As proof of concepts goes, it doesn't get any better than that. Casting chains have been done for some time, but doing the entire process at home is impressive. Nice one buddy! 👍

@vogman

Жыл бұрын

Thanks buddy. It was fun 😁

We did this exact process with a tulip bracelet! It was successful but there was definite room for improvement. Thanks for the pointers, much appreciated

Id love to see a better breakdown of how you did the chain in Zbrush.

VOGMAN what a groundbreaking and beautiful result! Kudos also on perfectly applying the new PepeTools sander in this project. Thank you for taking us with you on this journey! ❤

@vogman

Жыл бұрын

Thanks Scott for the kind support. I'll be honest, with my limited skills, I'm not sure I would have had the patience to do this without the mini sander. It made light work of an otherwise fiddly job.

Wow, I know how to make these by hand (I am not good at it, just wanted to try) but never thought to try to forge one. I love how you incorporated the normal "wax sprue" into the design model. I envy people like you who can model what is in your head, I have to see/touch something in order to model it.

@vogman

Жыл бұрын

I'm still learning CAD if I'm honest. I enjoy it, but I marvel at the talented of those that make it look easy. I also marvel at the talent of anyone who can make a Cuban the proper way 😁😁😁

@ahammedtechnology3231

Жыл бұрын

Please Cuban chain video full review

Thank you for another great video. I like that you showed the failed casting as well as the successful one.

@vogman

Жыл бұрын

It was a learning opportunity so it needed to be shared 😁😁😁

Awesome you’ve come along way with your 3D design and casting over the years 👍

@vogman

Жыл бұрын

Many thanks. We all get better with practice. 😁

What an incredible looking result!

Great to see a project video from you! The result is amazing

@vogman

Жыл бұрын

Thanks for watching 😁

Brilliant work

That is amazing and the results look great.

@vogman

Жыл бұрын

Many thanks 😁

Outstanding

Very cool! Id love to see more articulated projects.

Amazing work, Guy's ❤🎉

@vogman

Ай бұрын

Thank you so much 😀

I love these videos. Don't pay attention to the haters.

Thanks for sharing your experiences in casting a chain. If you are going to wear it on your wrist, you probably need to cast it as a open chain, and then get a clasp and jump rings from Rio Grande to finish it. They probably have items that are the same metal as your cast. I enjoy all of your reviews and demonstrations.

@vogman

Жыл бұрын

I can cast the appropriate fittings on the ends, or cast an open link to manually attach. It has great potential to some I'm sure 😁

@alfabsc

Жыл бұрын

@@vogman Your solution will be the best, I'm sure.

That actually looks amazing, well chuffed with how it came out! Keep up the good work buddy!

@vogman

Жыл бұрын

Many thanks 😁

I sure like your articulating castings. Very well done.

@vogman

Жыл бұрын

Many thanks 😁

Looks fantastic, it’s an expensive hobby but I’m still going to have a go at it.

Just wow🎉

@vogman

Жыл бұрын

Thanks Kenny 😁

Mini Vogman has more bling than me!

@vogman

Жыл бұрын

You should see his choice of evening wear....

@ibz0991

Жыл бұрын

Thank you for bringing me here Tu!!!

@tudesomer-chu1219

Жыл бұрын

​@VogMan is that who you make all the jewellery for?

@vogman

Жыл бұрын

Mini Vogman? Yes. But he pays with resin tokens.

Superb results. Great work especially for the one who is good at being lazy :)

@vogman

Жыл бұрын

Gotta be lazy. Work smart, not hard 😁😁😁

I will love for you to make a video on how to get started and hardware recommendations that will not break the bank. This looks amazing well done.

@vogman

Жыл бұрын

You need to look at some of my older stuff. This video will give you an idea. There's cheap DIY versions mentioned. kzread.info/dash/bejne/o6yel8eOm6Sshaw.html And whilst it talks about Lost PLA, the same thing applies to Castable Resin 😁

Amazing proof of concept. Once I get my Al bronze mixture just right (getting that stuff to wet out is interesting) I want to try some articulating pieces.

