Cummins 6bt 12 valve Diesel conversion Suburban "Subruno" test drive.
Автокөліктер мен көлік құралдары
In this walk around video we highlight the custom features of this 1997 GMC K2500 Suburban Cummins Diesel Conversion. The Suburban is powered by a Cummins P-pump 12 valve. The exterior is a custom matte finish gun metal grey. It also is equiped with custom bumpers, tire carrier LED lights, a 6" lift and 37" tires.
Doing a DIY diesel swap? We’ve got you covered!
GM DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
LAND CRUISER DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
UNIVERSAL DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
Find some of our favorite gear on our Amazon shop: amzn.to/3J3KihN
#AmazonAssociate - We earn a small portion from qualifying purchases.
Thanks for your support!
Пікірлер: 244
I love the sound of diesel engines :-)
IV kept a watchful eye on your progress of this vehicle from over the pond in the UK. man this is my dream motor. love your videos. regards
@jackhill8089
6 жыл бұрын
ceet12 is
Just awesome. One of my favorite vehicles. I had a deisel 92 suburban dually with a full 1 ton suspension setup on it. I regret selling it more than you could imagine. Thank you for sharing!
Awesome job. I have a 1996 Suburban 6.4TD 4x4, I would love this entire conversion.
I have a 2004 excursion I would love to convert to a Cummins, live the work you do!!
This paint makes the whole thing look great. These old subs always look awful in stock paint but you guys really pulled off a great overall look!
One of the best garage builds I have ever seen
@Jonesys
6 жыл бұрын
Thank you
Awesome rig and work! My perfect rig. Would LOVE one!
Man this is such a beautiful truck. I been thinking about doing it on my 99 Chevy Tahoe 4x4
The font match on the gauge pod tickled my jimmies real nice
Should've called it the cumburban. Lol
@luisjonassk8
6 жыл бұрын
Joe DiCocco or suburmmins!
@zacharybishop6595
3 жыл бұрын
Same could be said about my ex girlfriend.
Thanks for your reply, really like this build.
Felicidades por todo el talento y pasión puesto en este proyecto yo estoy mensando en un motor diesel para mi camioneta saludos desde México.
thank you once again one of the best conversion you guys do very good work
@Jonesys
7 жыл бұрын
Thanks for your support.
Time to get back on my 1993 2500 surberbon 4x4 and my 1974 f350 2 wd I like a lot of your part for the build thks
This makes me wanna swap a powerstroke into my expedition
@johnc6466
4 жыл бұрын
Jay Carden just buy an excursion my friendl
@piggsy20
3 жыл бұрын
Put a 7.3 into a 99 black expedition
Man this is beautiful. Great work.
@Jonesys
3 жыл бұрын
Thanks a lot!
Very cool. Excellent work.
Very beautiful truck
Awesome Truck!! Best of luck to you.
Good looking Burb!
LOVE IT!
Great build!
Looks great, love the Cummings swaps.
Thats a sweet rig
Looks awesome!
Love your work! I think I’ve seen all your videos a few dozen times... I was wondering if you could speak to the pros and cons of keeping the 4L80E vs swapping in an NV4500, in terms of cost/benefit, time, difficulty, etc?
@Jonesys
6 жыл бұрын
Will Do
That's awesome!!! I want to do this to a 2dr Tahoe
OMG great job !
Very nice build.
That is great. Man i have a 04 Yukon xl I would love to do this to.
@lorenzovonmatterhorn4756
4 жыл бұрын
Do it bro. And post it. I have a 99 tahoe and a 04 Yukon Denali. Don't know which to do it on.
This is beautiful
That 12v is the best sound.
What a great built!!
@Jonesys
6 жыл бұрын
Thank you. This vehicle will be for sale the spring of 2018 listed at adventurevehiclesnw.com
Perfect, wouldn't change much of anything.
your welcome your work speaks for it s self
@Jonesys
7 жыл бұрын
We try really hard to produce a total package not just a generic builds you see everyday.
Nicely Done!! Beauty truck!1
@Jonesys
6 жыл бұрын
Thanks
Very very nice. I've been thinking about throwing a LBZ in my 99' suburban. Would you recommend the Cummins over Duramax or prefer any diesel engine over any other? Great looking truck sir. Love what you did to it.
My dream suburban
@Jonesys
4 жыл бұрын
Thanks Jacobe, appreciate that!
I was just complaining to my wife the other day that I didn't want a Duramax Suburban, and wished Dodge would make an SUV with a Cummins. Think this would be a better option than putting a 6BT in my 80 series LC.
@Jonesys
7 жыл бұрын
I have done both swaps, Land Cruisers and Suburbans and starting with a larger 3/4 ton vehicle does make the conversion a little easier.
@Fordgroup00
6 жыл бұрын
That would be awesome if dodge came out with a new ram charger but without all the newer crap!
