Level up your chiller career! HVACTIME Chiller Academy offers interactive courses, that can go in the field with you to learn, designed by chiller veteran to guide you through complex chiller systems. Learn at your own pace and gain the expertise to thrive. Limited-time Early Bird Discount available! chilleracademy.com

Wow never seen inside a cooling tower amazing 😊

Great video. If I could just correct him on one thing, The louvers above the fill are not inlet air louvers. They are drift eliminators. Their purpose is to collect water vapor so it can drip back down instead of going out the top through the fan.

Wow. That was very good. Maintenance is key to equipment longevity and preventing unplanned down time. Unfortunately companies under bid and don’t provide techs sufficient time to do the right thing. Over greasing is my biggest pet piv. Thank you for this presentation.

@j.b9346

2 жыл бұрын

I wasn’t aware of over greasing being an issue. What could possibly happen to bearings if there over greased? What’s a good rule of thumb for how much grease to use? Thanks

@soufianenurse9088

4 ай бұрын

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@soufianenurse9088

4 ай бұрын

😊

@soufianenurse9088

4 ай бұрын

😊

@TheChillerGuys

3 ай бұрын

I have seen some nasty towers over the years. I had one customer that had tower no sales and strainers so plugged, that the machine was doing a 28 degree temp rise on the condenser with the machine only loaded to 30 percent lmao

great content, appreciate the effort you and your team put in

Thank you I've learned more in this 35 minute video than in my 20 year in the field lol

@HVACTIME

Жыл бұрын

Glad it helped

@pacibaco

Жыл бұрын

I agree ! Being in maintenance limits your training and knowledge base . I get information only if I shadow others that are “ ok “ with me shadowing them , otherwise my training was only in finishing, painting and drywall.

@doroteoalvarez5142

4 ай бұрын

Damn 20 years? I did industrial and some commercial work for 3 years while I do appreciate that cooling towers fed me and bought me some toys I couldn’t stand it😂

@TheChillerGuys

3 ай бұрын

This guys really good, at explaining things, been following his content for awhile

You guys touched on pretty much all service points. Just an FYI, a closed loop tower is commonly called a fluid cooler too. Which has many advantages over an open loop. The use of the fan without the water in the basin, use of the spray pump separately with no fan, or a combination of spray pump and fan for higher load days.

Love this channel thank you for takeing the time to teach! Lots of help for us new to the trade. God bless thank you!!

@HVACTIME

2 жыл бұрын

Thank you for your support!

Really good explaination

Great explanation Manny knows his stuff.shout out from New York.

Really helpful and knowledgeable. I do not do chillers but am interested into getting into the field of it and this was really helpful. Keep up the good work 👍

Manny did a great and through explanation. He knows what he is talking about. This channel's presenter is a novice. Manny is a pro and can explain everything.

@MR-backup

7 ай бұрын

4:09 Doesn't he mean supply from the Chiller?

a full 8 day from top to toe. love this video

You guys are awesome with all the helpful info you provide. Thank you.

Thank you for a good explanation on the intricacies of preventive maintenance! Love this video!!

I'm moving in to larger system HVAC work and this is a great video for learning. Thank you and keep up the good work.

Thanks for the video just transferred from residential to commercial and thought this was great!!

Thanks Manny for the tour. We had one of these at my school always wanted to know how it worked.

Guys well explained. This is one of the best videos have watched on KZread.

Nice video, great knowledge and experience. Thanks for sharing

Nobody can teach like you very good sir

Very thorough rundown, thank you 🙏🏼

@HVACTIME

2 жыл бұрын

Thank you

Top of the line. explaining, much appreciated

Nicely explained working of cooling tower at site, thanks

Good break down, thx for sharing.

Very informative, thank you!

Very much appreciated.... great explanation🎉🎉🎉

Underrated Chanel

Excellent video

great and wonderful video and information thank you very much for the effort

Wow thanks for the knowledge 🙏🏽

Great information 👍🏿👍🏿👍🏿

Great stuff and thanks from London England

That's literally so COOL!

Intresting👨‍🔧

Plumber here just poking my head in, man that was all very interesting, great video

Thanks for the video!

