Nice to see a gun made for Canada getting some love! This is my main rifle, my SHTF gun. At least until I have enough to get myself a CZ Bren 3 MS but as far as I'm concerned it performs more than well enough for what I have it for. Plus the Bren 2 is like 3 thousand dollars lol. I also found out that they now offer a shorter barrel complete upper that comes with a new bolt, bolt carrier and spring system so you just push out your pins, drop the lower and throw the shorter upper on and because its just the upper you dont need a restricted license to buy it now but of course if you want to actually put it on the gun you will need one when you want to use it. You just have to register it as a short barrel rifle within 30 days physically attaching it to the lower. They only make them for the Gen 1 rifles (they did a revision to cut some of the weight off the rifle cause it is pretty heavy with the monolithic upper) but having the shorter barrel would make it even better for me.

Great video Corey.

It would have been nice to see a spread of bullet weights as well as brands, since some barrels prefer heavier or lighter……though there is a bit of a rabbit hole to go down on that topic. Still, just to see if anything happens.

To anyone looking to purchase one of these rifles. Just note that I waited 3 months from time of order. (Was supposedly 7-14 days) To receive a rifle that looks like it came out of the rejection pile. Stock and barrel etched, scratched and pitted. Like not even just a little bit. A LOT. Im completely mind blown and pissed. A paint job wouldn’t even cover up the pitting and some of the scratches. The Emailed pictures to crusaders and they have turned a blind eye.

@TravisJamesMMA

Жыл бұрын

Oh man sorry to hear that, thank you for this, I have been leaning further towards getting one, now I am hesitant

@gerade-aus

10 ай бұрын

People said the same about the Robinson Armament M96. Mine was flawless and now worth >$5k when you can find. Only 2 thou were made, extremely rare. Get your rifle QC'd if problem is legit.

@CodeOfArms

10 ай бұрын

General turnaround time is different from active turnaround time. Like any industry, when there is a back order on parts, wait times can vary. 3 months sounds excessive. However with a Lifetime warranty and one of the best customer service support in the industry, I would assume you made contact and were all taken care of.

@MaritimeHomesteader

7 ай бұрын

Mine didn’t have a scratch on it. The e clip did come off of the bolt release after a dozen rounds. Apparently they had some that went out that the eclip wasn’t installed correctly. They sent me some new ones and I installed it correctly I hope and haven’t had any issues after shooting another 60-70 rounds through it.

Although I agree with your choice of ammo being stuff that people will actually use in this type of rifle, I have a feeling that it would be quite a bit more accurate with heavier match hollow point loads like 69gr, 75 and 77gr

@adamknapp653

Жыл бұрын

I was thinking the same thing. Especially if the barrel twist is 1/7.

@CodeOfArms

Жыл бұрын

Appreciate the input...We will definitely start to build up a collection of some heavier Match grade ammo options and do an update in the future.

@user-ee4jy5pp7m

Жыл бұрын

I always use heavier ammo on a new rifle for "break in"

Looks neat….

I’m thinking of getting one of these in 7.62x39, but I assume in 556 you can use 10round pistol mage, whereas that’s probably no an option in 7.62, right? Any input on that from you guys? If not, I may get the crypto. Not sure

Under 2 moa with bulk ammo is Pretty good for a piston gun.

@CodeOfArms

Жыл бұрын

That's what I thought initially as well. Especially based on previous semi's I have tested.

@kevinforget549

Жыл бұрын

Hopefully the same holds true for the liberator 556 upper. Just picked up a used one based off your guys channel.

Good video, I'm curious could you tell me what scope mounts you're using on this?

@CodeOfArms

10 ай бұрын

Using vortex tall mounts

Thanks for the video! If you shoot hand loads out of this rifle does it void the warranty?

@CodeOfArms

Жыл бұрын

Not if you don’t tell anyone 🤷🏻‍♂️

When will there 7.62 x39 using a AK mags be coming to market?

@CodeOfArms

Жыл бұрын

I’m not sure when that will make its way to the public yet. I would guess maybe spring/summer

Bought one from the Black Friday sale. Been out a few times with it. So far not overly impressed. Accuracy my getting with the 55gr was similar at 1.5 moa average.

@kevinforget549

Жыл бұрын

it isnt realistic to expect sub moa out of a semi auto especially if you aren't using handloads.

@tburrows357

Жыл бұрын

@@kevinforget549 actually I could have worded that better. The accuracy is actually quite good and reliable at 1.5 moa and what I expected out of this rifle. I have done 5 round groupings and the accuracy has been the one thing I’m happy with. I have AR15 that are sub moa builds with factory ammo. No. What I’m not impressed with is that I have had light primer strikes about every 20-25 rounds. Ordered a new hammer spring to hopefully fix that. And the platform is extremely finicky with which magazines one uses.

@christopherono6587

Жыл бұрын

@@tburrows357 - curious that you've had that experience. I have the Crusader 9, which has a different magwell, but it's used PMAG Gen 3s, Hera H3s, STANAG and Lancers with no trouble. What happens with the "wrong" magazines, for you?