@gabinofitnessjeepzjbejaran1164
6 жыл бұрын
My question is. How long of a process and average price. I have a '98 Burban I want to convert.
Cool , good job .
Country roads take me home!
@fordman2698
3 жыл бұрын
To the place I belong!
I hate people that cheap out and rig the shit out of a build I love everything to almost seem like it should have came from the factory that way and I think you hit the nail of the head and also glad you decided not take the nasty easy way out with a body lift
Dude is that Edgewood? Lol. Nice build man.
@Jonesys
3 жыл бұрын
Hey thanks!
That thing is unreal.
Beautiful Build!!! What lift kit did you use? Thanks!
Fascinating. While I've always loved the Cummins 6BT diesel engine, but I've always questioned the idea of a 5.9 litre inline six engine inside the engine bay of a 6.6 litre V8 engine. You know, will it fit comfortably? Will it work reliably? Since I've never driven either, I've no way of knowing either way.
The center light bar is tied in with the high beams, boy I'd be pissing a lot of people off lmao
Pure Badass.!!
Mean looking ride
First off love this build it’s amazing! Second I just want to know what the cost could be to just do the full engine and transmission swap in my 99 suburban?
@irondiver292
3 жыл бұрын
22,654.34
So sick
Very nice.
This build screams for a SAS
@Jonesys
6 жыл бұрын
The independent suspension and antilock brakes work very well on these vehicles. Also if you want a solid axle you should just build the older body style.
that things badass
Soooooo. How do we discuss doing almost an identical project for my burban. 1997 GMC burban?!
Man, that's a good looking rig. I see this video is a little old. I'd like to know what power mods you made and how well it's running.
I would love more information on the engine ?build? stock? any upgrades...mpg hwy ,city? Thanks
I apologize if it was already mentioned. But if you don't mind me asking, what was your total cost in the swap alone?
The ladder is cool but I honestly feel like with my boots Ill break the rear window trying to climb it lol.
nice very nice job
i know it's a defender series roof rack. but what model number. looks like the perfect size.
How did you reset the odometer or is it a new one?
Did you have to modify/beef up the ifs and steering components to handle the 6bt and 37s? Sweet build 👍
@Jonesys
4 жыл бұрын
3/4 ton steering components are strong enough. 1/2 ton stuff is not.
I need this
I want the wheel tire suspension info awesome
In my opinion it's a really nice truck I got a 1993 but I'm not understanding why the seats are so loss in yours
Also got a cummins swapped suburban although it's a 1991 with a 24v. Definitely much louder in my cab than yours. Just curious if you did anything to quiet the engine noise?
@Jonesys
7 жыл бұрын
The 24v engines are noisier than the 12v. We did however install heavy mass backed carpet form ACC and a bunch of sound deadner from Fat Mat.
Great swap man! Beautiful truck. Did you body lift? or were you able to tuck the 6BT in without a body lift?
@Jonesys
6 жыл бұрын
No body lift
@btomamichel8674
6 жыл бұрын
any quick tips you might share about shoe horning that thing in?
what upgrades will you be throwing at the engine? I love your hard work it makes me want to get my 93 suburban 6bt all decked out. I'm up in Silverdale washington state do you do trades for work as well? I have a military m998 humvee I might be willing to part ways with reply back if you're interested :)
@Jonesys
6 жыл бұрын
Sorry I am not interested in any trades.
@Jonesys
6 жыл бұрын
Vehicle is currently list on eBay buy it now price of $45K. 7 Day auction ends on September 26th 2017
@manvstaco
6 жыл бұрын
did it sell?
Fantastic looking build, don't really understand two key things though, leaving the 12v stock when you're just going to go back into it for more power after a couple miles, I can only assume this is a customers vehicle so you guys can charge again 😅 And secondly, why all the LEDs but leave the stock halogens and incandescent lights around in the stock locations when you could've easily swapped everything to LED for better overall visibility instead of having to hit the highs....that's just me though, if I'm putting LEDs in, I'm doing all of them, plus it looks silly running incandescent lights next to LED.
I’ve got a ‘97 K2500 that I’d love to rip the 350/4L80E out of for a 12v/NV4500 setup.
I have a 98 chevy suburban k2500 with the 6.5 turbo diesel. How much weight did the cummins add and did it effect the steering? Any upgrades on the suspension, steering or drivetrain like the axles/driveshaft/rear end ?
@Jonesys
7 жыл бұрын
The Cummins is not much heavier than the 454 that was removed. I don't know the exact weight difference. All of the bushings and steering linkage was replaced and or rebuilt when the 6" lift was installed. Things can be fined tuned with the front torsion bars if needed.
Can you provide info on what lift kit you used? I have a 1999 K2500 GMC Base Model Suburban and am having a heck of a time finding a IFS lift for it. Appears that only superlift carries them unless there is someone else out there I'm just not finding. Would appreciate your input since you guys trusted it to hold the weight of the 6BT.
