Creality Ender 3 V3 KE! Why everyone LOVES it?!
Creality knocked this one out of the park with this Ender 3 V3 KE! Ultra fast, 500mm/s Klipper 3D printer that is easy enough for everyone to use! The user experience is fantastic, highly recommend! Just as easy to use as the SE, the KE is super impressive.
Thank you to SainSmart for sending over this Creality KE for us to share with our audience and also for the stack of your SainSmart TPU 95A!
Some of the links shared in our content may contain affiliate or promotional links where we may receive compensation through your use of them. Thank you for supporting our content!
Creality Ender 3 V3 KE (aff)
loyal.ms/SainS...
SaintSmart TPU (aff)
loyal.ms/SainS...
SainSmart Website
sainsmart.com
Nintendo Logo Model
www.printables...
--
I am incredibly fortunate to have Polymaker as my official sponsor! Using my affiliate link is a fantastic way to help support our content!
loyal.ms/polym... (aff)
Did you know that I am LIVE on Twitch 3x a week (Mon/Wed/Fri @ 5PM Pacific) where we nerd and geek out about 3D printing for HOURS! Oh, and we also have sponsored giveaways EVERY SINGLE SHOW! Come by, say hello, we'd love to see you there.
/ loyalmoses
Also, we have one of the ABSOLUTE BEST 3D printing discords that have ever existed! An incredible, thriving and supporting community with weekly contests and giveaways as well as support channels and so much more! I do most of my announcements there as well, so you'll want to join for sure!
loyal.ms/discord
We have the BEST sponsors for our content, take a look at these amazing companied who regularly sponsor our content here on KZread and other platforms!
Bambu Lab
loyal.ms/bambu (aff)
Gloop!
loyal.ms/gloop
Micro Swiss
loyal.ms/micro...
Slice Engineering
loyal.ms/slice (aff)
LDO Motors
loyal.ms/LDO
---
Video Chapters (if any will be here)
00:00 Intro
01:13 SainSmart
01:42 Main Features
02:38 Build Volume
03:11 Toolhead
04:16 Motion System
04:32 Interface
04:44 Slicing
05:12 Print Results
07:03 Recommendation
07:18 Price
07:48 Thank You!
#3DPrinting
Пікірлер: 189
I just bought this and ive been on a printing spreeeee! I love this machine!!
@LoyalMoses
3 ай бұрын
Wonderful!
Looks like a really solid machine at a low price. I like the linear rail, dual Z rods, direct drive and auto bed leveling. Budget 3d printing is so much better now then it was 3+ years ago.
@LoyalMoses
6 ай бұрын
Crazy how fast everything is advancing!
@ty8324
6 ай бұрын
wait till you figure out everyone is complaining about the dual z rods. Many people have shaky bed and even some rod wiggle in there machines
@LoyalMoses
5 ай бұрын
Everyone?
This was my first 3d printer and I bought it mainly because it had the features I needed for only $75 more than the base version. The printer is very easy to use for a newbie and has many security measures that make it easy to use.
@LoyalMoses
3 ай бұрын
Thanks for sharing!
My first 3d printer was an anet a8. Then I upgraded to an anycubic chiron. Then I got out of the hobby. Nice to see a creality printer finally saying "let's make the experience a nice one" finally hahaha
@theglowcloud2215
6 ай бұрын
Now's a good time to get back into it, considering how far printers have come since the dark ages of the A8.
@LoyalMoses
6 ай бұрын
The water is fine, jump on in! 💜
@KoreyMacGill
6 ай бұрын
I'd love to grab a large format core xy. Time will tell.
@user-wo7rl4nm7w
6 ай бұрын
Started off with a dumpster fire, literally
@LoyalMoses
5 ай бұрын
Heck yeah, some are coming!
I just bought one, the printer is insanely good for its price. I’m impressed.
@LoyalMoses
6 ай бұрын
Congrats! Such a good machine.
@StatusQuo209
4 ай бұрын
How does it compare to a AD5M for 289? That's a CoreXY printer.
Love the "out of the box" experience is improved. Would also encourage (if they haven't already) to have companies to create (or have content creators create for a company) good maintenance/tuning videos. That way there is great foundation of educating, if that needs to be addressed. That's what we strive for. The best experience and the best prints.
@LoyalMoses
6 ай бұрын
Definitely! Those would be great!
