Buy this case, put Mini-ITX system on it *Life is complete* 👌

@theChramoX

5 жыл бұрын

try this: But ITX board on to TOP place of new phanteks evolv atx case. (nop gpu). looks stupid when MB is on top, not the "normal" place. :p

@ultraag8

5 жыл бұрын

pico itx

@bloozism

5 жыл бұрын

Put a laptop in it and run a video cable out from it

@cemoruc8810

5 жыл бұрын

Z370 i strix lets go

@ZenStrive52

5 жыл бұрын

@@bloozism four of them

Dmitri, this video could have been DOUBLE in length and I would have still been in awe. The Cosmos cases have always been some of my favorites and I really do miss having one at my home. Thankfully, they made this one even better than the previous versions in some ways. No case is perfect and especially at 400 BIG ones, WOW! And, lastly. Glad, this case got a HWC award. It's definitely an innovative case. Thank you, Dmitry and keep the videos coming.

Jeeze this case is feature packed, looked like a behemoth of a review to tackle, good work Dimitry!

@HardwareCanucks

5 жыл бұрын

It was ... 4 days non stop. It's so satisfying when we hit publish 😎 -D.

@FaceofDanger

5 жыл бұрын

What was the major flaw? I don't feel like there was one aspect that you were really critical of.

@theylivewesee1674

5 жыл бұрын

cable management

@kasper_429

5 жыл бұрын

@Ben Provost I feel like the major flaw is the molex connector on the fan/RGB hub. What is this, 1999? Ain't nobody got time fo' molex anymore. Lol.

@digitalis2977

3 жыл бұрын

@@kasper_429 As of last night in 2021, the molex is gone and replaced with a proper SATA.

A high quality case can last not only years, but many many build iterations inside... I'm still rocking this things Great Grand Daddy: 2007's Cosmos 1000!!

This was the very best review I have seen for this case. Thank you!!

i love these comprehensive case reviews.

Honestly a perfect system and case! The amount of customization means that this case can carry any and all of your future builds without the need to purchase a new case for many years to come. The carry support means that case is less likely to become damaged when moving, the filters in the front are fantastic for filtering dust and has great looking aesthetics, and the GPU angle is a fun touch for display. With the GPU angle if you use a water cooled GPU you shouldn't run into much heating problems since the water is redirecting heat away from the interior of the case leaving more air for the CPU. You could run a completely air cooled CPU without much difficulties as we should all know that GPUs kick out lots of heat so this is a perfect case for optimizing everything.

Well that was fast. Just read an article about this case today and wondered when the first reviews would go online and a few hours later you guys deliver. Great!

WHERE'S THE 2020 EDITION?!? ANY HINTS?

@tabin00

3 жыл бұрын

Yeah, I am looking for this info too. But couldn't find anything yet :|

Stunningly beautiful, stunningly expensive

Keep up the good work talented ppl!! Your content looks and sounds awesome!

Hi Dimitri, I just purchased this case and I found my version must be a revision as the fan controller has sata power connectors instead of the molex connector your model had :) Excited to start building!

@ItsReaxxion

4 жыл бұрын

ikr? mine had 2 sata powers instead of a molex aswell.

@Yatukih_001

4 жыл бұрын

I am curious. I have owned one for just a week now. What was the result like? How has your experience been? Which liquid cooling system did you choose? Greetings from Iceland!

@hage2428

3 жыл бұрын

How have ya all got the money?

@vlefteris

Жыл бұрын

Can anyone tell me if I can change the front usb c with my own 3.2 gen 2x2? Is this usb c going front with a single cable or its on an electronic board?

This case ticks all the boxes. USB 3 type-c, tempered glass, front facing i/o, mesh, dust filters, room for a CPU air tower cooler, RGB lighting options, and plenty of room for fans/airflow. After weeks of research for a case that would fit a new eatx z390 or x570 MB with 9900k or 3900x CPU and with proper airflow cooling. I finally found the case for my new build. Thanks for sharing your review for this case much appreciated!!

This is the HWC I like. It seemed like an honest review instead of an infomercial. Great job!

This guy looks like star Lord from guardians of the Galaxy

@dmasmarty

3 жыл бұрын

He's star lord's younger brother actually.

@kawai_27

3 жыл бұрын

@@dmasmarty really?

@nichoalaz6235

3 жыл бұрын

@@dmasmarty it’s really that easy to trick gullible people, huh?