Great video

Great explanation

Finally a better understanding of identifying a closed loop system 🤙🏼

Thank u for very good video 💪👍

good stuff as always man

Can Manny or yourself do a video on Well-Water systems? I am seeing these more often lately on accounts in the Caribbean. I’m sure it’s becoming more common due to advances in technology. 👍🏽👍🏽👍🏽 great work everyone!!!

Great video 👍🏿

This shows how to do a complete inspection on a large item of HVAC equipment. Is it typical to have a written checklist for this type of procedure?

Thank You...

Do like to share this very informative cooling tower maintenance, please.

Great Vid

Good to know, thanks

Let’s go all my HVAC brothers

Yes!

Solid

Great vid. I see you standing inside the tower with a ladder next to you. Isn't that considered confined space are? I know it would be for us unless it was declassified, I would recommend replacement with all the structural cracks. Upsell!!!👍👍👍👍👍👍👍👍👍👍

Up by the motor and fan we call those mist eliminators. We also have lots of fluid coolers for towers. Most companies here have companies that specialize in towers perform the PM. We occasionally change the belts and fill and air inlet fill.

@HVACTIME

2 жыл бұрын

Ya thats definitely not the norm here

I'll be rewatching this one allot 😂

So when is the best season to “pm” a cooling tower? Thanks for sharing your videos

I gave your channel link to a buch of apprentices and I’m surprised how fast they catch on between that and working with it daily

I like this channel

@HVACTIME

Жыл бұрын

Thank you!

Good luck

So what do you do about the cracks, also do the safety switches get stuck with so much rust and humidity?

After doing 2 years of light commercial. I applied for an entry level hvac position at a hospital. They have 2 cooling towers but unfortunately we do not service or mess with the chiller, Only the air handlers. I wish I can get my hands on the equipment

Great post. Unless I missed it, our PVC? inlet air louvers are directional. Many different vendors have worked on both of our cooling towers due to emergency availability. When I started doing my own PMs I found them all installed so the water would be diverted to the outside of the tower. Not being able to find any firm answers from our local vendors, I turned them around. It would make sense to me that you’d want any splash or residual water going back into the tank not out. Did I do the right thing? Excellent info here.

@HVACTIME

2 жыл бұрын

It has to do with air flow direction. Its intended to direct the incoming air evenly across the fill.

@monkfry

2 жыл бұрын

@@HVACTIME so is what I did correct then, facing inwards? Thanks for the reply btw.

I work for a company we pressure wash that whole unit and we treat the tower with are in house chemicals blends.we clean them out every 6 months to 1year we clean out alot dirt and algae off ....Apollo technology .. in California

Ok is it a counterflow tower or crossflow tower? Counterflow towers have spray nozzles. Crossflow towers Ave a pan at the top and the water comes down via gravity and condenser pump discharge force

How would i as a 10 year commercial refrigeration tech get in this field? I have a lot of mechanical background as well

What type of Fill does this tower have? and how many cells does the tower have? There are two types of fill. Splash fill, and film fill.

im in texas so yeh our towers take a beating more than 6 months out the year... we do our pm bi annual before summer and before winter

Hello I am a supermarket refrigeration service technician and looking to go for chiller service technician. What do I need to have to become chiller service technician and what is life compared to supermarket technician?

This is off topic, but I have a similar system and looking for ways to conserve power while tenants are not in the building (Fri-Sun). Can I turn the 4 AHU's off, there are 2 on each floor, 2 floors. If I turn the AHU off, what actually keeps the water circulating in the closed loop water chilled system? Thanks

@utubedestroysmytime

2 жыл бұрын

If you turn the AHU off water will not flow through your coil cause your actuator will close but your circ pumps should stay on moving the water. Find out where your circ pumps are

What are your thoughts on this industry as far as a later introduction to the trade ? I’ve been in the trades for decades and now maintenance for about 6 years. I learn readily but training g is limited unless I’m with a great tech . Would apprenticeship be the way to go ? I still have a lot of interest. Thanks

@HVACTIME

Жыл бұрын

It is a very tough situation the trade is in as a whole. If you can find a really good company that has good techs to be an apprentice at that is very beneficial but that's not a whole lot different than just working with a company that has good techs. It really is one of our biggest issues right now, we've lost so much of our senior experience. Those of us that are left are having to train a large volume of people at a time and it is very difficult at every company. One great thing is there is a ton of opportunity in the trades right now to do just about anything you want, but it's because of the lack of experience as to why those opportunities are there. What this means is that those who are willing and capable will have to strike their own way more than they'll be able to be trained. I hope that makes sense. And is somewhat encouraging or gives some form of direction?