Ordered, first 3D Printer so I'm going to see how this goes! Thanks for the review, info and content!
@LoyalMoses
2 ай бұрын
Congrats! Let me know what you think of it!
I have the k1 max and the qidi x max 3 and the KE. The KE is the most reliable out of them all. I use orca and klipper with it and it just doesn't disappoint.
@LoyalMoses
5 ай бұрын
Awesome to hear!
I have an SE and my friend has a KE, neither of us have had a single problem with using it. We're both robotics engineering students so most of our parts are PLA, PETG and TPU which all print fine off both printers. Her KE is definitely significantly faster but both seem very reliable and easy to use.
@LoyalMoses
3 ай бұрын
Awesome! I like both machines
That's amazing! My step dad just got this printer so I'm helping him by looking up what I can on this new printer
@LoyalMoses
Ай бұрын
Awesome! Congrats. Let me know if I can help with anything!
Running klipper on a pretty modified v2 and it's brings so much new life into printers. So happy to see it becoming more popular. Just switched from cura to orca, loved curas interface and why I used it. Orca nails it, adding more features, and one click printing for klipper which is fantastic
@LoyalMoses
6 ай бұрын
Orca is great for sure!
I just got mine yesterday and done lots of prints its fast and really good prints no fails yet. upgraded from old ender 3 v1
@buildersmark
6 ай бұрын
Awesome!
@LoyalMoses
6 ай бұрын
That’s awesome to hear!
@JoseMartinez-jd6fk
6 ай бұрын
What kind of filament do u use? hyper or standard?
@bashermon1
6 ай бұрын
@@JoseMartinez-jd6fk ELEGOO Rapid PLA Plus from amazon £25 for 2x1kg rolls
My V3 KE arrived today and it was printing TPU perfectly right out of the box. It's such a step up from my 3 year old Ender 3 Max that needed quite a few mods to print TPU. Prints that would take all day now just take 3 or 4 hours. I couldn't be happier with it. Since I'm disabled, all of the quality of life additions like auto bed levelling and remote start and monitoring are game-changing for me. My back and shoulders are so grateful that I'm not having to contort myself into the back of the enclosure to adjust the rear bed levelling screws any more - especially when I'm using an 85C bed for PETG!
@LoyalMoses
2 ай бұрын
Fantastic! This makes me happy to hear.
I'm a complete noob when it comes to 3D printing, for quite a while I didn't see a lot of point in having one, but not so long ago it dawned on me how beneficial one could be to me. I have a car that is a classic in age but not so old that it doesn't have a lot of plastic trim and such. Because it's getting older some of the plastic components are becoming more and more brittle and are impossible to replace, hence my new found interest in 3D printing :) I've been looking at and reviewing a good number of entry level 3D printers for a quite a few months now and was on the cusp of buying one only to find it was discontinued and also I read online through other review articles, and KZread videos, that 2024 would bring new things. And it looks as if it has :) This printer is now looking very much like it will be the go to printer for my needs, previously it was the Sovol SV07. I'm not sure there's a whole lot of difference between them, I'll have to do a comparison. The Creality might take the prize though :)
@LoyalMoses
2 ай бұрын
Exciting! Thanks for sharing!
At least for begginner friendly printers the M5C is so much better am and cost only 350$ (if you use the free coupon provided) and 320$ when on sale, it's another level, build quality is like you probably have never seen, quality app too. 3 fans too. Had it for a while and just as a begginner really happy, though you need to use their slicer to use it online/drag the gcode to the slicer
@LoyalMoses
5 ай бұрын
Love to hear it! We have the M5C here in the studio, video coming soon!
I've got the SE fantastic!!
Love the video, was thinking of getting the KE but found out that the flashforge adventurer 5m was on sale for $300 and I wanted to try a core xy so went with that one 😅 really making me rethink with this video though
@LoyalMoses
6 ай бұрын
I've heard great things about that Flashforge!
TPU THE WORLD
Can this print multi-color - since there's no AMS, can the first layer be printed in color a, then a filament change and finish printing in color b on the same piece? If not, I may have to move up to the Bambu A1 with AMS.
@LoyalMoses
2 күн бұрын
Yes, you can definitely do filament swaps mid-print on any number of layers, just not specific details throughout the print like an AMS.
