Okay that glass door right off the bat 🤘🤘🤘 looking really impressive!!

@user-hear4popcorn

Ай бұрын

Dude, you are famous if nothing else for that. LOL

@WhoKnowsWho2

Ай бұрын

They need to ship you a metal door 😅

@TheRealSamPrentice

Ай бұрын

well i did ask!!!

@ChromakeyDreamcoat

Ай бұрын

you will never hear the end of this joke lol

@SkateSoup

Ай бұрын

Someone needs to hurry up and invent the Star Trek transparent aluminum to have a truly Jessy-proof door that will still let you see your prints. 💜

LOL Uncle Jessy breaking that door , his face is still hilarious no matter how many times Ive seen it.

@TheRealSamPrentice

Ай бұрын

When I’m feeling depressed, I just watch that video

@ANILDILARE

Ай бұрын

The 😮😮❤❤ Q3qqqqq❤a​@@TheRealSamPrentice

Poor Uncle Jessy will NEVER hear the end of the door joke lmao

Sorry, had to pause the video to make this comment. But the way you closed the door is not going to shatter it. What shattered the door was when it swung outward and hinges applied a lot of pressure to the glass in a small area, that’s what shattered it. Closing it hard so that pressure is spread out across the sides of the glass isn’t going to break it as easily as two hinges in a small area. I’d be more impressed if you tipped the printer on the side like Uncle Jessie did and it didn’t break. Now, on to watching the rest of the video.

@TheRealSamPrentice

Ай бұрын

Well let’s get that footage recorded today then

@fireman1776

Ай бұрын

How much and when will it be available?

@CaptainFettCosplay

Ай бұрын

​@@fireman1776did you even watch the video?

@WeBe3Dprinting

Ай бұрын

I'm glad they responded here because I was thinking the same thing except that it was a bit shady that in order to test if they fixed the problem of the door breaking when it's opened to hard.... they close the door hard. Seeing his response let's me believe he just overlooked that detail instead of trying to hide it.

@matthewgould9391

Ай бұрын

take care of your printer and you’ll never have to worry about it.

Missed opportunity to do 5 filaments on the unit, would fit the bigger printer better too

@rostislavzlatnik8091

Ай бұрын

this system is also made for K1 series, that's why

@Fenweekoh

20 күн бұрын

need to wait for bambu to come up with one first before they can copy it lmao

@kennethdavis4982

17 күн бұрын

Definitely looks like there would have been just enough space for fifth roll up there, would have been sweeter with that fifth roll.

@oscarmayorga7461

6 күн бұрын

4 is like a sacred number in design

Ok Creality has my attention again. The heated chamber and the 350mm size kind of kills anything else out.

@thelees1000

Ай бұрын

totally agree - size of this is amazing

@CaptainFettCosplay

Ай бұрын

It doesn't matter how big if it's buggy and breaks down and doesn't print well, then what's the point?

@Vinz3ntR

Ай бұрын

​@@CaptainFettCosplaybecause Creality is more than 10 years in the game because their printers break down all the time?

@CaptainFettCosplay

Ай бұрын

@@Vinz3ntR their time in the game is irrelevant. Their quality control is terrible and their machines always have issues. Do you not remember the k1 mess? This type of machine is not supposed to be like an Ender or a CR-10 hobbyist machine for tinkering. It's supposed to challenge Bambu and just work. The K1 didn't. The K1 Max didn't either.

@sabahoudini

Ай бұрын

@@CaptainFettCosplay Sure thing but if you have experienced printers with heated chambers you know that a printer without one is like a printer without a heated bed was in 2015. You wouldn't buy one. Buying a printer without a heated chamber will soon be like buying a horse back when cars were becoming mainstream.

Hi Sam, on the live feed you just said that the new kit could be pre-ordered now, but there's nothing on the UK Creality site yet. Do you have a working link to the preorder pages, or can you tell us when there will be one?

Great job, Sam! Really looking forward to seeing more on this.

@TheRealSamPrentice

Ай бұрын

Thank you !

User experience - that is the thing to be the most focused!

Great update, thanks for sharing and keeping us up to date on exciting new tech!

Such innovation, much wow. That CMS is definitely something new and different that no one has done before

@Momofatts1

Ай бұрын

They say imitation is the greatest form of flattery.

@mariospanayiotou6644

Ай бұрын

I mean its creality what do you expect? Their current corexy are copied from bambu down to the name, the even added the “c” for carbon on their latest one which should’ve stood for “copy”. The hotend of this one looks different though with no fan in the front so lets see if it’s something they came up with or they managed to copy someone before they even released it

@aracon9721

Ай бұрын

I almost missed the irony tags

With the rfid, is that going to be interchangeable or is it going to be that it's their filament only?

