Corsair HS70 PRO Battery Upgrade Replacement - How to Replace | Install Remove | Gaming Headset
Ғылым және технология
How to replace and upgrade the battery in Corsair HS70 PRO wireless gaming headsets.
Increase your use time by 50% with our battery here centralsound.co/products/repl...
Premium XL Ear Pad Upgrade for Corsair HS50 HS60 HS70 PRO (Cooling Gel, Hybrid and Protein Leather) Buy Here centralsound.co/products/cent...
Video of demo and how to Install our Premium XL Ear Pads Here • CS Cooling Gel Ear Pad...
How to Install OEM Type Ear Pad Here : • How to Replace Earpads...
Order OEM Typ Ear Pads Here: centralsound.co/products/cent...
How to Change Polarity : • Reverse Battery Polari...
Пікірлер: 186
How to replace and upgrade the battery in Corsair HS70 PRO wireless gaming headsets. Increase your use time by 50% with our battery here centralsound.co/products/replacement-battery-for-corsair-gaming-headsets-mouse-1500mah-3-7v Premium XL Ear Pad Upgrade for Corsair HS50 HS60 HS70 PRO (Cooling Gel, Hybrid and Protein Leather) Buy Here centralsound.co/products/centralsound-premium-xl-replacement-earpads-cushions-ear-pads-for-corsair-hs50-hs60-hs70-pro-gaming-headsets Video of demo and how to Install our Premium XL Ear Pads Here youtu.be/pCKK How to Install OEM Type Ear Pad Cushions Here : kzread.info/dash/bejne/foGrsLugobnPnbg.html Order OEM Type Ear Pad Cushions Here: centralsound.co/products/centralsound-premium-replacement-earpads-cushions-ear-pads-for-corsair-hs50-hs60-hs70-pro-gaming-headsets
just recently replaced the battery on my HS70 Pro and i gotta thank u for making this tutorial as quick and straightforward as it can be. took about 10 minutes and everything went smooth
@CentralSound
11 ай бұрын
Glad it helped!
Great Vid, easy to follow. swapping polarity was a little tricky. At testing, ICUE software remained unable to recognize the battery. The Charging indicator remained Red and panic set in since this is what the old dead battery status was. checked all connections, went inside pc to verify everything. all ok. so to the forums i went. Someone indicated a hold down for 10secs on the power button clears the software. So sure enough, it worked and all is fine. Charging and working Great.
@CentralSound
2 ай бұрын
Great to hear it’s working !
Thanks for the video! FYI: if the light blinks Red and Amber it means the battery is not connected properly. Once properly connected it is solid amber while charging.
@CentralSound
Жыл бұрын
Thanks for weighing in!
@drujo25
Жыл бұрын
My Headset blinks. Will the replacement done in this video fix that? Or is it a different issue?
You're doing gods work man. Saved me the hassle of thinking i should replace the headset entirely haha😅 this is what i get for leaving the headset to charge overnight excessively for multiple nights
@CentralSound
9 ай бұрын
Thanks for watching
thank you for this and for the battery replacement. It worked perfectly. Swapping the wires was a lot easier than I expected.
@CentralSound
10 ай бұрын
Glad it helped
Thank you for this tutorial! Pretty easy to do when you got the right directions
@CentralSound
Жыл бұрын
Glad it was helpful!
I've been looking for a tutorial like this for MONTHS. Thank you kind sir, for demonstrating precisely what needs to be done, this will save me another 80 euros!
@CentralSound
Жыл бұрын
You're very welcome!
@Brukner841
Жыл бұрын
@@CentralSound yeah same here! Much appreciated.
Thanks to take your time to record and edit this. It helped me a lot. 👌😊
@CentralSound
Жыл бұрын
Glad it helped!
Thanks guys for sending the battery and for the video. Easy install , works 100%
This guy knows it all! Check out his products, especially his Bat Pods!
