Support me on Patreon for more videos ➙ www.patreon.com/engineericly

When the editor gets paid a bit too much:

@engineericly

Ай бұрын

So much;)

@svgPhoenix

Ай бұрын

That's more than you can do with plain editing. That requires planning each shot in advance and filming it perfectly. That's true cinematography

@userskorea

Ай бұрын

​@@svgPhoenix bit too much cinematography

@RugsTheAlgorithm

6 күн бұрын

Yea soo much 😂😂😂😂😂😂😂 I kept laughing your the reason I buy this 3d printer

Editor: Which video effects do you want? Engineericly: Yes!

@engineericly

Ай бұрын

:)

Bro the editing 📈

@engineericly

Ай бұрын

Glad you like it, man:)

I don't have a creality but your video was so amazing that I watched it to the end. The graphics and animation was amazing.

Dont own the printer but watched the whole thing hust for the editing. Earned a sub sir!

@engineericly

Ай бұрын

thank you for your feedback! I will try to make more editing tricks in upcoming videos as well :)

Great upgrades = awesome video edit But I have K1 Max, so can't wait to see what you have for that one.

@engineericly

Ай бұрын

Thank you for your feedback, I hope this video gets more views, so this will inspire me to make K1 max version as well:)

Arrived for the printer, stayed for the editing. +1 for the K1 Max video next

Dude, that was great. I'd love to see part 2 and the one for k1 max. I'm going to be copying some not all of these ideas for my machines.

@chanman947

Ай бұрын

Same!

@engineericly

Ай бұрын

Thank you for your feedback, I hope this video gets more views, so this will inspire me to make K1 max version as well:)

Well done, and I love your creativity in making your show entertaining. Thank you for the tips!

@engineericly

Ай бұрын

Glad you like them!

Love the video...the jump to finish prints were funny! Please do one for the K1MAX...PLEASE!

@engineericly

Ай бұрын

Thank you for your feedback!

Thanks for the whole kit upgrade explaination. Plus, It's the ending date outing for me. 😂😂😂😂😂

The cuts are perfect! Great editing!! This was a Really well made video! 👍

@engineericly

Ай бұрын

Thank you so much!

I've been hoping for a video like this! I would do it myself, but the only problem is I lack the K1 and all the upgrades lol. Absolutely amazing video mate, it feels like I'm watching Scott Yu-Jan with how well the video flows. Love the upgrades and machine too. I'll definitely be using your video as inspiration when working on future videos. All the best! Cheers, Tommy.

@engineericly

Ай бұрын

Thank you for the feedback! Hope you will get K1 as soon as possible :) I am inspired by his videos as well☺️

Edits on this was next level

So much effort in this video, amazing job!

Amazing video. Can't wait for the K1 Max video.

Loved this whole video. The edits were simply amazing 👏 🤩 and I esp loved the ending of the video. That's how I feel about my k1. it's so beautiful 😍

Thank you for making this video. It is brilliant, the video effects are amazing. Cheers and have a great day.

Woww editing skils are a pure masterpiece!!

This video tickled my brain. ❤🧠

incredibly well made video! No wasted time and a touch of humor :)

@engineericly

Ай бұрын

Glad you enjoyed it!

You made me set the speed down to 1x and watch the whole thing as a mini movie. Great scripting, production quality and editing 😍 And I don't even own a K1, and probably never will 😅

Love the editing! Great video

@engineericly

Ай бұрын

Thanks so much!!

Great vid will these work on the K1C?

Thats really good!

@engineericly

Ай бұрын

Thank you!!!

Nice graphics bro some of the best I’ve seen on KZread

@engineericly

Ай бұрын

Wow, thanks

really fantastic edit! müthiş emek var, izlediğim en iyi edit, tebrikler kardeşim, Türkiye'den selamlar...

Excellent video! I was just hoping to see a support to change the position of the 3D filament spool.

Love your work and the edits, where i can learn how to edit like your vid? like timelapse printing

@engineericly

Ай бұрын

Thank you for your feedback:) My editor said that he will make a tutorial once this video passes 1M views 😁. He is serious about that 🤭

This is an awesome video, I have had alot of these problems with my preorder K1 and will be implementing most of these upgrades. I would be really curious to see how the printed extruder compares to the newer creality model (i ordered the new one but plan on making the printed one out of my old extruder as a backup or for another build). I also used the same clip for the bowden mount but i found the ptfe cable went to high up and I heated it with a lighter (or heat gun) and let it bend down a few degrees to make an easier transition to the bowden tube running on top of the chain link with clips.

