Excellent review. I have an Ender-5 Pro, and this is definitely on my wish list now. The accessories and safety glasses are great points that I’m glad you covered. 👍🏻

I just got mine yesterday and your review answered so many of my questions. Thank you!

@DoresoomReviews

9 ай бұрын

Glad I could help!

Cool. Good tips good info and good review. Thank you for the safety glasses info. NASA logo was a neat project.

@DoresoomReviews

Жыл бұрын

Thanks, glad you liked it!

I have a Creality Falcon. I just received the X-Tool case for the D1 and I believe they have redesigned the case. The front has a dip in top, but I flipped it over and didnt have to cut out anything. It fit perfectly as well. I also highly recommend the 500mm x 500 mm from Two Trees. I tried the 300 and 400 mm sizes but felt they were too small. The Two Trees honeycomb is also steel and doesn't discolor or crumb under pressure.

@DoresoomReviews

Жыл бұрын

Yeah, I flipped over that front panel initially, but wanted a better seal so I ended up doing the cutout. Thanks for confirming the Two Trees 500x500mm honeycomb fits. I wish I had bought that one myself!

Very helpful video, thanks! Is there an attachment available to do things like tumblers, water bottles, etc?

@DoresoomReviews

Жыл бұрын

I don't know of a rotary attachment that Creality sells. You might be able to buy a third party one and figure out the motor pinouts, but you likely wouldn't have any support if you get stuck.

Hi- I think the air assist is in backwards- mine came with a leaflet to have the air assist pipe going over the laser warning sticker- this means no gap in the red cover at the front (safer) and also improves lifting the silicone hose up off the table. Thanks for the recommendation on the glasses!

@DoresoomReviews

10 ай бұрын

Thanks - mine came with zero instructions so I just had to guess!

Thanks for the great video. I just purchased this model and will be setting it up shortly. I'm planning on making stacked items similar to your NASA project. Were the boards for that solid wood or plywoods? What thickness were they and what wood suppliers do you use?

@DoresoomReviews

Жыл бұрын

The boards were 1/16" thick solid hardwoods. I got them at Ocooch Hardwoods: ocoochhardwoods.com/scroll-saw-lumber/ They've got a great selection of thin hardwoods and laser-safe baltic birch plywood, and shipping was really reasonable.

what enclosure did you use to put the falcon in? was it the xTool one?

@DoresoomReviews

Жыл бұрын

Yes, it's the xTool one: amzn.to/3VvWqxK I did have to cut into the side to make it work, but it was the only pre-made hard sided enclosure I could find. Just know that their viewing window doesn't have a specified optical density or wavelength rating. (Neither do any competitors.) I bugged their customer service until engineering confirmed it didn't have a rating associated with it.

@3rdPedalMedia

Жыл бұрын

@@DoresoomReviews np thanks for being thorough, you only had to cut for the control box or when you say the side had to cut elsewhere?

@DoresoomReviews

Жыл бұрын

@@3rdPedalMedia Just the one cutout for the control panel. I did it with a box cutter.

I have this version of Falcon2 but I can't find support for MAC OS anywhere. LightBurn has nothing from Creality listed.

@DoresoomReviews

5 ай бұрын

Sorry, I've never owned a MAC, so I can't help you there.

Can we trust when sellers on Amazon say that their goggles are OD6 certified, or do we have to order off-site?

@DoresoomReviews

Жыл бұрын

I can't say for sure. One sanity check is that certified glasses will have the OD rating and wavelength written on the corner of the lenses, per the CE standard. If they don't have that, you can be sure they aren't certified. I suppose a company could easily forge that though.

@DirtyPlumbus

Жыл бұрын

@@DoresoomReviews good info anyway. Thanks

nice Excellent. Could you please share the model and files from where we can download and test them on our machines? Thanks in advance

@DoresoomReviews

Жыл бұрын

The eagle/falcon test file is on the micro SD card that Creality includes with the laser cutter. The box template generator is here: www.festi.info/boxes.py/

Do you have a link to the Honeycomb bed you got?

@DoresoomReviews

Жыл бұрын

It's this one: amzn.to/3w4KUyG It still doesn't take up the entire cut area, since the border is about 0.75" wide. I've been happy with it for the most part, but I might have considered this one instead for covering the ENTIRE build area: amzn.to/3GJxddq

May have a logo vector file you may be interested in if you want it!

@DoresoomReviews

Жыл бұрын

I would love to have the OC patch too!

I want to know what's in that box outside the laser

@DoresoomReviews

Жыл бұрын

The box on the front of the frame? That's where power and USB-C plug in, where the on/off switch and the start switch are, and where the microSD card plugs in.

Which type of wood is best for Engraving

@DoresoomReviews

8 ай бұрын

You can use whatever you like. Light colored woods like maple or baltic birch plywood will show the best contrast though.

I like your review and you seem very experienced and knowledgeable about lasers. I would like your advice please. I have zero experience with lasers but I think one could be useful in my knife making hobby, especially for engraving a makers mark. I watched your Creality falcon 10 w review and a Longer Ray 5 10W review. Both look terrific. Creality is on sale now for $255 reduced from $359.The Longer Ray 5 10W is also on sale now for $320, down from $519. Which one do you think would be best for me considering my inexperience and main use putting a makers mark on steel knives and maybe decorating the leather sheaths ?? Ease of use and short learning time are important to me also. Functionality and good customer support are also impirtant. Please offer your advice. Thank you.

@DoresoomReviews

8 ай бұрын

I don't know anything about the Longer Ray5 brand. Creality on the other hand is an established brand that I've had good experiences with. Therefore I'd pick the Creality laser.

Can we engraving on powder coated flasks

@DoresoomReviews

Ай бұрын

Yes, it should be able to handle that just fine.

What air assist is used?

@DoresoomReviews

Жыл бұрын

It appears to be a generic unbranded one that I think Creality is planning on slapping their name on. I couldn't find it for sale on their website yet. Just searching Amazon for "laser air assist pump" returns about 6 brands that look exactly the same.

@BrandonGroves84

Жыл бұрын

@@DoresoomReviews awesome thanks

@DoresoomReviews

Жыл бұрын

@@BrandonGroves84 Looks like they finally have it up on their website now: store.creality.com/products/cr-laser-falcon-air-assit?aid=yt10Doresoom

Granite engraving possible?

@DoresoomReviews

Жыл бұрын

I haven't tried it myself, but I've seen quite a few examples of people engraving on dark stone or slate after coating it in lacquer first. Pretty much anything you can find an example of someone doing with a 10W laser, you should be able to do with this one too.

@sensei2203

Жыл бұрын

@@DoresoomReviews thanks for giving your precious time mate

it's pronounced wen-geee...or wen-gay 😂😂. really cool nasa logo. those hardwoods looks way better than stained woods👌🏻

@DoresoomReviews

9 ай бұрын

Thanks! I figured the fastest way to find out the correct way to say it was mispronounce it on the internet and wait for someone to correct me! 🤣

10w as powerful as it gets? exept there are 20w lasers everywhere and a 30-36w about to come out by the end of 2022

@DoresoomReviews

Жыл бұрын

"just about" were my exact words. At the time I made the video, the only non-sketchy 20W diode laser I was aware of was the xTool D1, which had launched just a few months prior. By far the most common max power offerings were 10W.