Copy / Clone remote duplicator 433Mhz, Copy code, Clear code and Recovery code method instructions
Ғылым және технология
Sonoff devices duplicator remote make using copy/clone remote, how to learn/copy code from original remote using 433mhz copy remote
Пікірлер: 65
An excellent video! I have successfully copied my garage remote.
Thanks, exactly explained how to do it. Worked like charm
BEST of BEST clearly instructions, thanks 😊
Thank you for posting. These instructions are easy to follow.
Thank you very much my friend, you saved me a.major headache
Great video. It worked well . Thanks.
The best, thanks youuuu! ❤️🙏🏻
Thanks for this video gets to the point and worked first time
Thank you. It works!
Thank you for your video 😊
Best video explains how to reset and recode this RC
Thank you! Very helpful.
@Techlogics
5 күн бұрын
You're welcome!
Awesome work!
perfectly explained,thank you......
@Techlogics
8 ай бұрын
You are welcome!
My stupid remote that has to copy the codes is not flashing at all at start when clicking A+B. It starts to flash after 5 seconds then long flashing. What the hell am I doing wrong?
thank you so much
thaks, woked for me
I have a Vauxhall Vectra C. Will this work to copy my key for opening my doors and trunk? Thank you
Can i do it without the remote copier device? Just 2 remote can be cloned?
Is it possible to concert it into a mobile application ?
Can I use this for my car?
Tried cloning my garage remote, and everything went as should, light on the cloned remote is solid blue, which tells me it has copied code but does not operate garage? any ideas ?
The IR LED is located in front of the remote, why not put both remote front to front to facilitate the copy process ?
Thank you finally someone with a brain lol
Easy instructions. Thank you.
@Techlogics
2 жыл бұрын
Thank you
Hi, I tried to reset a Sonoff universal remote (433 Mhz) by pressing A+B button, but the led remains steady RED. How can fix it? Another question, how can I replace the battery ? thank you
I cannot reset the remote can you. Please help me with this it jus keeps flashing when I press any button from ABCD
@MarioFoxChannel
2 жыл бұрын
Did you solve this? It’s happening to me too
@gamingdude9033
Жыл бұрын
Did any solution . Same with me
@shirasphysio
Жыл бұрын
Press A and B simultaneously until LED flashes thrice then release B while keep pressing A, then press B 3 times and you will see led flashing continously then remove hand from A now the remote will be erased from codes then press and hold A on the copy remote and then on the original remote. same for B
How do I connect a new original device. It seems I have two original remotes. One works. And the other doesn’t just replaced the batteries to start testing it
@Techlogics
6 ай бұрын
One original remote only (pairing) support automation devices, If you want to pair another one use a clone/copy remote that remote should copy the wireless frequency code from original remote.
With me, my garage door opens but does not close. And I can only open my garage door once, and when I close it again with my original remote and then want to open it again with the cloned remote it won't go I don't understand :(
Reset and copy looks successful and it works fine for the very first time when I first press the button, but then it "forgets" the code and never works again unless I repeat the whole procedure. Any idea?
@MoAli72
Жыл бұрын
Sounds like you need a rolling code fob.
@HitenderThejaswi
Жыл бұрын
Same problem here … anyone got a solution for this ?
@shirasphysio
Жыл бұрын
same here... what could be the reason.... should I buy rolling code remote and do it again? is it available in Amazon? Is it pricey?
I press A and B at the same time and it will not blink. The LED stays solid.
@Techlogics
2 жыл бұрын
Make sure your remote model should be copy/clone type remote. Or try C & D Button
No clue how this works. What is the copy button ? Got 4 units. Mom is working.
When i try to clear the codes off the new remotes they won't clear by pressing the 2 top buttons no matter how lo g i hold them! Plz help
@christianreiss7203
Жыл бұрын
Hold them together for few seconds than realise one button and keep presing other one, then realised button press 3 time while holding pressed button
How can I make master remote to work all remote
When i clicl A+B, it keep gives me continous blue light without flashing no matter yime of clicking 😮
Is there a way to add a new code without having to delete all the codes previously installed?
@MoAli72
Жыл бұрын
I want to know too, did you find out?
Hi. My remote is continuously flashing and no combination of keys can stop this. Do you know what i can do?
@FrancescoBaldacchini
Жыл бұрын
same here
@dianazamfirescu359
Жыл бұрын
@@FrancescoBaldacchini i figured. Turns out there was an issue with the C button. Something made it stay pressed and i had to remove it. Might be an imperfect contact somewhere.
@markiemannetje
Жыл бұрын
@@dianazamfirescu359what brand/model is that remote control they’re cloning onto?
An 433 mhz key could be cloned into a 355 mhz key?? Thanks
@Techlogics
5 ай бұрын
No, 355Mhz support 355Mhz clone/copy remote only
@user-uc5lc4wi5r
5 ай бұрын
Thanks!@@Techlogics
I can go trough the first steps easily, but when I try to copy it the light flashes few times then stays on. Can’t seem to get it to flash rapidly. What am I doing wrong?
J'ai besoin une démonstration d'une amc
i can not reset the remote
@Rosalinda-sg5bj
4 жыл бұрын
I have the same problem
@Techlogics
3 жыл бұрын
Make sure the remote is clone/copy compatible remote
Mer
El mando falla no funciona