Using a different technique to machine multiple ball knobs in the manual lathe . Other profile turning video link , • Copy Turning Ball Knob...
Жүктеу.....
Пікірлер: 203
@johnbewick63576 ай бұрын
Just lighting up my wood burning stove here in the UK while watching this, so forgive me for being a little envious of seeing you in shorts, and suffering a heatwave.
@swanvalleymachineshop
6 ай бұрын
Lol , Cheers 👍
@jonsworkshop6 ай бұрын
Every day is a school day Max, never seen that trick before. Worked hydraulic copy attachments but the simplicity of this for 2's and 3's off is excellent. It's been 1 Deg C here today, and minus 8C last night, as much as that is rubbish, I don't think I could work in 40C, in fact I know I couldn't 😂😂
@swanvalleymachineshop
6 ай бұрын
Thanks Jon . Hey , i have never seen the pins on the mag chuck set up before either ! I watch the videos on TV , then have to remember to drop a comment as my computer is in the workshop ! Lol , i could handle the 1 deg but not the minus 8 . The high 30's & 40 get a bit unbearable at times though ! Might have to move back to New Zealand ! 👍
@howardosborne8647
6 ай бұрын
You would need a gallon of Guinness to keep you hydrated😅
@MikezVW5 ай бұрын
Clever stylist attachment! Keep the hot chips out of your boots.
@swanvalleymachineshop
5 ай бұрын
Thanks 👍
@paulhammond74896 ай бұрын
Enjoying these 'tractor' parts, and another glimpse at your day job, some cool CAT's there. Be good to see your shaper in action for the tractor seat slide ;)
@swanvalleymachineshop
6 ай бұрын
No worries , Cheers . 👍
@AWDJRforYouTube6 ай бұрын
I'm an old lathe dog that just learned a new trick today...Thanks Max, gona try making and using that set up!✅
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@williamfissell16946 ай бұрын
That is as slick as greased owl poop. Love it.
@swanvalleymachineshop
6 ай бұрын
Lol , Cheers 👍👍👍
@warrenwise81275 ай бұрын
What a ball tearer of an idea!!!! putting this one in my memorey bank incase I need it!! Thanks for sharing your knowledge !
@swanvalleymachineshop
5 ай бұрын
No worries . 👍
@stevewilliams24986 ай бұрын
Fascinating that yesterday I was watching a KZreadr in Canada struggling with the snow whilst today you are scaring us with your legs in a heat wave. 😊
@swanvalleymachineshop
6 ай бұрын
Lol . 👍👍👍
@barrycaudle99266 ай бұрын
Nice technique Max, always good to see another method.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@GraemeStephens6 ай бұрын
nice one Max, I like the variation of Jobs from the Tractor customer.
@swanvalleymachineshop
6 ай бұрын
Lol , he drops in a good mixture ! 👍👍👍
@howardosborne86476 ай бұрын
The trick with a trailing stylus copier such as seen here is to keep your main focus on the stylus rather than looking at the cutting tool. That is a mighty shaper you have there👌
@swanvalleymachineshop
6 ай бұрын
Cheers . You have to keep focus on the stylus to prevent a crash . If i am doing them manually with no template , i look at the shape of the work opposite the tool rather than watch the tool . 👍
@richardmills54502 ай бұрын
I like that eyed deer.. Cheers
@swanvalleymachineshop
2 ай бұрын
No worries 👍
@StefanGotteswinter6 ай бұрын
Very cool solution!
@swanvalleymachineshop
6 ай бұрын
Thanks . Simple is best sometimes ! If you ever see a manual (in English ) for a Jung HF 50 surface grinder around , i am looking for one ! Cheers 👍
@JourneymanRandy6 ай бұрын
That is a cool way to do that Max. Nice legs. -14 here in the morning. Snow tonight.
@swanvalleymachineshop
6 ай бұрын
People need to wear sun glasses when i break out the shorts ! 👍
@alandawson28136 ай бұрын
Another awesome video Max, wow thank you, I learn so much from your videos. From kiwi land.
@swanvalleymachineshop
6 ай бұрын
Thanks . Been a long time since i was there last , i am from Wellington . 👍
@williambowen70074 ай бұрын
Thank you Max, I really enjoyed the learning experience, now I have to engineer a copier. PS, be careful what you complain about, it was 2.5 F here (Ohio, US)this morning, that -16.3 C.
@swanvalleymachineshop
4 ай бұрын
Thanks . -- 16 would be a bit much ! 👍
@stevecanny15836 ай бұрын
Real nice job Max! That follower is a great idea! :)
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@ccbproductsmulti-bendaustr32006 ай бұрын
Machinist school with Max 👍👌learn so much from you
@swanvalleymachineshop
6 ай бұрын
No worries , Cheers 👍
@m0xya6 ай бұрын
love the manual copy tracer.. works like a charm..