Okay so I installed a potted plant in my case like you did and got no noticable increase in performance. What am I doing wrong???

Very cool case!!!

Recently got one of these cases. Its big, heavy and fully modular. Nice video btw.

The b-roll/intro master

Please help, I'm trying to put my rig together and cant get anything to turn on but the motherboard lights in this case. How many little pins should the case have to connect to the motherboard? I only see three and I'm to much of a noob to know what I'm doing wrong.

Beautiful case, leaves plenty of room and flexibility for upgrades/customization

The price is scary if you look it directly But if you break down the price, you get four 140mm casing fans going 2000 rpm, a pcie riser, fan hub, argb lightings Those are easily 100-150 dollar total or more Not to mention you get curved tempered glass, fully modular internal, plenty of drive bays, tiltable gpu bracket, and premium finishes

Dimitri, please tell me, is there option to mount power supply vertically on front? Chimney layout need airflow from bottom to top, so placing power supply in airflow way will disturb it.

Perfect to watch on my way to work

This house is just beautiful. (In addition to being packed with features :) )

WOW I love this case

It's really nice, and I'm glad they didn't add the additional window on the backside. That's such an "incomplete" idea for PC cases.

My Cosmos SE meshed is still serving me pretty well, housing my RTX 2080 FE.

It's a great looking and very functional case with lots of options, but that price though. WOW!

Nice base with the handles

Oh man, that color grade though. Mama Mia! 👌

Will there be any issues if I wanted to populate the case with Corsair ML fans and replace the fan controller with a Commander Pro?

Love it when tech channels shout each other out. Nice sense of comradery.

I just want the vertical and adjustable gpu bracket. Its insane!!!

Hey there! Quick question. Do you think you could fit a 3-fan CPU liquid cooler and four hybrid all-in-one 2080 Tis (each with their own fan) in this case?

@eddyin3d

5 жыл бұрын

Or do you have a case recommendation for a build like that?

Great review. I had been a cooler master fan for a long time but in the last couple years quality control has gone down, plus bad customer support. Decided to replace my Cosmos II with Phanteks Evolve X

I just picked this up for $160 after having a Cooler Master Storm Trooper for nearly 10 years. I'm excited to get this case running.

Wow this channel has really a loveship between them and cosmos xD

I like the improvements

It seems Cooler Master listened to customers about the Molex connectors at the hub. I just bought my C700M a few days ago and now it's just 2 SATA connectors.

I wish the cases coming out lately where as classy, high quality, and well lit as HC's videos.

so looking forward to getting this case, had to source it from Italy to the UK, freedom of building potential

anyone know the song at the end of the vid

Do you think there would be room for fans on either side of the radiator (front of case)?

I got my Evolv X and Revolt 1200W PSU. I'm very happy! I just need a free weekend to build in it. Will we see a Revolt review any time soon? Or a review of the Evolv X with dual systems? If you want to borrow mine for a review, shoot me a DM. I'm in Toronto.

@zhangirduiseke676

5 жыл бұрын

Bad taste. Evolv X ugly af.

@ulysseslee9541

5 жыл бұрын

Their channel did a review of Evolv X in the end of August

@areksoo

5 жыл бұрын

Ulysses Lee Well obviously. If you paid attention to that video Dimitry said to stay tuned for a dual PC build in the future. The Revolt X is somewhat hard to get a hold of (until recently) and getting it to Canada can be time consuming and that's why I offered up mine.

@itstrisha6607

5 жыл бұрын

Zhangir Duiseke I agree on your view though on a practical standpoint the Evolv X certainly beats this C700M. Really just about what floats your boat actually. C700M seems more aesthetically oriented, focusing on the aesthetics than the practical aspects, whilst Phanteks has a balance on aesthetics and practicality.

@billyarnold2291

5 жыл бұрын

Yes I have the same Evolv X and love it, My second build I went ahead and got the Cosmos C700m , Im using the new Asus thor 1200, and modified the shroud and bracket at my brothers machine shop, came out awesome. Im a sucker for RGB and I love my phantek since the whole thing is pretty much metal. But Having 2 2080's I love the Cosmos , it does have more plastic . But this thing turned out awesome and now they are 379.00 no tax free shipping on ebay. Brand new. I used inwin which i also love. Something about this cosmos c700m . just love it. but also my phantek. I think the mods i did with the cosmos , just so i can see the asus thor led display and lights, Just cool. something Cooler master should have did in the first place. But like i said i love rgb. the handles are good aluminum so if they made everthing aluminum on this case would have been way to heavy. Just right , my opinion. If the evolx X was as big as the cooler master I would Have loved it. I love Computer Hardware and All the new stuff that comes out , and I always mod it. to where it looks like something like factory. Glad to see other people like yourself like the Evolv X also.