Excellent job 👍

@vogman

Жыл бұрын

Thanks John 😁

Very cool!

@vogman

Жыл бұрын

Thanks John

This is dope

Mind sharing the casting and flask temps you used for the bad and good cast?

Every time I see these videos you make me want to buy everything needed for metal casting, too bad I can't do it because I live in an apartment building. Still waiting for the video on my fellow villagers of the Bluecast.

gosh you're genius

@vogman

Жыл бұрын

You're very kind, but honestly it's a very simple concept 😁

Fantastic

@vogman

Жыл бұрын

Many thanks 😁

Fantastic! I'll be looking at doing something like this at some point, I'm sure. Love your videos. I've used your videos to get myself set up for casting and am having a bit of trouble getting a good seal on the Kaya Cast in the casting chamber side. Arbe is sending me replacement gaskets to see if that's the problem, but I was wondering if you had any tips for getting a good seal on that casting chamber side.

@TurdFergusen

Жыл бұрын

I've seen people push the flask down with the tongs to get the seal, did you try that? Also make sure there are seals between each spacer.

Very interesting indeed :)

@vogman

Жыл бұрын

Many thanks 😁

You're the bomb

Nice I’d love to have that file

Ive been wondering the same thing lately!

@vogman

Жыл бұрын

If you can print it, you can cast it 😁

Amazing absolutely love your channel! I just got my mono 2 this morning so it's set up time now I was just wondering about the 3.0.2 software slicer with it I bought the mono 4k about 3 weeks ago but needed a second and love my 4k so with that mono 2 being on promotion price both mono 2 and wash amd cure for £199 I grabbed one! As of today it's that just for the printer or £338 for both so saved £100 it's a spare wash and cure anyway! OK what I was wondering was the 4K slicer I installed can I keep that going as well as the new mono 2 version I'm away to install or will I need to use the same one and change the settings everytime? It might not be an issue as use lychee now for the mono 4k all the time I'm getting good test prints in the validation test matrix but the right sided slider up the sode I'm still getting the step lines! Have you Any tips on how to get them gone or near gone?

@Vogman, if you want to cure parts that are hard for light to reach through air (common curing way), then use a water container to submerge the part in water and then light up the container using a UV light reflector to cure the part there. Water is a really good medium for light to travel through:) I'm sure I'm late to the party with this comment, but if I'm not, I really hope it works for you:) Top videos as usual!!!:)

@vogman

Жыл бұрын

Many thanks, but be careful with water and castable resins. Not all of them get on well with water and that can lead to poor castings 😁

@emilianofisanotti9639

Жыл бұрын

@@vogman Oh!!! I don't do castable stuff so I didn't know that!!! I keep learning stuff in this channel!! Thanks man!!! Also, love the humour

The possibilities are endless, you could cast a rattlesnake rattle pendant with that

people actually didn't believe you cast that mindblowingly awesome dragon chain?!? 🤨 I'd take that as a compliment 😂

@vogman

Жыл бұрын

I had one guy write and say he was going to report me to KZread. I told him I still had the casting so he was welcome to do so. I guess some people just don't understand the possibilities 3D printing have presented us with 😁

nice work mate, what burnout cycle did you go with for this ?

Just wondering now it's been over 2 years since you brought your auto tool melting furnace hows it holding up? Is it still heating to the same temputures and is it durable still?

@VogMan would this be a compatible resin for my elegoo mars 3 pro?

Amazing. I tried a file off of ch trader and were fused. Elegoo mars pro not the 2nd one siriya true blue cast. Would love someone who uses my exact machine to chime in on better settings. Vog love your videos been watching for few years now❤

@vogman

Жыл бұрын

Many thanks 😁

Do you have a course where you are teaching how to create those files? Cheers

How small were the gaps between each link? If you don't mind telling me, of course. I've been trying to cast a similar piece but im worried i'm working with tolerances a bit too tight (about .25mm).