@swanvalleymachineshop
6 ай бұрын
Thanks . Simple & effective . 👍
@TedRoza6 ай бұрын
G'day Max, Excellent video of not only duplicating the original ball etc, but your duplicating jig was right up there 🎉😊. Liked your workshop tour, as well as a diff. Lock when things go wrong. Reminded me of an oversize Key Cutting Jig. 😅😂😂
@swanvalleymachineshop
6 ай бұрын
Cheers Ted . 👍
@MattysWorkshop6 ай бұрын
Gday Max, that’s a great idea, I’ll have a look at the LaBlonde page, that’s sound like a very interesting setup, it’ll be good to see the shaper going to mate, top job, cheers
@swanvalleymachineshop
6 ай бұрын
Cheers Matty . Le Blonde made some great attachments . I still have to check out your vice video , i would not mind the 3 inch version . 👍
@CraigLYoung6 ай бұрын
Neat technique 👌 Thanks for sharing 👍
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@stovepipe6666 ай бұрын
nice job max looking forward to seeing the shaper working
@swanvalleymachineshop
6 ай бұрын
Thanks . 👍
@chiefauditor16832 ай бұрын
This is exactly what i'm looking for. I need to make a petticoat for a steam locomotive
@swanvalleymachineshop
2 ай бұрын
No worries 👍
@bostedtap83996 ай бұрын
Brilliant, never seen that on a standard lathe, used a bridgeport mill with a probe on the quiil at 150mm centres. Great job Max.
@swanvalleymachineshop
6 ай бұрын
Thanks . 👍
@DavidR86 ай бұрын
Very clever. Definitely tucking that idea away for future use.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@RalfyCustoms6 ай бұрын
G'day Max, 3⁰C in my shop this morning ya bastard lol, knobs are looking great mate, wizard idea with the tracer, I'm under a blanket on the settee after spending the weekend chopping me bloddy Dyna 😊 Have a great one mate and best wishes to you and yours
@swanvalleymachineshop
6 ай бұрын
Cheers Ralfy . Stay warm ! 👍
@pauldehaan35746 ай бұрын
Another trick i have not seen before.......Ill have to try that.......Thanks for sharing
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@mjm71876 ай бұрын
Max, always keeping it simple and clear. Definitely a keeper for my toolbox memory. Thanks for this!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@hersch_tool6 ай бұрын
Simple, effective, brilliant. I love it.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@jdmccorful6 ай бұрын
You are a "Wizard" Max! Enjoyed watching, careful of the heat my friend.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@theoutbackshed6 ай бұрын
Nice attachment Max. I haven't seen this done this way before. I shall store this method up for future use.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@clydedecker7656 ай бұрын
I can't see well but it looks like that seat slide is curved and made of multiple thicknesses of sheet metal. Doing it on a shaper will involve a lot of different setups - maybe some welding of different sheets ... fun but lengthy. Good luck, Max.
@swanvalleymachineshop
6 ай бұрын
Thanks . It is one piece & straight . 👍
@opieshomeshop6 ай бұрын
*_I used to rebuild rear ends. Most of them for muscle cars and race cars. Not on heavy eqpt. Good idea on the lathe. I've been working on one for my lathe but it's a tiny bit different. You're more than welcome to send some of that summer my way. We're in freezing temps here right now in Wa state._*
@swanvalleymachineshop
6 ай бұрын
Swap weather no worries , unless there is ice & snow involved ! Check out the early Le Blonde copy version with a counter weight . 👍
@imysteryman6 ай бұрын
Simply put, You Max know some shit. Cheers
@swanvalleymachineshop
6 ай бұрын
Lol , forgotten a lot as well !!! 👍
@MyLilMule6 ай бұрын
That's a pretty cool attachment for the lathe. Looking forward to seeing the shaper in action. You're getting heat waves while us up here in Ohio are expecting 5 inches of snow!
@swanvalleymachineshop
6 ай бұрын
Thanks . We do not get snow here in Perth . 👍
@StyxHackshop6 ай бұрын
Ripper video Max and a great follower attachment. Was wondering about the compound usage until the power feed came into play! Glad that you weren't affected at the shop there by the fires out your way too. Nasty season coming, stay safe
@swanvalleymachineshop
6 ай бұрын
Thanks . Yes , the heat & fires have come early this year . 👍
@lonniebrock32826 ай бұрын
Another great one Max
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@willemvantsant51056 ай бұрын
Hi Max, never seen this done before, thanks for sharing, should be cooling down this week. Nice and cool up here, north east monsoon with Siberian winds.
@swanvalleymachineshop
6 ай бұрын
Thanks . The bloody Easterlies are howling here non stop mornings & night ! 👍
@willemvantsant5105
6 ай бұрын
Yep, used to visit friends in Forrestfield, absolutely howling easterlies coming over the Darling scarp. Pilots hate it.
@be0076 ай бұрын
nice to see about your day job max! that copy system is nice and easy and fast. cheers ben.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@johnwilleford77156 ай бұрын
That is slick Max ! 👍
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@kentuckytrapper7806 ай бұрын
Excellent job max, gotta build me one of those,great video, keep'um coming..
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@Darkrif19576 ай бұрын
I love that idea Max i might try it on my Lathe. Thanks for sharing , Cheers Karl
@swanvalleymachineshop
6 ай бұрын
No worries . Works great , once you get the hang of it . 👍
@DudleyToolwright6 ай бұрын
That was really cool, Max. You made that look easy. I suspect that following a set of curves like that takes a bit of practice.
@swanvalleymachineshop
6 ай бұрын
Thanks Rob . A little bit of practice ! 👍
@pingwax.5 ай бұрын
Very slick, great video!