45kg? thats a chunky boi Since this is running klipper, on paper the CFS SHOULD work with pretty much any other printer running klipper right? Would be interesting if it does cus that means it may be a viable stand alone item.

@TheRealSamPrentice

Ай бұрын

Watch this space ;)

@b3nny90

Ай бұрын

This is my curious question too.

@boitmecklyn4995

Ай бұрын

apparently there's an upgrade kit coming for the K1/K1 Max to use the CFS.

@ZappyOh

Ай бұрын

@@boitmecklyn4995 ... where did you get that info?

@TheRealSamPrentice

Ай бұрын

It was on the live stream yesterday

How’s the print quality compared to bambu? I had a k1 for a short time and loved it but it had screen issues so I returned it and bought a bambu p1s. The print quality on bambu is just a little better. Curious how this k2 stacks up.

I been waiting for this since end of last year when I first heard about it, great quick review, excited, need to make a built in file for a poop basket 🤔

Looks awesome love the build size. Just purchased A p1s and ams but it was a bit pricey due to not much Supply in NZ. Creativity has a bigger Market in NZ so glad to see this unit coming soon :) (went with the bambu cos i needed multi color)

this printer seems to be my next step after I learn more about 3d printing. Just had the A1 mini for less than a week and I'm blown away, I definitely want a large printer next and having multicolor and enclosed seems to be great.

@SNESChalmers147

Ай бұрын

Wait and see what Bambu's offering is, the X2 Carbon is coming this year. Creality has a lot to prove with the K2 Plus before I would consider it over Bambu Lab

@xConundrumx

Ай бұрын

@@SNESChalmers147I would have to agree. Used Creality a fair bit but honestly Bambulabs is setting a damn high bar.

@thenextension9160

Ай бұрын

@@SNESChalmers147yes I agree. This looks good and I’m glad they are getting it out the door but I will wait to see if Bambu has a response.

@polla2256

Ай бұрын

​@@SNESChalmers147any idea on timescales. I'm about to pull the plug on Bambu (first ever printer). Will the next one be a generational leap ?

Looking Fantastic Sam. Looks Really Polished

@TheRealSamPrentice

Ай бұрын

Thanks!

The chamber heater along with many of the quality of life improvement features makes this product look very promising. Just as i was giving up on Creality... Qidi and Bambu need to step up once this comes out.

@rp101aquatics6

Ай бұрын

Bambu Labs x1e has a heated chamber as well. Im thinking creality is gonna end up lacking on some key elements to price this low which will decrease the overall quality.

@LilApe

Ай бұрын

@@rp101aquatics6 lol X1E is $2500 and a rip off. RIP bambu lab

@rp101aquatics6

Ай бұрын

@@LilApe you can't say rip as if Bambu can't release their own advancements lol

@LilApe

Ай бұрын

@@rp101aquatics6 Rip bambu lab.

Its appearance looks good. The main thing I would love to see improved is the user experience. Auto calibration for filaments. Less ways for prints to fail for those not as experienced in printing. Plug and play basically.

Very much looking forward to this machine. Using my X1 Carbon with the AMS is great but size has been a limitation for some designs I want to print in multiple filaments. This will be great to use and likely more in line for cost for myself and others.

@ljohnson9440

Ай бұрын

Bambu will come out with a larger unit,watch.

Hi, when it will to go to market? Ordering 2 K1 Max in 1 month, wondering if i should hold off.

Is it multi-material or just multi-colour? Aycubic announced a similar multi-filament unit but their's looks like it only does multi-colour. Need to be able to mix and match filaments for soluble supports etc.

It all looks good, let's hope that Creality has fixed VFAs and other issues of the K1/Max with the K2.

@214ES

Ай бұрын

It was fixed with the k1c by using smaller gears

@Reds3DPrinting

Ай бұрын

@@214ES Smaller gears and bigger rods too I believe

@214ES

Ай бұрын

@@Reds3DPrintingthe also used smaller motors for some reason. you can get the gears for the k1 for like $9.

This is a great first look, Sam. I really like the temperature and humidity readout in the CFS. Given the continued issues I'm having with my K1 Max, though, I'm reserving judgement and will keep a skeptical eye on this.

@JamesYoneda

Ай бұрын

What kind of issues were you having with that one? I've seen lots of good and bad experiences there

Very interesting. Lot’s of stuff to look forward to. Quite a missed opportunity to not include a heater/dryer into the material system. Maybe it’s not too late?

