You can support my work for only €0.99/month Become a channel member here: kzread.info/dron/6hGP2VIz2D_m4ZTpKGmLPA.htmljoin - Early access to new videos - Loyalty badges - Custom Emojis in comments - Member perks on Discord

Watching this made me smile. I’m going to order mine next week

I have done everything you have minus the velocity stack. Plus I swapped the 40T rear sprocket to a 42T to get that low end punch your missing. With all the other mods, the bike doesn’t lose any top end speed by adding just 2 more teeth. But now I can get the front tire off the ground without having to grab a handful of clutch. My bike topped out at 81mph in stock form, and it still tops out at 81mph.

@PatchedBandit

Ай бұрын

Sounds great. Maybe I need to gear mine down too 😊 thanks for the info

Great video man. I have all the same mods but I didn't feel like going through the hassle of installing the snorkel. This makes me wanna do the snorkel mod the way you did it. Enjoy

@PatchedBandit

2 ай бұрын

Right on! Please come back and give us an update if you do it 😄 I was too lazy to do this in so many stages.

@PatchedBandit

2 ай бұрын

Check out my latest post: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

Regardless of whether the work is useless or effective, I appreciate the passion 👌

@PatchedBandit

8 күн бұрын

Difference of 5 seconds off the 30-120 is crazy. The bike is much more fun to ride now. So much so that my big bike doesnr get ridden much anymore 😅 How Fast is it: kzread.info/dash/bejne/Ynickslqgay_Z6Q.html

Nnice! Quality video. It was pleasure to watch even I don't have a CRF 😄

@PatchedBandit

2 ай бұрын

Glad you enjoyed! I was a bit worried about the length but I hope some people get some info from it 😅

@Garage_Perkele

2 ай бұрын

@@PatchedBandit Long and good is better than short and good😄

@PatchedBandit

2 ай бұрын

😂 I don't know anything about either 🤪

Good and detailed video.. bike sounds and looks fast on video compared previous videos. 😂 I need to test your bike at some point

@PatchedBandit

2 ай бұрын

Any time!

Ooòooohhhhhh my goodness!!!! What a nice result you got my friend!

@PatchedBandit

2 ай бұрын

😂 I was a bit too excited 😅 Next week we will see how much does it affect the acceleration times

@mike_mikeff

2 ай бұрын

@@PatchedBandit i can't wait!!!!! By the we're are you from ? I see snow your video ..

@PatchedBandit

2 ай бұрын

Finland. Still snowing here today 👹😭

@mike_mikeff

2 ай бұрын

@@PatchedBandit ooohhhh!!! What a nice place to ride! Here in crete we had 29 Celsius yesterday... so hello Finland!! Honda crf300l al the way and here and there and everywhere!!!

@PatchedBandit

2 ай бұрын

@@mike_mikeff That is hot! I would still rather be riding there 😅

This is turning out to be one of the best CRF300 channels on YT🔥 Loving the content!

@PatchedBandit

2 ай бұрын

Appreciate that! 🙂

Perkele! Now I'm first time ever interested in CRF300L 😀 Maybe I'd prefer a little bit more effective dB killer but otherwise a very tempting video. 👍 Looking forward to the acceleration test!

@PatchedBandit

2 ай бұрын

Yeah I would probably pick an Arrow exhaust now 😅

Ive got all these mods except the air intake trumpet because i didnt want to ruin mine either but ive ordered the metal trumpet and im gonna try copy your install. My bike as is does not have the power at the higher rpm that yours does and i belove that is down to that short intake with the metal weber trumpet. Thank You and your video was also super fun to watch.

@PatchedBandit

2 ай бұрын

Thanks for the comment! Please report back your findings 😁

@carpenter751

Ай бұрын

​@@PatchedBandit I just did that weber trumpet mod and it made a huge diffrene. So i bought the akro pipe and the 550 ecu for 91 octane withe a foam filter and the screen door mode and like you i didnt put the other intake boot because it didnt fit right. It feels like the fuel is now burning completly and im getting everything out of the tune.

