Thank you both for the Amazing 3D Printer tutorial! My mind is going crazy on the pieces (which are all on backorder) that could be printed to fix broken plastic gear, clevis, and even enhance some plane design aspects. What is super helpful 90% of the things you run into, I run into as well so helpful you figure things out for us.

Love that you are doing a video on this! I love all your content. Keep at it!

@BrianPhillipsRC

7 ай бұрын

Thank you! Will do!

the reason for the vacuum packed is that it can absorb moisture from the air which will result in poor quality prints any long term storage should be re sealed

Ohhhhh dayyumm, Brian Philips is taking the dive into 3D printing 🔥

Yea . Best 3d printer review. Ive been curious about getting one to make landing gear doors.

hi Meghan, great job on taking the lead in this vid!!!! Andrew, loving your design work !!! keep up the great work!!!

@BrianPhillipsRC

7 ай бұрын

Thanks so much!

Love using 3D prints to replace foam ordnance.

Hilarious Brian, love this vid

I've got to get a 3D printer, Thanks for sharing this guys...

@BrianPhillipsRC

7 ай бұрын

You should! We held out for a long time but now we're super excited to have one!

What a fun family.

Printer says "No touching!". Proceeds to do nothing but(t) touch it... That's so Brian!!! And also; Bad Brian!!! When the printer is calibrating and input shaping it takes not of the state of the printer. When you touch (or lean on the printer, in the extreme) it throws off the calibration. Also; you need to do the calibrating and input shaping anew when you move the printer to it's final spot, because the table it sits on and whatnot influences the calibration.

You guys continue to be amazing. The time you spend on product and your channel is beyond words. Thank you

Is an amazing machine, only 2 things I would highly recommend: Change the hot-end to Micro Swiss Flow Tech and you will not be disappointed, OEM hot-end is not the optimal for what this printer can really do. Also, do not use the Creality slicer, is junk, recommend Orca Slicer.

why do I watch all your vids start to finish,lol

love your videos and conversations! IDK why sometimes you give peter griffins vibe haha

I suggest you watch more youtube video's made by other users on the K1 as your missing the point or not reading the manual. To remove the print NO scraper, Remove the spring plate, Bend the plate and the print will pop off

You should have a flexible, removable print bed there! No need for chiselling up the finished piece! Lift the tab with the fingerprint on the front right and flex the plate up and away from the magnetic base. Flex the steel bed in your hands and the part should easily pop off.

@BrianPhillipsRC

7 ай бұрын

It does have a flexible base plate... our 14 year knew that, but we didn't ;) Works like a charm!

@thomasjohnson6669

6 ай бұрын

@@BrianPhillipsRC Once the flexible bed is removed and cools down, the benchy will pop right off when the bed is flexed. Also, bed should be cleaned between prints (soap, water and alcohol mixture) to remove finger print oil. Finger prints on the bed definitely affect the first layer adhesion.

"KZread, it's...Megan Phillips" !?! I had to double take that intro😂 I thought, " that sounds like the Camera Crew." It was real, " Who's Not-Flex" moment for me, Camera Crew 😊 Awesome job, Andrew! You're a budding star, my man! Thanks for scratching the surface of this media for those of us in the stone ages, still ordering stuff from "Chyina" 👍

Printing an rc plane is a total different way to learn how to build a plane and put in the electronics, then fly.

lol interesting I just watched a review on this printer and then I saw this post 😅 then 30mins after eflite drops the new 70mm thunderbird 😂

Very cool and fun ! Awesome 3D printer !!!

It does 50 mm

It has gotten to the point where I have been designing and printing parts for my planes. Finding parts nowadays is getting harder and harder. Just got done making motor cowls for my Avios Kingtwin and the Turbo Timber. 3DP is the way to go. Keep up your great videos. 😁

Yes 3d printer's are a excellent accessory to the hobby or hobbies can't live with out mine. Again great job guys

@BrianPhillipsRC

4 ай бұрын

We're looking forward to using it more!

Very nice but way too expensive for most. Would love to see you review a more affordable 3D printer in the future.

@BrianPhillipsRC

6 ай бұрын

We would definitely consider a more budget friendly option!

@robc5296

6 ай бұрын

@@BrianPhillipsRC Thanks so much Brian, Camera Crew and Family!

Take the plate out and put it on the marble countertop, the Benchy will probably just about jump off the plate

Time to start exploring 3D printed planes... they're pretty awesome for me. I have several Eclipson and 3DLabPrint planes. Haven't tried PlanePrint yet. There are free models to print to see if you like printing your planes. The 3DLabPrint J3 Cub is a nice starter model. There are many KZread videos out there...

Can it flies ?

@BrianPhillipsRC

7 ай бұрын

I mean, you could print wings for it, but it's pretty heavy. :)

Print a 3D Plane on a video. you have to load the filament.

Read the BOOK

Take it out and flex it.

talk about a cluster, should have followed the directions in the manual, and should have listened to meghan.

Don't put your hands on the plate, it leaves grease from your hands.

I have been lppking at one of these for a while, but after three strokes I can not even program my phone or reprogram my complicated EC controllers that I had before the last stroke so my Noble and my Spektrum DX6 which is a pain. I was hoping to find one that are for Dummy's my want is to do 5th/6th & 7th scale accesories like fire extinguisher's jacks mounts for cameras as most are to big and ugly driver & navigator guys ( Oops and girls) got to be politically correct nowadays

Like he never has seen a 3D printer.....

Nice Printer, but way tooo loud 🙉