@rickp3259
2 күн бұрын
@@LoyalMoses Awesome - thanks! I believe a V3 KE is in my future!!
I bought the other new Ender machine the Creality CR-10 SE. 😜
@LoyalMoses
6 ай бұрын
Awesome!
I just bought one from Micro Center for 206 open box. It will print along side my Ender 3 V3 Se. I am saving money for a Bambu Lab.
@Geo64x
4 ай бұрын
Damn, wish we had Microcenters in England. I paid £250 ($315) for mine from the official website, and that's with a 15% discount
@LoyalMoses
2 ай бұрын
NICE!
Have you seen Snapmaster 2.0 F250 and F350, print only? Can’t find any real reviews. I’m 73 and looking for my first printer. Dealing with the files and software is my big concern. I really like your reviews.
@LoyalMoses
5 ай бұрын
I’ve not used any of those F series printers, so I wish I could help! Tell me more about what you want to print! I’ll do my best!
I am currently tied between two different models, the Creality Ender 3 V3 KE and the Elegoo Neptume 4 Pro for our first home 3d printer. I am slowly leaning towards this one, but not a 100% certain. Right now I am still watching reviews and waiting to see if there will be any easter sale. What's your take on brand customer service and reliability, is one more favorable?
@mariuspetcu7482
4 ай бұрын
I don't own (iet 🤞LOL) Creality ender 3 v3 KE but I own Elegoo Neptune 3 Pro and I can tell You, is not even close to the Creality KE so if if You can take it ...
@diegovn
4 ай бұрын
The Creality printer is better, but their after sales support is garbage. Elegoo has an incredible support
@LoyalMoses
3 ай бұрын
Did you decide?
@rc240zxt
3 ай бұрын
@@LoyalMoses I ended up going with the Creality Ender 3 KE and Rooted the machine running Fluidd/Orca. Couldnt be happier, now I am looking into 300 x 300
Was about to pull the trigger on the KE, but the Ender-3 V3 literally just came out. Will you be comparing the two ?
@LoyalMoses
5 ай бұрын
Yes, as soon as it arrives, I'll compare it!
@diegovn
4 ай бұрын
I just got the v3, and it's incredible. But do not justify the price difference
Maybe I missed it but what's the max volumetric flow? I just don't see speeds over 200mm/s without crazy extruders
@LoyalMoses
6 ай бұрын
300mm/s is super common, in-fact a couple of my prints over the past month or so have been at 300mm/s - everything has changed in the last 12 to 18 months - extruders are moving more material, heat creep is becoming less of an issue as heater efficiency is increasing. Even high-speed filaments are having an impact as they melt and cool quicker and more evenly.
Just stumbled upon your videos yesterday. Looking into 3 printers. I looked at this one, but based on your thoughts on the Artillery Sidewinder X3 Pro, I just purchased the X4 pro. Hope I made the right choice 😬
@LoyalMoses
6 ай бұрын
Oh! The x4 lineup is great! Video soon!
I bought the SE just because I'm new to this world and didn't really know the advantages of the KE. Now I want a KE just because the WIFI printing. Transferring the files with with a SD card is soo inconvenient....
@LoyalMoses
2 ай бұрын
Yes, that can definitely be nicer! How is your SE running though? You like it?
@soniccinos
2 ай бұрын
@@LoyalMoses Yeah overall I'm pretty happy with the prints of the SE, the printer is running fine. The only thing I want to try is upgrade the model fan. Since if mainly blows on the right side, in one specific print it became very obvious the lack of cooling in the left side overhangs.
@AzTheCreator
11 сағат бұрын
You can add a nebula pad to your SE, to give it a lot of the KE features, so you can WiFi print on your SE
The only problem I'm having with my KE is that the gantry doesn't appear to be square, so tall, skinny prints have a lean to them. I'm just afraid to screw with it to try to fix it. Not to mention it only impacts a specific type of print, so it's not a HUGE deal.
@LoyalMoses
2 ай бұрын
Oh wow. How much is it off do you think?
@IgnusFast
2 ай бұрын
@@LoyalMoses Not much; maybe a degree? But it's enough that my prints of the SpaceX Startship/Booster all failed because the parts joined with a noticeable bend at the joints. For the Booster I was able to rotate every other segment 180 degrees and get a roughly straight ship, but I had to pre-join the Starship to get anything close to normal. :( It's my first printer, so I really don't want to risk breaking it.