@swanvalleymachineshop
5 ай бұрын
Thanks . 👍
@USA_276 ай бұрын
Nice Work on Lathe Machine
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@Randysshop495486 ай бұрын
Brilliant work Max. It was 20 degrees F here this morning 🥶 Thanks
@swanvalleymachineshop
6 ай бұрын
That's cold alright ! Cheers 👍
@mcgama886 ай бұрын
Hi Max. Enjoying the lathe work but while in my study as "light snow today with nite temp as -2C" not working to shop as much. Your close in camera and view to process excellent. Here, "All views to terrain above as snow covered. Freezing rain as new week forecast". Regards, M.
@swanvalleymachineshop
6 ай бұрын
Thanks , too cold there ! 👍
@kimber19586 ай бұрын
Thank you Max. I’ll be taking a close look at that tracer. Good days to you.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@THEIRONWORKER6 ай бұрын
Your going into summer and I'm going into winter . I will like to see the old shaper running . I have one 24" Rockford I need to do a clean up on and do some shop projects with it
@swanvalleymachineshop
6 ай бұрын
Thanks . Your hydraulic one is just a bit bigger than my 500mm one ! But yes , it will be good to see running . 👍
@frankerceg43496 ай бұрын
Thanks again Max! Love it!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@kens.88346 ай бұрын
I been around along time and I never seen a follower quite like that before -- simple and effective ! I can always count on you, Max, to come up with a new method and problem solver ! I predict we'll be seeing several thousand similar followers showing up in shops in the near future thanks to you . Double thumbs-up, Max ! 👍👍
@swanvalleymachineshop
6 ай бұрын
No worries , Thanks . 👍
@jayminor97576 ай бұрын
Great idea for the copier attachment Max. Having T slots on my cross slide, mounting will be a breeze. Added to the list of projects!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@eyuptony6 ай бұрын
Brilliant method, Max. I'd love to make one, but I've nowt that needs copying, lol. It's on the books though. It'll be great to see your shaper in action. Nice one....Tony
@swanvalleymachineshop
6 ай бұрын
Thanks Tony . 👍
@grahamsengineering.25326 ай бұрын
Very nice Max.
@swanvalleymachineshop
6 ай бұрын
Cheers Graham 👍
@alungiggs6 ай бұрын
Thank you Max. Good video as always 👍🇳🇱
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@Rustinox6 ай бұрын
Genius! Simple and effective. And indeed, the shaper will be a good choise of machine to make the slide.
@swanvalleymachineshop
6 ай бұрын
Cheers Rusty . Perfect job for a shaper ....although it will take 10 times as longer than the mill , Lol !!! 👍
@Rustinox
6 ай бұрын
@@swanvalleymachineshop Get your timer ready, so you can compare.
@jakebronger35686 ай бұрын
G'day Max. I will use your set up next time needed, Good and simple and fast. Thanks
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@alasdairhamilton15746 ай бұрын
Love the tracing attachment. All you need to do is to stamp them WD (War Department)& the part No 👍🏴
@swanvalleymachineshop
6 ай бұрын
Lol , a few arrows ! The owner does the stamping . 👍
@TrPrecisionMachining6 ай бұрын
very good job friend max..thanks for your time
@swanvalleymachineshop
6 ай бұрын
Cheers 👍👍👍
@RustyInventions-wz6ir5 ай бұрын
You make it look easy
@swanvalleymachineshop
5 ай бұрын
Lol , thanks 👍
@simpleman2836 ай бұрын
That is just slicker than Owl Shit. I've never seen anything like it. 👍👍👍.
@swanvalleymachineshop
6 ай бұрын
Slicker than snot off a chickens lip ! 👍👍👍
@markrand6526 ай бұрын
Just like them all, thank your for sharing!
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@howder19516 ай бұрын
Nice work, great accessory . I'll gladly trade some of that heat for our approaching winter coldness. Enjoyed the video, cheers Max!
@swanvalleymachineshop
6 ай бұрын
Thanks . I will take the cooler weather any day ! 👍
@user-fc5bd8iy4mАй бұрын
That sir is cool as hell, you have taught me so much and it is grealy appreciated 😊 ps i still haven't said anything where your wifes dishes have been😂😂 have a good one
@swanvalleymachineshop
Ай бұрын
Cheers . Lol , she gives me the ones she does not want . Otherwise i get yelled at ! 👍
@robertlewis46666 ай бұрын
Nice one Max, I have a similar setup on my mini lathe for copying. BTW we are having the same heat wave and tempratures as you, here on the Witwatersrand Highveld in South Africa! Just waiting for the rains and cooler weather.
@swanvalleymachineshop
6 ай бұрын
Thanks . We had a small thunder storm & some big rain drops for a few seconds last night . Only takes a few drops & the noxious weeds in the paddocks take off again ! 👍
@hilltopmachineworks21316 ай бұрын
I though it looked a little warm in the shop. It is a -5C here right now. Old man winter has arrived. Interesting copy attachment you made. I tried to copy a part once using the same method but I set up a indicator to follow the part. I zeroed the indicator and tried to stay at zero as I copied it. Pretty tricky.