Ya buddy welcome to the club! Maverick made it all spicy and paired with the Rally Raid it's just fun as fuck!

@PatchedBandit

2 ай бұрын

Very true. Anyone in doubt can test my bike 😄

Honestly I've got full stage 4 but with a limiting MotoX exhaust and your bike looks to be as quick as mine. Your intake mod is a big step ahead of the CBR conversion. My next step is to turf the MotoX and get a Yoshi.

Excellent info, I like the modification to and use of the stock velocity stack, smart and the route I would probably try. Like you I am not sure I could handle or like the attention I would get with the loud exhaust, maybe when I was 16 I would have thought it was cool. I would be curious how it would run with the stock exhaust. I look forward to your next video.

@PatchedBandit

2 ай бұрын

I'm pretty sure the stock exhaust is a major restriction and 550 performance states that the exhaust swap is the only necessary for this level 1.0 mod. The bike is according to them going to run better with this tune if you do all the same mods as me. I would recommend looking into Yoshimura RS-4 as it would most likely sound much less nasty. I just didn't want to pay the money now.. but I might do that later.

@PatchedBandit

2 ай бұрын

Check out my latest post: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

Nice video! It looks really fun to ride now. I wonder if there are a way to keep the bike silent, and get some low end torque from that bike? Or at least more silent 😄👍

@PatchedBandit

2 ай бұрын

More high end exhaust system would do that I'm sure. Yoshimura RS4 would be my bet if I had no budjet limitations 😅

I wonder if this effects the reliability and fuel economy much? This seems to be the best dual sport bike with this mod that doesn't have performance level service intervals. Very tempting

@PatchedBandit

2 ай бұрын

I don't see how it would negatively affect reliability. One could even argue that the engine tune is now correct and therefore is better for long term reliability. Stock engines with the "euro" and other restrictions tend to run pretty lean. This ECU tune is optimizing the engine to run with the correct mixture. I have a chapter in the description about the fuel consumption from my first longer ride.

Excellent video that looks like a transformed bike . Is possible to do this same conversion to a crf 300 rally ?

@PatchedBandit

17 күн бұрын

Yes. All the same mods seen on this video should fit the Rally version too.

Thank you for showing us some alternatives man! So from my understanding you got these results from the following mods: full exhaust, airbox mod shown in the video and 550 stage 1 ecu? Did you also put the high flow airbox lid or aftermarket filter or I may have missed it? Also, did you notice increase in top speed and maybe bike feeling more comfortable at higher speeds that previously on stock when the engine was struggling?

@PatchedBandit

29 күн бұрын

Still using the stock paper filter. All the Level 1 mods are in the bike. It will affect the highway performance too but at the top speeds wind restistance is going to be limiting tha cabability no matter tune or no tune. Here you can probably get a better understanding on how drastic the difference is: kzread.info/dash/bejne/Ynickslqgay_Z6Q.html

You did what I was thinking with the stock air intake tub. Where did you find that velocity STACK? Great video.

@PatchedBandit

2 ай бұрын

Links in description 😊

@PatchedBandit

2 ай бұрын

Check out my latest post: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

Another great and inspiring vid! Out of funds after the Rally Raid convertion . BTW this really transformed the bike. Yeah, Yoshi are expensive and all but Arrow (also expensive, but EU aprroved) are illegal here in Norway. Yes they are pulling bikes over here and giving fines 😞

@PatchedBandit

2 ай бұрын

That's bad. Yes I understood that arrow sells a fully approved setup with a cat but .. it might be pretty restricting like the stock pipe. This setup might not be great for commuting in town but I tend to mostly ride this offroad.

@Motorep146

2 ай бұрын

I've been really happy with the full Akropovic system on my bike.

@user-se7vt5ow4e

2 ай бұрын

That is the smart thing to do with the CRF. The weakest part of this bike is the suspension. Front and rear. I made the mistake of going with the YSS suspension which doesn’t work well with this bike at all. Especially the fork kit . Lesson learned. I am going to go with the Rally Raid next month. The design of the motor really doesn’t lend in self to any large gains in HP.

