Brian seems like a man who’s being doing this a long time and knows what he’s doing. That’s an awesome engine, I didn’t know they existed until today.

@Libertad59

4 күн бұрын

I'm looking for one as we speak.

Boy,that thing cranks up quickly!

I've Never been able to see one of these engines in person I'm glad you made a video about this it's realty super cool also I would love to see more content like this on other diesel engines that is

The big cam III has been my favorite engine from the time I was little. I have always dreamed of finding a TT. I have never seen one and I've been laughed at and told Cummins never made one.

@alex69keiths

Жыл бұрын

That is what my father had in his ford 9000, 13 over . I learned to drive that truck when I was 16, and drove it for many years, too many . 😂

@temoswalt2371

3 ай бұрын

I loved the BC3 400 I ran, smooth power and torque from 1500rpm up. It was mated to a 15spd, a 13spd would have been perfect and kept it in its peak power rpm. Would easily keep up with Cats of the dame horsepower, pass a few as well.

Engine looks nice sounds great always enjoy watching your videos when you put one out have a good day

That cummins has been shown a lot of love.

My fire department just retired our 1973/74 Howe International Ladder truck with a Small cam 855 NTF365 that I bumped up to 400 horsepower because the truck was slow but ran great. I love the 855 Cummins

@smckinney3mckinney141

Жыл бұрын

Interesting you should mention that engine. I grew up in a family owned Heavy Construction & Rigging Business and 1 of his cranes a TM-800 [80 Ton]Grove Hyd Crane That had this same engine in the carrier, NTC-[F] 365..

@Darth-Nihilus1

Жыл бұрын

@@smckinney3mckinney141 i was reading about the NTF365, it was used for fire and mobile cranes. It was a good engine

@smckinney3mckinney141

Жыл бұрын

@@Darth-Nihilus1 Yes, this was a 1973? Model Crane still had the Compression Release on the Engine. The [ F] designation allowed the Governed Rpms to turn to 2500..

@Darth-Nihilus1

Жыл бұрын

@@smckinney3mckinney141 ours didn’t have the release on it to start, it turned over fast and fired up smoothly. They also blew up the engine in the 1990’s from rebar on a bridge kicking up and going through the oil pan

@smckinney3mckinney141

Жыл бұрын

@@Darth-Nihilus1 Ouch!! i'm sure that wa$ an expen$ive repair.$$

Ty Brian , Bruce you guys need more videos Sir 👍

I had one in a 78 peterbuilt 359 ,cummins told to call Mr Bruce, he was quite helpfull

Good to see you again Brian! I so enjoyed the timing and comments on the N14 video and I so enjoyed this even though I can't remember the name of the engine cuz I had too many letters. I guess I'm thrown out of school because mechanical engine scare me; not that I want the most recent ones with more sensors and wiring than they have steel but I'll take my 1999 N14 Celect Plus and let the electric computer figure things out.

Thanks for taking the time to make this video!

Definitely smokes like a big cam !! Got one in my Pete cabover I’d love to have that twin setup though

Thing is a beast!

I drove a 86 pete with one of these. Real good runner.

Ahh low compression old school smoke. It needs a mountain to flatten to clean up! 😎

I absolutely like this guy's sense of humor... trying to explain technical stuff over the defeaninig noise😂! Nice engine anyway! Always been loving Cummins - NT 855!🇬🇾

they used to have an air tank mounted to the engine. that was a pert of the system that held air for start up while truck air system built up gee. that has been a few years ago

Sounds great. Need more vids PPI

great job . chic engine

Thank you

Awesome motors

I have one and I tell you it’s a different feeling

Que belleza de motor

Excelent

I need one 🤣😍

A quick question, was this the NTC-475 that Cummins had out for a short time?

Love those old 855 big cams! My brother and i Had the opportunity to do an inframe on one.. Im curious as to how it will dyno within safe operation? And a question as to why you couldn't eliminate the after cooler and run it with an air to air... The intake manifold off an N14 will fit right on the big cam... The early N14 were mechanical also...

@anthonionesbitt202

2 жыл бұрын

The NTTC can make 600hp easily

@65redneck1

2 жыл бұрын

@@anthonionesbitt202 I think it can safely too.. If anyone can set one up to do that it would be Pittsburgh Power...

@blankblank3397

2 жыл бұрын

I started out in an N14 and I loved it. Those earlier ones could take a beating

Saludos Mr brian, le quiero hacer unas preguntas y espero me pueda ayudar. Hay una leva (camshaft) para el motor (ntc855 c450) #(3801030 ó 3021589) para tiempo fijo que tiene un recorrido mayor para el injector (0,266")? La pregunta! esa si la leva tiene mayor recorrido en las válvulas de escape y admisión? O solo es para el inyector. Quiero elevar un (big cam iii 400) a 450hp) con un solo turbo ht60 híbrido (80/110mm) compresor.

Great video is possible to get a engine like this in market

Smokey one. Worn rings?

I driven a freightliner FLD 120 with a Cummins N14 had a crappy turbo definitely needs this twin turbo can't find any trucks with nice twin setup or compound such a shame

@DeathDealer1825

4 ай бұрын

So why not replace the turbo? Tons of good single turbo setups for the n14

@georgerenton965

Ай бұрын

Be careful what you wish for. The hint is this was not the answer to Cummins stepping stone to electronic fuel management. Short lived availability is the clue.

Brian, is this the same version of the old 475 Hp Cummins with turbochargers run in series? I remember the problems they had with the MVT timing.

What's the torque on this setup?