$440 for a case is just insane You can get a great case for 100-150 bucks, and get a much better graphics card for the money that you saved. It's just bs.

@jdtechgear

5 жыл бұрын

That's basing a build off of a budget, this case isn't meant for a budget. This case is for those who can afford all the high end components and have the money to spend on a enthusiast grade enclosure.

@popinmo

5 жыл бұрын

100 to 150 I payed 30 bucks for my full tower 5 fan led case

@edm3184

5 жыл бұрын

Totally agree - there's some nerditude here that thinks being a smart consumer means you can't afford an overpriced case.

@Hebdomad7

5 жыл бұрын

A Toyota Carolla is just as good as a car ten times its price too. Doesn't stop people spending more to get something a little more flashy.

@jdtechgear

5 жыл бұрын

Never said he couldn't afford it. The first line is about how the price is insane for a case, my response is about those who don't care about the price which does not attain to ant sort of budget.

Do you use the same plant for ever video to show proportion?

Hardware Canucks, I have this case and i was wondering if you can help me with something. I'm getting a new motherboard and i want to be able to use both my 3.0 usb ports on the front. my current one can only use one. could help me out and tell me what headers they use please. and if it isn't too much any other wire heads I might need my current motherboard leaves a lot of unused wires.

whats the name of the sound at the start of the vid anyone ?

Did anyone told you that you look like the guy from Jurassic World who trained the Velociraptors? Totaly cool. Also, looks like a decent case for me, since i want to go all out on a custom loop with CPU and graphix card, maybe even cooling the mainboard with water. So yeah. Nice case

Can anyone tell me if I can change the front usb c with my own 3.2 gen 2x2? Is this usb c going front with a single cable or its on an electronic board?

Only one question does this case include gpu extension or I have to buy it seperaly??

Can you vertically, angled or chimney mount 2 rtx in sli? Thanks.

So... its major flaw is that it’s expensive? How is that a flaw? Saying it has a “major flaw” suggests something is wrong with it, something that cooler master did wrong that impedes the intended functionality in some way. A price is subjective and only matters if you cannot afford it...that is not a flaw that is called the way that planet earth works in the 21st century. I suppose lamborghinis, ferraris, professionally geared top tier firearms, luxury housing is all majorly flawed due to them being very expensive 🤦‍♂️ I really hope thats not what you are on about because you werent very clear on what the flaw is... if you are calling the molex connector and more challenging than average cable management a major flaw you are grossly over exaggerating and nitpicking.

@MOH-ph3qm

4 жыл бұрын

*FACTS* You proved a really good point

@GiangNguyen-timay2928

4 жыл бұрын

actually, that can count a flaw, or maybe a major flaw. Cause price can be a hole between it and its customers :D

@slayer-stevkan5430

4 жыл бұрын

Giang Nguyen Watch a Lamborghini salesman do that math.

@MOH-ph3qm

4 жыл бұрын

@@slayer-stevkan5430 lol

@morellif36

3 жыл бұрын

You're a PC SIMP

There are many, many, many people over on the Cooler Master "Fanzone" forum complaining for over a year now that after spending $400+ the RGB lighting doesn't work right on the C700M. And when people over there get upset after spending $400+ on a case that doesn't work as advertised, Cooler Master kicks them off the forum.

hmmm that glass is nice clear would go nicely to my current c700p

It looks so freaking good, an oasis in a world of simple glass boxes with no airflow, but not $240 more than the H500M good, at least for regular ATX.

Amazing video ! Fantastic review. Can you just tell me if a 360 mm radiator fits in the top with keeping ODD ? Thank you

Do they happen to sell the metal-only side panels by themselves? I'm not a huge fan of tempered glass and wanted to find a metal side panel to replace the tempered glass.

my dream case, i have the Phantom 630, love full towers !