@engineericly

Ай бұрын

Thank you for your tips:) Printed extruder was great as well, no changes in quality of prints, but changing filament was hard with that

@edgarlopez-negrete1391

Ай бұрын

@@engineericly Thanks, Do you think it would be difficult to make the printed extruder run with a Nema17?

Bonus points for using dill!

That's what I call a high quality content 🤩

@engineericly

Ай бұрын

Thank you 😁

Nice mod ideas...and dope effects LoL!

editor works masterpiece 🔥

Really nice put together! Nice job. What is the hand pump/spray you used to paint the new toolhead front?

@engineericly

Ай бұрын

Thank you for your feedback. Here it is(affiliated): geni.us/portable-airbrush

Thank you that was a really good video.

Crazy work.

Did you print in PLA or PETG? tks for the video. I will watch again very slowly to be able to do all. I love the effects. tks so much to make fun to watch

sensacional! excelente video! só os realmente melhores upgrades para k1!

Nice video editing work. And incredible mods. I'd love to see what can be done for the Bambu Lab X1-C.

Dobra robota przyjacielu! Dziękuję ci.

Nice I don’t know what it is better the Pinter improve or the video 😂😂

Cant wait to see video for k1 max :D

#9. The display in the print head is of course very cool, I just caught fire, but then I thought that this was extra weight and decided that I didn’t need it)

great editing

@engineericly

Ай бұрын

Glad you think so!

Video vapshe daxshat chiqibdi Omad ishlarizga malades

Монтажёр от бога, просто великолепно👏

@engineericly

Ай бұрын

Thank you!

WOW!!! Excellent!!! But the corner connectors for the Lid raiser are not in your supplied model files. Where can I find them, please?

Good job bro 🥳

Insane stuff

@engineericly

Ай бұрын

Thank you!

Def looking for K1 Max update

@engineericly

Ай бұрын

If the video gets well attention, I will definitely make it:)

Wow...beautiful presentation. Thanks for your job. You are an great actor... Say hello to Brazilians 3D makers.

@engineericly

Ай бұрын

Wow, thank you!

Great topic, thansk 👍

Brat chotki, Printerni ham redline qilib tashladiz😂 gap yo, omad 👍

Amazing

@engineericly

Ай бұрын

Thank you! Cheers!

You, sir, are a madman. I mean that in a good way.

@engineericly

4 сағат бұрын

Thank you!

good job 😊 i think that lot of us buy k1/max in order to print with closed chamber. so infrared heater or active chamber heater upgrade should be the best. thx

@engineericly

Ай бұрын

That's a great idea! Thank you!

Me: watching the video, trying to understand, which wires to cut The editor: nah, bro, not a chance

Please make more potential upgrades part two for the k1+k1c like filters, dual camera, LED

@engineericly

Ай бұрын

Thank you for your feedback

Keep it up! That was a great video! Not my taste for the risers but otherwise great job!!

@engineericly

Ай бұрын

Thanks! Will do!

Q cámara usas para grabar. excelente video

Can you please detail the firmware tweaks you made for the 5015 fans for the heated chamber part? I'm assuming you rooted the printer and made a config change to enable the spare pin on the mainboard?

you are very good at your job. and very funny. please do more videos

@engineericly

Ай бұрын

thank you for your feedback, will do! 😇

Hi, for the KNOMI V2 is it just purchase for the screen only? No need to choose those with board, right?

If you are going to swap out the heater block, I'd go one step further and go to the Flowtech from Micro Swiss. I've been happy with it on my K1 Max.

@engineericly

Ай бұрын

Oh yeah, that was little expensive for my budget, but that is game changer upgrade! thank you for you feedback!

Do a K1 Max version please 🙏

I sub because of the editing

Looking into getting the K1 Max as my 3rd printer. Are these upgrades compatible with it or have equivalents that work with the Max?

@engineericly

Ай бұрын

Some of them are compatible, like active bed heating, auxiliary blast, side fan cover,270 degree door hinge and so on

hi, i bought a K1 about a week ago and saw your video. I'm trying to print the N-UK Riser but the sides exceeds my print value be it on the sides or from down to up. How did you manage to print those with the K1 ? Thanks

Excellent video, and thank you for giving me credit for my duct! You should have picked up my feet for the k1 too, those stock ones are garbage.

