*FINALLY!!* A video that at least fully demonstrates what the manual doesn't, and ironically...without a wordy explanation! Your video is head and shoulders above most of the other "unboxing" tutorials that completely skip over the details. Like setting up the spooler, for instance - I couldn't figure out what the hell the manual was saying, and all other "unboxing" videos (so-called) simply skipped that part. I appreciate you taking the time to show it, and so distinctly, at that. 10/10, would stay here again.

Got a CR10S Pro from Newark, it turned out to be a V1 (capacitive sensor). The whole V1/V2 thing is confusing, Creality is still selling both and hard to tell which one you're getting. Several serious QC problems out of the box, including wrong/incorrectly installed/broken parts but rather than send back and wait God knows how long, fixed it myself. After a few weeks, still trying to find best way to remove prints. Despite what other videos say, alcohol does nothing, bed in fridge doesn't help. Despite great care, scraped the bed using included putty knife. Tried raising Z offset to *just enough* adhesion might be the trick. Have 2 Ender 3 pros at home that work great, very few problems, but CR10S has been real pain.

hi. which is better the vyper or cr10s pro v2? since vyper is coming with the magnetic plate and the rest is the same. what is your recommendations?

Really great vid but you should over lay with text describing what you are doing. The part with the little flat twinkie shaped thing was confusing. Maybe you were leveling each side to match?

I wish the gantry on the one I bought sat down that easily on the frame. The sides were too tight. Had to run the z-axis all the way to top to get it to fit. Then the roller wheels were super tight of course. Still not sure I have it set up correctly due to this.

It tried leveling all four corners evenly and no matter how much of the same light resistance I had in all four corners using that metal tool the nozzle would always touch the base in the center. How can you fix that?

when mine that the same CR10s pro v2 I cant seem level the center of the bed but all four corners are leveled perfectly, I used t a measuring stick too see any gaps but it doesnt shows any gaps so does it matter too level the center of the bed ???

Just got my new printer, started assembly. Got to step one for the Gantry Frame Installation. I've got all the parts but the frame itself doesn't slot in on both sides so therefore the M5X25 Screws don't line up and can't secure the frame to the base. Am I doing something wrong or is it just faulty?

Otro problema que observó en esta impresora es el sistema de lectura de la SD, no admite caracteres ni nombres de más de 8 letras.ni presenta los directorios. Tengo una Ender 3 y no tiene ese problema, ¿sabe si hay alguna solución para esto ?. Un saludo

Thank u for the video....how long it took to print that item..??

My heat nozzle keeps going through the bed even when setting z home to 0.2 above bed with the feeler. very frustrating. any ideas how to fix it?

Hello, I have a Creality CR-10S Printer that I can't get to print. The z Axis goes up and down when homing but won't When Printing. It just stays on the first layer. Is this a printer problem or am i doing something wrong in Cura ?

Uzun zamandır yoksunuz. Cnc yapacak mısınız? Videonuzu bekliyorum

Excuse me, i just got one of these 3D printers and i need to adjust/align it. Im missing the 2 tools ur using to make mine work properly, is there any link u can send me or name to get the exact same tools u are using? Thank u and id very much appreciate it

hocam bu bl touh her defasında 10 dk ölçü alıyor, bunu azaltamaz mıyız, mesela küçük çıktı alıyorum 5 yerden ölçüm alsın, yada bu ölçümü kaydetme olayı var mı? teşekkürler...

