglassworksinc

8 жыл бұрын

Yes, but you may want to use a medium cut blade for a thicker piece of glass. Something like a Result blade: www.hisglassworks.com/shop/blades/medium-cut-blades/result-blades.html

Awesome video! At what rpm is the wet saw working, and do you think this could be replicated on a chop saw with a diamond blade?

@hisglassworksinc

Жыл бұрын

The blade RPM is around 3400RPM. Moving slower would decrease chipping on the glass further. With a larger blade, the surface foot per minute on the rim of the blade would be much faster and cause more edge chipping even with a fine grit blade so you would want to try and slow down a larger saw's RPM at the shaft to provide a cleaner cut.

@iydesign

Жыл бұрын

@@hisglassworksinc Thank you!

It's great if you have all the whiz bang machines hey?

Do you or anyone else have ideas for the top pieces (cut offs). I'm going to be making candles, glasses for many years, and it would nice to use those instead of tossing them. thanks!

@hisglassworksinc

5 жыл бұрын

We have people make wind chimes from them and use them as luminaries by sandblasting or acid etching them and putting them over candles.

Love you style of cutting it is a great work and is professional to me and men, What is the cost price of the machine?

@hisglassworksinc

7 жыл бұрын

Our wet saws are listed here: www.hisglassworks.com/shop/machinery/wet-saws.html and our flat lap grinders are listed here: www.hisglassworks.com/shop/machinery/flat-grinders/small-grinders.html

@MrRola65

3 жыл бұрын

Where can I buy this machine

Is it possible to "melt" the parts together again? (if so, with "homemade" equip, hehe) thankss!

@hisglassworksinc

7 жыл бұрын

Not easily. You can bond them together with something like HXTAL: www.hisglassworks.com/shop/adhesives/epoxies/hxtal-nyl-1.html

I have seen square and rectangular bottles cut and sanded uniformly into drinking glasses or other items. How do you suggest that the sanding and polishing be accomplished for this?

@hisglassworksinc

Жыл бұрын

For interior bevels, you would use a cone instead of a dome

Hi, just stumbled in, normally enjoying woodworking videos. Question: how about a final melting of the edge with a flame to ensure that there are no risky parts for the lips?

@hisglassworksinc

Жыл бұрын

You can do that, yes. But, you'll have to re-anneal the entire piece to remove the excess strain created so the glass won't shatter when exposed to extreme temperatures.

@hotmic4045

Жыл бұрын

One way could be to get some vermiculite and put it in a crockpot. Crank the heat all the way up. When it’s hot, flame your glass and immediately submerge it in the vermiculite. Cover and turn the power off to the crockpot. Let it cool completely before checking on it. I’ve had much success with this method, but not 100%. Or buy a kiln.

Awesome thanks for the ideas. Is that a tile saw you used to cut the bottle?

@hisglassworksinc

8 жыл бұрын

+Charlie Loventhal It is. Most wet tile saws will work well for cutting glass, but you'll want to use a glass specific blade to avoid excess chipping created by using tile diamond blades. It's important to make sure your saw provides enough water to the blade for glass as well. You can see information here: www.hisglassworks.com/learn/saw-blades/water-usage-with-glass-specific-diamond-blades/

@Cloventhal

8 жыл бұрын

Thank you, sir.

@hisglassworksinc

8 жыл бұрын

You are very welcome

A blow torch will round the edges much better and faster. Taking the labels off first, makes this much easier.

@hisglassworksinc

3 жыл бұрын

If you torch the rims, you'll also want to re-anneal the pieces as you'll introduce a tremendous amount of stress into the rim by torching it. That will increase the risk of the rim shattering on someone if there is a large temperature shift in the glass.

Any tips...for not chipping the bottle at the end....? I know you said you thought that it was the label or paper..but i have found that right at the end......it always wants to hang up then chip....ive tried going super super super slow.....till sometimes chips........im thinking its because it is cutting out of the bottle...instead of thru it.....Ive thought of stopping then flipping over and finish but then i never get it exactly straight..

@hisglassworksinc

5 жыл бұрын

Several things to try. If the blade is too rough or hasn't been dressed recently, it may pop out a chunk of the bottle at the end. If you are pushing too hard into the blade and not letting the blade dictate the speed, then the stress in the bottle is released near the end and causes a blowout. If you slow down too much at the end, you can build up heat in the bottle from the blade staying in one place too long and the strain pops the bottle there. You need to go slow and steady as you cut letting the blade dictate the speed. Don't put too much pressure on it. Don't stop near the end of the bottle but continue on through to the back of the blade and then bring the bottle back towards you after the blade has cut through. Don't stop at the end but continue on through the cut.

hey there, i was wondering what the rpm of this machine is!? thank you for answering in advance, Benni

@hisglassworksinc

4 жыл бұрын

This 12 inch Covington grinder is a variable speed that runs from 200 to 1,100 RPM. We generally run it around 900 RPM

where do you buy such a machine.??

