Loved this interview with Justin. He's THE go-to-guy for any Corvette owner. He's very intelligent and loves his job! The owners of those Corvettes he oversees are very lucky to have him as their mechanic.

@ToolBoxTour

7 ай бұрын

He loves his job forsure! It’s always nice to see someone in their field and are so passionate about it!

That dude definitely takes pride in what he does.

@ToolBoxTour

7 ай бұрын

A lot of pride forsure

This technician did a really good job at comparing the strengths of SnapOn vs Milwaukee…he didn’t throw shade at either company 👍

@ToolBoxTour

7 ай бұрын

Yeah I agree

Pretty impressive young man. Very mature for his age.

@ToolBoxTour

7 ай бұрын

I thought the same thing

Love seeing young guys take pride in their work and tools.

I envy the cleanliness, I'm working in a diesel truck fleet and that means nothing is ever clean.

@michaelbolton1090

7 ай бұрын

I do diesel too. I try so hard to keep my stuff clean, but it is a losing battle. I love the look of the white boxes, but that box would get trashed!

@tylerrobinson6158

7 ай бұрын

Same here, so dirty and the amount of crap on everything from grease and oil

@ToolBoxTour

7 ай бұрын

Yeah it seems like it’s tough to keep things clean while working diesel.

Sleek and effective setup, I like the way he clearly uses everything but cleans everything so well. Enjoy the new box Justin.

@ToolBoxTour

7 ай бұрын

Yeah he keeps things super clean that’s forsure

Another great toolbox tour! I look forward to seeing this channel grow. I love that you appear to be excited and shocked about everything. Like him talking about how GM switched to tube style silicone and you're like "oh wow! No way!".

@ToolBoxTour

7 ай бұрын

I loled at this comment 😂 It doesn’t take much to excite me haha

Smart guy seeing the demand with these new mid engine Corvettes. The buyers of these cars are nothing like a buyer for a pickup or daily beater. He’s setting himself up for a serious career working on exotic cars. This guy will be tearing apart a Ferrari in no time at all.

@Ectasied

4 ай бұрын

uh corvettes aren't exotic, and to work at Ferrari its minimum 2 years on higher end Europeans.

@markm0000

4 ай бұрын

@@Ectasied Have you seen a C8 torn apart? It’s nothing like old Corvettes. In some ways it’s more complicated than European cars.

@Ectasied

4 ай бұрын

@@markm0000 i have seen the repairs yes, have to ever worked on a gt3?

@markm0000

4 ай бұрын

@@Ectasied No I haven’t seen a GT3 getting worked on but I’m sure it’s like a spaceship with entire components that get replaced after so many miles knowing Germans… the situation in America is that Chevrolets were always very basic cars and trucks for normal people that any mechanic with basic tools can work on. That was true up until the C8 and this car is so different and complicated nobody that buys one wants a novice mechanic working on it and most mechanics don’t even want to work on it. Most dealerships aren’t even properly setup to work on these cars, they’re still struggling to work on EVs that Chevy sold a decade ago. The overlap between Chevy dealers and competent mechanics that can work on a C8 is very slim. Most guys at this level usually go work at European dealers or racing shops to get paid better. This video wouldn’t have gotten thousands of views if that wasn’t the case. American car brand dealerships are a terrible place for mechanics, they don’t get paid enough $$ for basic jobs on normal cars. Asking them to start working on a super car at the same $$ is not going to happen. This kid is either too smart for his own good or friends with the owner.

@jerryf703

2 ай бұрын

He should be working on them now lol....

Aside from the tools, loved him sharing his knowledge.

this guy is awesome and it looks like he takes a lot of pride in his work.

@ToolBoxTour

7 ай бұрын

Yeah definitely a lot of pride 👍

Not sure if I trust a tech with a clean white toolbox or not 😂 Joking of course. Great setup.

@ToolBoxTour

7 ай бұрын

Haha he keeps his area so clean. I love it!

Man thats a clean and fancy setup but given what he works on I wouldn't expect anything less, really cool tour Justin is super down to Earth while also being really well versed in his craft. Keep up the great work man

this guy is so awesome!!!! he takes so much pride and has a lot of passion!!! love to see it!!! i love hearing techs explaining every tool use case

I really like how he doesn’t discriminate against any tool company. He buys from them all just like I do. I also have an Arca series but it’s the 57”

2:49 Only $216 ???? What a bargain ! Excellent setup and collection. I can really appreciate the cleanliness and organization. I keep all of my tools very clean and organized as well. Thank you for sharing

You really inspired me to make my own diy tool box tour, thanks for giving me a nudge to whip out the phone and just toss up my pride and joy. Cheers

@ToolBoxTour

7 ай бұрын

Hey! I’m glad you are able to share it!