@CentralSound
Жыл бұрын
Thanks for your order and small business support. We're happy you like our BatPods ANC / ENC Wireless Ear Buds
Thank you so much for such a good and clean tutorial, it solved my problem!
@CentralSound
Жыл бұрын
Glad it helped!
just replaced the battery from my hs70, thank you again =)
This is soooo helpful!! thank you very much. If I was not in the Philippines, I would definitely visit your shop and appreciate what you do. Thank you again!!
@CentralSound
Жыл бұрын
Hello Archie, Thanks for dropping a comment and expressing your gratitude for what we do.
Awesome video. Thanks I removed the two screws on the green chip as it mad it easier to re-connect the battery.
@CentralSound
9 ай бұрын
Hello, thanks for the props and tip.
Cheers man! Will do that soon!
Thank you for this video. I also went up to a 1500mAH battery. I didn't have the exact tools you have, but I used my plastic car trim tool which worked just as well. edit: My old battery was so swollen. I disposed of it properly. ;)
@CentralSound
Жыл бұрын
Very innovative using that car trim tool. Great to hear the video helped you. Thanks for taking the time to chime in and leave a comment.
@dangermouse9494
Жыл бұрын
@@CentralSound I am not afraid of modding headsets. I had a set of Sennheiser PC350s that I drilled holes in and stuffed with cotton to improve sound. Modding my headset to make the 1500mAH fit was easy and a no brainer.
@CentralSound
Жыл бұрын
"drilled holes and stuffed with cotton to improve sound" We should make a video on that.
Great video, thanks for the help on replacing the battery!
@CentralSound
10 ай бұрын
Glad it helped
Thank you! New battery works great.
@CentralSound
Жыл бұрын
You're welcome!
Thank you this was perfect. I would totally have missed that the polarity needed to be switched
@CentralSound
Жыл бұрын
You're welcome!
so glad i found this, my headset went from lasting a whole day to only staying charged for 2 hours.
@CentralSound
Жыл бұрын
Glad we can help
@luckgrip252
Жыл бұрын
Mine's even worse. My headset lasts for only 30min on full charge. Loved the times when the battery was holding up for a whole day and some change more.
Ur a legend Thank you man
@CentralSound
2 ай бұрын
You’re welcome 😉
Thank you for this video. I also went up to a 1500mAH battery to replace my old battery an it workt great :)
@CentralSound
Жыл бұрын
Excellent!
Thank you! this helped me a lot! :)
@CentralSound
Жыл бұрын
Glad it helped!
thanks for the tutorial, just finished successful battery replacement
@CentralSound
2 ай бұрын
Glad it helped
Awesome. Upgraded thanks for the video saved me 200$
@CentralSound
7 ай бұрын
Great to hear!
Awesome video , Thank you very much!
@CentralSound
2 ай бұрын
You are welcome!
Took 10 minutes, Thank you!
@CentralSound
Жыл бұрын
You're welcome!
I definitely plan on doing this at some point, although I'd really like a 2100mah battery option to further increase the battery life between charges.
@luckgrip252
Жыл бұрын
Oh yeah, that would be really nice.
Thanks for the video. Bought the battery from your shop too 😉
@CentralSound
Жыл бұрын
Awesome! Thank you!
Thank you so much bro. I changed mine and works very well.
@CentralSound
Жыл бұрын
Glad it helped bro! Game on my friend 💯
This is a very helpful video, at least for me. It looks easier for a professional but its not so difficult. I wish I could have bought the battery at your shop, sadly I am in Europe. 👍👍👍
@CentralSound
11 ай бұрын
Glad it was helpful!
Excellent video, Thank you!
@CentralSound
5 ай бұрын
You are welcome!
It was very helpful for me. I've just changed my HS70 Pro battery. Battery was very sticky to the body, I needed to use plastic trim remover. I inserted the trim remover from side of the battery from right side and twisted the trim remover and battery came up easily. If you use screw driver it can damage battery.