Reusing the bottle is much cheaper, but this is very educational. This is a very expensive drinking glass if including cost of those cutting, grinding blade and machines.

@hisglassworksinc

Жыл бұрын

This process is more about larger scale production. The higher the production, the lower the cost.

Very good information

What blade are you using ? A Husqvarna Superlok Glass like you recommanted on your webside ?

@hisglassworksinc

Жыл бұрын

That is correct

Can you use the dome without the water feature in the center? I have access to one without the water in the center. Can you use full speed or does sanding wine bottles and such require a slower speed offered by the varible speed unit.

@hisglassworksinc

4 жыл бұрын

Of course. You'll just have to get water to the dome some other way (either with the external water line or a sponge with water by hand). The domes are diamond so they like to go fast. If you have a lot of grabbing or squealing from the bottle, you may need to slow it down though.

@wjhutchins1

4 жыл бұрын

@@hisglassworksinc great thanks for the info. Great video awesome detail!

I have a Crystal Master Pro 12 lap grinder. I would like to purchase your smoothing dome and cone. Will they fit my equipment . I also would like the cerium powder. What about the center plug. Will that fit my grinder and is that what I need to use the cone and dome. Thank you for any help you can give me.

@hisglassworksinc

4 жыл бұрын

The CrystalMaster Pro is a direct drive motor system so the shaft on the grinder is not large enough to have a threaded mount on it. We can't connect a cone or dome to the center portion of the CrystalMaster Pro.

back in the 70's a kit was available where you used string and a candle to cut the bottles

@hisglassworksinc

3 жыл бұрын

Still a lot of folks doing that way today

Is there another way of sanding/polishing, without that exact machine. Is there something else you could use? I would love making some glasses for myself and for gifts, but I have a limited budget (and limited space)... Thanks a lot for advice! 😊

@TotemoGaijin

5 жыл бұрын

A vice and a hand sander. Clamp the bottle in and sand till smooth, then use sandpaper for the inside and outside edges. It won't be as perfectly smooth as this, but perfectly fine for a drinking glass.

@hisglassworksinc

5 жыл бұрын

Hand lapping with loose grit silicon carbide is inexpensive and easy to do: www.hisglassworks.com/loose-grit/silicon-carbide/1-pound.html

12/13/2020 ⏳Ooh my goodness 😯 it takes all that⁉️ THOSE many steps just to make "ONE" drinking 🥂 glass from 🍾 a single bottle❗ Talking about patience, No thanks I'll continue making my simple holes for my ceramic planter pots💖 enjoyed the video though ☺️

@hisglassworksinc

3 жыл бұрын

These processes are really meant for people making hundreds of these a day for large scale business. Not for a single bottle creation

Best part is drinking the wine just to get an empty bottle!

Hello, can you tell me what type of disc you use for cutting, I bought one but it doesn't leave the cut clean, thank you

@hisglassworksinc

2 ай бұрын

We recommend the Superlok Glass+ blade for bottle cutting: www.hisglassworks.com/grinding-tools/blades/fine-cut-blades/husqvarna-superlok-glass.html

Thanks for the video , I just want to know where can I buy the cutting glass machine.

@hisglassworksinc

3 жыл бұрын

All equipment is available on our website at www.hisglassworks.com

Buena tarde, me gustaría información, de como adquirir la maquina, estoy muy interesada, como se podría adquirir, y los valores puesta en chile, gracias

Hello, thank for your vidéo, tell me where i CAN buy this dôme stone for the interior of the bottle ?

@hisglassworksinc

5 жыл бұрын

Domes are available on our website here: www.hisglassworks.com/shop/cones-and-domes.html

@FranciscoJuanillo

4 жыл бұрын

hisglassworksinc hi, thank you for the video. Follow up question, what grit was the resin dome and cone that you used in the video? Do you recommend using only one grit or various to smooth it out?

