I don't think people could even grasp the level of design, engineering, and fabrication that it would take to pull off what you have done. My family builds stream liners to run Bonneville. We do not just wing it. Everything is thought through right down to bolt placement. This is on point, man. Great job.

Somebody has some serious fabrication and engineering skills.

@isopah86

5 жыл бұрын

Thank you! i am not a metalman or engineer just a hobby :)

@rustedratchetgarage6788

5 жыл бұрын

Better than Polaris

@tylerproud7526

5 жыл бұрын

mika isopahkala think you would be able to fabricate a rear end for a buggy ? I don't have this particular set of skills bu I work hard, i would definitely pay good money it

@overbuiltautomotive1299

4 жыл бұрын

@@tylerproud7526 get one off an atv golf cart or small car ?

@tylerproud7526

4 жыл бұрын

I’ve gotten one now, think I found a decent off a predator 525 it’s abc for future use everyone, they have cv axles are setup for its and chain drive rear end

The air suspension and rear steering setup is slick. Well the whole build is awesome. Excellent work.

Man yeah that’s awesome your a heck of a fabricator!!!! Very talented!!!

👍👏 My hat goes off to you i hope all the hours/weeks/months of planning and prep work give you years of enjoyment, awesome work!

I am currently building a 3 cylinder 2 stroke powered 2wd 2 seat custom buggy using front and rear long travel suspension modules from a VW sand rail and a upsized KJ racing rear diff. im getting close to the first fire of the brand new ported mach z 800 engine and i must say im glad i didnt make it quite as involved as your buggy, props to you youve got alot invested and had do some serious figuring lol. i love it. mine should have about the same hp too.

@User-bb3ke

10 күн бұрын

Is that a snowmobile engine?

@vornice7604

10 күн бұрын

@@User-bb3ke yes, a 2000 skidoo mach z

Wow awsome! Impressive engineering. I would enjoy watching a driving video of performance. This is a great video of all fabrication .

Awesome! I'am sure that you can build these for a living 👍 Beautiful thought thru seriously piece of engieneering right there! And a Good way to get use for a old Volvo m45 gearbox 👏 Cheers from northern Sweden 🍻

@isopah86

5 жыл бұрын

Thanks! Volvo m45 gearbox is very suitable!

This this looks awesome! Subscribed!

Pland.. Perfect.. Interested.. Un compromised.. Un shakabul.. Meticulous.. Cold blooded job.. 😉👌👍👏👏

Wow great job ....cool buggy 💪💪💪

Outstanding job my friend just outstanding!! I want the same buggy with only 1 change I want a 4 seater to take my grandkids with me on long trips on the Rubicon

Awesome build!

You sir are a genius 👍😎👍

I love where we are in the world today that someone can build this in their garage with a C&C machine, welder and pipe bender.

@17industries42

5 жыл бұрын

Donovan Creamer CNC*

@Donovan.Creamer

5 жыл бұрын

17Industries sorry. Autocorrect lol

Nice work man 👍

Wow.....dude your are talented....fab skills are on the next level

@isopah86

5 жыл бұрын

Thanks a lot! I'm just a hobbyist :)

Wow your camber game is on point great job. You must have an engeinering background

@rustedratchetgarage6788

5 жыл бұрын

I know right, that travel is mad

That thing is badass!!!😎🤟🏼

@isopah86

5 жыл бұрын

Thanks a lot!!

Dude this thing is sinister lol what a build

Very nice job sir well done!

You should be proud of yourself as I’m sure you are! Because that’s one hell of a bragging right.

@isopah86

5 жыл бұрын

Thanks a lot:)

This guy is on my team during the apocalypse

Crank it up, I want to see it run👍🏻

Very cool build

Awesome! 👍

I am very interested in the files and a parts list so I can build my own. Hell I’ll even sign an agreement saying I can’t sell it. I just want to build one for myself!

Make a miniture samurai out of it😎🤘it almost pretty much looks like a samurai from the side

I was hoping to see it up and running!!