@CentralSound
Жыл бұрын
Hello, yes that battery can be punctured if not careful removing.
great video, well noted on the pin change, I had to do the same
@CentralSound
Жыл бұрын
Glad it helped!
Do you know if the sound of fast popping in one earpiece while charging/wired is also part of the battery dying?
Big thank you, I save some money today
@CentralSound
Жыл бұрын
You’re welcome!
Thank you, worked great
@CentralSound
10 ай бұрын
Glad it helped
thanks for the video great stuff. but I can not find any 3 wired batteries in my country. is there a way to use the battery with only + and - wires and no yellow wire?
Thank you so MUCH for this video!!!! Also, please do a tutorial of how to change the headband of this model! There is absolutely nothing on the internet
@CentralSound
Жыл бұрын
Hello Luis, thanks for the suggestion. We will certainly look in to making that one.
Thanks!
Nice video ^^ Thanks thanks thanks ❤
@CentralSound
8 ай бұрын
No problem 😊
THANK YOU!
@CentralSound
Жыл бұрын
You're welcome!
Just removed my bloated dangerous battery from my HS70 pro awaiting new one., all removed from you brilliant instructions. new battery next and velor ear cups. thx
@CentralSound
8 ай бұрын
Hey there, thanks for your order friend. We’re glad we can help. Bloated batteries are very dangerous, smart move getting that replaced. The velour are very soft and comfortable, we hope you like them. 💯😃✅
i did it, thank u very much
@CentralSound
Жыл бұрын
You’re welcome , feels good doesn’t it ?
What size is that coupling?
love u my bruuthaa
Thanks for the video, replacing it was very easy. I do notice something weird though, while the duration overall is definitely longer, the iCUE and other third party apps always report the battery level at 86% or so every time I unplug them after charging. My guess is that it has something to do with the firmware being programmed for the original battery size, is there anything else to do here other than the physical replacement?
@CentralSound
Жыл бұрын
Hello, thanks for your question. If the battery life is longer and everything is working as it should then let it be. Honestly, we couldn’t tell you 100% why the 86% is showing on 3rd party apps.
What do I do if I can only hear out of the right headphone?
My mute unmute button on the wired ones have stopped working Please help
I have a set of corsair hs70's and wanted to replace the battery because mine was completely finished , bought a new battery followed all your steps only to be met with the fact that the battery in my model is soldered directly to the board :/ this swap-out is gonna be a lot more involved than i expected
Excellent vid, tyvm, i have one question though (excuse me if it seems obvious) my battery ,like yours says 60-34-50, yet your replacement battery says 50-40-50. oes this make any difference? I seem to recall that those numbers have to do with the battery's size if i understood correctly & since your replacement battery fits just fine, then i need pay no mind to those numbers-am i correct?
@CentralSound
Жыл бұрын
Hello , that's a very good question and observation. On some batteries (like ours in this video) you are correct. On the OEM battery on this video it is not relevant because those numbers are not referring to the size on the OEM battery.
I have an 1800 mAh battery and I’m struggling to fit the connector into the battery. Does this battery have a connector that’s too large? I have the hs70 headset. I’m also wondering if you can only use plastic pry tools to separate the wire holders? Thanks.
@CentralSound
Жыл бұрын
Hello, thanks for reaching out. The connector on the battery might not be compatible, they’re not all the same. It’s important to get the right battery with the right connector, if not you can damage your headset.
Good video, but my HS70s did not have the clasp....the wires were soldered directly to the board, and this did not work as demonstrated. Must be a newer (or older) version.
Hello! Thank you very much for your video, it helped me a lot, you already have a new sub, I have a question, I have the corsair hs75xb, will the same battery that you bought work for me? Or do you think it's different? Currently my battery has died and I'm looking for a solution. I'm thinking of buying it on Aliexpress but I don't know what model or specifications the battery should have
@CentralSound
Жыл бұрын
I would suggest opening it up and taking a look.