Where do I get the piece of lexan

So I don't have the set up tools where do I get replacement list

Benim bir sorunum var ve birturlu alamadım bu sorunu. 10s pro v2 sahibiyim. Tabla ayari yaparken farkettim tablanin orta noktasındaki nozzle yuksekligi ile kenarlardaki olcum noktalarına gelen nozzle yuksekligi farklı. Orta kısımda kağıda sifir ayar çekiyorum kenarlara geldiğinde tabla yukseklik ayarlarımi yaptıktan sonra ortaya geldiğimde kenarlar ile orta aynı yükseklikte olmuyor. Acaba benim tablamda mi yamuklik var orta nokta dahami havada diye ters çevirdim aynı. İnanmadım gittim cam kestirdim defalarca ayar çektim gene tablanin orta noktası diğer köşe noktalardan daha havada. Boyle olunca kenarlar daha havada kaliyor ve yazdırırken sorun yaşıyorum. Bende cozum olarak tüm tabla ayari bittiğinde z eksenini orta noktaya göre ayar yapıyorum. Bununda şöyle bir de avantajı oluyor orta noktaya denk gelen obje aşırı yapışıyor tablaya , kenarlara denk gelen obje ise normal yapışıyor tablaya. Bunun sebebi nedir normal birseymi z ekseninin orta noktada bir tik daha yukarıda olması?. Normal değilse nasıl düzeltebilirim.

didnt you get fillament in the box ? i did

At 3:49 it shows you connecting a long black connector and a small white one with it. I have that, but there is no where to plug the white part. I’m so confused rn. Any ideas?

@JokerZeSmoker

Жыл бұрын

Update: Wow.. found it, had to bend the black box covering it to find it lodged with other cords. Hope this help anyone that had that same problem

I am having the same start behavior as seen on 15:05 where it does the purge lines in a triangle instead of side by side. Did you fix that already?

@TheUpwardSpiral

4 жыл бұрын

If that was with a test print on the SD card that's just for that print. If it's for all your prints it'll be your start G code that needs altering

Do you know how to get thermal runaway protection for the CR10s pro v2?

@prinklesnonprogaming3668

3 жыл бұрын

me too

@CatFoodDraino

2 жыл бұрын

Use octoprint

Merci pour cette vidéo, elle m’a bien aidé 😉👍

Slt tu peut me dire les dimension de l'imprimante pour savoir quelle place elle prend

Where did u get tour files?

What is the actual footprint of the base?

Why don't you pre-heat bed and hotend before manual leveling?

@gluintar

4 жыл бұрын

The BL touch sensor will adjust for the small differences made by heat.

Buen.vIdeo, yo tengo la misma impresora, pero me ocurre lo mismo que con la que tiene el capacitador inductivo (CR-10SPRO), cada impresión tengo que calibrar el offset de z. Tengo todo perfectamente calibrado como indica en su vídeo. ¿Uste no tiene que calibrar la impresora en cada impresión?¿Como podría solucionar. el problema? Además si hago varias mediciones automáticas de la cama seguidas, me salen valores diferentes. No se que puede pasar pero es una lata tener que estar pendiente en cada impresión de calibrar el Z.

@robertrediaz

3 жыл бұрын

Hola @Fede SL, lograste solucionar los problemas?, estoy pensando en comprar la misma impresora

10:30 so what's the point of the BL Touch and what part of the "auto bed leveling" feature is "auto" if you still have to manually adjust the height of each corner? I wanted to buy a self-leveling 3D printer so that I wouldn't have to trust my own "opinion" on what "feels" leveled. From where I see it, it seems like an added step to the already daunting task of leveling.

@nsw8148

4 жыл бұрын

You set it the first time and the BL Touch compensates for the rest of the prints. I've got one on my Ender 5 Plus and I have manually leveled it in a month or so.

@everythingmattersetm3559

4 жыл бұрын

The BL touch checks before every print and Changes the heigh in different places so the mountain in the middle of the bed does not matter

@kaloalex

3 жыл бұрын

"Bed leveling" is a misnomer. Or a lie, depending on how you look at it. The BLTouch figures out the differences in elevation across the surface and then the controller actively compensates for the variances while printing. At no time does the bed ever get 'leveled' after the gross adjustments you make during your initial calibration.

@remowo_

2 жыл бұрын

The way I think about it is this: you manually bed level before the print as always. Your 6,8,10 hour print begins. After 3 hours or so your bed might need a minor manual leveling because of the shaking. So how do you solve this problem? Do you risk stopping the print and resume? I think this is where the BL touch comes in the field and compensates for this issue and gives a great result for long hour prints.