I have own case and I like it a lot. It is a very well made product. The only issue I have is I couldn't fit the Arctic Liquid Freezer II 420mm AIO on the top. I had to mount it on the side. Not a problem but the case does advertise a 420mm liquid cooler to fit on top or the side. Other than that this is a quality product.

@andreasapostolopoulos2131

Жыл бұрын

You can definitely fit the Arctic Liquid Freezer II 420mm AIO on the top. You just reposition the fans on the top of the tray. Thus the only disadvantage is that you cant set it with push-pull config fans.

cool clip can i just ask what is the name of the music you use ?

Not notification squad, but "just happened to be on the site at the time of upload" squad

@The-Cat

5 жыл бұрын

liar ! i can see your nose popping out from here ooops nope sorry

@HardwareCanucks

5 жыл бұрын

Noice :) welcome 👍

I would love to see more cases with top oriented IO or even a front oriented, cleverly hidden obviously

As someone who does watercooling, this case looks amazing. I currently have the define R6, which I love but... Watercooling isn't easy as you'd think. Also I'm kind of bitter cause my 420mm rad, from Alphacool, doesn't fit... Even though Fractal says that 420mm rads do fit.

When useing this case, Would Corsair fans work with the fan hub in the case or does it have to be cooler master fans? Thx for a great review.

Sorry to be "that guy" but the top cutout pattern looks to be a mixture of parallelograms, diamonds and some triangles. I'm not sure what you would call it but it's not a honeycomb. The back panel for example is a honeycomb (made of hexagons). Big fan of the channel, not trying to be a jerk. Keep it up!

It finally looks like a solid effort by CM. I like it. I doubt I would go for the angled GPU mounting due to the giant hole you have to create in the back to accommodate the display cables. It looks like they've done a good job refining their inversion process too. But I do think they still have a ways to go to get to the level of cases like the BeQuiet Dark Base Pro 900. And the price? Holy crap, that's expensive. It's a nice case, but I don't think it's at the level of being worth more than the BeQuiet Dark Base Pro 900. And certainly not by as much as $190. Especially when you consider the DBP900 has some of the best build quality out there (so it'll easily stack up against this from a build perspective) and the DBP900 comes with x3 BeQuiet Silent Wings 3 fans which are very high quality and cost about $25 each, making the actual cost of the DBP900 case close to the $175 mark. I would throw out those CM fans. I wouldn't throw out the SW3's. Which is something I would think is important to consider you're working out how much you're getting for your money. The reason I'm comparing this to the DBP900 is because it's the closest analog for comparison when judging this case. I like the C700M, but I do think it's far too over priced compared to the competition. It's nice, but what does it really have that the DBP900 doesn't? Exterior RGB integration and a funky new way of mounting your GPU. But that's about it. Plus junk fans and no sound dampening material, unlike the DBP900. Aesthetics are subjective and I really like the aesthetics of both cases. But I can not find it in me to justify the extortionately higher price tag of the C700M over the just as good, if not better in some regards DBP900.

"A more expensive less user friendly Dark Base Pro 900"

@SergeySedlovsky

5 жыл бұрын

I'm building my new PC on DBP 900 rev.2 :D still have it in box, waiting to get my 2080 Ti and 9900k

@kishona69

5 жыл бұрын

Being an owner of the DBP 900 I must agree with your statement.

@sledforlife2327

5 жыл бұрын

kishona69 Same here, and less drive carriages too. Definitely like my DBP 900.

@jugostran

5 жыл бұрын

I have one too!

@juliusstevanus

5 жыл бұрын

ah DBP 900 ... i hope bequiet release PSU shroud for it, or can i use the one for DBP 900 rev.2 ?

Ahh, my favorite Canadian Russian

@jameskushman9165

5 жыл бұрын

that would be some good food , poutine with bear backstrap and vodka.Cheers

@jackapc4727

5 жыл бұрын

A canadussian? or a russianadian?

@WeRide4Snow

5 жыл бұрын

Jack L you can have a Canadian Russian. Russian guy moves to Canada, plows Canadian. And now we have this KZread channel

@FoodKart

5 жыл бұрын

*I heard FOOD !?* Check out my mouth-watering Street Food Channel videos too... :D

Very cool .

you need to take out the front double filter for air flow, angle the video card back 20 degrees and you are golden. I tried two other cases, both tt, this is great. And heavy. No other case needs consideration. Did I mention it is HEAVY?

The best thing about HWC's videos are their ads. Prove me wrong.