Is it a bad idea to heat up the adhesive under the battery so that it is easier to removed and possibly keep some adhesive on the case? also is there a possible way to make the charging usb-c without major problems?
@CentralSound
Жыл бұрын
You could most likely apply some heat at a very mild temperature to loosen it, I would not recommend it though.
Why does mine not have a connector to unplug battery. I have to solder it loose and on again. eish.....
any idea where I can get my hands on suitable battery in the uk?
@CentralSound
Жыл бұрын
We ship to the UK 🇬🇧
I want to replace my battery and rewire it to a battery clip so that i can have hot-swappable 18650s but the new setup wont have a thermistor wire to connect. Is there a way to bypass that thermistor wire in the headset? Would it be a bad idea?
@CentralSound
Жыл бұрын
Keep it simple.
im guessing i cant use a tiny flat head to pry open the connector, i dont have anything small enough that is plastic
@luckgrip252
Жыл бұрын
I used small pliers to hold the connector outer shell and pulled the battery connector out by wires
I'm a novice to this kind of stuff so I'm not sure if this is a basic question or not. Doesn't adhesive heat up and loosen if it's used on a battery? Isn't it better to use double sided tape? I know the OEM uses adhesive but I'm not really sure if there are any differences from what they used compared to Central sound
@CentralSound
9 ай бұрын
Hello, you can use either one.
I have a question about the cable from the battery to the chipboard at 1:45. It seems like I have no connector to my battery, but it has been soldered stuck to the chipboard. Would it still be possible to replace the battery?
@screamline458
Жыл бұрын
I just did mine. Clipped the plug off the new bat, carefully soldered them in place. I have a slight feedback hum though. Only notice it when nothing is playing. Feel like I remember it from before but haven't used these in months so I can't fully recall if the HS70 just normally has a power hum or if I crossed something
@CentralSound
Жыл бұрын
Hello, thanks for your question. It's possible perhaps if you solder it, but we would need to take a look. You can send some pics to us at info@centralsound.co so we can further assist you.
I have mine upgraded to misodoko pad(previous owner changed it). Is it fine to reopen the padding or will i have to replace new paddings as well to change the battery?
@CentralSound
11 ай бұрын
You should be ok with using the same ear pad.
I'm changing my sennheiser bluetooth headset and it has 3 wires and the only available li-po battery only have 2 wires is it okay to solder 2 wires i stead of 3?
@CentralSound
Жыл бұрын
Can you send us some pics at info@centralsound.co ?
Hi , Thank you for sharing is it possible to change mini-usb to usb-c ?
@CentralSound
Жыл бұрын
That's a great question. We will look into this and see.
@CGgreen
Жыл бұрын
it is. but just don't use a fast charger for it. i don't think it has protection for that.
very useful would a 1800mah for a "hs70 pro" fit? and would double sided tape be good instead of adhesive?
@luckgrip252
Жыл бұрын
From my measurements, as long as you're in the range of these dimensions: Length - 52mm; Width - 35mm; Height - 10mm Going off my research the 1800mAh batteries are slightly below that dimension range in every aspect. You should be good to go with that one. I myself am looking for a solution to replace my blown battery with... It's impressive that it has gone from stock 5mm thickness to 9mm (even then it fits pretty well and there's no pressure against the speaker + 1mm extra comes from the adhesive strip)
@CentralSound
Жыл бұрын
Hello and thanks for your question. It depends on the size and type of battery. You should be ok with double sided type.
Do I have to keep them off while they fully charge for the first time after replacing the battery or can I use them while charging? Great tutorial!
@CentralSound
Жыл бұрын
You can use them if you want to. It’s best though to let it charge completely.
Took mine apart and the battery was soldered straight to the board along with some teeny tiny wires running to the other side, thanks corsair
@CentralSound
Жыл бұрын
Hello, oh no, what model do you have ? We may have a battery that will work for that.
