Tanner, I am really loving these short, hands on videos. While your videos are always good, I don’t have time to watch hour long videos. The shorter ones are perfect for me.

@MakersGonnaLearn

2 жыл бұрын

So glad you love it!

Varnishing the vinyl before weeding was my favorite. I think this hack will help me a lot. Thank you❤

TIME STAMPS 🥳: Varnishing Vinyl before cutting: 1:33 Using correct mat: 6:56 Tip for Layering Vinyl: 10:33 (AWESOME TIP!!) Letter spacing/welding: 12:37 Measure correctly: 14:11 ** I love your videos!! ** 💜

@MakersGonnaLearn

2 жыл бұрын

Oh my gosh I need to start adding these in every video!

Thank you for all the tips and tricks. I'm new to cricut crafting and I found a lot of your videos very helpful. The one I seen today that I'm going to start using is flipping the mat over to remove the vinyl. Again. Thank you! 💖💖

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

I love the last hack of putting the shape of the project in design space

I finally joined the cricut owners club by buying a cricut maker machine this week. Watching your KZread videos Tanner to learn how to use it.

@MakersGonnaLearn

2 жыл бұрын

Thanks for watching!

I loved the tip on how to layer with glitter vinyl. All the tips are great!

@MakersGonnaLearn

Жыл бұрын

So glad!

Thanks so much for reminding me to burnish the vinyl before cutting. I loved how you showed to use glitter with reg vinyl 😁. Thanks so much!

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

Thanks for the tips! I'm especially grateful for the one about taking cardstock off my mat!

Love the shorter videos! Thank you they fit in my busy schedule.

@MakersGonnaLearn

2 жыл бұрын

Good to know!

I liked the one about welding the letters.

The last tip was so helpful! I’ve never thought about measuring my item and putting it in design space. I will totally start doing this!

@MakersGonnaLearn

2 жыл бұрын

Glad it was helpful!

I never thought to lightly burnish before weeding. Expecting that to be a game changer for me.

The layering one was my favorite! One Issue I've run into as a new Cricut owner is getting small letters to stay on the backing without getting out of place.

@omgxtay972

2 жыл бұрын

YESSS! This one is awesome

Thank you for your video. The one I never thought to use is to measure the item and place in DS. Thanks for the tip.

Probably burnishing before I weed is something I don't always do. Thanks! Nice job Tanner.

Just found your channel and am a cricut newbie!! Thanks for you vids they are so helpful and full of great ideas and tips, I really like the idea of sizing up your object and putting into design space before actually cutting, it is something I have been doing and find it so much more useful and time saving and not to mention less wasting of expensive supplies!

I love the layering tip. Game changer

@MakersGonnaLearn

2 жыл бұрын

Yay!

I have not used the cricut yet. I have been watching videos and loved your video.

Never burnished after cutting but will now seeing the difference.

My favorite was burnishing AFTER cutting BEFORE weeding.

I have been looking for a good way to splice. I am, admittedly, a complete newbie, and I greatly appreciated this video! Thank you!

Never thought of burnishing after cutting. Will have to try this out.

Love it!!!! Thank you so much Tanner I'm very new to design space and you cleared up alot. For me this was very awsome thank you again!!!

@MakersGonnaLearn

2 жыл бұрын

You are so welcome!❤

Thanks! I learned a couple things! Very helpful!

Great tips... Knew of some, specifically flipping over the mat to remove. Really liked the last to help visualize where it will be placed. Thanks.

@MakersGonnaLearn

2 жыл бұрын

Thanks for watching!

Thanks for making videos that I can understand! I think the measuring of your project is a great tip!

Hey Tanner, I really enjoyed the layering tip you gave. That will get rid of the frustration of using plain vinyl over glitter. Thanks for sharing the tip.

@MakersGonnaLearn

2 жыл бұрын

You are welcome!

I enjoyed seeing these hacks. What I didn't see is changing a print and cut to a basic cut. I have been having a time doing it. If you can tell me how lease let me know

I received a cricut Air 2 for Christmas and have been binge watching everything I can thank you!!

Lots of great tips with short clear explanation.thank you. 🦋

@MakersGonnaLearn

2 жыл бұрын

You are welcome!

Welding the letters together

Tanner I loved this video. I have seen tons of how to videos and yours is the best one I've seen. You explain and show how to use an example that is easy to see what is happening. Thank you for helping me understand the supper silly term SLICING. The terms do not fit the craft!