@swanvalleymachineshop
6 ай бұрын
Cheers Tom . I have done a spherical bore using the indicator method in an early video . Our weather is all over the place at the moment . 👍
@ottostasi1976 ай бұрын
Great idea , they look perfect . I learn something about every time I watch one of your videos , thanks mate
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@ianmoone23596 ай бұрын
Very ingenious. Have done some copy turning on a wood lathe in a previous life wood butchering, so this was very relatable. 👍 The recent heat would have been awful both at your work and in your own workshop. I’ve been hunkering down inside in the air con, not game to go outside. A bit unseasonable for Spring, not even summer yet. Makes you wonder what it’s going to be like when summer actually gets here. Luckily the big fire over Wanneroo way wasn’t out your way, they lost 18 houses and some sheds in that one. Noticed your small lathe “clacking away” during the copy turning brass. You only did the head stock bearings etc up a year or so back before moving out to the block / new shed. Any idea what’s going on there? You were having some issues with movement between the head stock and bed before the move & I think you were planning to put the bed & head stock up onto your big mill table and test for any movement in the connection between headstock & bed? 🤷♂️ Just curious I guess what the issue might be and what your planning to fix it & if the clacking noise might be related to whatever the previous issue was? Should try & catch up for a coldie before Xmas this year if possible.👍
@swanvalleymachineshop
6 ай бұрын
Spindle bearings are good . Normally i just turn up the radio ! 👍
@bruceanderson94616 ай бұрын
Nice to see what you do on your day job! I bought a hydraulic tracer some years back for $30 and put another $150 into it in new oil, electrical cord and hoses. It is fun to play with even if old technology.
@swanvalleymachineshop
6 ай бұрын
Thanks . The hydraulic tracer i have , is off a DSG . One day i hope to power it up . 👍
@junkmannoparts96966 ай бұрын
Max that's a great idea . I never thought about making such a simple tracer tool for a import machine . Keep up the good work . JM
@swanvalleymachineshop
6 ай бұрын
Thanks 👍👍👍
@junkmannoparts9696
6 ай бұрын
@@swanvalleymachineshopwell with the Dro scale in the way I will have to figure something else out. I have not mounted the magnetic scale yet.
@Preso586 ай бұрын
That worked great. I'm guessing you could make a flat pattern from some 6mm steel plate and weld it to some bar stock if you didn't have an original to copy from. Cheers, Preso
@swanvalleymachineshop
6 ай бұрын
You could do . I have been thinking about a different design for flat plate templates . 👍
@braddobson20606 ай бұрын
-15 c were I am in Canada I think I prefer that over the heat. Good vidio Thanks
@swanvalleymachineshop
6 ай бұрын
Lol . That's cold enough to freeze the balls off a brass monkey . Cheers 👍
@graedonmunro17936 ай бұрын
very handy toy that one!!!
@swanvalleymachineshop
6 ай бұрын
Yes 👍
@1ginner16 ай бұрын
Hi Max, Nice work with the follower. I did something similar with a mag base and a tapered pin, it certainly beats grinding form tools you'll probably never use again. Best wishes, Mal.
@swanvalleymachineshop
6 ай бұрын
Thanks . The mag base works great when you need to be within about one thou . I bored a spherical bearing bore that way in an early video . Cheers 👍
@petermcneill806 ай бұрын
Liked that , that worked out great 👍🏻
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@TheAyrCaveShop6 ай бұрын
Absolutely Brilliant idea Max 👍👍I'm guessing a few practice runs are recommended..Lol and running from high to low points to reduce the Bozo crash factor... Turned out great ! looking forward to some shaper action! Cold weather is kicking here on this side of the planet... Cheers...ATB....
@swanvalleymachineshop
6 ай бұрын
Thanks Dean . Yes , run from high to low . 👍
@PhotogNT6 ай бұрын
Love that copy attachment I think I will have to make one of those for my lathe, great idea thanks for the video.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@MatthewTinker-au-pont-blanc6 ай бұрын
Thank mate, brilliant idea!
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
@user-zp2cz5sh6q6 ай бұрын
I checked my E-male this mornning and found one of my club member spotted yor post. OK I checked it out, dam I'm jellish, Y could I have not came up with this, Steve Gambone, Jefferson, Oregon
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@RustyInventions-wz6ir5 ай бұрын
Nice work
@swanvalleymachineshop
5 ай бұрын
Thanks 👍
@ralphpavero77606 ай бұрын
Great idea ill have to remember that
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@darynradcliffe29096 ай бұрын
'Tractor' knobs?
@swanvalleymachineshop
6 ай бұрын
Yes , tractor knobs . The 1940 , 2 pounder anti tank variety ! 👍
@stevenhavener73276 ай бұрын
Bloody Brilliant !!, feel a new chess set on the way ! best regards Steve
@swanvalleymachineshop
6 ай бұрын
Lol , Draughts . Just part off the discs !!! 👍
@tiredoldmechanic17916 ай бұрын
Very nice copy attachment. I hope you don't get cooked by the heat. Got a dusting of snow here overnight with the temperature just below freezing which is a little warmer than average for this time of year too.
@swanvalleymachineshop
6 ай бұрын
We cook every year with the heat ! Even Autumn seemed very short this year , that's the best time of the year . Cheers 👍
@johnyoung31036 ай бұрын
BRILLIANT!
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@mikepayne87563 ай бұрын
Asked question too soon, I see how it was attached.
@swanvalleymachineshop
3 ай бұрын
No worries 👍
@samuelfielder6 ай бұрын
Neat idea. Thanks.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@iancoulston64526 ай бұрын
21:00 you know we’re imagining you naked 😂.