@no66

2 ай бұрын

@@user-se7vt5ow4e Very happy with the RR set up and also have the Hydraulic preload adjuster. As for engine mods, these have bee tuned for ages in the cbr300. Anyway, it about improving drivablity. Also, a small gain on a low powered engine is a big gain. :-) Still agree that suspension is the 1st mod. No point in more power if the bike doesnt handle :-)

@Motorep146

2 ай бұрын

@@no66 I installed the Twin Air a/f kit and Akropovic full system before I even rode the bike. On my first dual sport ride last weekend (170 miles) the power wasn't what was lacking! It was definitely the suspension that was holding me back. Overall the ride was comfortable just about everywhere but it was riding so deep in its travel I couldn't get the bike to react when needed. There was one situation where I was coming up on an uphill rut and I wanted to seat bounce off a rock to clear it but the bike couldn't do it. I'll be doing the Ohlins rear shock and Andreani front fork kit since the US headquarters are in my neighborhood.

Great video. Just ordered the velocity stack. Do you see any reason why you couldn’t cut the snorkel in place without removing it, or the airbox, and shoving the new velocity stack in from inside the airbox or do you think too much force is required to get the stack in?

@PatchedBandit

Ай бұрын

Now that I know it works maybe it would be possible. Hard to cut in place though 🤔

Great video, i am going to do same now, where did you get mirrors from Cheers

@PatchedBandit

2 ай бұрын

You should be able to find them using: "PowerMadd 34289 Star Series/Trail Star Handguard Mirror Kit"

Good video! I have my doubts with the modified nozzle. The CBR one would always be flush with the air box but yours would produce more turbulence when inserted into it, right? It would be a mix between images 1 and 4 of the image provided by 550 (10:17)

@PatchedBandit

2 ай бұрын

Even the cb300 part is not flush with the box. Some turbulence inside the box is always to be expected but that would the same with the stock nossle. The long snout is even further from the throttle body and works fine. This mod is nicer than cb300 since it turns parallel wit the airbox as the airbox also turns down at the beginning.

Nice video sir! What can u say about the stage 1.5 and the oem camshafts? Maverick is not that responsive in his messenger.. thanks!

@PatchedBandit

16 күн бұрын

I only did the 1.0 tune so my bike has the stock cams.

Hello I have a question; ?where you get the metal pipe that one you cut in to that original part?

@PatchedBandit

2 ай бұрын

Check video description but here: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

Honda did all of this under-sizing of intake air strictly to meet emission requirements, I know you're doing this one correctly since I've seen it done. I will say that you're cleaner than the other guy but both of you got the job done. If you were to do the 301cc kit I think you'd have to do this intake job but how would the ECU numbers work? I mean, after the big bore the fuel numbers would need to be changed along w/ the air..... but I'm guessing you would not use/need the 550 ECU flash in this case? IDKnow but it just hit me that there's several different things that might offer you an ECU change in numbers & you can't use all of them. I did really digg the suspension video, loved those guys ~ how professional they were ! peace

@PatchedBandit

8 күн бұрын

550 Performance has a different ECU tune for the big bore level of tuning. I would just reflash the ECU to support the big bore.

@user-dv7hb2sc9m

7 күн бұрын

Thank you, I've heard of a handful of these ECU related upgrades but didn't know if it added to the Bike's Brain or simply flashed over the whole system..... now I got it. much appreciated.

Hello @PatchedBandit, dit you also consider replacing the stock airfilter with a TwinAir one (ART. 150609P). I also have the the 550 Stage 1, combined with all the airbox mods and with this foam filter. It provides even more airflow, so the 550 tune will use that extra air for the optimal fuel mix and it provides even more power, especially at midrang en topend, where the extra airflow matters. Just a tip.. :-)

@PatchedBandit

2 ай бұрын

I did consider it but better airflow filters have a downside of not filtering as well. The more airflow the bigger the particles that get through. Filtering effectiveness of paper filters is incredibly good but they do need to be changed pretty often in group ride environments.. I love using prefilters but this airbox lid is not allowing me to do that anymore. I'm probably going to try and figure out a way to mod that airbox lid so that I could install a prefilter to that too. If I can do that I might swap to a performance main filter. But using dual filtering is proabably not gonna lead up to better airflow. Right now I'm willing to suffer a couple % penalty for better filtering capability of the stock paper filter.

