Hi Gals and Guys, this tutorial will show you how to get started creating your own Presets in the awesome Hotone Ampero II Stomp. I will be showing you how to create a single amp rig, a dual amp rig, how to create a Wet-Dry rig and how to use external FX. Enjoy and have an amazing day!!!

Great job, Jay. Very instructive and awesome tones out of it.

great tutorial! loved.subscribed

Excellent Demo! So helpful. Thank you!

Thanks, it's hard to find such clear and understandable practical explanation like this one. Most of videos contains just demonstration of built-in presets, most of web-links are just offers to buy :) The only thing is missing here is explanation of re-amping, but i've already seen it in your another video, so thank you again :) PS: just recieved my ampero 2 stomp and it's awesome with it's routing abilities

@jayguitar

2 жыл бұрын

You're welcome 😊 Glad it helped. And glad you're enjoying the Ampero II! Its a pretty awesome unit. Have an amazing day!

very cool, thanks!

Seen like this it is easier than I thought, yes, then you have to dedicate hours to find that personal sound !!! 🤜🏻🤛🏻. I really liked the last part Wet Dry preset

@jayguitar

2 жыл бұрын

Hey Jordi, yes very very easy to get going with this one 😊 Great little unit! Have an amazing day!

Great demo, I like the aesthetics of the unit for using at home as a recording interface - especially in white. Will be interesting to gauge how people compare this to L6 pod go / stomp. Hopefully the pricing will be good 👍

@jayguitar

2 жыл бұрын

Glad you enjoyed it - I have a full demo of sound on my channel as well so check that out also. Price is $499 (€499 or £499). Have an amazing day!

@MrFreed75

2 жыл бұрын

It's 499 + taxes. Mine costs me 568€ (458€+110€ taxes)

Hi! Jay! Love the sound you dialed up , i was wondering what the diference is between the preamp slot and the amp slot

It’s so intuitive to use

PURE GOLD!

Great presentation! My only question is, this paralel amp use is possible only when you use it as interface or can be used live as well?! Thx

Jay in stomp mode can you assign any effect to the 3 footswitches or is the furthest right footswitch always Tap/Mode switcher?

Great vids mate, just subscribed and bought an ampero 2

@jayguitar

2 жыл бұрын

Thanks Scott! Great that you got one. I’m really enjoying using mine. Have an awesome day.

Thank you❤

@jayguitar

Ай бұрын

You're very welcome. Have an awesome day Jack.

Great review does it have enough DSP to stack 2 delays and 2 reverbs for exemple ? I want to know if I can experiment ambient sounds with this unit.

@jayguitar

2 жыл бұрын

Hey dude, great Q! Depends on the reverbs and delays - sometimes I do find that the DSP runs out if I go for lets say the tape delay and then stack another one on and then two really heavy reverbs. But I have set it up with dual reverbs and delays so it is possible 😊 🙏 Have an amazing day!

HI! Is there a lag or cut in the sound when changing presets? This is something that really bothers me, and it seems to be an issue with HX Stomp. I wanted to know about trails/spillover but you already answered below. Thanks! IF i got one would be to build a flyrig with a controller, EXP and a couple analog pedals (dirt and/or comp). Also to study/record straight in my pc. Any coments?

Great video Jay. How is patch changing? Audible drop out?

@jayguitar

2 жыл бұрын

Thanks! Glad you enjoyed it. Patch changes are super fast. I haven’t detected any drop outs or delays. They seem to be pretty seamless. Have an awesome day.

@Sutch66

2 жыл бұрын

@@jayguitar thanks...subbed

Hi Jay, Happy New Year! I found this video super helpful. A few quick questions, if you don’t mind? Curious to know if you’ve been using any global EQ tweaks regularly, or just rolling off lows and highs on the cab like you did here? Do you find any of the celestion IRs replace a cab in any of your presets? I’ve noticed they’re quite resource heavy and a few folk online have commented that cab upgrades in Ampero II mean they’re good enough to use instead of IRs. Lastly, are there any scenarios where you’d use a pre-amp into an amp into a cab? Or would it just be either or with pre-amp and amp? I appreciate your time and your really detailed videos. Would be great to see a video on building a dual clean amp preset sometime, perhaps with multiple delays and reverbs.

@jayguitar

2 жыл бұрын

Hey Daniel, great Qs - I did do a global EQ change - it is shown on my Ampero II Full Review video if you'd like to check that out. I rolled off some of the high end and boosted some mids. I ended up using the Hotone Cabs most of the time - they have really upped their game with those. The Celestion IRs are fantastic but more tone shaping options with the mic selections, placement, etc with the Hotone cabs. There probably are scenarios where the pre-amp can be used into an amp - I don't really have the need to do that as I have a pretty healthy collection of tubes amps - but if I didn't have, lets say, an SLO, I could feed the SLO preamp into the FX return of one of my other amps. Hope that helps and have an awesome day 😊

@danielgray5644

2 жыл бұрын

@@jayguitar Thanks so much for the detailed response, Jay. I really appreciate it and your content. Take care.