@marinaborgert
Жыл бұрын
Yeah, the HS70 normal (non-pro) version is like that. I have both at home (pro is mine and "normal" one is my husband's) and opened them to try to exchange the batteries cause my pro battery has been dead for months and my husband has another headset and is not using his "normal" anymore. Nasty surprise. Even the battery capacity and tension are the same, it's ridiculous that the said pro version does not carry any improvement on that... it's barely better just for its ease in swapping batteries. Oh and my pro original battery is swollen like it's about to pop 4 babies out of it (of course it's not going back in my headset). And it came directly from Corsair RMA to replace my HS70 normal. Total bummer.
@CentralSound
Жыл бұрын
Hello Marina, thanks for weighing in by sharing your experience with both the HS70 PRO and HS70 versions. Your feedback and insight is extremely helpful 💯...Watch out for battery babies, those are dangerous 😧
@jodawgsup
Жыл бұрын
@@marinaborgert Is there any way to replace those batteries? Because I have the exact same problem with the HS70s.. The thing basically stopped working and the battery was also 4/5 times its size.
@voodoo5643
Жыл бұрын
@@jodawgsup You have to clip the plug from the new battery, and the wire from the old one and solder the leftover wires and the new battery wires together. I wouldn't touch the solder directly on the board as some of the wires looks just too delicate to mess with them. For me at least, it went easier working with the wires only. I'm through with my 2nd battery change by now, altought I swapped for 1200mAh versions. All working fine.
can a 2 wire battery be used to replace the original 3 wired one?
@CentralSound
Жыл бұрын
We wouldn’t suggest it.
i was way over thinking this lo
Warning (please upvote this comment): YOU CANNOT FOLLOW THIS METHOD FOR HS75 even though the website says you can. The battery housing is much more complex. Also the battery in the hs75 is soldered
Battery life on my HS70 pro is currently about 4-5 minutes (do I win anything for lowest battery life? :P ) and as its well over 2 years old now Corsair support just advised me to buy a new headset so I'm really glad I found this easy to follow guide. Just ordered a 1000mah battery and am looking forward to being to relax with it unplugged again.
@CentralSound
Жыл бұрын
Glad we can help you relax while playing. Our battery is a 1500mAh upgrade, even more time between charges. 💯👍
@luckgrip252
Жыл бұрын
Battery life on my HS70 is non-existent. A little over a week ago it was 30min, but each day the charge dropped by 10min, currently the blown battery serves as a buffer because without it the headset only plays for 5seconds and abruptly shuts down and doesn't turn back on until you disconnect and reconnect the USB
@CentralSound
Жыл бұрын
Buy one from us 😉😆
Anybody here have experience fixing corsair HS50 and HS70 pro wireless? Do they have the same pcb? Broke my hs70 pro volume wheel and I have an old hs50 laying around. I dismantled it and having trouble finding a layout of the hs70 pro wireless online. Do they look the same for those who have fixed and hs70 pro wireless before? Thanks so much!
I just replaced the battery in my headset, and the led light is going from dark red, to light red to orange. Does that mean that i put the battery in incorrectly? Or is it charging like it should?
@CentralSound
Жыл бұрын
Thanks, just charging up.
Can i use 2000mah instead of 1500? And what can i do when my battery for replacement have only 2 cables out
@CentralSound
Жыл бұрын
Which model do you have ?
@dr.kashie1513
Жыл бұрын
@@CentralSound I have the same question. I have Corsair HS70.
Hi. Its possible to replace it with a 3500 mah battery? its the only that i find. regards
@kyleeaster1214
Жыл бұрын
I think the 2000mah one is the biggest one that fits, or two 1500mah the size numbers for my 2000mah are 103450
@CentralSound
Жыл бұрын
We have these same batteries in the vide for sale we sell here centralsound.co/products/replacement-battery-for-corsair-gaming-headsets-mouse-1500mah-3-7v 3500mAh sounds like the battery may be too large to fit
Will the same battery work on HS70 WIRELESS ..i dont have the pro model.