@tburrows357

Жыл бұрын

@@christopherono6587 Heras would not stay locked in and would drop out or drop down for failure to pick up a round. Pmag 3’s also wouldn’t fully seat so they should fail to lock in. Crusader arms admitted this on a instagram post reply but it was the Gen 2’s that were the problem

@christopherono6587

Жыл бұрын

@@tburrows357 Ah, interesting. Weird that mags that would work fine on the Crusader aren't working well on the Templar. Very strange.

Is this in canada ?

@CodeOfArms

Жыл бұрын

Yes it is www.crusaderarms.ca

Thank you for the review but i wish more people would invest in a lead sled for accuracy vids. Too much room for error without one

@CodeOfArms

Жыл бұрын

I couldn’t agree more! The problem is we have limited options to mount them properly at the ranges

@The1Gypsy

Жыл бұрын

@@CodeOfArms ah i see. Looks like good grouping either way so no biggie

@The1Gypsy

Жыл бұрын

@@CodeOfArms have you got the new BCL in yet? Would love to see a review

Ladies and Gentlement: Keep the pedal to the metal.

While firing your 2nd last group, your rifle rest was tipping over.

@CodeOfArms

Жыл бұрын

Yeah not the best platform, much to be improved on. Just a testament to how much better this could group under better circumstances, the shooter being one of them lol

Why not match your bullet weight with your twist? 55grain bullets are generally used in barrels with 10" or 12" twists. Website says Templar has a 8" twist, your optimum bullet weight for stability would be 65gr to 75gr. Beyond that, fooling around with seating depth can shrink groups even more.

@CodeOfArms

Жыл бұрын

Thanks for the feedback, the truth is, we are using what we currently have available in stock. Ammo selection here has been very limited. We are excited to put your suggestions to the test and get our hands on more suitable ammo.

@user-ee4jy5pp7m

Жыл бұрын

Yea. We're lucky to have the ammo we do have here in Canada right now.

@Spruce-Bug

Жыл бұрын

That's completely reasonable. If anything, this shows the templar is still a capable rifle with less than optimum ammunition. Good video.

Not available in Canada?

@CodeOfArms

Жыл бұрын

Yes it is available in Canada Just Google Crusader Arms Templar

@lauriesloan

Жыл бұрын

@@CodeOfArms Ok, so It didnt make the c-21 list or the stupid amendments

@CodeOfArms

Жыл бұрын

@@lauriesloan No not part of C-21 and as for the Amendments None of that has become law and is looking like they are being pushed in the direction to have to drop it this time around. 🤷🏻‍♂️

@lauriesloan

Жыл бұрын

@@CodeOfArms Nice! Thanks for the response and to the CCFR!!

@jay-firstofhisname

Жыл бұрын

@@CodeOfArms AR180 and AR180 variants are on c-21. Effectively putting this gun on the list.

No offence, but this video should've been 3-4 minutes instead of 10. Also when are you going to post footage from the big summer match?

@CodeOfArms

Жыл бұрын

No offence taken, I try to add more commentary for newer shooters who come to the channel to learn. I know some stuff can seem obvious to more experienced shooters. Match video is in the editing queue. Likely in the spring.

Combat badger.😂😂

I wanna get my hand on that one but with fuckin Bill C-21 its like buying a illegal firearms 🤦‍♂️

@CodeOfArms

Жыл бұрын

Still legal! The C-21 Amendment is getting heavy resistance, so no really telling if it will remain part of C-21. IMHO that’s all the more reason to get one while you still can!!!_

@gord1527

Жыл бұрын

I want one too but it's alot of $$$ for a potential safe queen.

@MrGwell

Жыл бұрын

@@CodeOfArms yeah but Will they make us all felon and seize our firearms without Buy back🤬

@tburrows357

Жыл бұрын

@@gord1527 for the price and a 5.56 / .223 rifle it is steep cost. I did buy one myself. It was this or the H&K SL8. Sl8 would have cost a little more then all the accessories it was more then I wanted to consider but it’s proven reliability. Am i disappointed I went with this rifle? Only time will tell.

@CodeOfArms

Жыл бұрын

I like the SL8 but to be honest, it feels awkward in its “Canadian configuration” if I could get the G36 version I would dig it more. But still not sure I feel about HK plastic to the Templar robust aluminum and steel!

3000 dollars for à rifle over 1 moa accuracy ,,,,your rifles are over price .

@jimf1964

3 күн бұрын

$3000! Not even close! It’s going for $2000 Canadian.

Way too much talking...

@CodeOfArms

9 ай бұрын

Lol….one of my many faults. Thats what the fast forward button is for!

As "cool" as this gun looks, it's a bad purchase. This company won't be around forever and once parts brake and they can't be sourced any longer you've got an expensive paper weight. Ask me how I know this.... I bought a DRD Tactical Paratus... proprietary parts and now gone!

@thephantomzoneboxing

Жыл бұрын

3d printing is an option!

@VA6OIL

Жыл бұрын

That's what a machine shop is for

62gr PMC xtac not 63 that's not a thing

So this is a sub moa gun with 77g match ammo. 2 in with bulk ammo is about as good as you can get.

@CodeOfArms

10 ай бұрын

I would say with all variables being optimal, shooter, conditions, ammo, etc…it is capable of achieving sub Moa results.