Hey Jay! Awesome video! Was really looking forward to this and now looking forward to your next tutorial for the Ampero 2 Stomp. I have a question related to this. Is it possible to turn off the amp/cab sim just for a specific output. I want to only use the effects going to my guitar amp via 4 cable method and have another output with amp/cab sim going to the Front of House, etc.? I know this can be done by splitting the signal before the amp and cab but I want to still be able to use the same delay, reverb, etc. after on the other signal without using up the available blocks or DSP. I want an "Amp Out" similar to the one in POD Go. Is this possible?

@HotoneAudio

2 жыл бұрын

For this advanced routing we suggest you to download and check the manual from www.hotoneaudio.com since it's very complete and will show you all the possibilities. In case you're not a "manual person" you are always welcome to contact our tech team at service@hotoneaudio.com

@jayguitar

2 жыл бұрын

Really interesting Q! I have been scratching my head about this one for a few days 😊 There isn't a dedicated amp out but with the parallel mode I guess you could set up the same effects in the second chain and have them running into the amp by setting up the input and output on the second loop to the FX loop send and return on the Ampero 2. Have an amazing day!

SUPER !!! :)))

Whats up with the DSP limitations??.. really disappointing to hear that it doesn't even have enough hardware headroom to utilize it's software capabilities.

@jayguitar

2 жыл бұрын

Hey Dave, yeah that sometimes happens - the amp and effects models on the Ampero 2 are much higher definition so they take up a lot more processing power. Maybe Hotone will optimize this in the future so that more can be loaded up. I came across it a couple of times but not really enough to stop me using the unit 😊 Have an amazing day!

Dang Jay I brought two of these ....I bet there price will go up guys..

@jayguitar

2 жыл бұрын

Wow! Two of them! Very cool 😊 Enjoy! Have an amazing day.

@IshredGuitar

3 ай бұрын

They've actually gone down to $399!

now yes, because without a tutorial it seems complicated

Jay Could you make some presets like early VH and Warren DeMartini Thanks David Stringer

This video was very helpful jay. I have an Ampero one and was thinking If the links you provided for cab sims can it be download on the Ampero one??

@jayguitar

2 жыл бұрын

Hey dude, I have tried my own IRs and they don't work in the way I would like them to so I'm working on tweaking them and creating a specific IR pack for the Ampero 😊 🙏 Hope that helps! Have an amazing day!

Can you run the amp block without the preamp section and just the power amp?

@jayguitar

26 күн бұрын

Yes that’s possible. There is a dedicated power amp block that you can use on the unit. Hope that helps. Have an amazing day!

Simple question. Im assuming you can set presets 1,2,&3. Is there true bypass on/off for each preset?

@jayguitar

11 ай бұрын

Hi there, yes correct about presets - no true bypass on amp modellers as the signal path is inside the hardware far too complicated to accomadate that. Have an awesome day.

Have you encountered DSP limitation while building signal chains ?….

Does the delay and reverb spillover when presets change?

@jayguitar

2 жыл бұрын

Hey Roy, yes the delays and reverbs can be set up with trails so that they spill over when you change presets. Have a great day.

@roychan2160

2 жыл бұрын

@@jayguitar Thanks bro. You have a great day too!

Hi, if you want to go from clean to distortion and you want to a fender for the clean and say Soldano fro rhythm how would you set the signal park up. Does it need to be split? Thanks

@jayguitar

Жыл бұрын

Hey dude, great Q! probably the best way to set it up is as presets for clean, crunch and lead, then switch between then with the footswitches or via an external midi controller. That way you can set up the full amp and effects chain and also the volume levels so that there is a smooth switch between the sounds and a volume boost when you select the lead channel. Hope that helps. Have an awesome day.

@gazzaduce3424

Жыл бұрын

@@jayguitar thanks. Doing it that way though will there not be a delay with changing of the patches through the footswitch

@jayguitar

Жыл бұрын

@@gazzaduce3424 not necessarily as you can activate the delay and reverb trails on each patch which will allow the unit to carry on the delays and reverbs of what you're playing when you change patches or turn the effect on and off 😊

Very Nice video!!! Just one question, i

@fvitetta

2 жыл бұрын

In the patch mode if I press the "Current Patch" footswitch the unit enters in "bypass mode" , there is any way to avoid to enter in bypass mode?

@jayguitar

2 жыл бұрын

Hey dude, thats a good Q - I don't know myself. It would be worth emailing the support guys at Hotone about this as they will know for sure 😊 🙏 Have an amazing day!

Is there a way to have an output w Cab and another output w/out to be able to run It into a power amp w real cab? Thanks

@jayguitar

2 жыл бұрын

Hey dude, great Q! yes there is a way - you can split the signal after the amp and before the cab by placing the node there (the Y split method) and then set output B to FX send - connect fx send to a power amp for the amp without cab (you could even insert effect, kinda emulating an fx loop), and then the normal outputs from the Ampero will still have the cab sound which can be sent to front of house. Hope that helps. Have an awesome day!

@MrFreed75

2 жыл бұрын

Thanks Jay! You rock man! 🤘

@MrFreed75

2 жыл бұрын

The downside Is that i can't put the node in the "b chain" so i can use only 5 blocks. Hope they fix becuse in this case i still prefer Ampero 1. Rockin'! 🤘

"still sounds like a clean guitar" ah yes, but we're waiting :)

Old UI was much better. Why did they remove pedal and amp full icons

thanks great job ... sounds terrible G O O D !