Well organized bay. The tool that comes to mind instead of grinding your own for the convertible release is called a "long reach" by access tools. Built for popping latches on lockouts.

@ToolBoxTour

4 ай бұрын

Good to know!

Im not sure how you find these guys but damn.... straight up FIRE!!!! these guys you find are Sharp!!! Keep up the great videos.....

Enjoyed learning about Justin's unique tweaks to his tools and toolbox (LED cap lights, corvette top clip removal tool, magnets, phone charger, etc.). Also nice to see that he is more concerned with each tool's functionality rather than the brand. Another great tour. Thanks Dustin.

@ToolBoxTour

7 ай бұрын

Thanks for watching!!

so good! I love how clean he keeps his stuff everything will last forever

Justin was so cool and the setup was good and loved all the tools

One of the best videos! Great set up and this guy is a true pro!

@ToolBoxTour

7 ай бұрын

Thanks Gary! I’m glad you liked this one

I give him credit when I was a tech at GM dealing with some of the corvette owners was like working at a daycare with a new mom dropping off her first born for the first day. What’s the most you’ve seen someone owe on a tool truck charge account? I worked with a guy that owed $18k on his truck account just tools not from a box. Meanwhile myself and a few others would pay cash and negotiate group buy prices from the tool dealers

Great tour 💯 this is my fav so far 🍻

@ToolBoxTour

7 ай бұрын

Glad you liked it!

Good job! Keep em coming!!

@ToolBoxTour

7 ай бұрын

Thanks!

Such an impressive set up. And another great video. Keep it up 👍👍👍👍

@ToolBoxTour

7 ай бұрын

Thanks Ryan!

Hats off for being a Corvette tech, much more patience and understanding then I have. Nice box and selection too!

@ToolBoxTour

7 ай бұрын

Thanks Chris!

Your reactions during the interview is so funny. “Omgggg a little flashlight omggggg slap my knee and call me a knee slapped, owwwww sooo cool” 😂

That's an awesome and clean setup. Almost like a surgical area, rather than a maintenance shop.

Love these damn videos!!!

@ToolBoxTour

7 ай бұрын

Thank you so much!!

Great video, I should have seen it sooner. Great tech for sure, and nice setup!

@ToolBoxTour

2 ай бұрын

Yeah he has some great ambition. Looking forward to the visit!

I have always looked at a man's tools and work area this young man not only takes pride in what he does you can tell he has worked hard for his tools I would be willing to bet if he ever has a come back it's a part failure 👍😎👍

@ToolBoxTour

7 ай бұрын

Yeah he takes pride in what he does forsure

I really appreciate how clean and organized his tools and boxes are. Some trucks cost as much as a Corvette these days and all that expensive leather needs to stay clean and not scratched just like the paint. The top hutch of the Craftsman box would make a great charging station for his cordless tools. I would definitely have those battery chargers up there and not tangled up in a drawer.

Because I’m new to your channel, I get to go through your back catalogue, which means there’s always one to watch at the moment. I love that young mans enthusiasm and pride in his tools and toolboxes. Interestingly I’ve heard ‘ladies feet’ referred to in a number of your videos, which we call ‘heel bars’ here in the UK. Having recently retired from a chief engineer position, one of the highlights of employing a new engineer was always looking at his tool kit…………….perhaps I’m not as strange as everyone used to think I was!! I love tools and even at 63 am still buying…………please keep them coming!!

@ToolBoxTour

4 ай бұрын

Thanks for watching Paul!

Another great video

@ToolBoxTour

7 ай бұрын

Thanks David!

This guy is a professional through and through.

@ToolBoxTour

7 ай бұрын

Yeah forsure!

Thanks!

@ToolBoxTour

7 ай бұрын

Holy cow!! Thank you so much!!!

Wow this is a lot. I’m going to have to watch this a few times.

Great dude, very articulate. One question I wish you would ask all the mechanics that you interview is, “how much in debt are you, with all your tools”? I think a lot of us would like to know. Great interview as always, keep them coming!

Please do someone with a series 3 box with top quality tools in it.

i have one of the bluepoint service trays and they are sick, especially good for brakes and light maintenance stuff

@ToolBoxTour

7 ай бұрын

They look super handy!

