I guess someone has to be the best builder, bravo.

Your figures skin tones are some of the BEST I have ever seen. The model is amazing but the figures help to make it look even more realistic.

After assembling all the drive train and engine, everything else must have been a piece of cake!!

@henschelporsche1

4 күн бұрын

Yes you can say that, all main works were down below.

Great job, looks amazing

@henschelporsche1

27 күн бұрын

Glad you like it! Please subscribe to my channel if you have not, thank!!

Beautiful work

@henschelporsche1

Ай бұрын

Thanks! Please subscribe and share to my channel if you have not.

Your weathering is very impressive! In my opinion you have the perfect amount.

You do a amazing job to this model a real eyecatcher .Additional details work real good .

@henschelporsche1

6 ай бұрын

Yes thanks! I really enjoyed this build and couldn’t take my eyes off it on my shelf. 🤭

you are the boss pal!!! excelent finishings!!! Bravo!!!

Beautiful build. Looks just right all around !

Truly excellent work again!

The 251 from Das Werk really has a lot of details. Additionally, the ones you made make a beautiful model. Looks wonderful. These figures turned out great. I'm just finishing the sdkfz 251 from Trumpeter. It's not as accurate, but it's ok. The tracks seem more correct than in this model, but it lacks the engine and internal details. Congratulations once again on a successful model!

@henschelporsche1

6 ай бұрын

Thanks ! I would also like to build a trumpeter version which should take less time.

Fantastic looking model...your attention to detail is superb..100%...👏👏👏👏 ❤️

@henschelporsche1

6 ай бұрын

Thank you very much!

Congratulations on another fine build! Beautifully done once again. I haven't started mine yet but I am looking forward to it. I just finished my Das Werk Stug with full interior forward of the firewall today so the 251 has moved up a notch on the "to do" list.

@henschelporsche1

6 ай бұрын

Thanks! I am looking forward to seeing the release of the 1/16 Puma next year.

@michaellemaire5380

6 ай бұрын

I'm looking forward to it as well. as soon as it becomes available for pre-order, I'm on it!@@henschelporsche1

I love the disclaimer..lol Excellent work!

@henschelporsche1

6 ай бұрын

Thanks! It has to be careful with making German ‘Elite’ troops, people are sensitive especially nowadays

Awesome work, thanks for sharing!

Absolutely beautiful. Masterpiece..!!

@henschelporsche1

6 ай бұрын

Thank you very much!

Excellent work, your the modeller I always wanted to be!

Perfect build

Outstanding build, video and presentation.

@henschelporsche1

6 ай бұрын

Glad you enjoyed it

Отличная работа! Шикарное исполнение 👍🏻

Outstanding work

Amazing 👌👌👌

@henschelporsche1

2 ай бұрын

Thanks 🙏🏼

Another fantastic build, I have this to build but it's in a queue behind a 1/16 Sherman and Tiger I

@henschelporsche1

6 ай бұрын

SOL is producing some nice figures to go with perhaps you could try that!

Cool weathering.

Very cool! So detailed!

I was at Heritagcon....it looks impressive in person....I want to purchase the kit from AHHQ's booth but it sold out quickly!

@henschelporsche1

2 ай бұрын

Thanks ! I also bought my halftrack from him online. He should have given me some commission to sell them like hot cakes 😀

Well done!

Good job!❤

Amazing!!!!!!!!

Very nice!!

Real good job ❤ I like it

Impressive build! Congrats for your skills

@henschelporsche1

6 ай бұрын

Thank you !! I still have room to improve, not as good as some masters😀

qu'un seul mot a dire superbe vraiment tres tres beau

Incredible.

Great job as always, hopefully you will build the new puma coming out soon

@henschelporsche1

6 ай бұрын

That's the plan!

Excellent build, thanks for sharing video. Questions: 1. What is your base color yellow? 2. from your experience, do you think its possible to paint over Tamiya TS-80 flat clear coat? Directly over with new color, or first with fine primer. Sorry to ask questions in your video forum, but it’s difficult to find knowledgeable people to talk to for this hobby.

@henschelporsche1

15 күн бұрын

Hi, really thank you for your compliment! And no worries with your questions, I will be happy to answer all if I could. 1. The base colour I used was Tamiya XF-88 dark yellow 2. I like if better than 60 dark yellow 1 as it is more vibrant and less dull. 2. I don’t see any problem painting on the flat clear lacquer, even with acrylic paint it is still ok. I always use both on my models without issues. Of course putting a grey primer would provide a better adhesion to the cover paint but really up to you. Military models are ok to show flaws as it happens on the real tank during the chaotic environment. I hope you can share and subscribe to my channel.

