Good thing you have all of us experts here in the comments to correct you all the time

@vehcor

3 жыл бұрын

I learn so much from the experts! lol

@billpar

3 жыл бұрын

@@vehcor you are the best

@SalvageMasterEssex

3 жыл бұрын

@@vehcor Well, like they say, nobody is too old to learn Lol

What a nice truck it turned out to be. There has to be some real satisfaction in turning a wreck into a nice piece again.

@vehcor

3 жыл бұрын

It is my favorite truck so far and making nice things out of junk is my favorite part of all the builds. It is why I enjoy the work. Thanks for the support.

I've used a rain coat to wash like that, but when the life jacket came out I lost it 🤣🤣🤣🤣

Dude you crack me up about GM using all their fasteners. Seriously, you missed your calling comedy should be your next career! Keep up the entertainment!

@vehcor

3 жыл бұрын

I didn't really pay attention when I was doing the work but after editing the video I was like, "Damn, there are a lot of fasteners", and there were still more! lol Thanks for the support!

@billpar

3 жыл бұрын

I agree the humor you have Scott is awesome , keep up the great work , Id buy a car from you in a second if I needed one

@Superduty_59

3 жыл бұрын

Absolutely! The humor is 50% why I watch this channel. I still laugh too hard when he screams when unloading a car off of his trailer. Every time!

@nou8257

3 жыл бұрын

Dude work on a subaru they used 10x the bolts needed to hold things my sisters turbo legacy had like 7 to 10 bolts to hold the exhaust pipe in place from the turbo and i think they had 5 small ones in the heat shield which i was able to put back with just 1.

@nou8257

3 жыл бұрын

@@Superduty_59 That is a safety scream it warns people to stand back from the trailer

They probably used a Ford to push it backwards... I died when the life jacket came out! "Done" is always a little past "works".

@lostintime8651

3 жыл бұрын

No video today?? You really need to notify us. We do have a life ya know!! lol

@vampirwrr

3 жыл бұрын

@@lostintime8651 "We do have a life ya know!!" Not everyone is a famous youtuber :-)

I lost it when you had the life jacket on while power washing the underside of the truck lol

@vehcor

3 жыл бұрын

That thing rode around in the truck for months before I got around to that part of the video. lol

you really do get an understanding as to why these things cost what they do... the amount of parts is astounding..

The swimming vest was a killer... Glad you were able to "swim" to safety and get out of the storm. Do it! Put in the sun roof and keep the Dirtnali. It's you.

@vehcor

3 жыл бұрын

That thing rode around in the truck for months before I got around to that part of the video. lol If it gets roof damage, I would have no problem adding a sunroof!

I really enjoy your videos. I ran a collision shop for 8 yeas and relate to all your stories. You put more humor in it than me tho. Keep up the good work and ignore the haters.

@hxhdfjifzirstc894

3 жыл бұрын

I can't even imagine how there would be haters for this channel. This is top tier content.

I think you might be having a little too much fun making these videos ;) keep up the great work!

@vehcor

3 жыл бұрын

Thanks! I'll try!

@clevelandmaker386

3 жыл бұрын

@@vehcor how much ya asking?

@larrybe2900

3 жыл бұрын

@@clevelandmaker386 You know, I am not a GM fan for various reasons but the styling on this truck could change my mind. The next owner will be a proud driver. Of course all because it was a nice job to make it look this way.

Your work ethnic and attention to detail is certainly inspiring. I’d buy anything you have repaired no matter how badly it was totaled

I've been watching Mustie1 put together lawn mowers while I could have been watching you put together the truck I own? This is awesome, great work. Amazing.

My week was spent replacing struts, shocks, sway bar links, window regulators, blower fan resistor, ignition coil, new side view mirrors on my 22 year old Town and Country LX. Now I'm doing the new headliner cloth.

“Anyways.... I install my trans filter” dying 🤣 the sarcasm has me coming back 🤣

I'm kinda sad to see this truck go. Such a nice pickup. My dream truck is the black duramax you sold. I just can't part with that much money. Retirement is drawing near. Thanks for sharing your talents.

@vehcor

3 жыл бұрын

I don't want to let it go but business is business.

Nice work on the "Dirtnali", I hope you keep it; it's a good truck, and it looks good on you. 👍😉

I started watching your vids. at first because of your ability. Now I think I check them more for comedy. God Bless, I wish there were more like you sir.

"Waxing cars is his job. I'm helping him." keep'em coming! Also, why are car detailers not gnomes?

@vehcor

3 жыл бұрын

Actually the roaming gnome IS the detailer. 😆

@rsprockets7846

3 жыл бұрын

Because lucasfilm has the patent rights locked up till. 2077 on the detailing. Droids

@garysimonson9593

3 жыл бұрын

"Also, why are car detailers not gnomes?" -- Different union.

Truck came out beautiful. Nice work as always.

Another great video Scott. I remain impressed with and admire your level of integrity on these builds. I realize you are videoing what you do for all to see however, I'm pretty certain even without that evidence you wouldn't change a thing. Knowing your attention to detail I wouldn't think twice about acquiring one of these vehicles from you. Keep up the great work.