@Jonesys
6 жыл бұрын
Tuff Country 16853KN. The wight is supported by the torsion bars which are reused and not included in the lift kit.
Hey, I was wondering if you all had to cut the firewall to fit the 12v. I’m trying to decide between a 4bt and a 6bt cause if I have to cut the firewall I rather not get that deep! Thanks for you help!
@Jonesys
5 жыл бұрын
No firewall mods are required other than bending the pinch weld around the transmission tunnel.
You said you were getting around 18mpg. I'm not a big diesel guy but have been told 4BT swaps are easier in place of standard GM V8's over the 6BT Engines. With this in mind I've been considering a 4BT vs. 6BT swap for my 1999 K2500 Burb or maybe even my 1968 CST 10 Suburban. Having done a lot of work with these can you provide some quick pros and cons to either option?
@brianhaw9398
3 жыл бұрын
Deboss garage put a 4bt in a tahoe. He has a youtube channel and is from Ontario, Canada
Sweet looking Suburban. Awesome looking engine swap. Are you sure about the year? Judging from the front end, it looks like a 1992-95 Suburban. I love the grille.
@Jonesys
6 жыл бұрын
Yes I swapped the work truck style grill in order to gain more room for the charge air cooler and better fit the theme of the truck.
@jasoncarpp7742
6 жыл бұрын
I've always liked the sound of a well-built, and well-maintained diesel engine. Don't ask me why, since I've never owned or driven a diesel powered vehicle.
@jasoncarpp7742
6 жыл бұрын
And how did the grille provide the needed room to accomodate the Cummins Diesel? I would think that because of the length of the inline six engine, you'd somehow need to get a larger engine compartment, or a longer front.
@Jonesys
6 жыл бұрын
It has to do with the marker light and turn signal location on the work truck grill vs regular GMC suburban grill
Do you think a Cummins 6bt swap into a 2nd Gen Avalanche is practical ?
What is the coating on the truck? Raptor u-pol bed liner? Awesome rig! I prefer Ford😜but this rig is sweet! I don't like anymore blockage of my view on the pillars. Already a big blind spot without adding a gauge pod
@Jonesys
6 жыл бұрын
PPG base coat with a flat PPG 2021 clear coat. The texture on the flares is rocker coating and the bumpers are coated with Monstaliner.
Jonesyautoclub, before you sold the Subruno, we're you able to get an idea of miles per gallon?
@Jonesys
7 жыл бұрын
Approx 18mpg but that was before power upgrades
Another question for you, what is the wheel width and backspacing?
@Jonesys
7 жыл бұрын
20x9 with a 00 offset.
Badass!!!
@Jonesys
4 жыл бұрын
Hey thanks, appreciate that!
What 3 gauges did you put in the pillar pod? Transmission temp., boost,and?
@Jonesys
6 жыл бұрын
EGT
Nice conversion!! How much was the total cost of the job?? Am thinking of converting to diesel in my vehicle also..
@Jonesys
6 жыл бұрын
Approximately $45k.
How long does a conversion like this usually take? With swap+new paint like this?
@Jonesys
5 жыл бұрын
4-6 months.
What sort of parts would I need to put that engine into a 1998 Mazda b4000? I know some mechanical stuff but I'm no genius and I don't really have experience
Is it possible to do this on an 2003 Tahoe??
So how much did the truck sell for? Just curious to know how much I'll need to have one built.
@Jonesys
7 жыл бұрын
Finished cost depends on a lot of factors. Paint, interior, power levels, lift, wheels and tires as well as other custom details. To give you a general idea prices can range from $20-$50K or more depending.
@terrencemccargish442
6 жыл бұрын
I think he asked how much this truck in the video sold for. I would like to know too
Where can we get the tow mirrors 🤔
What kind of lift kit
wow!!!!
What's the part number for that roof rack?
@Jonesys
6 жыл бұрын
Smittybilt 45654
what torque converter did you use?
@Jonesys
7 жыл бұрын
Heavy duty clutch with a billet case and larger bearings.
Where can I get the bumpers from those are awesome
@Jonesys
6 жыл бұрын
MOVE. You will have to weld them yourself or have someone like me build them for you.
Im not at liberty here to tell you what you could cut off for me to have one of these!!!
Update on tuning. etc?
Are you using the stock torque converter?
Which rear bumper was used? Move days they don’t have a bumper specific for 97 GMC suburban. Could I use one for the gmc 2500/3500 pickups?
@Jonesys
5 жыл бұрын
The rear bumper came from MOVE and I fabricated and added the ladder and the swing out tire carrier. You can use one for a truck as a starting point.
@Quasar704
5 жыл бұрын
Thanks! This is the toughest looking custom I’ve ever saw in my life💪💪💪. You guys absolutely KILLED this!
Can this be done to a K1500 suburban?
how much did you pay to paint it?