Nice 🔥🔥

@TheInkhousecustoms

2 жыл бұрын

Thanks 💯

This video is reason i will be making my door pods for the first time. Thank you bro we all appreciate what you do and making these vids

@TheInkhousecustoms

Ай бұрын

Glad you could find some inspiration from my videos. Appreciate the comment 👊🏾

You and sprayway are the best I think I've seen doing fiberglass work. Keep teaching and keep reaching.

@TheInkhousecustoms

3 ай бұрын

Thanks man, iv been watch him the same way for years and I got alot of info from him aswell.

You did an amazing job from one Installer to another! ✊

@TheInkhousecustoms

Жыл бұрын

@Jeremy Wilson thanks man, it came out better than I expected, didn't even have to cut any metal.

so simple, yet the execution is perfect . and you got a good ear, new sub

@TheInkhousecustoms

Жыл бұрын

@Nano C thanks man appreciate the SUB, and thanks for the comment. Stay positive ✌️

Very satisfying to watch! Great job!

@TheInkhousecustoms

Жыл бұрын

@Poppa T glad to hear that. Tried to make the video easy as possible to follow along with.

Amazing tutorial! Best one I’ve seen😃

@TheInkhousecustoms

11 ай бұрын

Thanks man appreciate the comment

YOU DO AWESOME WORK 👍🏾

@TheInkhousecustoms

10 ай бұрын

Thanks man, haven't seen a comment from you in a while. Thanks for tuning back in 🤙🏽

Very nice work and execution sir! Holler!🎉

@TheInkhousecustoms

Жыл бұрын

Thank you for your comment. Appreciate it.

Great job my brother, Thanks for showing us how to.

@TheInkhousecustoms

7 ай бұрын

I appreciate the comment and your appreciate for commenting 🤙🏽

Nicely done. I've been debating on making some myself on my 85 vette

@TheInkhousecustoms

5 ай бұрын

Hey thanks. One word of advice never doubt yourself. I wasn't alway proficient with my builds I started with small projects and worked my way up.. watching videos from other builders is the way to learn techniques.

Nice work sir ! Much appreciate it! 🤜🤛

@TheInkhousecustoms

Жыл бұрын

Thanks

Awesome work...very inspiring!!!

@TheInkhousecustoms

2 жыл бұрын

Thanks I appreciate the comment.

That's clever man enjoyed watching and learning.

@TheInkhousecustoms

10 ай бұрын

Thanks, and your welcome

Assume video and details . 🔥 🔥 one of the best I've seen. 👌

@TheInkhousecustoms

3 ай бұрын

Thank you 🙌

Great work bro

@TheInkhousecustoms

7 ай бұрын

Thanks bro 🤙🏽

Great work man. 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻

@TheInkhousecustoms

2 жыл бұрын

Thanks man, you been here from the start of the channel, thanks for the support. Your appreciated. 💯🤙🏽

Awesome awesome work bro. Good job never get tired of seeing this video.

@TheInkhousecustoms

8 ай бұрын

Thanks, I'm guessing you've watched this vid a few times already. I appreciate it bro 🤙🏽

@gerardogonzalez1455

8 ай бұрын

@@TheInkhousecustoms o yes learn a lot from your video

Cool man,excellent work.

@TheInkhousecustoms

Жыл бұрын

Thanks man, appreciate the comment!! 👍🏽

Nice work !

@TheInkhousecustoms

Жыл бұрын

Thanks mam I appreciate the positive comment 👍🏽

Yessir Drew! 🔥💪🏾

@TheInkhousecustoms

2 жыл бұрын

Yessir, give thanks mi boi.

really kool seeing process and good work

@TheInkhousecustoms

Жыл бұрын

Thanks @Theresa Long I appreciate the comment 👊🏾

love your work! Need my doors done.

@TheInkhousecustoms

2 жыл бұрын

@Terez Buchanan no problem where you stay?

@terezbuchanan7558

2 жыл бұрын

@@TheInkhousecustoms in Mississippi

@terezbuchanan7558

2 жыл бұрын

Where you located

@TheInkhousecustoms

2 жыл бұрын

Lol. I living in the US virgin islands 🇻🇮.

Excelente. Excellent Never done it. But I will try on my 98 eclipse

@TheInkhousecustoms

7 ай бұрын

Thanks man I appreciate the comment 👊🏾 hope you Subscribed aswell..lol

@Jtavera67

7 ай бұрын

@@TheInkhousecustoms yes. Let me do it

Maan that's tight!

@TheInkhousecustoms

11 ай бұрын

Thanks man appreciate the comment.