I'm so impressed with the outcome. Any Mexican chains coming soon? I see you use a different flask than normal. What's the difference apart from the holes please?

WOW! looks beautiful!! I cant tell whether its a plated chain or 100% bronze, I'm really new to this! please clarify for me?

@vogman

Жыл бұрын

This is purely bronze. It shines up very nicely, though it will tarnish over time 😁

Hey big I have a quick question . Do you need an expensive computer to run the cad or the slicer program ?

can i ask what investment you are using? always gives such a good result!

Has Anycubic contacted you to review their new Photon Mono M5s?

I've always wanted to cast something like this but shrunk to ring size.

Oh yea

@vogman

Жыл бұрын

👍👍👍

anyone have a link for the cuban file? or does vog have the file somewhere for download?

Hello please suggest me best resin 3d printer for jewellery work on a budget

@vogman

10 ай бұрын

Here you go. Look at this. www.vegoilguy.co.uk/3d-resin-printing-jewellery.php

Is that the only resin you can do that with ?

@vogman

Жыл бұрын

For this process I'd recommend a resin that doesn't need curing. X One is a good choice. Power Resins do a few, but they're double the cost.

Quick question do you prefer this to the Siraya tech resin? Hopefully I win a free bottle hahahah but if I don't which one would you buy?

@vogman

Жыл бұрын

99% of my casting is done using Siraya Tech cast. It's affordable and you get a nice big bottle for your money. It prints very well and it casts beautifully. However, sometimes alternatives are needed and Bluecast X One was perfect for this situation. I hope that helps.

@hk6562

Жыл бұрын

@@vogman Thank you so much that's why I'll always keep watching your videos, I love your honesty!

Can any one explain it to me please thanks you

Sorry may bé IAM dump but thé loops of thé chain will stick to getter to make them solid and not moveable

The machines to make Cuban chain have been around since 1980, they are much faster than in 3D, in addition to the quality, hardness and final finish, is much better. There are many things where 3D printing is NOT competitive.

@rickstard73

7 ай бұрын

He's obviously not a jeweller, hobbies are not about productivity 😊

Bullshit

@vogman

5 ай бұрын

Are you? Don't run yourself down like that.

@robc26

5 ай бұрын

@@vogman am I what homeboy? Was calling bs to the concept and its viability, not your skills or the final product.

REVIEW PRINTERS MY GUY TO KEEP THIS CHANNEL ALIVE. NOBODY INTERESTED IN CUBAN OR MEXICAN GOLD CHAINS LOL PRINTERS PRINTERS PRINTERS IS WHERE ITS AT SO CUT THE BS

@vogman

Жыл бұрын

BS? I'm not sure I'd agree. This Channel is me... it's my interests... the things I like to do. I'm not sponsored by anyone which gives me the freedom to be and to do what I want. I was metal casting before I was printing. For me the two interests overlap and I know the same goes for many of my viewers. It might not suit everyone, but they don't have to watch.

@AtkinandSon

Жыл бұрын

2.8k viewers probably disagree with you JR.

@jaimierogers4388

Жыл бұрын

I'm one of the 108K subscribers who disagree with your suggestion. If I only want to watch 3D printing reviews I have a number of options. But how does that help me with casting? And are those channels looking at printers from a casting perspective? When I'm looking for casting info those channels won't help me. I'm glad VOG is here to give his perspective and tips.

@CroFittings

Жыл бұрын

I started watching to learn about how resin printers can be used in the casting world so all the videos whether they are printer reviews with casting elements in them or specifically about casting with the use of a certain printer are useful to me. I don’t care what the casting may be, it’s the process I’m interested in watching. So I think it’s all valid, don’t like it? Don’t watch.