@PatchedBandit

2 ай бұрын

I wish twin air would add a box to that filter unit where one could easily swap a prefilter in and out without even pulling the filter out of the airbox. Would be an easy upgrade to that design.

@kloewetebill

2 ай бұрын

@@PatchedBandit , By the way, I like your design of the airboot intake very much. I think I am gonna swap mine (CBR300 boot) to yours. The fit will be much better and the diameter is sufficient for extra airflow (40 mm). Nice piece of engineering!

@airadaimagery692

Ай бұрын

I don’t think I’m taking any risk with K&N. Definitely better air flow.

The louder exhaust is not for me. But the better punch/pick-up, the better low-speed/low-rev without stalling/twitchyness. Hmmh, mouth-watering. 20% faster acceleration would be a lot. Happy rides, Günter/Nürnberg

@PatchedBandit

2 ай бұрын

The sound might get a bit much in longer trips. The Yoshimura RS-4 would most likely be more chill but it's almost 3x the price in EU. I might swap for that later but the tune works great so far 😊

The sound doesn't bother me, but out of curiosity, does Dominator provide an option for db-killer?

@PatchedBandit

2 ай бұрын

Unfortunately no.

Fast question! What is it for socket to the helmetlock? I cant see what it is?

@PatchedBandit

Ай бұрын

Noticed from IG that you found some solution :) Can't remember this myself as I just removed the HL in this install and never put it back. It's somewhere in my storage unit 😁

You should have used the cbr stack and saved yourself the struggle. Another ‘Tuber’ drew a template of the box/stack to make the proper adjustment. You have to ‘clock’ the stack so the expansion chamber flange rotates about 20* up (plug the flange, you don’t need that chamber with the mods) My crf is in the Philippines and exhaust noise isn’t an issue. KTM 500 and 890 in California downright ‘Thunder’ but the sound police are busy eating donuts. CA🇺🇸has county and state off-road parks and federal land is a free-for-all. 25:18

@PatchedBandit

2 ай бұрын

Everyone can do what they want. My mods got me over 5seconds of the 20-75mph time so I'm good with the stock mount that I can trust.

What's the fuel consumption now? Also, how do you plan to pass tehno check with this? I assume just swap the pipe back to stock, pass, put this pipe back on?

@PatchedBandit

2 ай бұрын

No annual checks here. I wrote a chapter in the description about consumption of my first a bit longer ride. It's not noticeably different.

@cooper1101

2 ай бұрын

@@PatchedBandit Ah didn't read the desc :D I'm seriously looking at getting this as a second bike to have some off-road fun, should be a great deal getting this for around 6k eur and doing suspension, exhaust, ecu, airbox mods.

Do you have a link of the velocity flange?

@PatchedBandit

24 күн бұрын

Description

You dont have to drain the tank in order to remove it. Just disconnect the fuel line and electronic wiring and thats it.

@PatchedBandit

2 ай бұрын

I wanted to make sure I won't spill anything to the garage as It's not mine. Good tip for anyone doing this if it doesn't leak.

The length of intake tube matters. My car has electrically adjusted telescopic intake tubes that extend longer in low RPM for better torque and retract shorter for high RPM power. Cutting it short is not without side effect. I'm still searching for lightweight aftermarket exhaust that is not louder than stock exhaust. Riding offroad is illegal essentially everywhere in my country so we need to keep as silent as possible to avoid trouble. I wonder if you are going to replace heavy Pb battery with LiFePo and to remove pointless ABS to reduce weight?