@swanvalleymachineshop
6 ай бұрын
Lol . If the weather was any warmer , there would not be much left to imagine !!! 👍
@Warped65er6 ай бұрын
Thx for the vid.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
@outsidescrewball6 ай бұрын
Awesome….”quick/simple”😂😂only if you have superior talent/experience running a lathe….ENJOYED
@swanvalleymachineshop
6 ай бұрын
Thanks Chuck . 👍
@RoostersWay6 ай бұрын
Brilliant
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
@mark1119436 ай бұрын
You make that look so easy Max. Us (well this) mere mortals would be so anxious about crashing…. Thanks Is there any way you could modify a taper attachment to become a copy attachment? Cheers mate, Mark
@swanvalleymachineshop
6 ай бұрын
Yes , but it would be a ton of work & set up time . 👍
@stevewilliams24986 ай бұрын
For anyone contemplating making a copy attachment a point worth making is the Stylus should have a similar profile to the cutting tool shouldn't it ?
@swanvalleymachineshop
6 ай бұрын
That it does , but not always . Depends on the profile of the part . 👍
@mikepayne87563 ай бұрын
How is the guide attached? Do I see a weld?
@swanvalleymachineshop
3 ай бұрын
Just tacked on , in case it has to be changed . 👍
@KitCullen-zn4id6 ай бұрын
Will you be taking on a apprentice in the future to create a 4th generation? Kit from Queensland
@swanvalleymachineshop
6 ай бұрын
Will have to wait & see on that one ! 👍
@ginaanastas38513 ай бұрын
what chuck is that on your AL960 Max?
@swanvalleymachineshop
3 ай бұрын
Gator 160mm , they are good chucks . 👍
@melgross6 ай бұрын
A two pounder? That couldn’t have been very effective. Maybe in WW I.
@swanvalleymachineshop
6 ай бұрын
In the first couple of years , i think it was all that was commonly available . Used in France & the Pacific , also fitted to tanks . The latter part , the British fitted a 17 lb gun to Sherman tanks . 👍
Пікірлер: 203
Just lighting up my wood burning stove here in the UK while watching this, so forgive me for being a little envious of seeing you in shorts, and suffering a heatwave.
@swanvalleymachineshop
6 ай бұрын
Lol , Cheers 👍
Every day is a school day Max, never seen that trick before. Worked hydraulic copy attachments but the simplicity of this for 2's and 3's off is excellent. It's been 1 Deg C here today, and minus 8C last night, as much as that is rubbish, I don't think I could work in 40C, in fact I know I couldn't 😂😂
@swanvalleymachineshop
6 ай бұрын
Thanks Jon . Hey , i have never seen the pins on the mag chuck set up before either ! I watch the videos on TV , then have to remember to drop a comment as my computer is in the workshop ! Lol , i could handle the 1 deg but not the minus 8 . The high 30's & 40 get a bit unbearable at times though ! Might have to move back to New Zealand ! 👍
@howardosborne8647
6 ай бұрын
You would need a gallon of Guinness to keep you hydrated😅
Clever stylist attachment! Keep the hot chips out of your boots.
@swanvalleymachineshop
5 ай бұрын
Thanks 👍
Enjoying these 'tractor' parts, and another glimpse at your day job, some cool CAT's there. Be good to see your shaper in action for the tractor seat slide ;)
@swanvalleymachineshop
6 ай бұрын
No worries , Cheers . 👍
I'm an old lathe dog that just learned a new trick today...Thanks Max, gona try making and using that set up!✅
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
That is as slick as greased owl poop. Love it.
@swanvalleymachineshop
6 ай бұрын
Lol , Cheers 👍👍👍
What a ball tearer of an idea!!!! putting this one in my memorey bank incase I need it!! Thanks for sharing your knowledge !
@swanvalleymachineshop
5 ай бұрын
No worries . 👍
Fascinating that yesterday I was watching a KZreadr in Canada struggling with the snow whilst today you are scaring us with your legs in a heat wave. 😊
@swanvalleymachineshop
6 ай бұрын
Lol . 👍👍👍
Nice technique Max, always good to see another method.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
nice one Max, I like the variation of Jobs from the Tractor customer.
@swanvalleymachineshop
6 ай бұрын
Lol , he drops in a good mixture ! 👍👍👍
The trick with a trailing stylus copier such as seen here is to keep your main focus on the stylus rather than looking at the cutting tool. That is a mighty shaper you have there👌
@swanvalleymachineshop
6 ай бұрын
Cheers . You have to keep focus on the stylus to prevent a crash . If i am doing them manually with no template , i look at the shape of the work opposite the tool rather than watch the tool . 👍
I like that eyed deer.. Cheers
@swanvalleymachineshop
2 ай бұрын
No worries 👍
Very cool solution!
@swanvalleymachineshop
6 ай бұрын
Thanks . Simple is best sometimes ! If you ever see a manual (in English ) for a Jung HF 50 surface grinder around , i am looking for one ! Cheers 👍
That is a cool way to do that Max. Nice legs. -14 here in the morning. Snow tonight.
@swanvalleymachineshop
6 ай бұрын
People need to wear sun glasses when i break out the shorts ! 👍
Another awesome video Max, wow thank you, I learn so much from your videos. From kiwi land.
@swanvalleymachineshop
6 ай бұрын
Thanks . Been a long time since i was there last , i am from Wellington . 👍
Thank you Max, I really enjoyed the learning experience, now I have to engineer a copier. PS, be careful what you complain about, it was 2.5 F here (Ohio, US)this morning, that -16.3 C.
