Materials: 1 piece of square 20 gauge dead soft wire, 15 inches long 1 piece of square 20 gauge dead soft wire, 6 inches long 24 gauge half-round dead-soft wire(just keep it on the spool and use as needed). 18 gauge half-round dead-soft wire, 2 pieces, 4 inches long each 1 cabochon, mine is an oval Aquamarine, about 30mm tall Swanstrom tool set : tinyurl.com/mpbjxpu6 Other tools I recommend: Pliers(Xuron Tweezer Nose): amzn.to/2Vghbyw Wire Cutters(Xuron Micro-Shear): amzn.to/2UcRWg4 Round Nose Pliers(Beadalon Ergo): amzn.to/2U6ee3d My bail making pliers: amzn.to/3z2W1rW (the above are all affiliate Amazon links) All about wire: kzread.info/dash/bejne/pIV82MyLXdCYm5s.html All about tools: kzread.info/dash/bejne/l6Rp0NuTlsjIk9I.html General FAQ video: kzread.info/dash/bejne/g6abq8-BnKWqeZs.html All about buying stones: kzread.info/dash/bejne/g6abq8-BnKWqeZs.html My Website(where I sell my jewelry): oxanacrafts.com Instagram: instagram.com/oxana124 Patreon(where you can support me via donations): www.patreon.com/oxanacrafts Facebook: facebook.com/OxanaCrafts

Love this simple and elegant design. Thanks!❣

Thank you Oxana!!, I love the simplicity of this wrap, the stone is SO beautiful that it needs to be shown and this simple wrap does that.

What a great way to frame and show off a stone. Thanks for sharing.

Oxana you are very talented. This is pretty. ❤❤❤

You are an excellent instructor. I love your tutorials. You make it look possible. Thank you.

@OxanaCrafts

23 күн бұрын

Thank you so much!

Love the vids you are one of my favorite KZreadrs

So beautiful!! Great video & u explain it so wonderfully. Easy to understand. Thanks for sharing yr talent with us. Teaching others to be creative is awesome. Can't Wait to try to make some pendants.

@OxanaCrafts

Ай бұрын

Thanks so much 😊

Wonderful clean design ❤ thanks Oxana!

You have such a talent I make jewelry to but I make nothing like you do like even if I tried my vary beast I even try to follow along with your vids and I can't you are just to good

@imretired6955

Ай бұрын

If you keep practicing you will get better.

Very simply beautiful.

Nice colour

Thank you Oxana. What do you do with the excess wire cuts please?

@OxanaCrafts

Ай бұрын

You can save them and use for little chain links or just to have on hand when you need just a small piece.

I love the crisscross pendant from 6/8/24. Any suggestions for using this design for a smaller stone, possibly in silver? Thank you.

@OxanaCrafts

Ай бұрын

Yes sterling silver can be substituted for the copper in any of my tutorials. If the stone is super tiny it might be tricky. If your stone is at least 3/4 of an inch I think this design should work, I'd use slightly thinner base wires since the stone is smaller, 21 gauge square instead of 20 like I use in this video.

@FairviewSouth-ht2ht

Ай бұрын

@@OxanaCrafts I will give that a try. TX. :)

love your work.! What brand of wire do you use? I can't find everything at rio grande or it is that I don't know what to look for, Half round and square seem to be hard to find.

@OxanaCrafts

Ай бұрын

My wire is from Rio Grande, they typically just have one listing for the square and on the page you select the gauge you want. You can search for square copper soft wire in their search bar and it should come up

Can I use round wire for this as well?

@OxanaCrafts

Ай бұрын

You could possibly make it work with round wire instead of the square. But the half round wire can not be substituted for round in this case, I don't think it would work.

@amandanelson4681

Ай бұрын

@@OxanaCrafts thank you. I’m gonna try this with round wire and use 1/2 hard, half round because it’s what I have …

Oxana, I joined your channel and the member-only videos still wont let me watch.

@OxanaCrafts

Ай бұрын

Only the highest level of membership, called Insider, allows you to watch the videos one week early, before they come out to the general public.

@ourgeorgiasuburbanhomestea6309

Ай бұрын

@@OxanaCrafts Thanks for answering. so it will come out to non-members eventually?

@OxanaCrafts

Ай бұрын

yes they all come out to the general public, it is just a matter of timing, the Insiders can view them 1 week ahead of time.

@ourgeorgiasuburbanhomestea6309

Ай бұрын

@@OxanaCrafts Did you see my idea/question regarding designing a coaster mold that has a juice groove in it? You know the little groove that runs along the margins of a cutting board to keep liquid from rolling onto the counter? I live in a very humid environment and when we have cold drinks the condensation from the glass rolls off of these resin coasters and ruins the wood around where they sit. If you design and make coaster molds with the juice groove, I'd buy them!