@LoyalMoses
2 ай бұрын
Dang it. I totally get you not wanting to break it.
I have just been burned by creality too much. All 6 printers I got from them only functioned as advertised for about a month before falling apart in some form or another.
@LoyalMoses
6 ай бұрын
That's terrible to hear!
I have a Bambu Lab P1S and absolutely love it. I came from a Anycubic Kobra and a heavily modded Ender 3 V2. The jump was staggering. Those two printers are now retired and I'm now needing another prnter to supplement my P1S for quick and small prototypes. Assuming build volume isn't a concern (for me), would you recommend the Ender 3 V3 KE or the Bambu Lab A1 Mini? I believe they're the same price if you don't get the AMS. Which I don't need.
@IImorteII
6 ай бұрын
Bambu Lab A1 mini - it's a no brainer
@LoyalMoses
6 ай бұрын
A1 mini for sure is a GREAT machine!
I like your reviews, can you do one with an enclosure, i would like to print abs which is temperature sensitive and more suited for an enclosure set up. I am looking at this one K1 Speedy 3D Printer Combo, thanks
@LoyalMoses
4 ай бұрын
Thank you! I’ll see what I can do!
@outshotdarts
4 ай бұрын
Great thanks@@LoyalMoses
@outshotdarts
4 ай бұрын
I have an ultimaker 2+ at present, things are moving towards more speed and still maintaining quality, i was looking into a bambu, but my friend told me about the creality and how happy they are with it and how they are so much cheaper too. I lijke the versatility of my um2+, easy change nozzle and run any material, i have printed flexi, which i have to print half speed of pla or abs, because of the bowden, so i am interested of the print speed of tpu/flexible and whether i can print abs, which can be difficult
I bought a 100$ Tronxy X1 10 years ago and it lasted 10 years... I think ill upgrade to this.
@LoyalMoses
3 ай бұрын
Very cool!
I wish I had more courage to print in TPU...
@LoyalMoses
5 ай бұрын
What is holding you back?
I watched this review when looking for a first 3D printer. So I purchased the Creality KE. It has been awesome and has been running non stop for the last week. Then saw the video about the Bambu A1. For longevity, which would you recommend?
@LoyalMoses
2 ай бұрын
The KE is going to allow more tinkering, the A1 is going to be a better long term experience and out of the box quality printer.
thanks for the vid. I am looking to start 3d printing spaceship models, battlestar galactica, star trek, star wars, tec. This looks like a good one to get. Are there any others you might recommend?
@LoyalMoses
3 ай бұрын
The KE, SE, V3 are all amazing Creality machines.
I'm currently waiting for this printer to be shipped to me, looking forward to it! Quick questions: the SainSmart TPU link takes me to a 95A hardness version of this material, is this what you tested? Would it be posible to go a bit softer, or maybe it's not recommended? Which max. print speed is recommended for printing 95A TPU with this machine? ThanX a lot, great review!!
@LoyalMoses
5 ай бұрын
Yes, that is what we tested! Prints awesome! And congrats on getting the machine!
Which is best ; ender 3 v3 ke OR Bambu Lab A1 mini??? Please i want to buy one of this. Suggest me.
@LoyalMoses
5 ай бұрын
If you have the budget, the A1 mini is the best experience in 3D printing right now between your choices. The KE is a great choice, second to the A1 mini.
Did your printer have solid bed? I think there are printers with loose Y bearings (could be undersized rods) leading to the bed rotating moving up and down at speed -> ruins print quality. Z frame mounting to plastic base with heat inserts from top does not feel very forgiving for tightening the bolts or long time endurance. But this printer still feels like value for money :)
@LoyalMoses
6 ай бұрын
This printer is FANTASTIC for the money! Highly recommend.
If you plan on fine tuning the motor steps you’ll need to install fluidd or mainsail, as creality os is quite locked down
@LoyalMoses
5 ай бұрын
99% of printer buyers aren't concerned with this, just a very small percentage.
@Hankbob_Hillpants
5 ай бұрын
I agree that the setup out of the box is great for most prints, but even a very small amount of error can ruin the functionality of mechanical parts with tight tolerances, such as bushings, and small gears 0.1mm can be the difference between a part that spins perfectly, or one that ceases up every half rotation
Just found your vids. How did you use 2 colors on the ke?
