Youre a lifesaver man!! Thank you so much for showing us what you were doing. So many videos skip to after things are done. This helped so much!!!

on my 98 p73,the end links grease zerks were plugged, i changed them,now i can get grease in! on super tight u-turns something squeaks on my cv. a-arm bushes are good. no slop in the steering. nice video,subscribed!

Awesome!! Thanks so much for the clear and succinct video. My 06 has a bad link. When it warms up I'll be replacing it and the brakes too. Couldn't do it without your help.

Great video man mine were just done but my actual sway bar buschings bad just got those to do too

Easy enough! Did all my ball joints. Just clunky links left. Just ordered the same links 13$ on amazon

@jakethesnake4971

Жыл бұрын

Did a pickle fork work? If not, how'd you do it?

This is the exact problem I'm having. I raised the hood and with my hands I quickly moved the car up and down and imitated the sound it makes on the road which is like a clank sound. Although when I'm driving it sounds worse since I cant get a lot of force

Next time Jack up the lower control arm to relieve pressure it will come right

I have 01 grand Marquis when driving hit a dip in road it is scary. It’s like the passenger side pulls against the driver . Could that be the sway bar bushings?

@JackofAllMasterofNone

11 ай бұрын

Doubt it.

with cold weather whenever l go over a bump the noise from front end on one side goes klunk and over several bumps its klunk tee klunk klunk. on warmer days not noticeable. would u suspect it to be front end link.??

@JackofAllMasterofNone

3 жыл бұрын

Most likely yes. The grease gets hard when it's cold, which makes the problem more evident.

@carltorjusen558

3 жыл бұрын

@@JackofAllMasterofNone thank u 4 reply. l have a 2004 focus and 2 times l have had to replace the pair. 1st @ 30,000 miles and 2nd @60K bout 2-3 years ago. car has close to 70k miles. going to order a pair in addition to other parts. as parts get hard to get after 20 years of auto.

@carltorjusen558

3 жыл бұрын

replaced one side. no clunking going over bumps. great..!!! also l notice that l have less play while driving with steering. l use to have to correct a lot of times on driving. have slight wheel play but not as bad as before. guess l should replace the other side and hope to have almost zero wheel correction on drive. Took 3 hours from start to wheel installation. not bad for a 75 year old man. guess the car will outlive. Great video and thanks

@JackofAllMasterofNone

3 жыл бұрын

@@carltorjusen558 Excellent. Yes. I would definitely do the other side too. I'm sure it's bad also.

When buying these Crown Vic, Grand Marquis Suspension parts, by greasable ball joints, tie rods etc, they are a better choice and will last much longer. Just grease them everytime you change the engine oil.

@JackofAllMasterofNone

11 ай бұрын

Good advice

Good job thanks for video

What if my top one is bolted on just the bottom nut came off how do i get it to line up with the swaybar hole? Pls help i will be working on today

@JackofAllMasterofNone

Жыл бұрын

Pull it into place. It can help to jack up one side or the other to relieve pressure on the sway bar.

Mine sounds like a "kink" sound. Do you think this could be the issue?

@JackofAllMasterofNone

Жыл бұрын

Not sure. Many thinks can make a sound

Same Here. My sway bar makes a loud Rattle

@neroviggs5467

2 жыл бұрын

Mines doing it now I drive it to work gotta get it fixed asap

What is that squeaking nose that's what I'm hearing in a2002 and it's mostly bumps and steering l/r

@bjccq2924

2 жыл бұрын

Lower ball joint my man. Get it before you’re front end drops. Dealt with it a month ago with my 96. Structurally the same I believe

@a.kblur04

2 жыл бұрын

I've been told it's actually sway bar links. I bought some, gonna fix it when they come in. Sounds like a bad mattress lol

@ogloc6308

Жыл бұрын

probably balljoint. It can get pretty dangerous to drive with a failing ball joint. The suspension can collapse and cause you to crash

@ryan-qp3hw

Жыл бұрын

could be front shocks, Lower ball joint, or sway bar link. ive dealt with all 3 sadly but she rides just like new after completely refreshing all the suspension with new!