السلام عليكم ورحمه الله وبركاته ماكينه ادسيك هي ماكينه فوق الممتازه بالنسبه لتقطيع الاذاذ السؤال ياريت البرنامج يكون مترجم باللغه العربيه علما بانهم تعرضوا هذه الماكينه في اي مكان تبع وتمنها بكام شكرا

I would like to do this in a large medium commercial scale. What would be the output per day using this method?

@hisglassworksinc

6 ай бұрын

We have some customers working a thousand bottles a day in production

You can fire polish the rims, but you need to be careful as wine bottles already have a fair amount of strain in them. Heating just the rim creates even more strain the glass and if someone where to use it with cold liquid it could shatter the glass while they are using it. Not a good thing. If you fire polish the rims, make sure to properly anneal the piece to avoid this type of situation.

@MrSteamdog

8 жыл бұрын

+hisglassworksinc Very good video.

@robertmartin5389

8 жыл бұрын

+hisglassworksinc I agree, the time involved in properly annealing the glass would make fire polishing impractical for most scenarios.

@davealmeida2670

3 жыл бұрын

Would be helpful to share source of supply for all tools used

@hisglassworksinc

3 жыл бұрын

@@davealmeida2670 Everything is available from our website at www.hisglassworks.com

Thanks For the information its great, I what to have more infornation about prices of your machins y diferent disks. Thanks.

@hisglassworksinc

2 жыл бұрын

You can find all our products on our website here: www.hisglassworks.com

nice thank you

hisglassworksinc Hi, very good informational video. But I have an important question to ask. What is the success rate of cutting wine/champaign bottles with a grinder or glass diamond blade like you use? I want to buy one only for cutting bottles but want to know first what the success rate is. Thanks!

@Hisglassworks1

9 жыл бұрын

Tattoostijl Once you get the technique down and pay attention to when the blade needs dressing, you can virtually have 100% success rate with cutting bottles. A lot depends on learning how glass specific blades operate and making sure they stay dressed as you use them

@esquaredglass4245

9 жыл бұрын

His Glassworks, Inc. To add on to the above question. How much does the brand of saw matter? I have tried a couple different 10" saws that I have seen people use in their youtube videos and I cannot seem to get it to cut without cracking or chipping the bottle, even going extremely slow with the same glassblades. Any tips for that?

@hisglassworksinc

9 жыл бұрын

E Squared Glass You may need to look at water usage on the blades. With glass specific blades, they are a finer grit diamond so they will require more water at the contact point of the blade and the glass to avoid excess heat buildup. You can see a video on this here: www.hisglassworks.com/learn/saw-blades/water-usage-with-glass-specific-diamond-blades/

@robertmartin5389

8 жыл бұрын

+Tattoostijl The success rate is dependant on your skill as well as the tools and method. I have tried many different techniques for cutting bottles and using a tile saw is by far and away the most consistent with the least waste. I use a cheap 7" tile saw, but I invested in their best blade and I am happy with the result. However, I am still looking forward to the day I can afford a nicer saw like the one shown. I went from breaking more than I was making to 99%. If I break something these days, usually it is usually my fault.

Is there a chance to get a dome for grinding and polishing? (Europe)

@hisglassworksinc

Жыл бұрын

Our domes are are listed here: www.hisglassworks.com/grinding-tools/cones-and-domes/domes.html

Very nice. You MUST do more then bottles to justify the price of your equipment though correct?

@hisglassworksinc

8 жыл бұрын

+Charlie Blum We actually sell the equipment but we do have numerous customers with all these pieces that do nothing but bottle cutting. They have been quite successful.

@7:00 Can you drill a hole in a plywood large enough to take the bottle plus some slack , then mount the wood over the rotating grind disk. Mount it such that the bottle sits on the grinding plate and can rotate inside the wooden hole with out any pressure from a hand , gently allowing the bottle to grind the cut edge.

@hisglassworksinc

Ай бұрын

This is typically done with larger, heavier pieces to grind them, so the process would be similar. Not sure why you would bother with something so small and light though

Nice way for a day off from work, but can buy decent glass for cost of energy spend

Can you tell me the exact blade you are using? What make and model is your saw?

@hisglassworksinc

5 жыл бұрын

We use the Superlok Glass + blade: www.hisglassworks.com/grinding-tools/blades/fine-cut-blades/husqvarna-superlok-glass.html This was cut on the MK-101 saw: www.hisglassworks.com/machinery/wet-saws/small-wet-saws/mk-101-24-wet-saw-html.html

where does a person aquire such a machine ?? good video.

@hisglassworksinc

7 жыл бұрын

These are available on our website here: www.hisglassworks.com/shop/machinery/flat-grinders/small-grinders.html

will a 7” wet tile saw work for cutting wine bottles?