If I don't have the tools at unboxing what should I do

So I’ve been very confused with trying to get mine to print level and consistent do you set the z offset in the center first before leveling the corners?

@imaplayer1624

3 жыл бұрын

This printer auto levels duh

@Warhorse469

3 жыл бұрын

you should always manually level all 4 corners with the wheels the best your can before using the Auto leaving there is only so much auto leaving can fix

@jrpaz173d2

3 жыл бұрын

Just bought one. Powered up and red light is flashing. Does anyone know what this means? New to this and a lil overwhelmed.

@war3zlod3r

3 жыл бұрын

@@jrpaz173d2 usually that means something is tripping the BLTouch, make sure the pin isn’t bent or obstructed

@jrpaz173d2

3 жыл бұрын

@@war3zlod3r for it stopped blinking after height adjustment

Merci ! Ça m'a bien aidé!

ANyone else have the issue of the bl touch going home and leaving the nozzle 3-4mm from the bed? Seems like it should be on some kind of adjustable sliding mount to be able to slight down or up slightly.

@Bushido_90

2 жыл бұрын

You have to set the z-offset to compensate. All the BL-Touch does is meassure its own position in relation to the bed. The nozzle is by no means related to this, it can be at, above or below the BL-touch sensor height and this value needs to be manually adjusted. It's really easy on this machine though, while printing go into adjust (lower rigth corner) and there you'll see z-axis adjustment. Lowering this value will lower your nozzle towards the bed, and it can be quite a substantial adjustment before your printer starts to behave. I have mine set to -1.50.

The z axis goes too far down on the bed and the nozzle starts hitting the bed and scratching it please someone help me calabrate it ive tried everything

I just received my CR 10S Pro V2 yesterday, and it won't do a damn thing. The Z axis on the screen shows that it is going down, but, the damn thing is going up instead of down. I don't think that I messed up when I hooked up the wires. It won't even go down to the build plate, at all.

@stehenallein

2 жыл бұрын

Did you plug in the 5 pin connector coming off the ribbon cable to the x-axis stepper motor?

@paulfielder336

2 жыл бұрын

@@stehenallein yep

i've only just gotten to hooking up my z-axis steppers. Creality QC sucks, mine had a loose wire hanging unattached to the harness. What really strikes me here is the music. I normally hate the music people put in KZread videos, but this is just great. I am still pissed at Creality, but whatever, let's keep going.

Just got my first 3d printer it was this one. I'm surprised that there are no "maintenance videos" on what you should do and how often. And I don't understand why I have to level the bed every damn print. Both manually and then it does it automatically when I start to print. Tried going with E-PLA but that just made every print fail and not getting stuck on the bed. The bed that loses its surface when I use the tools to remove the prints once done. I don't know if I'm dumb or the one who designed this printer is dumb

@bretspangler8717

3 жыл бұрын

You can turn off auto leveling, then it will stop doing it every print, as a first time user you made a great choice, as far as maintenance goes, you need to keep the head clean and the rollers running smooth, plenty of videos out there, nothing complicated, eventually you might have to replace a belt or other moving part.

@ryderthechallenger2788

Жыл бұрын

I just got this one today!! Tutorial is confusing

Just got my CR10s it won't print anything, it does everything but it sits in the top right corner and says printing but does nothing....

Merci, comme beaucoup ça m'a bien aidé, la notice manque cruellement d'information et je ne parvenais pas à imprimer. C'est chose faite grâce à toi merci

Can I use the cura settings in this vid for a creality car 10?

@isaiah7141

4 жыл бұрын

Creality cr 10*

I cant install spool holders

Got one of these and right out of the box the nozzle would crash into the bed.

I'm seriously considering buying this printer, however I haven't seen many reviews out for the V2. Have you come across any serious problems with the V2? Like adhesion, bed leveling/flatness, issues with the BL touch, etc.?