Slice!! Didn’t know about that one!! Thanks.

The slicing hack is amazing! Thank you so much!

@MakersGonnaLearn

2 жыл бұрын

You're so welcome!

Awesome Tips, never knew to burnish before weeding and the tip for layering, great :) Still learning Cricut Design Space. Thanks for sharing.

Yes needed this video! Just one place for some of your great advice!

@MakersGonnaLearn

2 жыл бұрын

Thanks for watching!

Thank you! I struggle with weeding!

@MakersGonnaLearn

Жыл бұрын

Best of luck!

I am so proud of you Tanner! Very good video.

measuring your project is a plus. Great to know! I am a beginner and all of the tips were a thumbs up...

Very informative as always, didn’t know about burnishing before weeding. Thank you!

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

The slice tool to eliminate double layering is my fav

@MakersGonnaLearn

2 жыл бұрын

So glad!

When I weed and don’t burnish it , my project comes up, too! Thanks for the tip!

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

Liked this. The best hack for me is burnishing vinyl after the cut.

@MakersGonnaLearn

2 жыл бұрын

So glad you liked it!

I use the mock up technique!

Definitely the tip when using design space in adding the size/shape of what your applying vinyl to. It really helps so much. I have a question though...so I'm very new to my cricut & I'm about to do my 1st layered htv shirt. It's just regular htv, no glitter. It only has 4 colors but the way I have it now is I contoured the 1st layer to make it solid black, then I have the other layers of colors. Should I slice that out though so it's not layering multiple pieces of vinyl on top of vinyl?

Thank you so much! I'm learning SO much! My favorite is the tip about turning the mat upside down for paper!!! Who knew! Thank you!

@MakersGonnaLearn

2 жыл бұрын

You are so welcome!

Thank you, great tips. Card stock is my worse make, I can now do it better.

@MakersGonnaLearn

Жыл бұрын

Thank you. Glad you liked it.

I love all your knowledge. All the tips.

@MakersGonnaLearn

Жыл бұрын

I appreciate that!

I liked the slice.

I even got a cricit light pad that helps alot

New member here. Really enjoying your videos. Nice tips today. It’s the simplest things we never think about and they’re so helpful.

@MakersGonnaLearn

2 жыл бұрын

Welcome welcome!

Good info about the mats...tyfs, Tanner!

@MakersGonnaLearn

2 жыл бұрын

Any time!

Thank you for great tips.

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

The mat tips. Eg best way to remove card stock from mat 👍

Thanks for the helpful tips!

@MakersGonnaLearn

Жыл бұрын

Happy to help!

Thank you so much for the tip on how to connect the letters!

@MakersGonnaLearn

2 жыл бұрын

You are so welcome!

I don't even own a Cricut (I'm a Silhouette user) but I love watching your videos because I just love your energy 😄

Thank you!!

Great tips and I think varnish is the only.one I have used much.

Great tips…fav tip slice to work with layering glitter etc. thank you

@MakersGonnaLearn

2 жыл бұрын

Thanks for watching!

as always, it was great!! I'm glad you did a card stock one, cause Ive not did it yet

@MakersGonnaLearn

Жыл бұрын

You can do it!

I love them all. Enjoy watching.

@MakersGonnaLearn

2 жыл бұрын

Yay! So glad you enjoyed it!

Which weight cardstock for cutting out for keychain to hang on for gifts? Can I use blue mat for vinyl

The best one for me is the measure one

Using shapes and slicing.

I love that olive drab pencil box. where did you find it?

Im still having issues wirh tiny letters using regular vinyl. I'm trying to make faux mini mini bookstacks. Like I need my letters at at like a quarter inch. I'm about to try it wirh htvs ince I've been having better luck with it

Gonna try to slice! This is always a challenge for me. Thank you Tanner.

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

Fabulous! Thank you❤️🤗

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

Thank you

Great content, Thanks

@MakersGonnaLearn

2 жыл бұрын

Much appreciated!

Great information thank you 😊

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

I totally think you created a new word for texting, Tyler....Y u're. Before you said you had to put the "o" back, I just thought it was a southern thing, and thought it was an adorable way to spell that. 😂

Thanks Tanner, always need a hack tip❤️

@MakersGonnaLearn

2 жыл бұрын

You're welcome!

Great video thank you

@MakersGonnaLearn

2 жыл бұрын

You're so welcome!

