Those must be the cleanest cat studs ever - must of had a new cat recently

More useful stuff fella, thank you and merry Christmas.

I have a 1.4 euroflo exhaust sitting in my living room ready to go on my other half's vauxhall corsa. Your video has given me abit of a heads up of the perils that i have ahead of me. I just hope the cat to mid pipe bolts arent seized

@TomsDriveway

5 жыл бұрын

That's great, I'm glad it has helped. Yeah I do try and be honest in my videos.

@Marks-Garage

5 жыл бұрын

@@TomsDriveway I was quite lucky in that the 3 nuts came off easily enough in the end. The only issue I ran into is that the new flexi pipe would tap the subframe brace under heavy acceleration. Spaced it out about 5mm lower and alls good!

I do have to say its good to see a "young guy" actually having a go at doing some car repairs because so many have no skills and seem reluctant to attempt even the basics. Well done pal !

Where did you get the exhaust from?

Thanks for the video. Hoping to fit to a 1.0 Ecoflex at the weekend. A bit different I think but a good guide. Also happened to buy it from Zombie Cars too!

@TomsDriveway

5 жыл бұрын

Ayy Great! They are good after market replacements but mine wasnt perfect. Just be careful as a head up!

Nice video. I aim to be replacing mine in the coming days. Is the only section that needs the assembly paste the pipe connecting to the back box off the middle silencer? Also I haven't got a torque wrench, so how will I know I've tightened the cross member and the other section you say, tight enough?

What sealant did you use before putting the centre clamp on?

Hello Tom,thank you for tutorial video.I have a Opel corsa B.How many sensor are there? Where is the second sensor ,Bank 2 located?

I did everything right but my ingine light come on after fitting a new ..Please help ..The o2 sensor was a problem taking it out of the old one was carefully not to mess with it but used abit of WKD. PLEASE ADVISE FURTHER THANK YOU.

How much did you spend in total? Can you name the tools used please. (And on the previous video) Thanks. Luv the video.

Hey Tom, great vids always. 👍🏼. Can I ask at 2:11 size nuts are you using? I need to replace mine but they are completely corroded and I'm not sure what size I need? Thanks again, look forward to next vid.

@andyfitz1992

3 жыл бұрын

m8 flanged nuts: www.amazon.co.uk/8mm-Serrated-Flange-Hex-Nut/dp/B07KKKX219/

What size is the exhaust bracket for joining together 👍

What went wrong is. When ever you disassemble a exhaust. You should start it once to hear the raw sound. Even from 4 cilinders

Did the exhaust system come pre-welded or did you have to that yourself? where did you buy your exhaust from also?

@TomsDriveway

6 жыл бұрын

hey will, i got it from Ebay. Althought personally it wasnt the best quality, but £80 for the whole thing tho... The exhaust was all pre welded i just had to connect the backbox to mid section with an exhaust clamp.

@TomsDriveway

6 жыл бұрын

Im not too sure really, i suppose maybe an hours labour plus the cost of the exhaust. So maybe £130 or something maybe more.

@WillCattell1

6 жыл бұрын

any chance you can send me a link to which one you bought? struggling to find what i need. Did gasket and clamps come with?

@TomsDriveway

6 жыл бұрын

Hey, my exhaust did come with gasket and clamp. I got it from zombie-cars on ebay. If you google corsa d 1.2 centre pipe it comes up.

Corsa d 1.2 exhaust are a bit on the quiet side, so I drilled a 3 inch hole in the back box. Now it sounds more sporty. It also feels a bit more quicker.

💪🏻💪🏻👍

Thank you for the video will be changing mine this weekend...please just need to know the sizes of the nuts that you had to cut off..👍☝️☝️☝️cheers

@TomsDriveway

4 жыл бұрын

13mm nuts I replaced them with

What size sockets for the sensor, cross brace and exhaust

@TomsDriveway

6 жыл бұрын

Hey the cross brace is 17mm, 13mm for exhaust and sensor you just need an O2 sensor socket.

@ryanneill3339

6 жыл бұрын

Tom's Driveway thanks 🙏 I don’t have sensor socket 👎🏻 it’s gunna have to be an adjustable or spanner that fits for that bit lol

@TomsDriveway

6 жыл бұрын

Haha, im not sure id risk it. They can become rust welded into the exhaust sometimes. They are £7.00 for eurocar parts. A little expensive but makes sure you dont round the sensor off. And have to buy a new sensor. Be careful and good luck! Let me know how it goes

@ryanneill3339

6 жыл бұрын

Got back box off easy, went round to front section and realised the nuts are welded on lol fml I better start sawing lol

@TomsDriveway

6 жыл бұрын

Hahaha yeah mine were the same, an absolute pig ahha!

1:15 what is the size of those nuts?

@tsonyumateev8573

3 жыл бұрын

I think M8 pitch 1.25mm spanner 13mm used in many cars

I am changing my in few days its deteriorate very badly.

@TomsDriveway

5 жыл бұрын

Brilliant, yeah thry get real corroded.

I can't seem to get my exhaust manifold off at all. It's being held in by the steel cable you see at 1:08. I can't get a torx bit to fit in to the cable mount bolt since the exhaust manifold is in the way. Any ideas?

@TomsDriveway

4 жыл бұрын

Can you potentially heat it up and smack a bigger torx bolt in

@fiazshah3838

4 жыл бұрын

@@TomsDriveway Could do. I'm really in the process of getting the head off, so if I can prise away the manifold from the head, just enough to lift off the head, hopefully I won't need to undo the steel cable mount.

Looking at this www.cybox.co.uk/product/corsa-d-cat-back-system/ need to check the 3 bolts first, if rusted sod that!

@TomsDriveway

6 жыл бұрын

Looks good tbh, yeah tbh id do that. Although you could just cut them off and re drill some on.

Will you start monetising your videos!!! You’ll be able to buy more stuff for the Corsa 😀

@TomsDriveway

6 жыл бұрын

So basically id need 1000 subscribers to start being able to monetise. I would like to because it would help alot with buying stuff as you say.

@HogwartsBasement

6 жыл бұрын

Tom's Driveway damnnn !!! Try posting your videos on forums such as Corsa-E and corsa-D forums if they apply

@TomsDriveway

6 жыл бұрын

Thanks Lee, i occasionaly do. Although i try to avoid being too pushy i guess.

@HogwartsBasement

6 жыл бұрын

Tom's Driveway be more pushy! I wouldn’t limit your videos to only corsa, despite it being a popular car but I see that you done a review on the chrome polish. Keenup the good work tho !!

@TomsDriveway

6 жыл бұрын

You are probably 100% right really, I did yeah. Tbh i think i should have reviewed the actual polish more, but i once i started on the car i found it hard to stop and record haha