Coolant Drain & Fill 2000-2006 Chevrolet Tahoe, Suburban
Автокөліктер мен көлік құралдары
In this video we show how to drain and fill the coolant 2000-2006 Chevrolet Tahoe.
www.2carpros.com/articles/cool...
If you have any questions please visit www.2carpros.com/questions/new where we will answer any questions you might have.
Please use all safety precautions.
Пікірлер: 114
I enjoy the whispering aspect of the video, it makes me feel different inside
@ItsOutlaws
3 жыл бұрын
That’s called ASMR bro. Look it up on KZread, there’s many more videos with the whispering
@2carpros
3 жыл бұрын
Awesome, thank you!
Great video! It help me service my radiator my self. After you drain you may want to run some water and/or solution through the radiator get get rid of any debris. It only cost me $10 for the coolant.
You like it messy. There is a drain hose right next to the drain plug .
@seanybreeze315
Жыл бұрын
🤣🤣🤣
easy job! my 02 suburban does not have an air bleeder so this video applies to my needs. I did replace my water pump but still, this video shows how simple this procedure is to do.
Thank you for the video it helped us out a lot.
Thank you for the video
I have an 06 gmc yukon..im going to replace the engine coolant..1 gallon of dex antefreeze..with 1 gallon & water do it..or do i need to put dex antefreeze olny?
Can I use the same drain pan that I use my oil changes with ?
This really helped me today thank you
@2carpros
3 жыл бұрын
You're so welcome!
2003 Suburban Do I need to flush out and re add fresh anti freeze. 1. Blower motor runs high on 60 when increasing it goes low. 2. After running idle 20 plus minutes my reservoir loop warm. Any clue? 3. Both heater core hoses are hot. Any help would be appreciated.
@R0CK070
2 жыл бұрын
Actually is working after I ripped into system. It was the stupid selector button on the controller got switched... 😆
My radiator has no drain plug where you say it is... it looks like a dummy drain plug? idk wtf is going on.
Thanks for the video.
What about the coolant in the engine heads and block?
@jand8303
2 ай бұрын
Stop it
Where is this cover located?
I own a 06 Sierra with a 6.0 same set up as this. And you 100% have to burp the system, that have two purge valves, cause guess what, my thermostat will run high every now again, indicating I have air in my system .
@2carpros
9 жыл бұрын
Did you allow the engine to warm up to operating temperature when you were filling the coolant system with the radiator cap off?
I have a 2000 Chevy Silverado 4.3 v6 and wanted to change my coolant there is still coolant inside the tank but I unscrew the cap off the tank put a drain pan under and unscrewed the screw from the radiator and no coolant drained but I looked back at the coolant tank and some coolant was gone what could this be?
Why are you replacing the coolant cap and the radiator cap? Why not just re install them?
Subway sandwich shop just called and wants their gloves back
thank you for the video very helpful
Good video for a “ quickie “ but this ain’t no SUPER FLUSH snap snap lol I disconnect the top hose going into radiation, I stick a garden hose in radiator then flush. Last flush I use distilled water and then blend my shit up before topping off.
What number was the drain plug
So if I go 2 gallons of full concentration.. do I need to use 2 gallons of distilled water? Making it close to the spec of 4.25 gallons?
@2carpros
Жыл бұрын
Yep. Thanks for watching!
Ok what if my heater core hose broke last night and I only replaced that certain part would I still need to keep the cap off and wait till it reaches temp? It's raining and cold I waited 30-40 minutes and it stayed at the bigger line above 160 didn't go up till I capped it but now my oil gauge is going up to 80 as soon as I receive the engine what did I do wrong? Or what can I do to correct this??
@Shanonmcnab576
3 жыл бұрын
You always keep the cap off with the engine running while filling. Oil pressure gauge has nothing to do with coolant hot and cold gauge. Oil pressure gauge could be faulty/ sending unit or you have too low of oil or you filled the oil up too high or something internally in your engine could be wrong or maybe you have an oil leak. Most of the time the sending units are faulty or theirs an oil leak. If your engine runs smooth and quiet it wouldn't be internal.
@Helmuesi911
Жыл бұрын
Your oil pressure sending unit is bad
I can fill mine at all.. I put some in the block itself to prime the pump then I filled my reservoir and started it with the Heater on and no fluid moves.
This isn't a flush...as you stated!
@Shanonmcnab576
3 жыл бұрын
Cramb a water hose in and there's your flush.
@omniken66
3 жыл бұрын
@@Shanonmcnab576 But there's no hose...so its not a flush! Its a drain!
how much coolent does it use I have a 01 Tahoe getting ready to do a new thermostat
@Des420
6 жыл бұрын
Just under 4 gallons.