@maxvandervoorn1089

5 жыл бұрын

I cant.

@HardwareCanucks

5 жыл бұрын

If you guys are going to watch the ads, we want to put time and effort into them. :)

@jakesullivan3017

5 жыл бұрын

DannyBos aka the whole video

i'ts actually a nice case but geez $449USD yikes!

how does this compare to the Be Quiet! Dark Base Pro 900 Rev2 in terms of noise?

Case looks fantastic imho, but this price is insane, so I'll stay with my C700P for now :D great content as jusual, Dmitri. Спасибо!

May i know what song you used for the intro? Good video as always.

@hardwarecanucks Aligment with Rear pcie slot problem? Can you use a 90° angle hdmi conector and come out back in the black gromit? Tks for the video

One important question, is M model TG pannel compatible with Old P model?

I want a mITX Cosmos _so bad!_ "Microcosm"? "Microcosmos"? Something like that. Something mITX and custom loop friendly. I hope that's what their survey was for.

I have the Cooler Master C700M for like a month of 2 and my main hub is powered with 2 SATA's. They changed it.

you guys should check out the gps 550s from sennheiser. it would be a good follow up to the gps 600 and 500 reviews since these are new. i would like to know if they made any recognizable improvements.

The removable motherboard tray is DEFINITELY a win for me.

I agree it would be best to ship without fans. The ARGB front panel could've been better if they'd made a frosted acrylic faceplate, to swap out the aluminium shield (like the top cover), allowing RGB fans as well as the strips. My biggest gripe, however, is a lot of the component options for Chimney and Inverted layouts feel rushed; particularly with the GPU bracket for diagonal placement... If CM had delayed the case's launch until Jan 2019, they could've fixed all these issues without anyone being the wiser. Instead, they obviously didn't want to spend the time and money to make it flawless.

Can someone tell me if it's possible to have two rtx 2080ti in 45 degree?

Excellent review! My only issue is the lack of tint on the the. It'd be nice to blackout your build by simply shutting all internal RGB off. Do they offer the option of clear OR tinted glass, when ordering?? I don't mind getting the H500 without tint, but the front panel of this case screams dark tint!! I don't see the point in not going full hard loop inside this huge chassis, even running a single res/dual rad configuration with a phanteks glacier r220 for added passive cooling. I'm surprised it doesn't come with dual 200mm front fans though. Still, looks like a fun box to build in. 😎😎😎

@HardWareCanucks Even though this is a pricey enclosure, would you say it is worth the buy for a very high end custom water loop build? I can't get my hands on the Evolv X, and I don't think my radiators will fit in it sadly....

@RiftDM

5 жыл бұрын

The C700M it's designed to be watercooled :D you got 420mm on top, front and bottom

What size is this case? Full tower?

It seems like they tried a bunch of new stuff and ideas, especially with the GPU placement, but didn't really think them through. I think with some better solutions for the cable routings, for external cables, it could work. Like, placing a backplate IO port, which then has cables on the inside to attach to the GPU. Could still be tricky with cable management, but would probably be a better solution.

have you folks done a review Gigabyte Horus P3? Was looking into your lib and couldn't find it. Is it that bad? I kinda like the design of full matte black without tempered window.

hopefully one day i can afford all the things i want to buy for an extreme beautifull setup with my own money it will be a good day.

@dimagagarin6778

5 жыл бұрын

I wish You luck!

@dl88889

5 жыл бұрын

Indeed.

Anyone know the soundtrack at 0:00 ?

Love it!!!!! :)

Hey guiz! Please consider making a video on USB microphones (budget) that streamers may use to get decent quality out of their recording or for content creators. One I have in mind is the condenser omni&uni directional from 1byOne.

is the cooler fan not spinning at the beginning

Awesome case with RGB Lighting.Just brought one which cost me $700 NZD

Are they selling the angled GPU support apart? Would look so nice in my NZXT H700i!!

Still happy with my meshify c dark 😁

Is the potted plant included with this deal??

@_Randwulf

5 жыл бұрын

Sorry, Dmitry would never let "Fred" be adopted by anyone... 😎

How can you give it an award, if it has a major flaw?

@HardwareCanucks

5 жыл бұрын

Its innovative but expensive. :)

@1234munchlax

4 жыл бұрын

is the flaw that it is so expensive? @@HardwareCanucks