Good work 👍

@TheInkhousecustoms

6 ай бұрын

Thanks ✌️

Amazing video

@TheInkhousecustoms

7 ай бұрын

Don't forget to Subscribe 🤙🏽

#JeepGang 💪

@TheInkhousecustoms

Жыл бұрын

@Mr. 2K GANG GANG. 🤟

This was a good video

@TheInkhousecustoms

6 ай бұрын

I Appreciate you

Good job

@TheInkhousecustoms

Жыл бұрын

Thanks

Good work

@TheInkhousecustoms

Жыл бұрын

@Gerardo Gonzalez thanks

JUST FOUND YOUR CHANNEL, NEW SUB 💯 GOING THRU THE VIDEOS AND STEPPING ON THE LIKE BUTTON AS I DO

@TheInkhousecustoms

2 жыл бұрын

@Bigg Mississippi Steppa welcome to the Channel, I appreciate the sub and stay up with all new vids.. interact with some positive comments. And keep stepping on that like button 💯👍🏽🤙🏽

🔝

@TheInkhousecustoms

11 ай бұрын

🤙🏽

I've just found your channel love the video answered many questions but only one how do you know you've got enough depth for the speaker

@TheInkhousecustoms

9 ай бұрын

Thanks for subscribing. Depth was not my concern in this project, as I was only concerned with placement. Depth comes in when you have the clearance to do so. So where the 8" sat it had the original door cavities so I didn't have to cut any metal. I did have to bent some edges to clear some of the magnets, but the speakers where shallow enough for proper fitment. The door is your box, just needs to be dyno matted. And the panel is just a face for the box.

@bigdavedownunder

9 ай бұрын

@@TheInkhousecustoms aaaahhhhh

Hey brother great work and giving me different ideas in how to set up the doors. What size of wood you usually use. 1/2 or 3/4 inch.

@TheInkhousecustoms

2 жыл бұрын

Thanks, I'm glad I can't spark some inspiration. I normally use 1/2" on pods and 3/4 on sub enclosures.

@jahlieel.e7856

2 жыл бұрын

@@TheInkhousecustoms thanks.🙏

I am thinking about doing somethign similar. Do you think the bottom speaker next to the seat is necessary or maybe even adversely affects the sound because its bouncing off the seat?

@TheInkhousecustoms

Жыл бұрын

@Aviqq yes the seat will affect the sound while in the vehicle. But in the audio scene it doesn't matter, the louder the better. Hear in St. Croix virgin islands the audio guys tend to open the doors during comps so to them its more about capacity.🤷🏾

At 3:23 when he drilled the hole I blew the phone screen like mfer lol.. trip’n.

@TheInkhousecustoms

2 ай бұрын

Lmao.. bro I just watched it, what is you hearing lol.

Jus curious was that inkscape you used and was it to scale? When ur adjusting the positions?

@TheInkhousecustoms

Жыл бұрын

@Jason hernandez the program was photoshop, I just used it to get a idea for speaker placements. No need for it to be to scale.

How many layers of fiberglass do I need to put?

@TheInkhousecustoms

5 ай бұрын

I apply one one layer of chopped fiberglass to the outside and two on the inside.

What size are those bolts and nuts you’re using?

@TheInkhousecustoms

5 ай бұрын

It really doesn't matter what size, as long as they work. But I used 1" 1/4 bolts, nuts and washers.

Do you prefer plywood over MDF? What are the benefits?

@TheInkhousecustoms

6 ай бұрын

Really it's not mdf is not available where I live. I still prefer plywood tho as it stronger and more water resistant, It's harder to work with tho. Now if I was building a sub box I would prefer mdf, it has more of a dampening factor to it where you would want a softer low tone.

@TheInkhousecustoms

6 ай бұрын

Don't forget to Subscribe if you like the content.

@ArtDaBarber619

6 ай бұрын

@@TheInkhousecustoms I appreciate the insight. I am subscribed & notifications are on. Great content. Thank you for sharing 🤝🏻

How did you get your fleece and original fiber glass piece to fuse together I’m just missing that part

@TheInkhousecustoms

Жыл бұрын

@Jonathan Vardamaskos I used hot glue to bond it. It must be done on the leading edge, so it doesn't interfere with whet fiberglass resin bond.

@jonathanvardamaskos3638

Жыл бұрын

So resin bond the new resin activates the old ressin?

@jonathanvardamaskos3638

Жыл бұрын

Creating a bond?

@TheInkhousecustoms

Жыл бұрын

No the surface of the old fiberglass needs to be sanded to get a mechanical bond with the new resin/ felt materials.

@TheInkhousecustoms

Жыл бұрын

@@jonathanvardamaskos3638 yes, the glass frame was dry before all other work was done.

Great job...What type of paint gun did you use in this video?

@TheInkhousecustoms

Жыл бұрын

@TODD BUCHANAN Thanks man, the gun used is a Transtar hvlp 1.3.