@LoyalMoses
6 ай бұрын
Manual swaps. Pause and change filament or cut and remove it from the filament runout sensor and you are presented with a filament change option.
I noticed STL was mentioned. I just got this machine and have to put it together…I’ve never used one. I just bought some STL files from Etsy. Why am I getting the feeling these won’t work ? Any pointers would be beyond appreciated! Thanks
@LoyalMoses
4 ай бұрын
STL is just the file format that the slicer uses - those will work great!
Surprised to hear about the glue stick. I don't need any for PLA. I did need it to make PETT stick though.
@LoyalMoses
6 ай бұрын
Yeah, my PLA stuck crazy good after I cleaned it with soap and water.
Nice overview, another solid choice in the pantheon of 2024 printers.
@LoyalMoses
6 ай бұрын
Agreed!
Nice printer, I like it.
@LoyalMoses
6 ай бұрын
It really is! 💜
How did you pause to swap filaments? I couldn't find a way to do it. Usually I use Pause At Height in Cura but this machine doesn't yet work with Cura.
@LoyalMoses
6 ай бұрын
I just did pause and manual swaps, also runout sensor offers filament change.
@spartan2451
2 ай бұрын
@@LoyalMoseshow?
I'm trying to pause a print with the ender3 v3 KE just like you did. It's does not seems to work either with the touch pad or by placing the PAUSE command in the gcode. Either way the printer head retract itself, drop the filament temperature to 140 and then resume printing right away. Since the temperature does not go back to 220, the print fail with a 2111 error message. I'm on the lastest firmware : V1.1.0.13.
@LoyalMoses
3 ай бұрын
Oh! Did you ever get it figured out?
@maximedesbiens290
2 ай бұрын
@@LoyalMoses Yup, M600 did the trick.
I’m fairly new to 3d printing, is a core xy machine better for bed adhesion than a bed slinger? I seem to be having adhesion issues with my Ender 3 machine lately, mostly PLA and it’s the S1 pro I believe
@LoyalMoses
5 ай бұрын
The motion system doesn't affect bed adhesion.
1:29 the Estonian flag colors, nice!!!
@LoyalMoses
6 ай бұрын
Cool!
Makes me wonder why the Ender 3 S1 was $400. Bambu gave a real kick in the butt to these companies who had become complacent and lacked innovation while milking us with cosmetic levels of upgrades.... now in 2024, everyone has or will have 500mm/s bed slingers lol
@LoyalMoses
6 ай бұрын
Absolutely! Competition is great, and it’s making it better for all of us!
I'm thinking of buying this printer as my second machine. You stated that this KE is compatible with all slicers, but I've been reading a lot of Reddit posts about people having issues getting or creating profiles for this printer in Cura or Prusa Slicer. If I wanted to use Cura after purchasing this, could you point me in the direction to set it up properly?
@LoyalMoses
3 ай бұрын
Did you ever get it?
@FrankFulci
3 ай бұрын
@@LoyalMoses I actually ended up getting the v3 CoreXZ
The printer itself is great. WI-FI will not stay connected. I have tried everything. Contacted support, 3 weeks to get back to me no help. Downloaded the newest version of Creality Print this morning. It won't open any files. Such a great printer, everything else about it really sucks. User experience has been awful.
@LoyalMoses
3 ай бұрын
That’s terrible, sorry to hear that!
@Mrdsmith500
3 ай бұрын
@@LoyalMoses After all these months, I got Wi-Fi working this morning. It was an IP issue. Had to fix it through the router. I still can't get files to open in the new version. Progress anyway.
What about Creality CR 10 SE
@LoyalMoses
3 ай бұрын
I've not used the CR 10
With an external enclosure added, can you print polycarbonate?
@LoyalMoses
4 ай бұрын
PC is going to require some additional temps, so likely not the printer for that.
Hi, if i can get CR-10 SE with the price of this KE, Which one should i get. I can buy it for $284 shipped locally to Malaysia.
@LoyalMoses
5 ай бұрын
KE is a NICE machine!
Im a total beginner, so can i ask what brand filaments you recommend. Ive had my KE about 10 days and have only used ender black PLA, i have not used the small sample of ender Ultra PLA either. Should i install vanilla klipper? And lastly which Slicer do you recommend besides Creality print?
