Crown Victoria 2005 radio removal. This clearly states how to remove a newer version 2005 Crown Victoria head unit.
Жүктеу.....
Пікірлер: 91
@woofwoofdoggo8 жыл бұрын
It's crazy how helpful this video has been to people. I hope you all are driving safe out there with your vics!
@Daoldhead51
7 жыл бұрын
mariomonterroso59 Great vid kid.
@chriswyers9619
3 жыл бұрын
Whackers
@thomasbrown7728 Жыл бұрын
It’s 10-22, I just watched you’re video. I used 4 nails. Worked perfectly. Thanks
@rodneybeckett89032 жыл бұрын
Thanks brother! Still helping ppl with this video. You saved me ALOT of time. Thank you! I hope you and Morgan are still together and happy.
@tylerpaige59973 жыл бұрын
still helpful in 2020, lol. thanks brother
@woofwoofdoggo
3 жыл бұрын
You're welcome!
@markogle19495 жыл бұрын
Many thank yous for the hanger trick, and advice on the radio removal! Had a bad antenna wire and we go it out with your help!
@misheedawn3214
4 жыл бұрын
Mark orgle how did you fix it? My anteena does not work.
@markogle1949
4 жыл бұрын
@@misheedawn3214 if you disconnected from the radio, you'll have to disconnect antenna and possibly wire with it . Then refish the wire under the dash. When you pull wire watch where it comes out from
@joelgomez58062 жыл бұрын
You a real one G 💯🙏👌🔥
@canyouhelpmeplease692 жыл бұрын
Good for you kid ya made your own tool. A nail works as well.
@DeathFromAbove_5.5610 жыл бұрын
You can buy a 1.8" metal rod at home depot for $2+,real sturdy. Used your video as a reference. Great video/tutorial. Thanks a lot. Just waiting on my dash kit.
@sh96838 жыл бұрын
great video. thanks for sharing, I did not have thick coat hangers, just the thin ones, and i still managed to get the unit out quickly {less then 2 minutes}. was worried i would have to take to whole front panel off to get the unit out. this was a piece of cake. thanks
@woofwoofdoggo
11 ай бұрын
You're welcome!
@ILSRWY46 жыл бұрын
I suddenly was transported back to high school, while watching this video.... smh...
@davidcrispin1326
4 жыл бұрын
😂
@misheedawn32144 жыл бұрын
Thank you.
@woofwoofdoggo
4 жыл бұрын
You're welcome 😊
@xrated6796 жыл бұрын
i got a 03 crown vic, i got all the stuff i need fer a stereo except for the stupid wire harness to hook up my new deck.. an i cannot find one anywhere its pissin me off
@justsomecanadian7 жыл бұрын
Best vid on KZread on this topic, thanks for sharing bud!
@pi186791013 жыл бұрын
Thank you
@spinorules113 жыл бұрын
Just bought one and am gonna put in touch screen on it...we’ll see if this helps thank you 😊
@RobinWijland11 жыл бұрын
These are for power seats, if you don't have these 8-way buttons you car has manual seat adjustments (the black bar under your seat)
@Alexiotheconquerer7 жыл бұрын
Took literally seconds. Excellent advice!
@scabbythecrownvic38702 жыл бұрын
That dash was the same from 1995 to 2011
@kadene1968 жыл бұрын
This was helpful! Though this was good I suggest Crutchfield for any aftermarket parts they can walk you through The whole process, and they have 24:7 support for that! I use that. I used it for my BMW before and now I'm using them for my 2000 CVPI!
@guccistang6 жыл бұрын
Bro, you are the best! Ballin on a budget
@samuelbullert54819 жыл бұрын
I like how you say you're too poor to buy the $3 radio removal tools but you're able to buy an after market radio and a mount for the radio lol. I'm sorry if I sound like a dick for teasing you about that but that's not my intentions. I just got a kick out of it :P
@alejandrob-c22773 жыл бұрын
I found the rods at autozone
@richardgodlove96627 жыл бұрын
3 years and you're still helping with this video. I was getting ready to remove the entire dash cover when I decided to check to see if anyone had shown this. You saved me A LOT of useless work. Thank you.
@woofwoofdoggo
11 ай бұрын
You're welcome!
@minutemanproductions80294 жыл бұрын
You can also use nails instead of the hangers
@astralcrush8 жыл бұрын
Thank you! extremely helpful!