@TheRealSamPrentice

Ай бұрын

I know right!!!

@dmax9324

Ай бұрын

That would put this over the top for many. It would certainly be worth extra cost to consumers to not have to buy a separate filament drying system.

@3D_Printing

Ай бұрын

I heard it has an Active heater chamber

@ecor1987

Ай бұрын

Bump this comment

Cant wait to see some reviews and testing . Loving my K1 Max

Are you uploading any more detailed videos on this printer? I am really interested to some more details and test prints. First layer, ringing effect or some other calibration tests would help everyone understand the capabilities of the printer.

Great info , thanks Sam

Is there any word on whether the multi-colour system will also be available for the k1 series?

@Reds3DPrinting

Ай бұрын

yes, Creality said it would work with the current K and v3 Series

Do you know if it has bed adjustment knobs underneath the bed similar to their older printers?

@TheRealSamPrentice

Ай бұрын

yes but not like other printers.

Nice! Can’t wait to do some side by side comparisons. 😊

@TheRealSamPrentice

Ай бұрын

Can't wait!

at 0:53 you point your finger at a DC input. Should be 24V. Is the CFS powered by the printer? If so, and if that applies to another 3 CMS, why should a DC input be installed there if you cannot operate the unit "without a printer"? In my opinion, this could mean that the CMS can heat up after all and couldn't there also be a humidity control? Or is that the feed for the bypass filament? Doesn't look like it to me, but then where is the feed? at 3:02 I recognize a humidity symbol on the touch display to the right below the representation of the 1D spool. What setting options come up when you press it?

There’s another printer to add to my shopping list, loving the improvements and the 350x350x350 build area 🤩❤️‍🔥

Is the 640mm height inclusive of the cms unit?

Nice, thanks for the review. I do wish the CMS is backwards compatible with the K1 series.

@jnschannel2551

Ай бұрын

Creality's motto: "A step forward, not looking back, at your expense, Creality!" DONT BUY THIS SHIT, been using creality and switched to bambu lab A1 mini. no regrets.

@mackinsvii9022

Ай бұрын

It is. They're releasing kits for the rest of the K1 series.

Any idea if the K2 will have the same belt drive gears as the K1C?

Prime tower, its not a purge tower, its used for priming the nozzle

@TheTurbinator

Ай бұрын

Well if he knew anything about 3D printers, he wouldn't be shilling for creality.

Will multicolor support will be for K1 MAx as well ?

Will the multicolor work on the k1 series?

Still have the lidar? They get rid of the nozzle cooling and only use the aux fans?

@XHolyPuffX

Ай бұрын

Only having aux fans on both sides is a good thing. That reduces weight in the toolhead which will help with input shaper results. I'd be worried about the noise levels though

Looks Awesome, I wish I could afford one...... My Ender3V2 drives me crazy, time to get a new one.

@dylanfoster9243

Ай бұрын

Stuck with my Ender 3 V1 for a while, finally bought a Bambu Lab P1S, Ender 3 became a paper weight

will there be an attachment for the k1 max for multi color printing? or only the k2?

@TheRealSamPrentice

Ай бұрын

Yep there will be

Holy Crap amazing. Sam again you hit it out of the park

@3DPUK-TECH-CHANNEL

Ай бұрын

He has yes as always ❤

@tooby77

Ай бұрын

I see u in lives, i see u here, i see u everywere

When will be able to preorder the k2?

Sam, if you have any pull with the engineers, can you suggest to them to add a threaded insert hole pattern (or at least clear holes to add threaded inserts) for the poop chute so a printed bin or chute can be affixed to the back without modification or removal to the rear plate

@TheRealSamPrentice

Ай бұрын

I’ve had a chat with them today there are things I’d change like the usb and the position of the shoot. I’d like to see it at the front

@IcanCwhatUsay

Ай бұрын

@@TheRealSamPrentice While I agree with the USB location not being ideal, that's a lot easier to change with a ribbon cable or something internal than the location of a the chute. Multiple assemblies would be affected including software to move that chute location. And honestly, the chute location is fine IMO, just needs an attachment point for a printable bin or longer wrap around chute.

I will be ordering this Sam. I think Creality has taken their time with this. Awesome video as usual

Will the ams system backward compatible with K1 Max? Hate having to buy another printer since I just bough this one.

@timothyhackett7372

Ай бұрын

yes it will

hey sam, great job with the 10th event today. congrats

@TheRealSamPrentice

Ай бұрын

Hey, thanks!