@DeathCoreGuitar

4 жыл бұрын

I've got it for a few weeks now, this is my first printer Adhesion- Some prints were stuck so much, i barely removed them (it's because i leveled bed pretty alright) I even scratched the bed with included shovel (?), for some reason it has sharp, not refined edges Bed leveling- It's alright, pretty comfortable with big knobs, just be patient and level the bed correctly But, one of the leveling springs not long enough, so it must be really relaxed to level the bed, that's why it can mess up level after some time because of vibrations (I will buy a set of springs in the future and maybe everything will be okay) BL touch- I didn't bought it The main thing in the beginning- Check all the screws and tight them, and then level the bed perfectly I printed something like 8 models now, some of them not great because of bad slicer settings (i'm still learning, and got okay results only from Creality slicer) Honestly, i think ANYCUBIC has nice new printers and they have 0.05 layer, not 0.1 so it's twice as accurate (?) And main thing If you need big prints- go for FDA printer, also you need to polish and refine print afterwards But if you need small print with lot's of details, you need to buy resin printer, and you almost don't need to polish the model

@everythingmattersetm3559

4 жыл бұрын

I had a same problems but after we fixed the printer it works great and is very quiet

@darbycarpenter3032

4 жыл бұрын

@@DeathCoreGuitar I just got mine a few days ago. I know what you mean about the adhesion. I already scrapped up my bed as well. I am playing with the bed temperature. I had it set at 50. I put it to 40, Some PLA stuck and some didn't. I am printing now at 45 to see if that is the sweet spot. With all that said I just ordered a glass bed for 20 bucks from ebay so I don't have to deal with scrapping up the original bed.

@mikecyberey3586

4 жыл бұрын

I bought this printer because it looked like the flagship from Creality, and I had good results using the Tevo Tornado clone of it. There are a few issues I have, there is a bit of mystery on how this printer handles GCODE. It will not follow your GCODE with respect to auto bed leveling and priming, at least when using the touch screen interface. You cannot define your own priming pattern, it will always prime the print head in a pattern that ends on the center of the bed, this is seen at the 15 min mark on the video. There is also ambiguity on how it auto-levels. It will run the auto-level sequence regardless of having the G29 line present. When I first received the printer, I leveled by bed by hand, ran the auto level function in the menu, and added G29 to my GCODE. The extruder ran into the print bed on one side, and ruined the build surface. It could have been a fluke, or it could be that it is double compensating for the auto-leveling if you add the G29 command and auto-level using the touch screen. It has been hard for me to print something with a large footprint and have it be perfectly level. I have since switched to a glass build surface. The printer is also very loud due to the fans that cool the power supply and mother board, much more so than my TEVO clone. While it isn't a terrible printer, for the price they are charging, I would have thought the quality would have been better. I am hoping a firmware upgrade with solve the issues I am having. If you don't mind installing a BLTouch yourself and upgrading the firmware, the TEVO is a good cheaper option, I got mine for just under $300 on a banggood sale.

@DeathCoreGuitar

4 жыл бұрын

@@darbycarpenter3032 I've got a nice trick for removing the print now Just use the utility knife blade, push it under a corner of a print and then push it further with included shovel thing, and it's working very nice But, my biggest issue is leveling my bed, I'm leveling it very nice, but adjustment nuts are very loose in leveled up state, so mid print and after the print it's just not leveled up anymore So I need to level the bed EVERY TIME I don't know how to fix this I could tighten the nuts and adjust Z sensor height, but my Z sensor is FIXED For some reason some of the KZreadrs got not fixed ones, so they can tighten all nuts, adjust Z sensor, and level up the bed, and their bed is leveled for almost a month they say Sorry for my English btw

Ellerine saglik

@starmeyproductions

3 жыл бұрын

Merhaba

Frustrated my Z axis seems to want to go higher

Bende de anycubic i3 mega s var montajı çok kolay

Dude you have to cut the dead time out

I like he just skips past actually getting the gantry level lol

@Oliver-ke5es

3 жыл бұрын

Took me like 30 min eventually I literally had to pull one of the sides into place 😩

Fark... you must have received tho only one in the whole world that works out of the box!