@GeometryDashAcamar7 жыл бұрын
thank you. this will help in the future.
@NuisancePanda6 жыл бұрын
Dustin Henderson doing KZread vids?! Meh, I've seen Stranger Things
@alejandrocisneros16528 жыл бұрын
thanks bro! this helped a lot
@RussellBensonOKC8 жыл бұрын
Finally a decent video from someone who isn't a dweeb. Thanks much, very informative.
@74barracuda199 жыл бұрын
Thank you....thank you....thank you. I sincerely appreciate you posting this, especially since we have the same year / model (2005 CVPI). I couldn't believe just how small in-depth the stereo is either; but, at least you answered my other "question" in that I can have plenty of room for the aftermarket one I'm purchasing soon. (I also agree with Samuel Bullert on the too poor for $3 and purchase the stereo you have. Again, just got a kick out of it...not to insult.) Also, you have a very beautiful girlfriend. Wish you two the very best! All in all, thank you again for a great video and such a simple technique and "smart" tools removing it. Thank you. Take care and be safe. Have a GREAT day.
@SETHISSOCOOL1004 жыл бұрын
Yo thanks man and also Thankyou Morgan
@prestonmarkham17114 жыл бұрын
Link to adapter?
@willyG5038 жыл бұрын
HEY MAN I HAVE A QUESTION : Instead of buying the whole radio. Can I just add a aux cable in the back my 08 crown vic radio ?? I known some ppl who've done that on different models, but I don't know if will work on mine... !! Thank for your reply !!
@WarTornProductions9 жыл бұрын
Appreciate it dude, how old are you? My first car is a 98 crown vic we fixed up so this helped a lot
@kmorton545 жыл бұрын
Excellent Video!
@patrickbarnwell4925 жыл бұрын
Advanced auto parts had them for $9 lol
@joshuamorehead6124
4 жыл бұрын
Why would you spend $9 and you're gonna do it only once, when you could do what this guy did for free
@ricklugo617 жыл бұрын
thank you!!!!!!!!! lots of help!!!!!
@totljag18 жыл бұрын
the right side don't click , it goes all the way through , I even went to buy the tool ! any ideas ?
@zeke20955 жыл бұрын
Scosche is spelled like Porsche so I think it would be pronounced like Porsche is correctly pronounced, just a guess.
@ShumaiAxeman5 жыл бұрын
P71 crown vic? Or just the regular civvy one?
@notflanders49674 жыл бұрын
Thanks for sharing!
@drewhon6 жыл бұрын
Nice video guy thanks
@RightAway8711 жыл бұрын
I have a 2008 ford CVPI with disconnected front speakers, presumably for the police who used them for their radio. I removed the front passenger side kick panel and found 4 wires (2 wired in 2 pairs) labeled RH Speaker LH Speaker. They looked like they were cut, or never stripped and put where they belong. Any idea on how to get them wired up so I have front speakers again?
@mikewalkingbear2998 жыл бұрын
thanks man, well done!
@totljag18 жыл бұрын
I messed up the right side with the hangers , left side try to come out but I think I destroyed right side holes now what ?
@FranksShitBoxCollection
8 жыл бұрын
+totljag1 You probably figured it out by now but you could use a prying tool, $1-2 on eBay, and remove the entire assembly and basically force the stereo out of it but you might need some elbow grease for that one.
@lindyp3811 жыл бұрын
It worked. Thank u. Radio came right out. Is there a direct radio replacement with a c d player?
@jonnyhogarty6 жыл бұрын
Good video dude good job
@totljag18 жыл бұрын
My right side won't click ? Help
@brentboucher203310 жыл бұрын
What install kit did you use. Mine has a ton of tabs on it that won't allow it to go in
@christianwoods6701 Жыл бұрын
Tell me y’all got married?
@dougtraig634210 жыл бұрын
Which mounting kit did you use?
@Zulfrah11 жыл бұрын
what do the buttons on your door do? i have a 2005p71 but i do not have those 2 buttons. 0.15
@joemama703111 жыл бұрын
Great video.
@DellOptiplex11 жыл бұрын
Thanks, that seems easy.
@ktthompson14715 жыл бұрын
im poor too my man but you cool tho but do u need to disconnect neg battery before doing this
@jojojorge95 жыл бұрын
Gracias broo
@cesarperalta58018 жыл бұрын
I have a 2000 vic is it the same procedure?