Tanner thank you thank you!!! For this great helpful video love all the hacks! God Bless hugs Liz x

@MakersGonnaLearn

Жыл бұрын

Glad it was helpful!😊

@elizabethvallely4044

Жыл бұрын

@@MakersGonnaLearn 😊

Can anyone tell me if I can get a replacement blade guard for my Maker. Mine broke off during a major snafu. It works fine without but I'd like to fix it.

HELP, I just got a Cricut this Christmas and I am learning on the go! I made a couple stickers/decals yesterday and put the transfer tape on them after I cut and weeded them but they are not sticking to the transfer tape so I can’t take the sticker off to place it where I want it ! :(

I always make sure to vernish after cut that's how you loose letters and small things

8:05 I don't know why but when that paper ripped I felt my soul rip💔 lol I've been having this issue with cheaper vinyl the white background gets stuck on the mat. I figured it was too sticky. I'm new im still learning. I would like to thank you . From watching your videos im now able to do HTV. I work at Dunkin and I made myself a sweatshirt for work since we can only wear crew necks. Now everybody wants a hoodie customers and co workers lol.

ive had so many problems with using lighter materials such as cardstock and even patterned paper with the mats. I've tried different mats and materials and everytime it all sticks to the mat after the cut. So frustrating that im doing cutting for paper by hand instead as i have wasted alot of material trying this.If you have any suggestions i would appreciate and try again. thanks

Measuring

Using shapes to create designs!!

Great video - I love all the hacks

@MakersGonnaLearn

2 жыл бұрын

So glad!

Tanner how do I print my large rectangle on my Cricut?

Love being a Member

@MakersGonnaLearn

2 жыл бұрын

So happy to know that!

A friend of mine uses a heating pad on low to mildly heat the vinyl to help weed her project easier, I’ve never tried it, what do you think?

Always love your videos! I have a question tho! I was working on making stocking tags on acrylic tags using the Be Merry cut file (the one with the scroll) but I couldn't figure out how to change the colors from solid black to having red berries and green leaves..... any clues? I'm loving my new yearly membership but would love a video on how to change the colors in a solid color file. Thanks Tanner!

@danagilardi1273

2 жыл бұрын

I haven't been able to figure that out either! What I do is duplicate it.. then say change the entire color to red(for berries) then slice off the leaves.. do the same make one all green then slice off the berries.. and so forth.. then piece them together... not that it's an easy solution but hope it helps you

@brandiehammond

2 жыл бұрын

@@danagilardi1273 that’s a good idea. I’ll have to try this. Iam a newbie still. I have a lot of files that are one layered and wanted some of them to have a pop of different colors., but didn’t know what to do. Thanks for the tip!

@danagilardi1273

2 жыл бұрын

@@brandiehammond im glad I was able to help. If there's anything else I can help you with please don't hesitate to ask!

I wish i knew i needed a whole ink jet printer for my cricut explore air 2!! I don't have one!

Hi dear, thx! Love them all, but especially the last! ( Pencil Box hack ;) )

@MakersGonnaLearn

2 жыл бұрын

Hello friend! So glad you love them!

I'm trying to make hats, and Ive ruined 3 hats!! Ho long do I keep the heat on it, and at what heat setting? Yes I have the cricut hat heater

Don’t use design space…….have two machines but not sure how to begin. I have many cartridges

Where do I find the font barefoot Joanna. I've looked on ds and not found .

The layering tip using the slice option is a great problem solver! Thank you Tanner for these tips.😊

@MakersGonnaLearn

2 жыл бұрын

You're always welcome!

Great explaination! Always nice to join you! Just as an fyi, CC (closed caps) is totally off topic. Almost looked like 18 minutes of some advertisement. Sorry, just didn't notice anyone mentioning it. So glad I watched it again with audio. :) Thanks again!

@MakersGonnaLearn

2 жыл бұрын

So sorry about that!

I had never heard anyone say to burnish your vinyl after it is cut. I think this will solve a lot of my issues. I have one question about cursive text. Is there an easy way to make sure you are keeping all your letters on the same plane when moving them? I always struggle with this. I use a laptop. Thanks Tanner

@zullo3529

2 жыл бұрын

@@BacchatusJade Thanks. I’ll try it. I’ve tried Shift and CTL but it doesn’t seem to work. I may have to go with the rectangle. Thanks again.

Hello from Dallas! Been awhile. How is Rachel?

I love to watch your videos

Can I cancel my design space membership if I join your program?