Scott, love your videos and keep them coming. Humor is good as well, you’ve taught me more about a vehicle’s anatomy than I realized and I’ll be replacing my OBS Chevy rockers & cab corners now after understanding how vehicles are assembled. Thanks again Fran

Long time ago I told my kid that burnouts were mandatory if you own American cars. A few years ago, me and my now adult son visited an American car show here in the Netherlands and yes, they did their burnouts 😁 Nice bedtime video, thanks a lot Scott.

@vehcor

3 жыл бұрын

If you don't like burnouts, you are not a real car guy. lol

That truck turned out great. Awesome video as always!

Hi from the UK. Recent convert to the channel, loving the builds, loving the dry humour even more. Keep doing what you're doing, really enjoying the videos.

Love the videos. As a fellow Illinois resident, I appreciate the effort on the cavity wax. Vehicles without it do not last long in this state.

Well the afternoon crew knows what to look at for sure!

The Dirtnali is no more. Good job again!

No doubt, you do good work. Thanks for another great video..

I’ve owned several rebuilt cars, they last forever. Except the last Dodge neon I owned back in 2007, that one got hit head on during a snowstorm..

Great video as always enjoy watching your videos

Probably my favorite episode so far! I really enjoy your wicked sense of humor... wow, what does that say about me? Hell, I'm old, and I really don't care!

That's a sweet truck can't believe you're getting rid of it I have a 2016 with vent visors love it

Hard to believe it's been so long since I started watching, I think the "mistake" truck was the first build I saw (crazy youtoube suggestions) and the dry sarcasm kills me. I work on all my own junk because I can, and have to. I have picked up tons of little tricks just watching you, THANKS!! And the outakes and "what's in my console" segments are priceless. I subconsciously started saying "in the pile" whenever working on my junk, or cooking, tossing cans and scraps or whatever in the trash, so much so, my wife does it a lot now too. Cracks me up everytime.

She's looking good, awesome video bud 👍👍

@vehcor

3 жыл бұрын

Thanks 👍

Playdoughnium... I'm going to steal that one too!!!! Oh... I imagine the clean freaks are going wild when that front bumper was getting put back together... Plus... Plus... A very rare appearance of the afternoon crew! Really love the update on the Dirtnali!

@vehcor

3 жыл бұрын

One clean freak in the comments so far! 😂

Funny one...can't wait to see the next build.

Great video

Done stamp. Nice job and it should sell quick. 👍👍👍

@vehcor

3 жыл бұрын

There is a growing line for this thing. I just need to find a replacement.

Happy Easter ! ! !

I love how easily serviceable they make the Allison. 👍

Nice build

very nice great job

That’s a bad ass way to start a video 👍👍 NICE

Nice work nice looking truck 👍🏻👍🏻

@vehcor

3 жыл бұрын

Thanks 👍

Happy Easter!

Wow! Those consoles they put in those Denali's are huge! Big enough for a sunroof glass!

One big brand new truck awsome.

LOL Love the video on the Dinali. The the afternoon crew owes you a couple pizzas in your last couple videos you know. Looking forward to the next exciting build and looking forward to the 1965 Mustang conversion Build Be safe

I had a 1997 Grand Am with over 235K miles before I sold it. Did all the oil changes myself. It went trough several batteries, two alternators and a water pump. The car served me well.

I cannot wait to see your next GMC truck build!

I noticed all the dirty parts that got put back on!....but then again its is a Dirtnali!.....good job!

The life jacket moment at 28:46 was epic.😂😂👍Great videos for learning/entertaining.

@vehcor

3 жыл бұрын

That thing rode around in the truck for months before I got around to that part of the video. lol

@gheorghibaractari7489

3 жыл бұрын

@@vehcor that's some serious "planning ahead " move. Lol

Good looking truck.

@vehcor

3 жыл бұрын

Thanks 👍

Thanks for sharing. As always thanks for the Friday pick me up of laughs. Stay safe and be well.. Have a good Easter.. im sure your game for Easter egg hunts..🤣😂🤣😂🤣😂

@FlyEaglesFly19111

3 жыл бұрын

NAPA..Never Any Parts Available..one of my favorites

The scratches are from pushing MOPARs, the hooks are for when you need a tow from a Ford.

Sweet truck.

Your truck looks pretty a nice stock truck is always nice

Love the video

I think I may have mentioned this before but Jiffy Lube has moved beyond torque specs or even ugga duggas. They simply tighten the drain plug until it's friction welded now.

@vehcor

3 жыл бұрын

Those guys are always innovating! 😂

Good looking truck

More rebuild Friday’s please. What am I gonna do on Fridays now while waiting for dinner 😃😃😃

Sweet ride you are going to miss it

Scott, finally a feature-length video! None of the 12 to 18-minute shorts. Now I can sit down with a Diet Coke and a chicken salad and enjoy a feature-length rebuild completion. I can't get enough of filling doors and other panels with wax, or, for that matter, poping out and plastic body clips. Spraying the nearly entire undercarriage with was particularly thrilling. I do, however, pity the fool that had to edit this gargantuan video. Beautiful truck, btw.