@kekun3740
8 жыл бұрын
+cesar peralta 98 to 11 is supposed to be the same. Not sure about the lx, but if you have a p71 it should be.
@kailanimccaffrey68577 жыл бұрын
cool vid. Thanks
@dankyss6 жыл бұрын
Thanks!
@mohammedhilabi48648 жыл бұрын
Very good my dear
@joker11asr10 жыл бұрын
2160p?
@robitaill35 жыл бұрын
I might asth we'll get a sthock radio
@apollosingleton89704 жыл бұрын
🤔..Brilliant!!!
@joecandor67467 жыл бұрын
I would be offended, if I knew what that statement meant. You should release a follow up video with your hanger picking a JEW-FRO!
@mistatibbs758910 жыл бұрын
TA TA TADAY JUNIOR!!
@hugozac88
7 жыл бұрын
Tyler Christen lol Billy Madison
@OmgitsTay5 жыл бұрын
2019
@chriswyers96193 жыл бұрын
Stranger things
@77creid7 жыл бұрын
Morgan is hot!!!
@GeometryDashAcamar
7 жыл бұрын
lmao this was funny
@ezzmny28258 жыл бұрын
getto haha
@danripley71629 жыл бұрын
Would a newer radio work on a 93 CV too? I'm looking to upgrade, lol I can't take cassette anymore.
@mikewalkingbear2998 жыл бұрын
thanks man, well done!
@brentboucher203310 жыл бұрын
What install kit did you use. Mine has a ton of tabs on it that won't allow it to go in
Пікірлер: 91
It's crazy how helpful this video has been to people. I hope you all are driving safe out there with your vics!
@Daoldhead51
7 жыл бұрын
mariomonterroso59 Great vid kid.
@chriswyers9619
3 жыл бұрын
Whackers
It’s 10-22, I just watched you’re video. I used 4 nails. Worked perfectly. Thanks
Thanks brother! Still helping ppl with this video. You saved me ALOT of time. Thank you! I hope you and Morgan are still together and happy.
still helpful in 2020, lol. thanks brother
@woofwoofdoggo
3 жыл бұрын
You're welcome!
Many thank yous for the hanger trick, and advice on the radio removal! Had a bad antenna wire and we go it out with your help!
@misheedawn3214
4 жыл бұрын
Mark orgle how did you fix it? My anteena does not work.
@markogle1949
4 жыл бұрын
@@misheedawn3214 if you disconnected from the radio, you'll have to disconnect antenna and possibly wire with it . Then refish the wire under the dash. When you pull wire watch where it comes out from
You a real one G 💯🙏👌🔥
Good for you kid ya made your own tool. A nail works as well.
You can buy a 1.8" metal rod at home depot for $2+,real sturdy. Used your video as a reference. Great video/tutorial. Thanks a lot. Just waiting on my dash kit.
great video. thanks for sharing, I did not have thick coat hangers, just the thin ones, and i still managed to get the unit out quickly {less then 2 minutes}. was worried i would have to take to whole front panel off to get the unit out. this was a piece of cake. thanks
@woofwoofdoggo
11 ай бұрын
You're welcome!
I suddenly was transported back to high school, while watching this video.... smh...
@davidcrispin1326
4 жыл бұрын
😂
Thank you.
@woofwoofdoggo
4 жыл бұрын
You're welcome 😊
i got a 03 crown vic, i got all the stuff i need fer a stereo except for the stupid wire harness to hook up my new deck.. an i cannot find one anywhere its pissin me off
Best vid on KZread on this topic, thanks for sharing bud!
Thank you
Just bought one and am gonna put in touch screen on it...we’ll see if this helps thank you 😊
These are for power seats, if you don't have these 8-way buttons you car has manual seat adjustments (the black bar under your seat)
Took literally seconds. Excellent advice!
That dash was the same from 1995 to 2011
This was helpful! Though this was good I suggest Crutchfield for any aftermarket parts they can walk you through The whole process, and they have 24:7 support for that! I use that. I used it for my BMW before and now I'm using them for my 2000 CVPI!
