I'm here with a 318i seeing these comments, shows me I'm still fighting the good fight 😂😂😂😂
@alexbucher5627 Жыл бұрын
there is a much easier fix for this - just add two additional screws left and right of the lock latch and the gap is gone - holds my glove box together since many years
@danc2014 Жыл бұрын
The box is not fixed until you have a working light.
@S1ckbg Жыл бұрын
if you don't have a sagging gloves box are you even driving e36 bro :D if your whole interior is squeaking you get extra street cred
@DalyDriverTV
Жыл бұрын
Bro, the door cards are self-lightening
@DangerousDaedric
Жыл бұрын
Mine fell off
@MR-bz5ye
Жыл бұрын
Facts
@matthewcativo303 Жыл бұрын
does anyone know if the plastic piece that covers the airbag pops off? the one on my e36 has a dent in it
@cashiefisaacs38152 жыл бұрын
Intro is a bit long yeah but the video is darn good bro. Subscribing because you defs have potential. Keep it up.
@cooldoctor1745 ай бұрын
This guy is funny 😂
@matt75hooper Жыл бұрын
Great video. Have you ever replaced the climate control power module under the OBC ? I can't get it out yet its as shaky as a bad tooth. Don't want to break it just swap it out. Thanks.
@DalyDriverTV
Жыл бұрын
I have not, check out my radio install video for something adjacent. I think the cubby isnt hard to pop out and you go from there.
@matt75hooper
6 ай бұрын
I got it out. What a pain. I tried 1k angles. It finally slipped out with no room to spare.
@jw2002 ай бұрын
How to fix the soft opening or how it should work? Mine just drops open. I dont think its normal
@DalyDriverTV
2 ай бұрын
I'm not sure yes there is a soft opening I think I greased the mechanism while I was in there. Worst case scenario just get a new salvage part
@benf4246 ай бұрын
Do you know the part numbers for the 3 screws at 1:45? I am missing some screws on mine.
@DalyDriverTV
6 ай бұрын
sorry I do not, maybe check Realoem.com or find a parts car. Thanks for watching!
@benf424
6 ай бұрын
Cool. Nice video by the way.
@ismailbeygirci93942 жыл бұрын
never seen e36 without saggy glovebox tho... fun fact one of the bmw dealers here has avus blau m tech 320i sedan with 1000 km at most and it still has saggy glove box lol
@crisl9518
Жыл бұрын
I've got 220k miles and no sag
@notphew728110 ай бұрын
You know the e36 is reliable if the glove box is falling apart
@gregjennings1 Жыл бұрын
new friend have a great day
@nersisyan4468 Жыл бұрын
BMW💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞
@quackduck22011 ай бұрын
At 6:09 you state the cylinder has to be between locked unlocked to remove. I don't think this is correct and I'm genuinely curious where you got this information since I don't see it anywhere else online. I removed two cylinders this last weekend: one from my old vent panel and one from a junkyard one for which I did not have the key. The former I removed in the unlocked position. The latter, I picked and locked and removed in the locked position. In another video (kzread.info/dash/bejne/lWp6mKuKgLLUn84.html) the cylinder seems to be removed in the unlocked position. The actual hard part of this task is spreading the tabs to enable the lock cylinder to come out. I used a flathead and twisted it then inserted a toothpick or sewing needle in between the plastic tab and the cylinder. I recommend wrapping the flathead in tape to avoid mangling the plastic.
@DalyDriverTV
11 ай бұрын
interesting glad you found a step to skip. It was good to practice spreading the tabs on my original glove box in preparation for the keeper. Thanks for watching!
@DalyDriverTV
2 ай бұрын
was it to keep the inserts in the tumbler from falling out?
@DangerousDaedric Жыл бұрын
Mine fell off
@DalyDriverTV
Жыл бұрын
Before or after your door cards 😂 😂
@theraven5072 жыл бұрын
And it still sags 😫💀
@DalyDriverTV
2 жыл бұрын
I know. But slightly less!
@philipsavenkovsavenkov38552 жыл бұрын
Intro too long and unnatural! Be yourself you have lots of potential!
Пікірлер: 32
E36 is my favorite BMW chasis 👍🏻
I'm here with a 318i seeing these comments, shows me I'm still fighting the good fight 😂😂😂😂
there is a much easier fix for this - just add two additional screws left and right of the lock latch and the gap is gone - holds my glove box together since many years
The box is not fixed until you have a working light.
if you don't have a sagging gloves box are you even driving e36 bro :D if your whole interior is squeaking you get extra street cred
@DalyDriverTV
Жыл бұрын
Bro, the door cards are self-lightening
@DangerousDaedric
Жыл бұрын
Mine fell off
@MR-bz5ye
Жыл бұрын
Facts
does anyone know if the plastic piece that covers the airbag pops off? the one on my e36 has a dent in it
Intro is a bit long yeah but the video is darn good bro. Subscribing because you defs have potential. Keep it up.
This guy is funny 😂
Great video. Have you ever replaced the climate control power module under the OBC ? I can't get it out yet its as shaky as a bad tooth. Don't want to break it just swap it out. Thanks.
@DalyDriverTV
Жыл бұрын
I have not, check out my radio install video for something adjacent. I think the cubby isnt hard to pop out and you go from there.
@matt75hooper
6 ай бұрын
I got it out. What a pain. I tried 1k angles. It finally slipped out with no room to spare.
How to fix the soft opening or how it should work? Mine just drops open. I dont think its normal
@DalyDriverTV
2 ай бұрын
I'm not sure yes there is a soft opening I think I greased the mechanism while I was in there. Worst case scenario just get a new salvage part
Do you know the part numbers for the 3 screws at 1:45? I am missing some screws on mine.
@DalyDriverTV
6 ай бұрын
sorry I do not, maybe check Realoem.com or find a parts car. Thanks for watching!
@benf424
6 ай бұрын
Cool. Nice video by the way.
never seen e36 without saggy glovebox tho... fun fact one of the bmw dealers here has avus blau m tech 320i sedan with 1000 km at most and it still has saggy glove box lol
@crisl9518
Жыл бұрын
I've got 220k miles and no sag
You know the e36 is reliable if the glove box is falling apart
new friend have a great day
BMW💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞
At 6:09 you state the cylinder has to be between locked unlocked to remove. I don't think this is correct and I'm genuinely curious where you got this information since I don't see it anywhere else online. I removed two cylinders this last weekend: one from my old vent panel and one from a junkyard one for which I did not have the key. The former I removed in the unlocked position. The latter, I picked and locked and removed in the locked position. In another video (kzread.info/dash/bejne/lWp6mKuKgLLUn84.html) the cylinder seems to be removed in the unlocked position. The actual hard part of this task is spreading the tabs to enable the lock cylinder to come out. I used a flathead and twisted it then inserted a toothpick or sewing needle in between the plastic tab and the cylinder. I recommend wrapping the flathead in tape to avoid mangling the plastic.
@DalyDriverTV
11 ай бұрын
interesting glad you found a step to skip. It was good to practice spreading the tabs on my original glove box in preparation for the keeper. Thanks for watching!
@DalyDriverTV
2 ай бұрын
was it to keep the inserts in the tumbler from falling out?
Mine fell off
@DalyDriverTV
Жыл бұрын
Before or after your door cards 😂 😂
And it still sags 😫💀
@DalyDriverTV
2 жыл бұрын
I know. But slightly less!
Intro too long and unnatural! Be yourself you have lots of potential!