Do I have to burp the system???
2003 Chevrolet Cavalier has that engine coolant drain plug, but I can't find it. Do you happen know where is that drain valve located? Thank you.
@2carpros
3 жыл бұрын
It will be on the side of the block just above the oil pan flange. Thanks for watching!
@olenaerhardt7725
3 жыл бұрын
@@2carpros Thank you, I will look. Maybe you can also tell where is the bleeder screw on that car to release air from the system?
@olenaerhardt7725
3 жыл бұрын
@@2carpros I looked at that area and couldn't find. I understand it is somewhere around the oil pan. Is it more to the front, to the back, to the side of transmission, to the side of passenger wheel? I saw one bolt (same as bolts which are attaching the oil pan, #10mm), it is located higher than the oil pan bolts, very hard to reach, maybe w/a deep socket. I didn't try yet, but afraid it might be the wrong bolt.
2005 silverado dosnt have a drain plug. Do I just pull the hose off the bottom of the radiator and let it leak out?
@2carpros
2 жыл бұрын
Yep that works. Thanks for watching!
Terrible job showing us the location of the bleed valve
@nordicpride9708
6 ай бұрын
It doesn’t have one
@braydendees
5 ай бұрын
@@nordicpride9708pretty sure all trucks or cars have one should be on the opposite side of cooliant tank little plastic piece
@nordicpride9708
3 ай бұрын
@@braydendeesNo not all cars have bleed valves and this series of gm truck are no exception. Feel free to look…. You won’t find one. I’m a technician, pretty sure I’d know
@myrtlebeachpimp
2 ай бұрын
Just learn my avalanche 05 has no drain plug. And I have to remove the lower rad hose to drain it 🤦🏽♂️.
@royXax
12 күн бұрын
Not all of then have one. Mine doesn't. Had to remove the hose.
On a 2004 Tahoe, where EXACTLY can I find the drain plug? Your video zooms in too closely to the plug and because of that, I cannot determine if it is on the center, driver side, or passenger side of the radiator.
@taylormaughan7428
5 ай бұрын
Looks to be on the passenger side where the radiator is. 🫡
If you dont want problems dont touch the coolant system leave as is once you drain and refill problems will start from water pump problems to leaks and gasket again if u not having problems dont touch it
I can't find the antifreeze Drain plug on a 2003 chevy tahoe
Where does it show the line u gotta fill it up to?
@2carpros
6 жыл бұрын
It is on the side of the reservoir. Thanks for watching!
@alex.3.kitsune663
8 ай бұрын
In my experience it’s a pain to see. There is a seam somewhere near the middle of the reservoir, and the fill line is just above that. I typically have to jiggle the tank in order to better see where the liquid level is
Drivers side or passenger side?
Why you did not bleed the air bubbles out ? This way you don't have to keep checking it .
@2carpros
8 жыл бұрын
This system is self bleeding once the engine is warm
Damn plug is tight. Cant take it off!!
@victorreyes2135
2 жыл бұрын
Use some balls and remove it
Where would the petcock be on a 2006 Chevy Tahoe? I can’t find mine.
@donodom3441
3 жыл бұрын
Some don't have it. I just discovered my 05 Suburban doesn't. It can be messy, but remove lower radiator hose to drain. I did it from above easily after removing the hose contraption between air cleaner box and intake. I'm changing belts and hoses in preparation for a trip so it's no extra work for me. Dumb design though.
@Helmuesi911
Жыл бұрын
You can’t find your petcock? Did you look really hard?
can you show me where to find a video on flushing and putting new coolant in a chevy S-10 model year 2000
@aldofrausto1637
7 жыл бұрын
Matthew Berry it should be a bit similar but if you can't find any help just disconnect the lowest radiator hose you have.
@B_HarTz
4 жыл бұрын
Matthew Berry want me show you a video of how to pump gas too?
Mine is linking what do I do
@huntsvillecoin
2 жыл бұрын
Is it still leaking? Mine leaks too 05 suburban
All you did was empty the radiator you didn't flush the cooling system
@2carpros
9 жыл бұрын
Nathan Hendrickson Coolant Drain & Fill is the title a flush is different.
@DeepRthought
3 жыл бұрын
@@2carpros Except that your engine block is full with the old coolant, you only drained the coolant from the radiator.
Why didn't you use the drain hose right next to the drain plug
@2carpros
10 жыл бұрын
This vehicle is not equip with drain hose. Thanks 4 the comment please subscribe!