@swanvalleymachineshop
4 ай бұрын
Thanks . -- 16 would be a bit much ! 👍
Real nice job Max! That follower is a great idea! :)
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Machinist school with Max 👍👌learn so much from you
@swanvalleymachineshop
6 ай бұрын
No worries , Cheers 👍
love the manual copy tracer.. works like a charm..
@swanvalleymachineshop
6 ай бұрын
Thanks . Simple & effective . 👍
G'day Max, Excellent video of not only duplicating the original ball etc, but your duplicating jig was right up there 🎉😊. Liked your workshop tour, as well as a diff. Lock when things go wrong. Reminded me of an oversize Key Cutting Jig. 😅😂😂
@swanvalleymachineshop
6 ай бұрын
Cheers Ted . 👍
Gday Max, that’s a great idea, I’ll have a look at the LaBlonde page, that’s sound like a very interesting setup, it’ll be good to see the shaper going to mate, top job, cheers
@swanvalleymachineshop
6 ай бұрын
Cheers Matty . Le Blonde made some great attachments . I still have to check out your vice video , i would not mind the 3 inch version . 👍
Neat technique 👌 Thanks for sharing 👍
@swanvalleymachineshop
6 ай бұрын
No worries 👍
nice job max looking forward to seeing the shaper working
@swanvalleymachineshop
6 ай бұрын
Thanks . 👍
This is exactly what i'm looking for. I need to make a petticoat for a steam locomotive
@swanvalleymachineshop
2 ай бұрын
No worries 👍
Brilliant, never seen that on a standard lathe, used a bridgeport mill with a probe on the quiil at 150mm centres. Great job Max.
@swanvalleymachineshop
6 ай бұрын
Thanks . 👍
Very clever. Definitely tucking that idea away for future use.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
G'day Max, 3⁰C in my shop this morning ya bastard lol, knobs are looking great mate, wizard idea with the tracer, I'm under a blanket on the settee after spending the weekend chopping me bloddy Dyna 😊 Have a great one mate and best wishes to you and yours
@swanvalleymachineshop
6 ай бұрын
Cheers Ralfy . Stay warm ! 👍
Another trick i have not seen before.......Ill have to try that.......Thanks for sharing
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Max, always keeping it simple and clear. Definitely a keeper for my toolbox memory. Thanks for this!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Simple, effective, brilliant. I love it.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
You are a "Wizard" Max! Enjoyed watching, careful of the heat my friend.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Nice attachment Max. I haven't seen this done this way before. I shall store this method up for future use.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
I can't see well but it looks like that seat slide is curved and made of multiple thicknesses of sheet metal. Doing it on a shaper will involve a lot of different setups - maybe some welding of different sheets ... fun but lengthy. Good luck, Max.
@swanvalleymachineshop
6 ай бұрын
Thanks . It is one piece & straight . 👍
*_I used to rebuild rear ends. Most of them for muscle cars and race cars. Not on heavy eqpt. Good idea on the lathe. I've been working on one for my lathe but it's a tiny bit different. You're more than welcome to send some of that summer my way. We're in freezing temps here right now in Wa state._*
@swanvalleymachineshop
6 ай бұрын
Swap weather no worries , unless there is ice & snow involved ! Check out the early Le Blonde copy version with a counter weight . 👍
Simply put, You Max know some shit. Cheers
@swanvalleymachineshop
6 ай бұрын
Lol , forgotten a lot as well !!! 👍
That's a pretty cool attachment for the lathe. Looking forward to seeing the shaper in action. You're getting heat waves while us up here in Ohio are expecting 5 inches of snow!
@swanvalleymachineshop
6 ай бұрын
Thanks . We do not get snow here in Perth . 👍
Ripper video Max and a great follower attachment. Was wondering about the compound usage until the power feed came into play! Glad that you weren't affected at the shop there by the fires out your way too. Nasty season coming, stay safe
@swanvalleymachineshop
6 ай бұрын
Thanks . Yes , the heat & fires have come early this year . 👍
Another great one Max
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
Hi Max, never seen this done before, thanks for sharing, should be cooling down this week. Nice and cool up here, north east monsoon with Siberian winds.
@swanvalleymachineshop
6 ай бұрын
Thanks . The bloody Easterlies are howling here non stop mornings & night ! 👍
@willemvantsant5105
6 ай бұрын
Yep, used to visit friends in Forrestfield, absolutely howling easterlies coming over the Darling scarp. Pilots hate it.
nice to see about your day job max! that copy system is nice and easy and fast. cheers ben.
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
That is slick Max ! 👍
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
Excellent job max, gotta build me one of those,great video, keep'um coming..
@swanvalleymachineshop
6 ай бұрын
No worries 👍
I love that idea Max i might try it on my Lathe. Thanks for sharing , Cheers Karl
@swanvalleymachineshop
6 ай бұрын
No worries . Works great , once you get the hang of it . 👍
That was really cool, Max. You made that look easy. I suspect that following a set of curves like that takes a bit of practice.
@swanvalleymachineshop
6 ай бұрын
Thanks Rob . A little bit of practice ! 👍
Very slick, great video!