Safety first people! before all these steps and going inside the tower make sure to lock out tag out all disconnects!

I work for a company that clean all the inside eliminaters of that and teat water also ricks,Evap co..

❤🎉🎉🎉

What are the temperatures entering an exiting this condenser unit?

@davepeera1247

7 ай бұрын

it's 30 entering and 25 centigrade leaving. Generally it's about 5°c difference

Do you guys shock the tower before u guys do pm’s on them?

@HVACTIME

2 жыл бұрын

No, only when customer requests and they have their chemical company do it.

How much would a maintenance like this cost?

Can someone explain heat sinks in a cooling tower ?

Does vibration switch in cooling tower a "must need?'" Or it is just optional for the more safety of equipment?

@HVACTIME

Жыл бұрын

It is optional but it's a critical safety that will prevent extreme damage

@Plmg2699

Жыл бұрын

@@HVACTIME thanks for your response. Can I integrate this to a crossflow type of cooling tower?

What happens when the water pan is over flowing? I had that happen one point but that was years ago. I don't remember if they turn off the tower or the open valve didn't open and had to open it manually...

@davepeera1247

7 ай бұрын

Tower overflow in most cases is caused by faulty ball valve

@bluecavemen

7 ай бұрын

@@davepeera1247 it wasn't. I figured it out it was clogged holes on top of the CT

@davepeera1247

7 ай бұрын

@@bluecavemen ok.guessed it was the bottom basin

Does anyone know if most cooling towers are cleaned by the repair companies or by tower cleaning comp?

@adsmith47

Жыл бұрын

We service, repair, and maintain them. But we also do chillers so we are a complete package

Very informative. I hope the guy on the ground was a joke.

What exactly happens to the chiller when the water cooling tower completely fails?

@davepeera1247

7 ай бұрын

If the pump fails the chiller would shut down on the safety flow switch. If the tower fan fails the chiller would shut down on pressure switches after a few minutes

Hi. Does anyone knows a Legit online HVACR program/training or institution? Thank you.

What can cause the basin water temperature to increase?

@davepeera1247

7 ай бұрын

Poor water circulation.. Choked filler assy Choked air intake Defects in fan motor or blade

Would it be better if the tower was made out of Stainless steel?

@HVACTIME

Жыл бұрын

Yes but VERY expensive

@josels1292

Жыл бұрын

@@HVACTIME Do you know anyone that has made one out of SS in-house? It looks like a good challenge but not impossible.

Great video. But I am sorry to say, that cooling tower is filthy dirty!

The powerloss and inefficiency of a belt driven fan is insane. You lost almos 90% in the worst cases the power from the motor, it means your powerbill gets inflated and your building overheated. instead of a direct drive that has 0 power loss... thank god engineers noticed that... a little too late but they did notice.

U didn't talk about pitch angle of fans

PM so often doesn’t get done until there’s problems 😢

It’s like a giant AC system Instead of gas it’s water

Just a swamp cooler.

Ok I don't hear nothing about the wet bulb temperature design, the approach temperature, blade tip clearance, density ratio, angle of the blade. I see that the tower has 5 blades, therefore angle of each blade should be 72°. He didn't speak on the importance of how to calculate evaporation rate etc.

Don't know who is doing water chemistry but that tower is lacking by the large amount of algae.

Did he say pecker head lol

@HVACTIME

2 жыл бұрын

Yes thats what its called

No those are "drift eliminators" not inlet air whatevers.

Good lord clean your tower

50 a hour plus easy for this level of hvac diffrent level

I didn't hear anything about cooking tower effectiveness and how to determine the efficiency performance of a tower. Tower fan should not exceed 0.30kW/ton. Did he even mention tower approach. I can see in the video that the tower is not located in a good place, is boxed in surrounded by a wall & structure too close to it. Tower is located in a very low spot

“Basics”, no apostrophe needed. “Basic’s” is incorrect.

Lmao, at least you weren't speaking too softly