@LoyalMoses
2 ай бұрын
I love Polymaker filament and Bambu Lab filament!
@LoyalMoses
2 ай бұрын
Not a fan of older Creality Print, Orca is great!
@dgmr22
2 ай бұрын
@@LoyalMoses thank you, I'll have a look, I'm a bit better with the printer now, I turned the speed down a bit too and don't get so many failed prints lol.
Hey LM, Do you have a discount code for us loyal fans? Thanks!
@LoyalMoses
6 ай бұрын
I wish I did!
I just got one just a little confused about printing tpu it doesint seam to work
@LoyalMoses
5 ай бұрын
Join our discord, we can easily help you there!
I just got this printer. Top left part of the bed is offset by -0.73 while the rest sit below -0.5. Should I be fixing this? If so, how do I do it?
@LoyalMoses
6 ай бұрын
The mesh leveling should take care of that, not a problem at all. Have you been having issues or just concerned?
@misclickable
6 ай бұрын
@@LoyalMoses I’m a beginner in 3D printing so I wouldn’t even be sure if I was having a problem :D I was mainly concerned if it would create a problem though. I’ll try to tune my printer today but they all require rooting which I’m not very familiar so I’ll look into that, thanks!
@LoyalMoses
5 ай бұрын
Oh! Try not to mess with them too much like that until you have a little more experience. Join our discord if you'd like some tips and help! loyal.ms/discord
How can i print from thingaverse with this printer?
@LoyalMoses
4 ай бұрын
Download the STL file and use your preferred slicer!
@gmummy
4 ай бұрын
@LoyalMoses I have an STI Subaru but probably won't work. Also have Work wheels staggered. I get boost creep when I exceed 5400rpm
Will you be doing Anycubic Kobra 2 series?
@LoyalMoses
6 ай бұрын
I imagine we will!
So this is a elegoo neptune 4 pro. Or am I missing something.
@LoyalMoses
6 ай бұрын
Those are vastly different machines. Different build volume, completely different cooling, different leveling system, dual-z vs single-z, different hotend, and on and on.
How is this compare to the sovol sv06?
@LoyalMoses
6 ай бұрын
I've not tested an SV06, but have heard great things about them, especially compared to Prusa MK3s (which I have several). This Ender KE is a NICE machine, fast and solid, I like it a lot.
never got the Creality Ender 3 to work
@LoyalMoses
5 ай бұрын
Sorry to hear that!
Would this be a good first 3d printer??
@LoyalMoses
5 ай бұрын
Yes, the SE or KE are good machines!
Ender V3 Max nea or This Ender V3 KE?
@LoyalMoses
3 ай бұрын
Not had the max yet, so not sure!
!enter
have you tried to slice with cura? if so and it worked how did you get it to work? mine said unexpected error when I loaded the cura file from usb and started to print. there was not a printer profile so i used the se version and it didn't work.
@LoyalMoses
5 ай бұрын
I have not yet. I am not a cura user for the most part.
Does this one has klipper?
@LoyalMoses
6 ай бұрын
Yes, it is Klipper.
So the neo with klipper?
@LoyalMoses
6 ай бұрын
Quite a few differences over the Neo
@paintballercali
6 ай бұрын
@@LoyalMoses guess I wasn't paying enough attention
@LoyalMoses
5 ай бұрын
I am going to assign you some homework!
KE = Klipper Edition
@LoyalMoses
6 ай бұрын
Yeah, lots of people have been saying that, obvious but I couldn't find anything on the Creality website.
First Woo
@LoyalMoses
6 ай бұрын
😆
Algorithm.....
@LoyalMoses
6 ай бұрын
Gracias!
@paintballercali
6 ай бұрын
@@LoyalMoses de nada
hey @LoyalMoses when is the next discount for polymaker
@LoyalMoses
6 ай бұрын
I am not sure! I can always ask. :-)
Your printer link shows $299. Scamazon for ya. I'm sure it was $279 when you added it.
@LoyalMoses
5 ай бұрын
That happens! Wish we could update videos!
Oh…I can tell already….these videos are going to be very bad for my wallet! ❤
@LoyalMoses
6 ай бұрын
No kidding!
its cool
@LoyalMoses
Ай бұрын
It is!