Craftsman 10" Radial Arm Saw 113-196321
Ғылым және технология
CRAFTSMAN 10” Radial Arm Saw
View eBay Listing: www.ebay.com/itm/132614849671
Small Tools Inventory #: S21808
Brand: Craftsman
Type: Radial Arm Saw
Model: 113.196321
Serial: 98340P0378
Blade size: 10”
Blade travel in and out: 16”
Blade pivots: 0 to 90 degrees
Blade tilts: 0 to 90 degrees
Arm rotates: 0 to 60 degrees left; 0 to 60 degrees right
Blade adjustment up and down
Table size: 27” x 40”
Condition: Excellent
HP: 2.75
Volts: 110
Phase: Single
Small Tools Inc.
26470 Lakeland Blvd.
Euclid, OH 44132
United States of America
We buy and sell new, used, and reconditioned machinery and tooling.
(800) 821-2674
(216) 732-5980
sales@smalltools.com
Website: www.smalltools.com
eBay Store: www.smalltoolsinc.com
Пікірлер: 33
100% made in the USA 🇺🇸 They don’t make ‘em like that anymore.
Same as the Rigid RS1000 both made by Emerson electric.
Thank you for posting I have the same saw I didn’t know how to pivot saw awesome video Thanks again
Thank you
Thanks so much😁
I kept waiting for him to say, "Da Bears...."
@dklein8494
4 жыл бұрын
Jesse Wright I just spit coffee out laughing
@toonybrain
3 ай бұрын
😂😆🤣
👍👍👍👍👍
Que problema puede tener se paga en funcionamiento y después no se puede incender 😊
how much for a second hand of this unit?
The saw can be wired for 240 according to another video commentator.
@billymurphy3
Жыл бұрын
The old manual shows how to flip from 120 to 240/240 to 120
How do i mount the table
Does anyone know how to add or remove the sanding drum? I can’t get my drum off. The red button doesn’t seem to lock the blade. Thanks
I raised my blade and now it wont go down... How do I fix that?
Can this be wired to 220 v?
When you turn that crank to raise and lower the blade, a threaded nut holds the plastic sprocket in place. My threaded nut fell to the floor. Does anyone know how to get the internal threaded rod to come down to thread that nut back onto it? Thanks!
I just got a saw just like this one. That handle on the top seems stuck in the unlocked position. Does anyone know how to fix that?
@deacondave8473
2 жыл бұрын
Ok
What can I do to stop mine from wobbling left to right?
@Izza_GlitCh
3 ай бұрын
1:25
@bobbg9041
15 күн бұрын
Look for an owners manual for that machine mine is newer, and i do not know what you mean about wobble. Angle change whole machine head tilt I've got no clue. If the unit is locked at 90dgr and the lift pole rocks you can tighten the part that holds the raise pole that helps it stay straight. There is a set of ways and things to adjust to make to cut true you really need the owners manual Adjustment points on each machine are different depending when it was made. It also shows how to set it up. You might be able to download it online. Just search model number.
Hi Im looking for a manual for this saw any body have one
cherche reset swich pour moteur model c48bd 103
A mi jorge please
My reset button won’t reset
That blade on that saw is extremely dangerous. It is a positive rake blade it should be a negative rake. Bassicly the blade will bite into the work and cause kickback. Use the same type of blade labeled for a miter saw. Just like mills and lathes each machine uses a type of cutting tool for feed, and speed, that is a ripping blade for a table saw. It should not be on a RAS Radial Arm Saw, just like a Radial Arm Drill. RAD. Yes i worked in a machine shop. You put the wrong blade on that saw it can take your arm off it it gets away from you just like any machine in the shop. Just because its wood don't mean it can't hurt you. Get blades with carbide teeth. You know about carbide over HSS cutting tools. What 3" dia 6 cutter Would you rather use on a mill to take off 100 thou HSS or one with carbide inserts? The carbide will take deeper cuts and stay sharpe Or you can spend 1/2 an hour every pass to put a new edge on your tool If you try to take 100thou pass.
Video production poor. Presenter didn't dress for the show. Voice not loud enough. Framing and composition poor. Camera jerky jerky. No coordination between presenter (blocking view, not waiting for camera to get there) and camera operator. No use of editing to make things understandable. Poor demo of adjusting blade guard and how it accommodates to stock thickness. No demo of dust collection. 4th grade video class does better.
@briankleinschmidt3664
8 ай бұрын
Yeah, I can't take you seriously in that greasy shirt. He seemed aware of it, too. You could have just changed shirts, ya know.
@timnevinger5056
4 ай бұрын
Settle down Charlie.
@mikemurphy7711
3 ай бұрын
This is amateur video making you idiot, you get what you get, if you want professional videos GO TO CBS, ABC, NBC and so on to watch their productions!!
@danielwaynekuehne
2 ай бұрын
lol who the fuck is this guy😂😂😂