@swanvalleymachineshop
5 ай бұрын
Thanks . 👍
Nice Work on Lathe Machine
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Brilliant work Max. It was 20 degrees F here this morning 🥶 Thanks
@swanvalleymachineshop
6 ай бұрын
That's cold alright ! Cheers 👍
Hi Max. Enjoying the lathe work but while in my study as "light snow today with nite temp as -2C" not working to shop as much. Your close in camera and view to process excellent. Here, "All views to terrain above as snow covered. Freezing rain as new week forecast". Regards, M.
@swanvalleymachineshop
6 ай бұрын
Thanks , too cold there ! 👍
Thank you Max. I’ll be taking a close look at that tracer. Good days to you.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Your going into summer and I'm going into winter . I will like to see the old shaper running . I have one 24" Rockford I need to do a clean up on and do some shop projects with it
@swanvalleymachineshop
6 ай бұрын
Thanks . Your hydraulic one is just a bit bigger than my 500mm one ! But yes , it will be good to see running . 👍
Thanks again Max! Love it!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
I been around along time and I never seen a follower quite like that before -- simple and effective ! I can always count on you, Max, to come up with a new method and problem solver ! I predict we'll be seeing several thousand similar followers showing up in shops in the near future thanks to you . Double thumbs-up, Max ! 👍👍
@swanvalleymachineshop
6 ай бұрын
No worries , Thanks . 👍
Great idea for the copier attachment Max. Having T slots on my cross slide, mounting will be a breeze. Added to the list of projects!
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Brilliant method, Max. I'd love to make one, but I've nowt that needs copying, lol. It's on the books though. It'll be great to see your shaper in action. Nice one....Tony
@swanvalleymachineshop
6 ай бұрын
Thanks Tony . 👍
Very nice Max.
@swanvalleymachineshop
6 ай бұрын
Cheers Graham 👍
Thank you Max. Good video as always 👍🇳🇱
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Genius! Simple and effective. And indeed, the shaper will be a good choise of machine to make the slide.
@swanvalleymachineshop
6 ай бұрын
Cheers Rusty . Perfect job for a shaper ....although it will take 10 times as longer than the mill , Lol !!! 👍
@Rustinox
6 ай бұрын
@@swanvalleymachineshop Get your timer ready, so you can compare.
G'day Max. I will use your set up next time needed, Good and simple and fast. Thanks
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
Love the tracing attachment. All you need to do is to stamp them WD (War Department)& the part No 👍🏴
@swanvalleymachineshop
6 ай бұрын
Lol , a few arrows ! The owner does the stamping . 👍
very good job friend max..thanks for your time
@swanvalleymachineshop
6 ай бұрын
Cheers 👍👍👍
You make it look easy
@swanvalleymachineshop
5 ай бұрын
Lol , thanks 👍
That is just slicker than Owl Shit. I've never seen anything like it. 👍👍👍.
@swanvalleymachineshop
6 ай бұрын
Slicker than snot off a chickens lip ! 👍👍👍
Just like them all, thank your for sharing!
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
Nice work, great accessory . I'll gladly trade some of that heat for our approaching winter coldness. Enjoyed the video, cheers Max!
@swanvalleymachineshop
6 ай бұрын
Thanks . I will take the cooler weather any day ! 👍
That sir is cool as hell, you have taught me so much and it is grealy appreciated 😊 ps i still haven't said anything where your wifes dishes have been😂😂 have a good one
@swanvalleymachineshop
Ай бұрын
Cheers . Lol , she gives me the ones she does not want . Otherwise i get yelled at ! 👍
Nice one Max, I have a similar setup on my mini lathe for copying. BTW we are having the same heat wave and tempratures as you, here on the Witwatersrand Highveld in South Africa! Just waiting for the rains and cooler weather.
@swanvalleymachineshop
6 ай бұрын
Thanks . We had a small thunder storm & some big rain drops for a few seconds last night . Only takes a few drops & the noxious weeds in the paddocks take off again ! 👍
I though it looked a little warm in the shop. It is a -5C here right now. Old man winter has arrived. Interesting copy attachment you made. I tried to copy a part once using the same method but I set up a indicator to follow the part. I zeroed the indicator and tried to stay at zero as I copied it. Pretty tricky.
@swanvalleymachineshop
6 ай бұрын
Cheers Tom . I have done a spherical bore using the indicator method in an early video . Our weather is all over the place at the moment . 👍
Great idea , they look perfect . I learn something about every time I watch one of your videos , thanks mate
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Very ingenious. Have done some copy turning on a wood lathe in a previous life wood butchering, so this was very relatable. 👍 The recent heat would have been awful both at your work and in your own workshop. I’ve been hunkering down inside in the air con, not game to go outside. A bit unseasonable for Spring, not even summer yet. Makes you wonder what it’s going to be like when summer actually gets here. Luckily the big fire over Wanneroo way wasn’t out your way, they lost 18 houses and some sheds in that one. Noticed your small lathe “clacking away” during the copy turning brass. You only did the head stock bearings etc up a year or so back before moving out to the block / new shed. Any idea what’s going on there? You were having some issues with movement between the head stock and bed before the move & I think you were planning to put the bed & head stock up onto your big mill table and test for any movement in the connection between headstock & bed? 🤷♂️ Just curious I guess what the issue might be and what your planning to fix it & if the clacking noise might be related to whatever the previous issue was? Should try & catch up for a coldie before Xmas this year if possible.👍
@swanvalleymachineshop
6 ай бұрын
Spindle bearings are good . Normally i just turn up the radio ! 👍
Nice to see what you do on your day job! I bought a hydraulic tracer some years back for $30 and put another $150 into it in new oil, electrical cord and hoses. It is fun to play with even if old technology.