@silvermonk13
10 жыл бұрын
2CarPros doesn't have a drain hose???? really at 1:16 pause the video and right next to the drain plug is the drain hose u simply pull it down out of its holder.
@2carpros
10 жыл бұрын
silvermonk13 Good to know and thanks for the input!
Is it bad if you only put water in it ?
@2carpros
7 жыл бұрын
Yes do not only put water in the cooling system. You need to use a pre blended mix of coolant or get the concentrated stuff and add the water yourself. But do not only put water in.
Thanks for your effort in making this.Not sure if this is the same on other GMC models as I am searching to find this flush for my Denali Yukon XL. I lose my orientation when you show the "Drain Plug" at the bottom of radiator. Would be good to either zoom in from a rough full view of car, to the location or at least say if it is located in Passenger or Driver side/ on the bottom or side wall of radiator, or any other obvious reference. Also is there a problem if you make the 50 / 50 dilution in a separate container and add it when mixed and in correct dilution? The way radiator is to be filled or air trap to be removed, is not well discussed / shown here.As most YT clips, a higher level of sound would be nice and your video quality is much superior to most. Thanks again.
@2carpros
7 жыл бұрын
Sorry about that! It is on the driver's side at the bottom of the radiator! It will be the same for GMC models. You can dilute your coolant mixture in a bucket or something and pour it in yes, as long as you get the mix correct. As long as you fill it to the line in the reservoir, start the engine, the amount will drop just add some till you get to the line. Let the engine warm up and just keep adding when you notice it is dropping you should be good. An other good idea is to keep checking it over the next couple days all the air pockets will have worked their way out by then. Thank you so much for watching!
Thank you so much for this!
@2carpros
8 жыл бұрын
You are welcome
Question: I'm swapping out distilled water for antifreeze due to the onset of cold weather. I just got the Yukon and changed the radiator about 2 weeks later when it sprung a leak, kind of kicking myself for not just putting antifreeze in back then, but it had really old dex fluid in there and I wanted to flush it out before I put regular in. I've heard running bad dex in there for long enough can actually crack your head. I've got my reservoir full of antifreeze and I'm about to drain enough out of the radiator to concentrate up, but the car never actually seems to get to 200F so I'm wondering if the thermostat ever actually opens to let the antifreeze circulate through the engine. Can anyone shed some light on this for me?
@mdlee52
4 жыл бұрын
The thermostat opens up before 200 degrees. 186 degrees
@GodWasAnAlien
4 жыл бұрын
@@mdlee52 Thks bro
That is a quick fix!
@2carpros
6 жыл бұрын
Yep! Thanks for watching!
Can you do one for a automatic transmission change
I cant find my drain plug on a 2005 Escalade
@2carpros
5 жыл бұрын
Should be on one the bottom corners of the radiator. Thank you for watching!
@groofromtheup5719
4 жыл бұрын
@@2carpros just a hole where it is shown on the video on my avalanche. nothing in there I can feel with a finger.
@UncleSarkis
3 жыл бұрын
2004-2006 does not have the petcock.
where is the fill line?
393 thumbs down got air in the system?
No drain plug on my radiator, 06 Silverado, where else might it be?
@2carpros
Жыл бұрын
Might not have one. It would be somewhere on the bottom of the radiator if it did. Thanks for watching!
I use the word drain plug because I feel to awkward to say petcock.
@Helmuesi911
Жыл бұрын
Say it... petcock.. say it
Check your manuals because distilled water should not be in these engines. Tap water
@monteclark1115
2 жыл бұрын
The manual specifically says distilled water. NEVER use tap water in ANY radiator
@Helmuesi911
Жыл бұрын
@@monteclark1115 Actually I’ve read the manual.. it says clean drinking water.
@monteclark1115
Жыл бұрын
@@Helmuesi911 I don’t know what manual you are reading but it’s wrong. I have a manual also and it says 50/50 dexcool/distilled water. Drinking water contains minerals that will cause mineral deposits to accumulate and clog the radiator. Tap water often contains chlorine which will oxidize steel and aluminum parts.
@Helmuesi911
Жыл бұрын
@@monteclark1115 I use distilled water myself.. I was referring to the owners manual for an 05 Chevy Express, sorry. But it does say clean drinking water.
I own a 06 Sierra with a 6.0 same set up as this. And you 100% have to burp the system, that have two purge valves, cause guess what, my thermostat will run high every now again, indicating I have air in my system .
Do I have to burp the system???
@2carpros
10 жыл бұрын
No simply start the engine and allow to warm up to operating temperature with the radiator cap off. Add coolant if needed.