@Rob5ft19in

4 жыл бұрын

I'm considering buying one - are you able to expand on that comment as it might change my mind?

@MrFastFarmer

4 жыл бұрын

@@Rob5ft19in It's a piece of shit mate. It requires heaps of farking around to get it decent. I'm currently waiting for a new motherboard but of course nothing is shipping from China.

@deepm4124

4 жыл бұрын

@@Rob5ft19in yeah, I’ve been 3D printing for about 18 months, and what they don’t show you in the video, is the cutaway where they swap the benchy from another printer like a PRUSA lol. This thing has got to be one of the most finicky printers I have ever used. Their implementation of BLTouch on the CR10S PRO V2 is the biggest joke. Tech support told me you must level the bed between each print (WTF ???) and that because the BLTouch is so inaccurate, that this is expected behaviour. They have also told me they do not provide copies of their source code because it is NOT open source. Marlin anyone? Lol. Yet in this video, within 10 mins, he has it setup and printing flawless benchies ..... thank god Amazon CS is so great, I’m about to box mine up and ship this piece of junk back. I used an Anycubic i3 mega S for awhile and a printer that costs about 1/3rd the price with none of the fancy add ons gave results that were at least 100x better in every single way. I decided to move to something bigger and first ordered the Anycubic Chiron, but I had something I was working on and needed it quickly, so I bought this, biggest mistake ever and I’ve been farting around with it for over a month. Tech support responses often make you want to smash your head into a wall. You wait for 2 days for a response to a pic of your bed mesh level showing the greatest variance of like 0.08 and the answer you get is “please level your bed” and a link to this video to show me how to do it!!!!

@medyaye

4 жыл бұрын

i received mine 2 weeks ago and i follow this video to make my first 3 print ever. Worked fine. I only have one bug for nose temperature from cura is not recognized but i must tryanother slicer to see if cura is not responsible for that bug. I set the nozzle temperature manualy from the 3d printer.

@samo1.060

4 жыл бұрын

It works good for me

Not all of us believe in fairy tales mate

anyone knows how to take down the prints easily?

@leopoldgirard1852

3 жыл бұрын

You have to wait because the bed have to cool down and i hope you didn't put a raft because if you did the print will be impossible (really hard) to take down 😉

@lesliestandifer

3 жыл бұрын

buy a flexible print bed

Some audio commentary would have been more helpful than repetitive muzak.

je comprend absolument rien . quand je fait return home elle monte sans arreter .

i am having the worst time with this machine, i cannot get the z axis level no matter what i do. it will never stay level and if i use the auto home or auto level function it just comes down until the nozzel is forcing into the pate and trys to destroy itself. horrible horrible experience with this thing

@V8ToYy

2 жыл бұрын

i literally have to pull the power from the wall quickly to stop it from utterly destroying itself

Jesus with the ads

why does a self leveling printer require a 10cm piece for setting it level ?

Ce qui m'intéresse, c'est des avis personnels et des commentaires, pas juste des images. Cette vidéo est inintéressante pour moi.

Yav isin rast gelsin yoksa kirip atacaktin sinirden makinayi

Idk

Why make a video if you're going to skip steps and not talk through your steps?

@pcostel1

Жыл бұрын

Turn on captions

How easy this was for you is depressing, its taken me weeks and mine still doesn't work. AVOID CREALITY

@war3zlod3r

4 жыл бұрын

I’m having a lot of issues with mine too I just recently filed for a refund because I couldn’t get consistent leveling

@michaelarenas9185

3 жыл бұрын

I really hate this printer right now . the Dual z rod is such a pain in the ass to sync up

No instructions, no text...no help. Cheesy music too.