Yeah you're a straight badass dude

Every time I start to think I have some great home fabrication and engineering skills, I find something like this and can only grovel because I'm not worthy! Haha sheesh man, you are friggen brilliant! Are you sure you're not an alien?

Mantap bang...😊👍

There is a lot of people without simple minds, in this world!!!

Грамотный аппарат!

bad ass build, im very impressd. what kind of program are you using to design laser cut parts and whole buggy?

Sick music brah

Top parabéns pelo projeto, tenho um Kart Cross motor de Honda 125

Bad ass build

@isopah86

5 жыл бұрын

This is my dream:)

That thing is awesome! Ever thought selling pre fabbed weld it yourself buggys? man too awesome!!

@isopah86

5 жыл бұрын

Thanks a lot! This is just a hobby for me :) I sell this when I build a new one.

@1966cambo

3 жыл бұрын

@@isopah86 are you willing to sell the plans?

@jessejames8472

2 жыл бұрын

Did you sell this

Hi, can I use part of your video to my compilation homemade inventions and projects ?

Nice build! You would like to see my homemade 1/5 49cc RC car!!!

This is amazing machine.👍👍👍 I likes the buggys. I want to bild same machine, but I am 14 years old.😄

@Yllivan100

3 жыл бұрын

Don't let it stop you. Reach out to people who are willing to teach you. The entire world is literally at your hands

Interesting build, what do you do with the transmission on the engine? I’m assuming your running the second transmission as it gives you reverse...is that all it does and the engine transmission does the rest?

Excelente 🇩🇴🇩🇴🌎

AWESOME!

@alex311078

6 жыл бұрын

We are waiting for the continuation of the project

wow is amazing

@isopah86

5 жыл бұрын

Thanks!

FK'NG AWESOME!

Getting Ultra4 vibes from this

Mantap bang saya juga lagi bikin go kart 😁👍🙏

Really nice build!! What is the gearbox you used? Which application is-it from?

Watched a couple of this guys videos. Awesome builds, great fabrication, gay ass music.

@AdrianVega06

4 жыл бұрын

Did you came here for the music? GTFO plz

Did you have to flip the front diff upside-down to get the rotation correct, or was it a front differential?

Hola buenas noches . Quería saber que tiempo se tardó en construir gracias saludos desde Venezuela 🇻🇪.

Just an idea, for next build to just take a lada niva gear and transferbox, reverse the rotation of the driveshaft and throw it in there? Cool build tho morjensta Virosta.

Your wench Box in the back looks like Mr. Fusion. You should get a sticker that says that on it.

Can I get a set of plans?

Awsome

Teach us your ways

What is the purpose of the gearbox between the engine and the front differential?

666 views. Rock on.

Surely so many people asked after the plans and I dont see a link here. I only saw one drawing on the video of what was possibly the articulation geometry. Did you actually draw the full buggy before you started? or needed to go back at the end to draw where all the bolts etc were placed after you worked it out in build and never got around to doing the drawings? Its seems with the water/laser jet cut plates youy must have had files for those from the start so knew the dimensions of the frame? Im not so interested in the 4w steer system but I would like to be able to turn out these buggies given the current cost of SXS in my country.

where is the other buggy 900cc 4x4

about how much to build one

Que bonito prorecto

Did you just built the whole thing or did you have a plan?

Tem o projeto pra passar ou vende????????

Top top top

Can you teach me your skills ? I’m about to graduate from high school, I’d love to become a welder.

What gear ratio did the URS4 differentials have?

Have any measurements? Started to build my own but some measurement wouldn’t make it a hell of a lot easier

I wanted to put a Honda motor in one but if a gsxr is enough power then I look at different options

Would you have set of plans and instructions for this project?

@caydenhansen61

5 жыл бұрын

If they do I want them

Okay this is epic but how much did you spend on it? Be true tho

Where did you get the differential from? What is it out of

I know this video is old but what kinda transmission are you running in your side by side?

👍

Are you using 2 rear diffs and if so did you have to flip the from one upside down? Also are the axles from the same car?

@Zaphod7835

4 жыл бұрын

Thats what you want... front diff driven backward, it's backward in the frame.