@odd000357

Жыл бұрын

@@TheInkhousecustoms I appreciate you replying to my question.

@TheInkhousecustoms

Жыл бұрын

@TODD BUCHANAN Always answer questions I love the community I'm building, yall are my support when it comes to building this channel. I appreciate you 🤙🏽

Why do they put tape down? I've seen some do and some don't.

@TheInkhousecustoms

5 ай бұрын

I put down tape to protect the panel from resine sticking and making a mess. Even know the panel will be covered it would just make more of a challenge to seat the new panel being made.

Hey how’d you combine the custom panel to the original at the end? Did you glue it?

@TheInkhousecustoms

Жыл бұрын

No everything was a bolt on.

@disorientedelmo1525

Жыл бұрын

@@TheInkhousecustoms very impressive it took me 2 more watches to get a full understanding of the placement and how it held together

@TheInkhousecustoms

Жыл бұрын

Now if your using this type of setup it's only for mid range speakers, and for a small system.. if your going competition, the panel will need attach to the frame of the door.

@disorientedelmo1525

Жыл бұрын

@@TheInkhousecustoms i’m going to be running 6 12s in my trunk but i’m gonna make custom door panels. Should i attach the panels to the door for this sized setup? and if so do you have a vid that shows how it’s done?

What tape is the silver tape?

@TheInkhousecustoms

Жыл бұрын

It's aluminum tape: amzn.to/3UXv1FS

Nice pannels any would you mind sharing what the cost of materials for this proyect runs??

@TheInkhousecustoms

Жыл бұрын

@Ayala's Band prices will change from place to place, here on st.croix usvi. Fiberglass 2yd $35, felt 2yd $35, body filler $50 gl, glass resin $55 gl, wood $65, spot putty $25, primer $20 qt. $100 misc. So est. $360 just starting. If doing for jobs it's cost effective seeing you'll have materials left over for a next job, but for a single project it's costly. Glass work is labor intensive so the price for that depends on the size and difficulty of the job.

@AyalasBand

Жыл бұрын

@@TheInkhousecustoms thanks for the info im not trying to run a business just want to do it a proyect old pickup. So you think i could get 2 pannels with like 300 in material?

@TheInkhousecustoms

Жыл бұрын

If your state side for sure, you can do it for that price. You have places like hobby lobby and harbor freight.

@AyalasBand

Жыл бұрын

@@TheInkhousecustoms hey my curren door pannels are old plastic and have some holes like 2 inches wide you think fiberglass will fix that. Thank you for taling the time to answer

what kind of carpet or blanket do you use?

@TheInkhousecustoms

Жыл бұрын

That is felt cloth, it's better to use fleece for this application. But I used what I had available.

@lecustoms7351

Жыл бұрын

@@TheInkhousecustoms Ok nice, thank you

@TheInkhousecustoms

Жыл бұрын

🤙🏽

How long was the process?

@TheInkhousecustoms

Жыл бұрын

@chris565612 it takes me about a 1-2 weeks to process, mostly depends on how much hours I put in on a day to day basis.

Hey bro what size wood you using?

@TheInkhousecustoms

5 ай бұрын

On my mid range builds I go with 1/2

@dewaynejay1032

5 ай бұрын

@TheInkhousecustoms thanks brother I will try that out on my next build

What’s the names of the songs played bro.

@TheInkhousecustoms

Жыл бұрын

Lol I know that music slap, I get my music from Epidemicsounds.com not to sure the name I download so much from them.

all good bro...but the only thing I didn't like it was that fact why you have your dog chain up to a pole ..

@TheInkhousecustoms

3 ай бұрын

I have no fence where I live so, that is the only option. They occasionally get to run around for a few hours a day, so not locked down all the time. Thanks for the concern tho 🤙🏽

У колец такой вид, будто их топором вырезали😮

@TheInkhousecustoms

3 ай бұрын

Thanks

How are you sir, I'm in the process of purchasing a 2015 Subaru outback limited, I would like to know if this is your business and if so, could you do my door panels with two six by nines and two tweeters in all four doors and two 8 inch subs in the back quarter panels

@TheInkhousecustoms

9 ай бұрын

Yeah this is what I do, DM me on Instagram or Facebook @ Theinkhousecustoms or fb @theinkhouse340

@NAPPYBOY7488

9 ай бұрын

Morning sir, I live in Newark Delaware,

@NAPPYBOY7488

9 ай бұрын

I will let you know, I like the work that you're doing

@NAPPYBOY7488

9 ай бұрын

Are you located far from Delaware

@TheInkhousecustoms

9 ай бұрын

Yeah man, I live in the US Virgin Islands. Not on the main land at all.