Can you do aa video on a 444 Cummins

You sell these old school mechanical engines sir ?

If a steam engine and a Briggs Stratton had a baby that smoked a pack a day it would be this engine.

Hi, I want to make a major overhaul on my 855, but I don’t know what parts will be needed to convert it to a more powerful version and get 500 hp. You can help me or someone who can tell you about it

@markwilliams4525

2 жыл бұрын

I'm not a professional by any means but I believe you have to build the engine to a different cpl number and change or add parts as required to handle the new horsepower such as an after cooler if it doesn't have one. Call a true cummins shop and they should be able to tell you what you need. The one in ocala fl was able to help me out

In the day this would actually give a 425 cat a run for the money.

@justinmartin8887

2 жыл бұрын

Uh. More like run clean over it.

@nokiaicon

5 ай бұрын

@@justinmartin8887 easilily

@temoswalt2371

3 ай бұрын

Spot on, the BC3 400 single turbo I ran would keep up with Cats of the same horsepower, pass a few also. Twin turbo....that would have been fun.

Como se puede acoplar otro turbo a un motor 400 big cam

How May HP on it?

I’ve got 2 of these fuel hog 475 hp. I swapped out the crazy mvt for fixed cam followers

Can an N-14 celect plus have this twin turbo set up and feature?

@scottycollins1829

Жыл бұрын

Yes,, any DIESEL ENGINE CAN!!!!

That's a factory set up? I don't think I've ever seen something like that...twin turbos on a mechanical diesel engine. Am I correct on the mechanical part? I think I am lol. What is the reasoning behind the variable timing and what was the intended application for this particular engine? Any info would be greatly appreciated. Cool vid👍

@robertarrol4374

2 жыл бұрын

That is factory set up on old cummins,but came out on earlier big cams as far as i know.it was just part of the beginings of playing with timming to meet emissions for those times.later on cummins brought out variable timming in the injector itself called stc,stepped timming control.from there they went electronic to celect product.

@scav3155

2 жыл бұрын

@@robertarrol4374 Thanks for the info.

@smckinney3mckinney141

2 жыл бұрын

And i believe the variable timing was also possibly for California Emissions.

@alexanderanfinogenov3625

2 жыл бұрын

any other reasons except emissions? any advantage for engine work?

@benjaminturpin2749

Жыл бұрын

@@robertarrol4374 what the fuck is a timming? I've heard of TIMING. As in injection timing. No idea what timming is

Cuántos hp y torque pudo generar ese motor????

Saludos a está comunidad de gente que les gustan los Cummins. Les tengo un par de preguntas? El camshaft del 475 es (3801038 ó 3021589), lo podré instalar en Big cam iii que es ntc400?. Ya se que ese árbol de leva tiene más recorrido en el inyector y es mvt. Lo quiero usar en tiempo fijo? Elevar mi NTC 400 a un NTC 450 pero sin modificar más nada o debo hacer algo más? Al turbo bht3 le voy a cambiar la rueda compresora de 73.4 /109mm por un compresor 80/110mm . Creen que logré los 450 HP con esas sencillas modificaciones? Le agradezco algún asesoramiento adicional.

@sebastianolaya637

Жыл бұрын

Tengo un nt444xt con casi esa potencia el cpl es 1280 revisa esos parámetros según entiendo solo seria cambiar el árbol de levas y configurar la bomba lo demás es muy similar al 400

Great ,and How many Horse Power?

@scottycollins1829

Жыл бұрын

Anything between 350-1200 depending on how much 💰💰💰💰💰💰💰 U want 2 spend

Como se puede acoplar el otro turbo

Mister. Que CPL tiene es motor

Is the twin turbo a Cummins factory installation or an aftermarket install? I worked at Cummins for 26 years and never saw a twin turbo big cam Cummins.

@xxxmikeyjock

8 ай бұрын

nttc 475 factory mvt motor

@ronaldrussell5481

7 ай бұрын

Where did you work? Inner city New York and I can believe you never saw one or heard of it, otherwise, it was either after, or before your time.

@medrep1000

7 ай бұрын

I was employed by Cummins Engine Co. for 26 years in Central Calif.

@ronaldrussell5481

6 ай бұрын

I was with factory from 1970-78, then with Chicago distributor until 2001. NTC-475 was not a popular engine, probably did'nt make very many and may not have been CARB certified.@@medrep1000

@carlcarlamos9055

6 ай бұрын

This was from over 40 years ago, so you probably missed it.

Ó este motor q tipo de motor es

Why do Big cams smoke at start up.

@xxxmikeyjock

8 ай бұрын

fixed timing. so when cold the injector is firing at wrong time for smoke free

And they said the 2 stroke Detroits were dirty? Cool engine though.

Great video Cummins was late to the variable timing party Mack accomplished the same thing with a simple Bosch pump in 1966

I melted my starter switch 😢 didn't know what i was doing

Better off with a STC n14

@robertarrol4374

2 жыл бұрын

Agreed

damn the way that it works with FUEL pressure and air system is fkin cool...the only knowledge i really have is how the timing works with the 1.4T multiair from chrysler..which is controlled with oil pressure

2:28 - 2:37 bruh

AHHH come on run it longer with out coolant lol

I have one in a 359… anyone uses a 855 for otr use nowadays

Do a CAT.

This thing would be a interesting build to put air to air on it instead of that aftercooler!! It probably would make alot more HP and burn a little cleaner!!

Anyone else follow this guy @thinairdiesel he's made his on compound turbo setup on his big cam 3 in his W900B. Its bitchin