@PatchedBandit

2 ай бұрын

True that there is always side affects on modifying the airboxes but this ECU tune is optimized for the CB300 stack and HF lid so I tend to lean that this is a benefit considering high rpm power production. If I want a fully euro stamped exhaust at some point I'm probably going with Arrow. They even have a midpipe with approved CAT. This dominator is probably one of the louder ones available but also one of the cheaper ones too. I already swapped the battery here: kzread.infoHSNgOZXblik?feature=share I might do the collector box delete later but I'm probably gonna leave the ABS as it's not such a big benefit to remove.

@MichaelShaw206

Ай бұрын

@@PatchedBandit One of the attributes of the CRF 300L is how quiet it is. Is the trade off worth it? From you laughter during the video, I believe you thinks so ;)

@PatchedBandit

Ай бұрын

Well. I might swap the dominator to a quieter optiom later. It is definitely too loud for public roads 😂 but some people love the sound.. I’m gonna get sick of it after a while. Something midway from this and the stock would be great.

Hi. What IS Price for this "kit"? 550 ecu, exhaust Pipe and rubber Pipe inside Air box? BR Pekka

@PatchedBandit

Ай бұрын

Check description and the links to all the products. I don't post pricing in these videos because it varies by country a LOT depending on do you need to import/export stuff etc.

Excellent video where you get the Metal flange for the intake at? Are you going to buy the Twin-Air filter as well?

@PatchedBandit

2 ай бұрын

This SHOULD be the same or close to the same: www.ebay.com/itm/Trumpet-40mm-3-2-Weber-40-DCOE-slide-in-Velocity-Stack-ALLOY-air-horn-ram-pipe-/302330332445?_ul=IL I don't plan to swap the filter now. I just put in a fresh stock paper. If I ride a lot in groups the twin air would be nice but for now It's ok with the stock one.

@mymotosai5036

2 ай бұрын

Hi @patchedbandit, do you think removing the backfire screen from oem filter will make a difference? Worth doing if sticking with oem filter?

@PatchedBandit

2 ай бұрын

I would be very surprised if that would affect the performance much if at all. I went from 16 seconds to 11 seconds doing 30-120kph with the tune already. I might test an aftermarker "high flow" filter later if I can find a good one for it but so far I don't feel that the bike is starving for air.

@mymotosai5036

2 ай бұрын

@PatchedBandit Thanks for responding 👍 I'm looking forward to the aftermarket airfilter test as everybody seems to include the twin air filter change when upgrading the ecu, and 550 Performance also recommends.

@PatchedBandit

2 ай бұрын

Check out my latest post: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

what’s the highest speed you’ve been able to hit?

@PatchedBandit

2 ай бұрын

I’ve never tried the top speed. I have michelin starcross 6 enduro race knobbies on so they are very unstable at top speeds 😅

Perfomance tuning? Pavlin will have you on the cross ;)

@PatchedBandit

2 ай бұрын

True. I Wonder what he would name the bike now 😂 He named it "the wasp" last time if I remember correctly 😁

You should use some Uni-Filter Air Box Vents / Filters UFV-6

@PatchedBandit

2 ай бұрын

They don't fit well under the plastics of the CRF. There is a good video sample of this on YT and they also let water through easier than the frogskin. I might try and modify a prefilter slot on top or under the frogskin later as I would like to use prefilters to extend the life of the main filter or use a high flow main filter with less effective filtering.

@Rust_valley_racing

2 ай бұрын

No they dont lol, You fit them in the Air box door/cover as they sit flush to the cover, been using them for 20 plus years in all my overland and mx/enduro bikes

@PatchedBandit

2 ай бұрын

Im gonna check them out for sure

@Rust_valley_racing

2 ай бұрын

@@PatchedBandit just google " Uni-Filter Air Box Vents / Filters UFV-6"

But the 2024 got already 27 HP? So yours is older?

@PatchedBandit

2 ай бұрын

The dyno chart is wheel HP. Not what the manufacturer papers say. CRF300L has always had the same stock HP. There is no upgrades to the engine so far.

Can this mod be done to the 250??