@EnginesInsider

15 күн бұрын

@@henschelporsche1 Thanks very much for your reply, really appreciate you taking the time. I painted road wheels, lower hull, and rear hull with XF-60 ... and instantly didn't like it. But thought I should keep going, so flat clear coated it. It's a 1/16 Tamiya Tiger 1 RC model converting to a Mid Production version. I got frustrated trying to find parts, along with the XF-60 color ... and haven't touched it in two years. Just rebooted the project after seeing some models painted with XF-88, and figuring out if it's ok to repaint over the flat coat. Thanks for your answer, it helps carry my project forward.

thats very very nice well done , can i ask you something about your airbrush setup? What regulator/moist trap are you using?

@henschelporsche1

6 ай бұрын

Thanks !! I used Sparmax compressor and their moisture trap. Airbrush I used Creos PS270 0.3mm for camo pattern. I also bought a iwata 0.2 but the effect was not as good as PS270. Hope that helps!!😀

Good job;)

@henschelporsche1

6 ай бұрын

Thank you! Cheers!

Nice work, i can't do it.

@henschelporsche1

6 ай бұрын

You can do it!😊

In a few days, my Takom 1/16 jeep will be completed... this kit is next. My sprues are already laid out lol!

@henschelporsche1

6 ай бұрын

I am sure you will enjoy it, wish more vehicles were to be produced!

Hi, great mock-up and nice improvements. The only remark I would make would be that even after 4 years of war, the vehicle would not be so rusty. Good job!👍👍

@henschelporsche1

6 ай бұрын

Thanks! I used my ‘license’ to make it my way of weatherings 😂I admit it is sometimes overdone but looking at my older pristinely painted works they just look like model and not a work, between both I would rather pick the dirty one, in fact they are not entirely rust but chipped and grime / dust streak marks. Thanks for you remarks and look forward to have more conversation with you in the future!

Excellent as always. Does anyone make hinges in 1/16th. Scale?

@henschelporsche1

6 ай бұрын

Yes but they are not necessarily fit the required size so I mostly made my own

Stunning build and finish. One question, what do you use for the shading effects that you spray after the wash? Thanks 👍

@henschelporsche1

6 ай бұрын

Thanks ! I just used the acrylic flat black Tamiya

@peterbibby2678

6 ай бұрын

@@henschelporsche1 thanks, assumed it was a magical mix. The effect is incredible.

Superbe travail, on voit là le vrai passionné, BRAVO ! Question : Où trouve-t-on ces mini mèches flexibles ? (vidéo 12:50) Merci

@henschelporsche1

6 ай бұрын

merci pour votre compliment et j'espère que vous vous abonnerez à ma chaîne. ces perceuses ont été achetées sur Amazon. ils sont vraiment tranchants mais cassants, vous devez donc être prêt à en acheter quelques-uns pour les remplacer. J'espère que cela pourra aider!

@MichaelTerrasson

6 ай бұрын

@@henschelporsche1 Merci du retour. Toutes les mèches trouvées ne sont pas flexibles mais standard et oui, elles cassent assez finalement, je continue mes recherches. Et pour l'abonnement, c'est fait ! 😉

Salut maquette magnifique belle patine et détails j'ai une question à vous poser avez vous un site pour les détails de veaux modèles svp merci gege 62 👍👍👍

@henschelporsche1

6 ай бұрын

Merci pour ton compliment! Merci d'avoir regardé mes videos! J'ai un site pour montrer mes œuvres et les vendre, mais il ne s'agit pas de savoir comment construire les détails. mais si vous regardez ma liste de lecture, vous pouvez trouver des didacticiels vidéo qui expliquent les astuces pour détailler ces versions personnalisées. J'espère que cela pourra aider !!

@gerardcaillou5663

6 ай бұрын

Merci pour votre réponse a bientôt 😉

こんにちは、これはどこのメーカーですか？

@henschelporsche1

6 ай бұрын

メーカーはDas Werkと呼ばれるドイツの模型メーカーでした。

@user-fw1si8uw4w

6 ай бұрын

@@henschelporsche1 さん、ありがとうございました。

Why oh why the computer voice?

@henschelporsche1

6 ай бұрын

I don’t like my voice, it is kind of scratchy, hope you don’t mind the AI voice 😏

@lenvandenberg8479

6 ай бұрын

Never liked the AI voice, however can certainly put up with it to observer your work....extremely well done. @@henschelporsche1

Nice to see the model on HeritageCon

@henschelporsche1

2 ай бұрын

Yes, nice to see it get appreciated with a gold medal 🥇😀