Bro, you are the best! Ballin on a budget
I like how you say you're too poor to buy the $3 radio removal tools but you're able to buy an after market radio and a mount for the radio lol. I'm sorry if I sound like a dick for teasing you about that but that's not my intentions. I just got a kick out of it :P
I found the rods at autozone
3 years and you're still helping with this video. I was getting ready to remove the entire dash cover when I decided to check to see if anyone had shown this. You saved me A LOT of useless work. Thank you.
@woofwoofdoggo
11 ай бұрын
You're welcome!
You can also use nails instead of the hangers
Thank you! extremely helpful!
thank you. this will help in the future.
Dustin Henderson doing KZread vids?! Meh, I've seen Stranger Things
thanks bro! this helped a lot
Finally a decent video from someone who isn't a dweeb. Thanks much, very informative.
Thank you....thank you....thank you. I sincerely appreciate you posting this, especially since we have the same year / model (2005 CVPI). I couldn't believe just how small in-depth the stereo is either; but, at least you answered my other "question" in that I can have plenty of room for the aftermarket one I'm purchasing soon. (I also agree with Samuel Bullert on the too poor for $3 and purchase the stereo you have. Again, just got a kick out of it...not to insult.) Also, you have a very beautiful girlfriend. Wish you two the very best! All in all, thank you again for a great video and such a simple technique and "smart" tools removing it. Thank you. Take care and be safe. Have a GREAT day.
Yo thanks man and also Thankyou Morgan
Link to adapter?
HEY MAN I HAVE A QUESTION : Instead of buying the whole radio. Can I just add a aux cable in the back my 08 crown vic radio ?? I known some ppl who've done that on different models, but I don't know if will work on mine... !! Thank for your reply !!
Appreciate it dude, how old are you? My first car is a 98 crown vic we fixed up so this helped a lot
Excellent Video!
Advanced auto parts had them for $9 lol
@joshuamorehead6124
4 жыл бұрын
Why would you spend $9 and you're gonna do it only once, when you could do what this guy did for free
thank you!!!!!!!!! lots of help!!!!!
the right side don't click , it goes all the way through , I even went to buy the tool ! any ideas ?
Scosche is spelled like Porsche so I think it would be pronounced like Porsche is correctly pronounced, just a guess.
P71 crown vic? Or just the regular civvy one?
Thanks for sharing!
Nice video guy thanks
I have a 2008 ford CVPI with disconnected front speakers, presumably for the police who used them for their radio. I removed the front passenger side kick panel and found 4 wires (2 wired in 2 pairs) labeled RH Speaker LH Speaker. They looked like they were cut, or never stripped and put where they belong. Any idea on how to get them wired up so I have front speakers again?
thanks man, well done!
I messed up the right side with the hangers , left side try to come out but I think I destroyed right side holes now what ?
@FranksShitBoxCollection
8 жыл бұрын
+totljag1 You probably figured it out by now but you could use a prying tool, $1-2 on eBay, and remove the entire assembly and basically force the stereo out of it but you might need some elbow grease for that one.
It worked. Thank u. Radio came right out. Is there a direct radio replacement with a c d player?
Good video dude good job
My right side won't click ? Help
What install kit did you use. Mine has a ton of tabs on it that won't allow it to go in
Tell me y’all got married?
Which mounting kit did you use?
what do the buttons on your door do? i have a 2005p71 but i do not have those 2 buttons. 0.15
Great video.
Thanks, that seems easy.
im poor too my man but you cool tho but do u need to disconnect neg battery before doing this
Gracias broo
I have a 2000 vic is it the same procedure?
@kekun3740
8 жыл бұрын
+cesar peralta 98 to 11 is supposed to be the same. Not sure about the lx, but if you have a p71 it should be.
cool vid. Thanks
Thanks!
Very good my dear
2160p?
I might asth we'll get a sthock radio
🤔..Brilliant!!!
I would be offended, if I knew what that statement meant. You should release a follow up video with your hanger picking a JEW-FRO!
TA TA TADAY JUNIOR!!
@hugozac88
7 жыл бұрын
Tyler Christen lol Billy Madison
2019
Stranger things
Morgan is hot!!!
@GeometryDashAcamar
7 жыл бұрын
lmao this was funny
getto haha
Would a newer radio work on a 93 CV too? I'm looking to upgrade, lol I can't take cassette anymore.
thanks man, well done!
What install kit did you use. Mine has a ton of tabs on it that won't allow it to go in