Man I’m glad I waited to buy a new printer…almost pulled the trigger on the ARCO from Phrozen and this looks way more polished

Outstanding job on 10yr hosting ! Watched it all. I think they said CFS when available will have a retrofit kit to use on K and V3 series. Can you confirm and maybe share some pricing? No price mentioned for K2 Plus or CFS during the live 10YR.

Good to see a decent bed size. Been looking at Bambu but bed size has been the issue for me. This looks like the go to printer.

I literally just got a K1C 2 weeks ago, is the multi filament system going to be available for the K1C?

@GNexYde

Ай бұрын

man i am so pissed rn.... i am thinking about getting a refund and buying the k2...

@cybergnetwork588

Ай бұрын

Where is the poop gonna go?

looks good love the reference to uncle jessy look forward to seeing his and frank built reviews

I like how they went large with 350mm3 build plate.

Is the hot end all metal? Are there hardened nozzles? How difficult is it to change nozzles?

@timothyhackett7372

Ай бұрын

if its anything like the k1 you'll have to wait till micro Swiss comes out with a hardened upgrade

So on the FB live stream a post said prices will be out at the end of July. So the current models have been reduced and I’m sure a sell off is happening to make room. The multi color system compatibility for the K1 series seems like a poop shoot will need to be added?

Does it have a heated enclosure?

...and now... I'm having buyer's remorse with regards to having purchased a K1, several months after release and still with all sorts of problems plaguing it. This machine does look good. It'll be interesting to know what the price for it all will be and what the actual user experience outside of the marketing office/Engineering Lab will be like. 👍👍

Great video, is the multicolor system compatible with K1 and K1 Max??

@Makerboy.Projects

Ай бұрын

Yup with upgrade

@3DG33kSquad

Ай бұрын

@@Makerboy.Projects great thx for answering

Very interesting! Does the CMS have actively heated drying? Or is it just a monitor for temperature and humidity ?

@glovercarvalho1930

Ай бұрын

Just a monitor, no drying unfortunately.

I now have, in addition to my new K1C, and K1 Max, I have about 5 more bed slingers that I am either going to donate to family and friends. All of them are out of warranty, so I’m going to update them with wi fi, on at least 3 of them, like a Tronxy XY-3, a Mingda Rock 3, a Voxelab Aquila,Mingda D2, and a Creality Ender 3, that I am wanting to upgrade to a Ender Extender 400. I would like to test out the new K2, and see what it is like, when it is released. I emailed Creality on it, but I haven’t received any response back yet.

More interested in the CFS + K1 max upgrade kit.

@TheRealSamPrentice

Ай бұрын

I’m with you there

does anyone know when this will be released? (Both the K2 and the CFS thing)

@TheRealSamPrentice

20 күн бұрын

They are saying July, but that’s optimistic

Came for the k2 plus stayed for the cleaning lady! :) heh

@TheRealSamPrentice

Ай бұрын

Yay! Thank you!

@Reds3DPrinting

Ай бұрын

@@TheRealSamPrentice I'm so intrigued by that dual Y stepper motor v3! I hope you cover it before leaving china! Ill have to really step up my game if I wanna get my hands on one to race it against the v3 and k1c >:)

@TheRealSamPrentice

Ай бұрын

It’s in the works

wait so is the CFS not usable with the K1 line?

merci pour cette review , belle machine , hâte d'en voir plus , merci ...........

hands free auto bed leveling with lidar is a must.. hopefuly the will change the design

@TheRealSamPrentice

Ай бұрын

Interesting why is lidar so important to you?

Definitely interested in the K2 plus. Sam do you know when Creality will put more information on their website?

@TheRealSamPrentice

2 күн бұрын

I the next few weeks… and I have another video coming out

Will the multy material system ve compatible with the k1 series?

@TheRealSamPrentice

Ай бұрын

When that upgrade is released yes

I am most interested in seeing how they have implemented the software side of things and, if the K2 line is staying on klipper, how that multi spool system is configured and integrated. Also seeing what other lessons they may have learned from the K1 line in regards to the web interface and what the enthusiast part of the community is looking for.

@jhnstuhlmiller

Ай бұрын

the K1 line of things works great once your root the machine and use Orca, the Creality print just isnt tuned enough. the same model with same infill and layer height is so much better with orca. Creality should switch to Orca as the basis for creality print

Thanks for the introduction to the K2 Plus. This is just my opinion, these new enclosed printers are made for new to 3D printing people. If your not new, your not the targetted customer. Within this shift from previous generation machines with tons of YT info are of negative help to these new generation machines. These new generation machines are as close to plug & play machines as ever. Following old generation printers advice may cause damage to the new generation machines. KZread hasn't caught up to this ... recognizing the (unintended misinfo) will be buyer beware as the old generation is still relevent to still being sold old generation machines. In this new generation machine price range, they hold value to many fabrication/mfg companies ... they just don't realize it ... yet. Lol.