Love the intro.

I had a grand am at 464.678 on it kilometers . great Engine 👍🇨🇦

I love your truck and all of your car and truck

@vehcor

3 жыл бұрын

Thanks!

Nice video, Princess...

On to the next one 😊

love how the dirtnali is only going because you managed to find an even better truck

@vehcor

3 жыл бұрын

I have found lots of them but they are WAAAAY overpriced.

Grand AM are great cars, had two since new, first was an 86, traded in with 315 ,000 kilometers and 2nd was a 96 and ran that one all the way to 465,000 kilometers. It was still running strong when I scrapped her, she had so much cancer and the heater core was done, with some other issues. Did not make sense to invest $$$ in her. Regular oil changes and maintainance works, too bad not everyone does it.

I'd buy anything off this guy, knowing its now better than when it came out of the factory.

I have that same truck, I want whatever center console you have in that thing in mine!!

I would have laughed so much if you popped out of the back and said "so if you don't want to miss any more car repair videos, be sure to ring that bell!" in your best Scotty Kilmer impression. Bonus points for adding some round frame glasses.

Got to love that platodium

@vehcor

3 жыл бұрын

GM seems to! 😂

What a sweet truck.... So nice. Great job on this one. Luckily, it's not done, so you can't sell it... Whew! That was close..... The rain coat looks funny, but does keep you dry... which is nice... The life jacket?!?!? Heh heh heh! Had to stop the video, I was laughing...... Nice! That silly hoist deprived you of the true joys of doing an idler arm, while laying on your garage floor... You missed out..... (not).

Bonus WOD for the afternoon crew!

@vehcor

3 жыл бұрын

Should have made her carry the bumper around the shop for time! lol

👍Ya ! The camo in the recycle bin ! Let's go to the next ' whre no man has gone before '.

@vehcor

3 жыл бұрын

No, camo must go in the garbage! We don’t want it coming back! 😂

@larrybe2900

3 жыл бұрын

@@vehcor Those window vents in "smoke color" are ideal in the summer. Look good and make the interior bearable upon entry with the window open that little bit.

Wait, HOLD ON JUST A SECOND.... Bed LIGHTS?..... Dang it, I'm getting older, I need those now too!! Oh, and yes, torque oil filters to 6000 ft pounds, but transmission plugs do not go to 5000. You tighten them until they strip out, and back them off half a turn. That's the perfect torque right there!

@vehcor

3 жыл бұрын

You don’t know how important bed lights are until they go out! 😂

That trans filter has a large round magnet that is suppose to be moved from the old filter to the new filter. Maybe you did it and it was cut from the video, but, it's pretty important. Thanks for the video.

Seems like those door sill areas would be a good place for GM to put those heavy duty clear coating stickers like those used behind and in front of the rear wheel well and the rocker panels to prevent paint chips. You get a lot of mileage out of your bumper installation tool.

You were probably not aware that Mr. Spoty is a Great Ford fan. So get with the program.

You have a very adorable personality, at least the part we get to see :-)

Scott - Jiffy Lube's torque-spec is known as "FT". It roughly translates to 6 ugga-duggas.

'Playdonium' bumper material, opposite of UnObtanium. Always entertaining!

I’m so trusting of you Scott that I give it the thumbs, wait for it, up before I even watch because I know I’m going to learn something and be entertained also, great job gnomes 😇 ps how’s the mustang coming on

awesome...

Just remember to have fun out there. Yep, that was in the console too. Definitely needs a hole in the roof.

YOU LEFT THE BAFFLE DIRTY

Is the truck really finished, appears to me that something is wrong with drivers window....... 👍 keep the rebuilds coming!

i believe on some year models like that one they changed things to make it easier to service plus alot of times they can void warranties is you remove the trans pan so making it like this with a replaceable external filter no need to drop the pan hell wish my 04 sierra was like this

Great work Scott. I wonder what you plan on doing with that Sun Roof :D

@vehcor

3 жыл бұрын

Thanks, I have some plans for it!

Considering how fast used truck values have risen I wouldn’t be surprised if you get more money for the truck now than you would have 1 year and 20,000 miles ago!

Wish I had the green to buy that truck!

I dented that chrome bezel around the license plate ($400 bucks) so had to tear it all down just to get at the mounting bolts did it on my garage floor, dam, that bumper is heavy!

I really appreciate G.M.s use of 10mm. bolts .

never lift it all that does is lower its resale value plus it looks good nice work man still dying to see the mustang project though been watching that since day one

There should also be a donut magnet on the old trans filter to transfer over to the new filter, if it didn’t have one!! My 2015 lml has one anyway,!! Just thought I’d add my expertise in there😬🇺🇸

Man you are to funny I would buy a car from you before I would a dealer 😎 truck looks nice good job ✅And I’am going to get a couple shirts for the summer. Your new nickname the The Waxer 🤔

Happy Easter Everyone

Beautiful truck. I had a grand am paid $1300 for it, drove it over 100,000 miles and sold it for $1500.