@swanvalleymachineshop
6 ай бұрын
Thanks . The hydraulic tracer i have , is off a DSG . One day i hope to power it up . 👍
Max that's a great idea . I never thought about making such a simple tracer tool for a import machine . Keep up the good work . JM
@swanvalleymachineshop
6 ай бұрын
Thanks 👍👍👍
@junkmannoparts9696
6 ай бұрын
@@swanvalleymachineshopwell with the Dro scale in the way I will have to figure something else out. I have not mounted the magnetic scale yet.
That worked great. I'm guessing you could make a flat pattern from some 6mm steel plate and weld it to some bar stock if you didn't have an original to copy from. Cheers, Preso
@swanvalleymachineshop
6 ай бұрын
You could do . I have been thinking about a different design for flat plate templates . 👍
-15 c were I am in Canada I think I prefer that over the heat. Good vidio Thanks
@swanvalleymachineshop
6 ай бұрын
Lol . That's cold enough to freeze the balls off a brass monkey . Cheers 👍
very handy toy that one!!!
@swanvalleymachineshop
6 ай бұрын
Yes 👍
Hi Max, Nice work with the follower. I did something similar with a mag base and a tapered pin, it certainly beats grinding form tools you'll probably never use again. Best wishes, Mal.
@swanvalleymachineshop
6 ай бұрын
Thanks . The mag base works great when you need to be within about one thou . I bored a spherical bearing bore that way in an early video . Cheers 👍
Liked that , that worked out great 👍🏻
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Absolutely Brilliant idea Max 👍👍I'm guessing a few practice runs are recommended..Lol and running from high to low points to reduce the Bozo crash factor... Turned out great ! looking forward to some shaper action! Cold weather is kicking here on this side of the planet... Cheers...ATB....
@swanvalleymachineshop
6 ай бұрын
Thanks Dean . Yes , run from high to low . 👍
Love that copy attachment I think I will have to make one of those for my lathe, great idea thanks for the video.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Thank mate, brilliant idea!
@swanvalleymachineshop
6 ай бұрын
Cheers 👍
I checked my E-male this mornning and found one of my club member spotted yor post. OK I checked it out, dam I'm jellish, Y could I have not came up with this, Steve Gambone, Jefferson, Oregon
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Nice work
@swanvalleymachineshop
5 ай бұрын
Thanks 👍
Great idea ill have to remember that
@swanvalleymachineshop
6 ай бұрын
No worries 👍
'Tractor' knobs?
@swanvalleymachineshop
6 ай бұрын
Yes , tractor knobs . The 1940 , 2 pounder anti tank variety ! 👍
Bloody Brilliant !!, feel a new chess set on the way ! best regards Steve
@swanvalleymachineshop
6 ай бұрын
Lol , Draughts . Just part off the discs !!! 👍
Very nice copy attachment. I hope you don't get cooked by the heat. Got a dusting of snow here overnight with the temperature just below freezing which is a little warmer than average for this time of year too.
@swanvalleymachineshop
6 ай бұрын
We cook every year with the heat ! Even Autumn seemed very short this year , that's the best time of the year . Cheers 👍
BRILLIANT!
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
Asked question too soon, I see how it was attached.
@swanvalleymachineshop
3 ай бұрын
No worries 👍
Neat idea. Thanks.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
21:00 you know we’re imagining you naked 😂.
@swanvalleymachineshop
6 ай бұрын
Lol . If the weather was any warmer , there would not be much left to imagine !!! 👍
Thx for the vid.
@swanvalleymachineshop
6 ай бұрын
No worries 👍
Awesome….”quick/simple”😂😂only if you have superior talent/experience running a lathe….ENJOYED
@swanvalleymachineshop
6 ай бұрын
Thanks Chuck . 👍
Brilliant
@swanvalleymachineshop
6 ай бұрын
Thanks 👍
You make that look so easy Max. Us (well this) mere mortals would be so anxious about crashing…. Thanks Is there any way you could modify a taper attachment to become a copy attachment? Cheers mate, Mark
@swanvalleymachineshop
6 ай бұрын
Yes , but it would be a ton of work & set up time . 👍
For anyone contemplating making a copy attachment a point worth making is the Stylus should have a similar profile to the cutting tool shouldn't it ?
@swanvalleymachineshop
6 ай бұрын
That it does , but not always . Depends on the profile of the part . 👍
How is the guide attached? Do I see a weld?
@swanvalleymachineshop
3 ай бұрын
Just tacked on , in case it has to be changed . 👍
Will you be taking on a apprentice in the future to create a 4th generation? Kit from Queensland
@swanvalleymachineshop
6 ай бұрын
Will have to wait & see on that one ! 👍
what chuck is that on your AL960 Max?
@swanvalleymachineshop
3 ай бұрын
Gator 160mm , they are good chucks . 👍
A two pounder? That couldn’t have been very effective. Maybe in WW I.
@swanvalleymachineshop
6 ай бұрын
In the first couple of years , i think it was all that was commonly available . Used in France & the Pacific , also fitted to tanks . The latter part , the British fitted a 17 lb gun to Sherman tanks . 👍
@WinkysWorkshop
@swanvalleymachineshop
6 ай бұрын
Thanks 👍