Yeah but is the CMS compatible with the k1 series of printers? I like my K1C and don't need a giant build volume I wouldn't want to buy another printer at this current time, but the CMS is interesting if compatible with the k1 printers

@mackinsvii9022

Ай бұрын

It is compatible. They're releasing kits and we'll probably need to change a few things like the toolhead etc...

@CyberdriveAutomotive

Ай бұрын

@@mackinsvii9022 yeah i was looking at my k1c it seems like the rear fan could be removed and replaced for a poop chute and nozzle wiper, interesting stuff

how was the sound level ?

I have the A1 and I'm looking for another multicolor machine. This just might be it.

When we can buy those?

I love how theyre making the CFS a finished product, rather than a random box that just sits on top

Does CFS have in-built filament dryer and there is no need for the external dryer?

@TheRealSamPrentice

Ай бұрын

Unfortunately not :(

@meetpatel4225

Ай бұрын

@@TheRealSamPrentice Then what is that temperature reading on the screen? what’s the purpose of it?

@TheRealSamPrentice

Ай бұрын

@meetpatel4225 humidity sensor and temperature

More interested in the qol updates over the ams. Looks promising.

Anti Shatter Glass? Freaking amazing 😊

Is it the same terror noise like the K1?

Sam is there a price yet?

Are you also doing the 3 V3 Plus?

I'm never gona buy a bambu because it is not open source... But this K2 I will probable buy it, since creality has consistently released the file os its printers... Cant wait!

I'm hoping this will be my next printer purchase

I love bbl but the fact that this runs kipper could make this a really big hit.

looks incredible for the price, really love the door

@TheRealSamPrentice

Ай бұрын

It’s funny that people care more about the door lol

any idea if the addon coming to ender 3 series?

I'm happy to see this emerging. My top question is price. Another key question is will they support rooting it?

Any idea how thick the bed is? Is it cast aluminum ?

@xsolar

Ай бұрын

5mm

Might get this since you can flash these with klipper 🤷‍♂️

Does the CFS (or CMS) support multi-material or just multi-color of same material?

@heyevgart

Ай бұрын

That's not CMS job to guarantee multi material support. Adhesion is performed by slicing software. CMS will feed whatever you want to.

Creality is turning up the heat.

Looks great! Any mention of a Max size?

I am very eager to watch an in-depth review of the printer and what stuff it has that makes it work.

Good video and wats price of it

The good, the bed size. The bad no improvements on bambu and creality is not known for customer service. If creality wants to win me back they're better be pre-written wikis showing every feature and how to work on it. No top secret parts list.

Its funny how people are calling this a Bambu clone, when Bambu has been coping Vorons and Klipper and no one ever talks about that, finally some good competition to the closed source Bambus

@drosendahl

Ай бұрын

No, bambulabs printers is of course inspired by many printers but if far from clones. They have introduced many new features or at least made them functional for the broad public. This is a pure clone. However, I do agree with your last statement. (Even though I personally would rather have a 300x300 version, this will be a little bit to big in my printing space)

@anssiwalta5623

Ай бұрын

Yup. Basically people don't understand about engineering. Every competition involves reverse engineering. Same like in F1: Redbull makes a new aerodynamics / underfloor and everyone tries to reverse engineer and do it better. It normal life.

@drosendahl

Ай бұрын

@Broskisnowski "AMS" for voron exist, just a little more advanced (EHCF). It would be as reliable if you incorporate a knife inside the toolhead. But yes, bambulabs was first with a really easy to use one and at least I hadn't heard about a filament cutter before it.

@chrisbaker3760

Ай бұрын

Yes Voron didn't invent corexy but Bambu literally submitted the Voron build manual into the patent application for their motion system... it could be worse. The Sovol SV08 is a lightly remixed Voron 2.4 but at least they are paying the Voron Design team royalties. There are mmu options for Voron. There is the ERCF and they have introduced a filament cutter system and more reliable filament buffer than the AMS. There is also a couple of toolchanger systems for them. It's an exciting time for us consumers right now, but let's face it, Bambu didn't invent much at all...they did package up everyone else's ideas and made an amazing product that everyone can enjoy but it's not perfect (no printer is)

Soo .... Basically where bambu was over a year ago 😂 ... Well done 🤣👏

@dazlaa1641

Ай бұрын

but probably half the price and twice the problems

This is awesome! I cannot wait to see if this thing will be as good as hoped! Finally some real real competition! Now they just need to fix the app!