@PatchedBandit

Күн бұрын

550 performance has separate but similar mods for the 250. Check the website and ask them via e-mail if you are unsure. I believe the airbox mod was much easier on the 250.

exhaust sounds like a fart can

@PatchedBandit

2 ай бұрын

Had to come back and say.. now that you said this that's ALL I can imagine when I ride the thing 👹 It does sound like a wet fart 😂

... The video was great, not too long. 300 Rally owner here in Maryland, USA. I love it. Bought it used with 1944 miles. It had Rally Raid suspension Level 1 front and back plus a LOT of other add ons already. Bark busters, skid plate, tail rack, etc. I have since added the 550 Stage 1 ECU. Opened up the top back of the air box like POMMEY BIKER did here. ... kzread.info/dash/bejne/ppdnr5ZrebvIccY.html Installed the DNA air filter and full Yoshimura RS4. I have the CBR stack but because that is much more involved, I wanted to see how it felt with just the changes already. Yes, it does have more pickup with my "seat of the pants" test rides. . Thought about the metal "trumpet". I'm considering cutting the stock intake like you did (maybe a little shorter) heating it with a heat gun and flaring the end out to be similar to the CBR stack and the metal trumpet. What are your thoughts about that? Also, I want to cut that ridge inside the air box down or completely remove it. Thanks again for the video!! . On a side note about youtube and my channel. Now that I am back into riding, it was my first addiction before fishing, I am asking myself, do I combine my addictions in one yt channel and change the name to, "Bay Boat and Bike Life" or start a totally different channel just for the bike info? I really do not want 2 channels. Jeff

@PatchedBandit

2 ай бұрын

To the first question I would say that heatgun was the first idea to me too but then I read up about it online a bit more and the consensus online is that rubber doesn't really want to be manipulated with heat. It might get very brittle and even shrink from the heat so it's not like modling plastic. I would steer you away from the heatgun idea from what I have read online. Cutting the ridge off can't do any harm. Not sure how much it is affecting the flow though. Considering youtube is a very tough place to give channel advice as combining 2 subjects might be a great way to identify your channel from all the rest of the million motorcycle channels out there. BUT on the other hand usually sticking to signle subject is considered more effective. It's pretty simple in a way that people watching your fishing videos are most likely not all that interested in your motorcycle content and the same in the opposite way. Like I would be watching your moto content but not necessarily all that interested in the fishing. Even though most like fishing it's not content I look on the weekly or even monthly online. As a general rule it's good to find a niche and stick to it and second rule usually is to keep the channel in that niche. It took me a long time to realise that people are not interested in ME.. But the bikes. And I have steered my content a lot in that direction lately. I started this like many others just to make fun videos about things I do. But I post less and less about my daytoday trips and focus on creating more informational content. I'm still gonna do some entertainment too but I know I'm not very good at it. You might be so that's why it's so tough to give this advice.. I don't want to steer you away from a winning combo. Trial and error my friend! 😄

@240LTS

2 ай бұрын

@@PatchedBandit ... Thank you for taking the time to respond. I really appreciate it. As far as the channel(s), I'm not looking to be the one that has a million subscribers or make money with the channel, just like you, willing to share information that may help others or spark an idea to make something better. I have subscribed to almost every channel that post CRF 300 info. Some say that bike is under powered (it's no rocketship) but it is just right for me. Thanks again, Jeff

@PatchedBandit

2 ай бұрын

@@240LTS Having fun is the most important thing for me doing these vids 😊

@PatchedBandit

2 ай бұрын

Check out my latest post: kzread.infoUgkx11mET0fxN7Shcg_yUdPxapYd76IzzJfQ

How much was shipping and customs

@PatchedBandit

2 ай бұрын

In finland it's about 24% on top of the total cost. VAT is easily the biggest cost. Still if you go without the CB300 stack and do this the same Way I did it's pretty affordable. Exhaust is the biggest moneypit and these cheaper ones can be pretty loud.