Guy literally knows where every single tool in the whole shop is lol

Appreciate the pricing notes thanks!

@ToolBoxTour

6 ай бұрын

You bet!

Just a random appreciation post for pouncing KUHnipex correctly!

Another evening with tool box ASMR. Btw for following up on details always set up the speed to 0.9 😅✌🏼

Dude has pride in his tools, job, and appearance. Awesome to see.

Im wondering what did he use for that power tool drawer( power tool rack) on the Arca.

You can get those magnetic panels at Lowe’s now, craftsman brand.

@ToolBoxTour

7 ай бұрын

Good to know!

He off the adddyyyyyys Ik them licks ahah

Where are you located? I would love to show you my set up and would fall right in line or even cooler than your other tours possibly.

@ToolBoxTour

7 ай бұрын

I’d love to see it! You can contact me on instagram @toolboxtours or just send me an email at toolboxtour@gmail.com

i wonder if you can ask them what type of tool stypend some of these techs get or discounts or percentage

What brand was those lights?

Hey I’ve come across engines with low compassion, it ain’t good ! Lol

@ToolBoxTour

7 ай бұрын

😂

I usually don't wear earbuds at work because I feel kinda rude, but like he said it drives me crazy having to stop what I'm doing and take off my gloves to check my phone then it's usually not important

@ToolBoxTour

7 ай бұрын

Yeah I can see how they could be a safety issue on top of it. But with the transparency mode they have on the AirPods, it can actually protect the techs hearing.

@gregblau8082

7 ай бұрын

@@ToolBoxTour I've always thought about the safety aspect too

Long time ago I worked in a tire shop and we lifted a corvette and didn’t know what we were doing and the body flexed and the windows shattered.

@ToolBoxTour

23 күн бұрын

😱

All imma say is if your tools ain’t dirty you ain’t using em

👍👍‼️ how old is Justin? just curious

@ToolBoxTour

7 ай бұрын

Not sure to be honest. I believe early to mid 20s

How far do you travel for tours?

@ToolBoxTour

7 ай бұрын

I’m located in Utah. I don’t travel out of state often but if your setup is nice enough, I do. 👍

$247 for thar baby 1/4 inch rachet? Now that's bs. Granted, my quarter inch zero turn from snapon was $160 but that in the right application, in vetter than any ratchet. $247 for that lil thing though? I got a grinder and a harbor freight. I would recommend those slzero turns though. Those things are life savers when ratchets and wrenches don't work. For real

Dude should showed his personal drawer just started is lotion important lol

@ToolBoxTour

7 ай бұрын

When your washing your hands constantly, they get dried out quick

That Snap-On dial indicator setup is a rip off, you can buy a Mitutoyo setup for half the price

@ToolBoxTour

3 ай бұрын

Good to know!

$216 for that little biddy stubby 1/4 ratchet 😂😂 you gotta be joking

Go to a Nissan dealership!!!!!

@ToolBoxTour

7 ай бұрын

It’s on the list!

Is this what this guy does is goes around to garages to snoop in tool boxes?

@ToolBoxTour

7 ай бұрын

You make it sound like a bad thing 😂

Take a shot for everytime this kid licks his lips...

This one is probably my favorite tour so far. He seems really really proud of his tools, boxes and work. I’ve been looking at getting a locket like him for my chemicals, sprays etc @toolboxtours

@ToolBoxTour

7 ай бұрын

A locker is awesome for stuff like that 👍

Label more of the tool please and thank you. Keep it up man love watching.

@ToolBoxTour

7 ай бұрын

I’m glad you enjoy them!

Need a master torx set. What’s a good one that doesn’t skip much sizes?

@jwctech

7 ай бұрын

GEARWRENCH 49 Piece 1/4", 3/8", 1/2" Drive Torx Bit Socket Master Set - 89087------$66 QUINNMaster Bit Socket Set, 87-Piece-----$99 Capri Tools CP30031 Master Torx Star Socket Set, 60-Pc ----$54 Capri Tools Master Bit Socket Set, Advanced Series, 88-Piece (30500-88MS)--$193 87 pc TORX® and Hex Bit Socket Set (Blue-Point®)-----$540

@ToolBoxTour

7 ай бұрын

On top of those ^ the OTC master set is really nice as well. OTC 5900A-PLUS

@bowser987

7 ай бұрын

Thanks man

@jwctech

7 ай бұрын

@@ToolBoxTour another great choice also 👌

@jwctech

7 ай бұрын

@@bowser987 yessir 💯🇺🇸🇺🇸