@engineericly

Ай бұрын

Thank you for the design, maybe in part 2:)

Это очень крутые доработки👍👍👍 Подскажи пожалуйста, мой К1 печатает окружности эллипсом, ремни натянуты одинаково. У тебя была такая проблема?

Чувак за монтаж 12 из 10 )))) апгрейды тоже все крутые

El cfg para el uso de los ventiladores lo compartes por favor.! Que gran vídeo.! Saludos desde Madrid

I need to know the magnets and the screws etc so I can get the stuff for it cuz I would love to have those

I can't wait to it comes out creality k2 max

@engineericly

Ай бұрын

wow, k2 max already?

I Will be wating the video on the k1 max

This guy turned essentially turned an apple Iphone into a tesla phone. Wish there was these upgrades to the bambu lab x1's (esthetically)

@engineericly

Ай бұрын

Thank you for your feedback! Hope they make it open-source as well :)

awesome

@engineericly

Ай бұрын

Thank you!!!

Definitely need a way to synchronize the rotation of all radiation signs and it should also help with their fixation. It hurts to look at it.

Do the K1 max

Make a video with k1 max upgrades

Creality next release: Creality K1 by engineericly

Even with a tall open riser and temp controlled room my K1 Max still suffers heat creep issues and clogs in the extruder anytime there is a print that has a large volume on the bed.

@engineericly

Ай бұрын

Which material causing the clog?

@colenado

Ай бұрын

@@engineericly PLA. Heat creep is terrible on some of these K1s.

@Coyote27981

Ай бұрын

What is your chamber temperature?

You should change out the pulleys to get rid of VFAs

@engineericly

Ай бұрын

Wow, thank you for the suggestions, can you send me any link related to this?

please make the 2 part

USB dust cover? cover above LCD for holding in temp?

@engineericly

Ай бұрын

Yeah, I had those upgrades in my, but the video was getting so long:(

@switchbladeaa

Ай бұрын

@@engineericly Love the editing man. Couldn't stop watching!

@engineericly

Ай бұрын

@@switchbladeaa Thank you!

Une très belle vidéo . Mais je pense un truc : elle a finalement imprimée toutes les pièces qui lui fallait , donc elle marche bien . En plus il dois avoir fait pas mon de 50h de print juste pour l’améliorer ? J’ai la k1 max avec le nouvel extruder . Je n’ai amélioré que le dessus pour l’aération . La nouvelle buse arrive bientôt . Mais après 100 h toujours pas de soucis à part le bouchage que j’ai eut ( pla normal a grande vitesse et la chaleur qui est remonter trop haut .)

editor: i charge $500 engineericly: i accidentally sent you $50,000

are these available for k1 max?

Whats that spray he keeps usin?

yes please k1 max

@engineericly

Ай бұрын

Thank you for your feedback, I hope this video gets more views, so this will inspire me to make K1 max version as well:)

Please!!!! update for the K1 Max!!! please!!!

I need all this for k1 max😮😮😮😮😮

@engineericly

Ай бұрын

Hope, I will make them soon 🙃

This are a lot of upgrades to make the printer in what is should be.

@engineericly

Ай бұрын

😁

Excelente. Ensina a fazer esses efeitos de filmagem.😅😂😂

@engineericly

Ай бұрын

🙂

What kind of plastic are the parts printed on? PLA?

@engineericly

Ай бұрын

I have used PETG/PLA/ABS depending on the part, but I would suggest using only ABS as most of the parts should be high heat resistant

nice 🎉

I love this video content, but if I need to do this much stuff by myself to make it better, I don't want it... About the same task as my CR-10 or Ender3. I want an iPhone for my next purchase, maybe bambulab is a better option for me?

Ролик прикольный, чувак заморочился нехило... А с кинематикой оси Х ничего делать не пришлось? Вертушка на хотэнде шумная и вибрирующая. Я поставил от sunon 5015 - она не издает вибрации при вращении и слышен только шум завихрения воздуха... Можно поставить вертушку 5020, говорят она ещё тише. Кноми - это прикольно, но бесполезно в данном исполнении. У меня есть тоже кноми, но я его на принтер так и не поставил, он у меня на столе в другой комнате и там от него больше пользы, я вижу состояние печати принтера удаленно...