@suupaltti

2 ай бұрын

@@PatchedBandit Customs is 3,7% VAT is 24% for everthing (including shipping). And at the fall VAT will be 25,5%.

@jimmyvikstrom-pq4bn

2 ай бұрын

Okej where did you get the that metal thing

@PatchedBandit

2 ай бұрын

Check the description

@jimmyvikstrom-pq4bn

2 ай бұрын

👍

Yay, now it has almost 20 hp and sound like an annoying moped.😂

@PatchedBandit

2 ай бұрын

Everyone can pick the exhaust themselves. Real wheel hp is now almost 30 so about +5 from stock.

@shaymtbrider7244

16 күн бұрын

Keep crying

there are only four horsepower! The noisy exhaust seems a lot of power.

@PatchedBandit

18 күн бұрын

5 seconds off the 30-120 time. kzread.info/dash/bejne/Ynickslqgay_Z6Q.html

That's not loud straight pipe it that's loud

Sorry for the finnish language... Sääli että osat tulee rapakon takaa ja joutuu tullaamaan. Eikä sekään yksin, mutta kun tietää miten perhanan kallista sinne päin on kuriirilla lähettää vanha ecu flashattavaksi ja maksaa sitten vielä ne tullit takaisin tullessa niin ei taida enää oikein maksaa vaivaa. :(

@PatchedBandit

2 ай бұрын

Postipaketti sinne oli 55€ tollasessa hardcasessa, kun lähetin. Mutta joo onhan siinä kuluja kerrakseen.

If in a year, your engine blows a piston. Who pays the bill? I've heard it happen 😔

@PatchedBandit

Ай бұрын

1. Let there be no confusion here. This WILL void the bikes warranty fully. 2. These tunes have not been made to the CRF300 so long that anybody would be hearing of the pistons been blown from these engines. 3. This is not a very intrusive tune in that none of the moving parts are modified. The engine will just breathe better as all the restrictive 'environmentally friendly' blocks are taken off the bike. This being said EVERYONE is doing the work to their own bike on their own responsibility! Only time will tell how the longevity is affected. I am willing to take the risk but I fully understand that this is not for everyone and if reliability is the absolute no.1 thing for any of you I definitely don't recommend doing anything to the stock bike. I am willing to be the test dummy and report back how life is with the tuned Honda. If I blow the engine on mine I will make a video for sure.

@airadaimagery692

Ай бұрын

No you haven’t.

Nice video but too loud for my taste.

@PatchedBandit

2 ай бұрын

Dominators are loud. Many alternatives available though. Arrow or Yoshi would most likely produce the same performance.

Terrible noise, I definitely couldn't put up with that exhaust.

@PatchedBandit

2 ай бұрын

Lots of options available. Yoshi is probably quieter.

@ChristianSuarez-tw6ij

2 ай бұрын

Why are you riding if not to hear the bike?????? You want quiet get a car or a tricycle???

@fatpigeonadventurerider2118

2 ай бұрын

@@ChristianSuarez-tw6ij I've had plenty of straight through pipes and cans, the crf300 is not a nice loud, it's in my opinion obnoxious unlike my bandit 1200 or gsxr

@Backwoodsman748-yj9rg

Ай бұрын

Keeps animals off the road

Bro, that’s it? 😢

@PatchedBandit

2 ай бұрын

Loved it before and love it even more after ❤

These are popular bikes around the world. Thus you have a massive aftermarket pimping endless parts to "enhance" your CRF. Oh, what do those pesky fluid dynamics engineers at Honda know about airboxes? Time to lash on an opened airbox so the bike can breathe "better." OK, git 'er dun, Jethro!

@PatchedBandit

23 күн бұрын

The same engineer needs to conform to euro 4 and 5 requlations and cant make the bike as good as it can be. This is now as good as it can. 5 seconds off the 30-120 time thank ya very much 😎

Sounds good man. Looks like it is a good upgrade. Now how much MPG (km/l) did you lose?

@PatchedBandit

2 ай бұрын

Not noticeable. Check description 🫡

hahaha 28:00