What size welder did you use?

What size tube did you use

Có bán combo tất cả không nhỉ

Hi very good work .can you sells The plan ??

If you would’ve used a goldwing motor with factory reverse you could’ve saved a lot of time and money and engineering.

Do you have blue prints and materials list for the rolling chassis for sale?

Where did you bought your pieces?

Do you sell the cad files for all the brackets ? If so how much ? Would luv to build one of these brusisers…..

hey mika would you happen to have a build sheet or a pdf file of your build I would love to make one also please and thank you

What diff did you use?

So in the end was it cheaper than buying a rzr and doing some mods?

@isopah86

5 жыл бұрын

This was much cheaper for me :) I would like to buy Polaris general but it costs about 28000e in Finland.

Which material it's chassis made of

cost

This would absolutely destroy a rzr at pretty much everything for probably half the cost

good afternoon, can you send some sketches with measurements from this buggy, if you have them, please, thank you.

Like

Do you no @Tim Cameron he rock crawls

@isopah86

6 жыл бұрын

Harrison Bentley yes I know

How much kilometers speed and one time fully fuel how much kilometers running

I suppose if you had the time and nothing else to do and had a pile of parts and steel laying around this might be worth-while. But the cost to the average guy would probably border just buying a new RZR XP and that's not even taking labor into account. Cool build though...but I would personally pass on the rear steer. With a chain drive like that I would think it would be unstable at speed, and a chassis this small really doesn't need it IMO.

@isopah86

5 жыл бұрын

Maybe I have too little time because I'd like to make a new one :) This car might cost about 5x less than my preferred Polaris general. Thanks!

@mikey_mike

5 жыл бұрын

@@isopah86 hell yeah. And this is way better than a polaris. Nice work man. I'm planning on starting a fab shop soon and plan on building some buggies. Hopefully within the next year or so. Did you make any plans for this build? If so, I'd be interested in buying a copy.

@rustedratchetgarage6788

5 жыл бұрын

This beats Polaris hands down

@Holden-McGroin

5 жыл бұрын

@@isopah86 If you're saying that you can build this for ~$3k (1/5 of a General), then I would suggest you start mass producing them 'cause you'll make a fortune. I'd still like to see this thing running rough terrain at 70mph. It's a cool buggy for sure and probably better than a RZR for crawling, but that's where it ends.

Budget has left the chat.

@isopah86

5 жыл бұрын

this has cost me about € 6,000. I can do the next video with information about the price.

@carsonmiller9658

5 жыл бұрын

@@isopah86 cool that would be great thanks

Wouldn't this spin the transmission backwards and force you to use the reverse gear to move forward? Excuse my ignorance but i am thinking about using this setup but i don't want to go down this road only to find out you had some special gearbox that was built to be driven in reverse or something.

@patolino21

5 жыл бұрын

if that happens with your setup you can swap the engine to the front to reverse the rotation. the seats a little to the back and all... but is best to use it in the transversal alingment, bad oil distribuition can f**k all the engine up, so... =/

@isopah86

5 жыл бұрын

I use volvo M45 gearbox and works fine! I have used in the previous buggy of the same transmission.

@tarrynshorts3646

5 жыл бұрын

Use a Polaris atv transmission and rear axle. Way easier and already built to do the job. Also, with a Polaris atv transmission you can run any snowmobile engine of your choice to it. No shifting, except forward high & low, neutral, and reverse. Way more power and much simpler design.

@johnstephens7697

3 жыл бұрын

@@tarrynshorts3646 I Don't Know About More Power? GSXR1000 Producing 185 Horsepower!! Most Skis Are Pretty Expensive and you can find Rockets Cheap and Super Cheap If They Are Wrecked! But, It's All About Preference. Polaris Gear Boxes&Diffs Are Not Built Well Enough To Handle This Kind of power. I Should Know Because I Am A FRANCHISED DEALER! 🤔 Sincerely:Stephens Motorsports Family

Where are you buy wheels

Do you have the g-code for cutting those parts? And want to sell them? Lmk