Niiiiice. Thanks. Raptor is amazing :)

The laser scanning mode and tracking on the Raptor looks very easy to use, the results for something so shiny are great, even if it wasn't shiny, very good.

Amazing good comparision video! Would like to see more such videos! :-)

When you look at the ring end of the spanner, the raptor looks incredibly good, compared to the Otter. I would like to scan the inlet/outlet ports on engine cylinder heads. I’d love to see you scan the internal space on something tubular, to see how deep down the tube the laser can scan. Food for thought 😑 🇦🇺🤜🏼🤛🏼😎🍀☮️ Thanks again

@Payo-TensileCreator

12 күн бұрын

It can scan the bottom and some siding of 6mm wide 10mm deep groove. The edge of the holes will block the light path.

can you tell us about the processing step and specially about the markers, how you remove them there is any command for this or automatically removes them ?also with laser scan mode is necessary for the markers or without them there is no tracking point. thanks a lot

@Payo-TensileCreator

11 күн бұрын

Raptor in Blue laser will only work if it sees markers (> 4 points) but it this video, I didn't apply markers directly on the object. I put targets around the object instead. What I did is I manually select and delete the surrounded target.

Thank you for your video. Don't you think that if the shiny wrench was coated with a matte spray, the Otter scan quality would be better?

@volcomx14

15 күн бұрын

Probably but cost money 💰 think long term in this economy.

@Payo-TensileCreator

15 күн бұрын

Yes, you're right. When I scan white remote control. Otter gives more point cloud than Raptor in the same resolution setting (0.1mm). But spraying (I usually use Magnaflux SKD-S2) will thicken and cover the emboss text. I can try and put that in a video.

Where can I buy the tags you use in the video?

@Payo-TensileCreator

13 күн бұрын

You mean the reflective marker sticker?

@k3nny674

13 күн бұрын

@@Payo-TensileCreator pyramids with markers on them

@Payo-TensileCreator

13 күн бұрын

@@k3nny674 Pyramids are 3D printed, STL links are in the description

Very good videos. Thank you for pc comparison also. For otter fps. It has given best possible overview of these two scanners. Could you scan something that has cavities. For example my einstar had problems with bolt holes under 5mm diameter. Also it did not have great depth. Meaning that when the object had lets say 50mm cavities inside or has like very landscaped shape then it had problems to see into lower parts. Giving me a model with lost data in cavities. That would be interesting video to see. Also you should compare otter with texture mode to raptor with marker mode. It seems to me that otter has little bit problems seeing markers.

@Payo-TensileCreator

16 күн бұрын

Otter in Small/Medium mode, you can't adjust marker brightness and object surface color will have effect on marker. But in Large mode, you can adjust brightness of marker and object separately. That's why Otter doesn't do well in small/medium - marker mode.

Please scan something at 0.02 mm and show the scan quality at that level for the Raptor.

@Payo-TensileCreator

15 күн бұрын

0.02 mm is advertised accuracy for position of point cloud in space. 0.1mm resolution gives best detail this scanner can give as I have tested it many times. In 1x1 mm there will be maximum 100 points (depend on surface difficulty) calculated from structure light. It's not direct measurement as in LiDAR scanner. If I set it to 0.05 resolution there will be maximum 400 points in one sq.mm and those points are interpolated and not measured by scanner, and this will put more load to software that it's being export to.

why there are some markers floating on the air ??... the software create this error ?? and still working ok ?

@Payo-TensileCreator

14 күн бұрын

You mean in the view port while scanning? it's not floating, it's kind of see through.

can you show the scanner raptor calibration process?

@Payo-TensileCreator

14 күн бұрын

Yes, when it's due for calibration. I'll record a video about it.