This is my first time also making KZread shorts! Forgive me as I am still learning the layout in 9:16 format! Regardless, I'm excited to share my first-time experience with you guys soon on this machine!

When i did a test print of my KE with the Speedbenchy my monitors were also wobbling AF.

My KE made me move the machines to a solider platform. I was concerned the oscillations, the stand was moving so much, would hurt the print. Loving cutting printing time down.

Got mine all set up and waiting for my spools of filament to come in. Can’t wait to start printing and compare with my older printer. Looking forward to your video 👍🏼

Set mine up and when it was bed leveling the first time, the movement speed made me jump. Its incredibly fast

@polar_baer

7 ай бұрын

Love the pfp

Looking forward to more🎉🎉

@Creality3D

7 ай бұрын

Do you mind if we share this video on our official channel? Of course, we will tag you as the creator and link back to your channel :)

@NiTecIndustries

7 ай бұрын

Wow! That would be an honor. If I happen to have any more I’ll let ya know. I gotta structure up a 2 month in review of this thing. Pass me a link when it’s uploaded; I can’t wait to see it!

@Creality3D

7 ай бұрын

@@NiTecIndustries Thank you so much!!!!!😃

got my KE a few weeks ago...I got scared when it started zooming around

Thank you so

What mods and speed settings did you have on your ender 3 pro? It looks pretty quick compared to stock

@NiTecIndustries

10 күн бұрын

@@brananandreu4086 the footage was sped up for the short, I can’t remember back in its day. I have a Nebula kit with a spider hot end and direct drive, and I got to push it up in the 200’s at one point.

@brananandreu4086

9 күн бұрын

@@NiTecIndustries thanks

I wouldn't just get rid of the ender 3 pro but that thing is awesome!

@NiTecIndustries

8 ай бұрын

It’s definitely a wake up call to research into advanced upgrades to keep up with this puppy. At least now I want to look into linear rails, a hotter end (Spider, dragon, etc.), and better motor control (klipper?)

Do you find that out of the box it prints high quality, like in that benchy?

@NiTecIndustries

Ай бұрын

@@DarcyFletchh Oh yeah! I had to do minimal adjustments to the default parameters in the software

@DarcyFletchh

Ай бұрын

@@NiTecIndustries I might be ordering mine tommrow, but out of the box do you have to change any settings to make it print alright and if so are they hard to change, also do you get your print file, send it to slicer, slice it and then save it on usb and plug it into printer?

@NiTecIndustries

Ай бұрын

@@DarcyFletchh number one you’ll need to change the voltage setting coming out of the plug from 220 to 110. It’s the little red switch. There’s a little bit of out of the box assembly but it’s easy to do. As far as printing you can either save it to a usb and load it on the printer, or send it over WiFi if you’re using creality print. Settings wise I would recommend looking up teaching tech or makers muse to get an understanding of what each parameter does, and troubleshoot any issues when going for the first time. Patience in setup is key.

@DarcyFletchh

Ай бұрын

@@NiTecIndustries ah okay thankyou, I live in Australia though so we are high voltage I think, 230v or something

bought twice both failed with error messages, support wouldn't respond had to return both times.

@NiTecIndustries

6 ай бұрын

Bummer! Sorry that happened.

Sixteen minutes just to make that boat I own that printer

I just got mine. I found that the automatic z offset is slightly too high. Need to figure out how to adjust it down a smidge

@NiTecIndustries

8 ай бұрын

I think you can actually adjust that in the settings. I saw the setting recently..

@DeRock401

7 ай бұрын

Yeah it’s in the settings. Mine is not working great either. I think my offset is too low but I can’t get nothing to stick to the bed properly and when I do, it gets knocked off halfway through the print cuz the nozzle is too close to the

@YouTubestopsharingmyrealname

7 ай бұрын

@@DeRock401 what I ended up doing is, auto calibrate which has the offset just slightly too high, then I changed the first layer flow to 120%. That's perfect on mine. With that, I did a single layer print and measured with calipers and it was right on .2 layer height

Still waiting for mine, hope its okay, k1 heard in the beginning had some problems, later solved

@NiTecIndustries

8 ай бұрын

So far it’s doing great! Getting accustomed to the Creality slicer supplied on the flash drive, and I got overture PETG filament tuned in! I ordered it back at the beginning of this month, and I will say, for stock setup, integrated offsets and leveling, and minimal adjustments on the slicer…I couldn’t have been more pleased. You’ll definitely enjoy it when yours arrives!

@johnchalkiadakis

8 ай бұрын

@@NiTecIndustries Yeah PETG and ABS-ASA is what i used to print in my S1 Pro, got tired bed leveling for an hour just to have it set wrong anyway so i sold it and got V3 KE, is it really hands free bed level? Because i suck at it 😂

@NiTecIndustries

8 ай бұрын

@@johnchalkiadakis Absolutely with it's CR touch probe and technology to automatically determine Z offset! That's weird though, I thought the S1 series came factory with a CR touch? I print with PLA, TPU, and PETG, and will soon down the line invest in setups for ABS (enclosures, ventalation, etc.)

@johnchalkiadakis

8 ай бұрын

@@NiTecIndustries It did have CR touch, either it didn't work properly or i suck very much at bed leveling, still kind of new to 3d printing, had used the S1 pro for about 5 months... thanks for the replies!

@NiTecIndustries

8 ай бұрын

@@johnchalkiadakis No problem! Best of luck when you get yours!

Is that good for beginner for first 3D printer ? I have knowledge about coding and was end user.

@NiTecIndustries

8 ай бұрын

If you have a general understanding of how the 3D model slicing software works, and know how to set up the machine parameters (speed, temperatures, etc), then it’s easy pickings. I’d recommend doing a little research and learn to make minimal adjustments to the Creality print profiles to make your materials work.

@petchie1455

8 ай бұрын

@@NiTecIndustries thanks I know abit how it work but not deep as how each config effect.

what else can you do with that speed except this benchy? ;)

@NiTecIndustries

6 ай бұрын

Skies the limit. There was also this on-board spool anti-tangle device that clamps over the factory spool holder. I'm waiting for more colors or other manufacturers to follow through, but what I can tell ya is I'm pushing beyond non-creality manufactured filament limits, and still getting exceptional quality!

@whoarewenow

6 ай бұрын

@@NiTecIndustries I mean can you print anything else on 600mm/sec except this benchy?) It looks like other prints limited to 300

@NiTecIndustries

6 ай бұрын

@@whoarewenow Well from my go so far, it’s case by case. It claims up to 500/600 but 300 is optimal. I say case by case depending on what it has to print in the model (overhangs, small features, bridges, etc.)

Promo sm