@hisglassworksinc

8 жыл бұрын

+Treyads It can, but you won't be able to cut all the way through the bottle and would instead have to rotate the bottle through the blade.

@robertmartin5389

8 жыл бұрын

+Treyads Yes, but to compensate for the lower quality saw you should use the best quality blade you can find. The guys that make this video have one that is great. (I don't get any benefit from saying so) I bought a few different blades before giving in and stepping up to better quality. The main issue is lesser quality blades will leave more chips in the rim. Better blade means less chips, which means less grinding. I can't wait until I can afford a better saw. I like the one he is using, but I also have my eye on a ring saw. Another thing about saws is the clearance, which will dictate how large a bottle you can cut.

@cut--

5 жыл бұрын

I use a 10", you get one from Chicago Tool. harbor freight.

Hey! I´m an engineering student in Mexico, I want to start a bottle cutting project but I have had problems finding a machine like this, could you give me a recommendation? Thank you very much for the video.

@hisglassworksinc

5 жыл бұрын

We do ship to Mexico and would be happy to quote anything out to you.

Hi guys I’m a glass blowing artist I studied at Urban glass in NYC and I’m use to working with the machines in you video. Do you have the glass cutter and the sander available and do you ship to Norway, if I would love a price quote?

@hisglassworksinc

2 жыл бұрын

We haven't had a 220V wet saw available for over two years now as MK is having trouble sourcing the correct motors. The flat lap grinders are available with a 16-week lead time. You can email us through our website www.hisglassworks.com and I"d be happy to quote anything out for you.

Hello, could you tell me the brand of equipment and any standard or specification of it and where I can buy it on the internet. Thanks for your support

@hisglassworksinc

8 жыл бұрын

+jorge lopez You can purchase all this equipment from our website at www.hisglassworks.com We even have a kit that lists all the pieces here: www.hisglassworks.com/shop/kits/bottle-cutting-and-grinding-kit.html

@russelledwards1644

4 жыл бұрын

hisglassworksinc +

Well after seeing all the work involved and the costly machinery I think its much much cheaper to buy a dozen wine glasses:-))))))))))))))))

buenas noches, necesito informacion, de como adquerir el pructo, estoy muy interesa, como se podria adquirir, y los valores puesta en chile

@sureshpatil126

2 жыл бұрын

मुझे. ग्लास. कटिंग. मशीन. पाहिजे. त्याची. किंमत. किती. व. कुठे. मिळेल. याची. माहिती पाहिजे

I'm cutting my bottles lengthwise and would like to know what to use to grind the surface after the cut. I am aiming for a bit of production on this but am not ready to purchase a grinding wheel. Do you have any other suggestions? Thank you

@hisglassworksinc

7 жыл бұрын

The least expensive way to start out grinding pieces flat from a saw cut is to use loose grit silicon carbide on a piece of plate glass and hand lap the pieces. Quick, efficient, and inexpensive: www.hisglassworks.com/shop/loose-grit/silicon-carbide.html

@maryjenningsart

7 жыл бұрын

Very helpful. I watched that video as well. I have two more questions remaining. What should be my starting grit, mid grit and last grit for a bottle to be fairly soft to the touch (not to drink from). Also, How much should I get? Would you also recommend I get the diamond sanding pads also? thank you

@hisglassworksinc

7 жыл бұрын

I would start with a 120 grit from the saw cut, then use a 400 or 600 grit to finish off the rim. It will still be a bit hazy, but it would be a soft texture on the glass.

@hisglassworksinc

7 жыл бұрын

I would only get the handipads if you were looking to make a bevel on the rim. If they aren't being used for drinking glasses, then there is very little reason to bother with a beveled rim.

@maryjenningsart

7 жыл бұрын

Thank you very much for the help. wish me luck!

Excellent video. Please, i'd like to know where i can get that machine AND how much is it ? Thank you for sharing.

@hisglassworksinc

4 жыл бұрын

You can purchase all the machinery and tools from our website at www.hisglassworks.com. You can also email us directly for quotes on all equipment.

@imnewtothistuff

4 жыл бұрын

If you have to ask, you can't afford it.

@lilarecchia7184

4 жыл бұрын

@@hisglassworksinc thank you very much.

Do they make a disc that fits the mk saw

@hisglassworksinc

Жыл бұрын

All our 10-inch saw blades will fit the MK saw

goooooood

good video, but where is the finished product?