@CentralSound
Жыл бұрын
Hello, you would have to open it up and see what battery is in there.
@suvamk
Жыл бұрын
@@CentralSound oh..ok
Did anyone else find that the battery was soldered onto the little PCB?
i do the same as the video, but my battery have only two cabes, its functioning but dont light up de recharge light, can i do something? the phone dont talk if are recharging or not in audio too. i belive the battery came at full charge.
@CentralSound
Жыл бұрын
The original battery or replacement has only two wires ?
@1nquisi7or
Жыл бұрын
@@CentralSound Yes only two wires, its not original.
@dr.kashie1513
Жыл бұрын
Im going to order a replacement battery with two wires. Does it work perfect? You battery working perfect?
Any easy way to put it back? When I try to insert the last tab, it just bounces it back, and it won't fit on it
@CentralSound
Жыл бұрын
Hello, not sure how to answer your question. Are you referring to inserting the wire in the connector ?
@5fercho5
Жыл бұрын
@@CentralSound Sorry my bad I can't put back the ear cup again 😅
@CentralSound
Жыл бұрын
Hello, it is a little tricky. I has to be lined up just right. Keep on trying, you will get it. 💯
My hs75 xb headset just died and won't turn on with no charge light I bet this is why.
just would like to make sure, the battery is located at the right side of the headset correct?
@CentralSound
Жыл бұрын
Yes that is correct 👍
@zipzap_1822
Жыл бұрын
@@CentralSound hey man just would like to give you an update. I just replaced the battery and it was pretty simple and easy to do just by following your video. I greatly appreciate you making the tutorial. Also I ordered the cooling gel ear pad from your website. Can't wait to try them on :)))
@CentralSound
Жыл бұрын
That's great to hear! Thanks for your orders. The cooling gel ear pads are a great upgrade, I think you will really like them.
Sold out. Will it be back on stock soon?
@CentralSound
Жыл бұрын
We should have them in about a week or so.
I got a replacement battery with 2 WIRES only black and red. It's a 3.7V 1500mAh. From AliExpress. What should i do?
@CentralSound
Жыл бұрын
Good question! You bought the wrong battery.
@dr.kashie1513
Жыл бұрын
@@CentralSound Oh. But I can't find any rechargeable battery with 3 wires out on Ali Express. So thought 2 wired might work too.
@CentralSound
Жыл бұрын
You should have bought our battery. The link is here. Don’t trust batteries from Ali , some are not safe. centralsound.co/products/replacement-battery-for-corsair-gaming-headsets-mouse-1500mah-3-7v
@luckgrip252
Жыл бұрын
@@dr.kashie1513 2 wire battery works, but it'd be recommended to have the 3rd wire as a security measure so the battery wouldn't explode because of overcharging. In reddit regarding this topic some have mentioned that everything works alright, but it can cause the microphone button to not work for some odd reason.
I love you
@CentralSound
10 ай бұрын
🥰
Merci mon casque ne tient même plus 30 minutes… Je vais remplacer la batterie grâce à ton tutoriel
@CentralSound
2 ай бұрын
Thanks
I can't find a battery available for EU help
@CentralSound
Жыл бұрын
We ship to many European countries.
you think this is the same battery with HS80?
@CentralSound
Жыл бұрын
Hello, that's a great question. We will need to get that model in our shop and investigate to find out.
My battery is soldered to the little pcb 😢
@CentralSound
Жыл бұрын
What model do you have?
@juancampuzano4841
Жыл бұрын
@@CentralSound I didn't notice that my headset is the non pro hs70 wireless 😅 I just cut the wires of the inflated battery and with electrical tape connected the new one haha