When you spray the door frames with oil paint and it gets on the walls, does that effect the water based paint going on top.

@ThePa1nterhowto

2 жыл бұрын

Any oil-based undercoat can be used and any water-based paint can be used directly on top of this.

@anthonyb8208

2 жыл бұрын

@@ThePa1nterhowto Thanks Greg, it pays to ask a pro.

Another great project you have rattled out Gregory. In the U.K. for a quick dry oil based option I’d reckon Coverstain in the Zinnsser range is equivalent to your Dulux can there. I always have it in the van as it’s the best primer for just about everything that crops up. Your right about the amount of gear we take to sites now. My clients always comment on the stuff I take lol. Perhaps it’s because the previous decorator had just a scraper, duster and a bit of sandpaper. Cheers

@ThePa1nterhowto

2 жыл бұрын

Your a professional for sure

Nice one mate its something I face all the time and I'm always looking for the easiest way to go from oilbased to waterbased. Thanks again

@ThePa1nterhowto

2 жыл бұрын

I always have a qd oil undercoat for this reason but on some smaller areas that don't really matter I sand and water base also.

Awesome job mate...all the best for the new year

@ThePa1nterhowto

2 жыл бұрын

Thank you, Merry Xmas and happy new year

Looking good. So many don't do this and just bang on with a waterbased top coat over old oil. Merry Christmas

@ThePa1nterhowto

2 жыл бұрын

Merry Xmas Phil, Its a major decline in the quality, I'm glad I don't have to work on those houses in the future.

Great work. Is there no water based primer for use over previous oil based topcoats? My skirts, traves and doors were painted 15 years ago with Dulux Super Enamel Semi Gloss, still looks like new but needs a colour change. Want to spray them with wb enamel and trying to avoid using oil as the kids cant handle the smell and will still be living in the house while repainting. Any advice on a suitable water based primer that can be sprayed?

@ThePa1nterhowto

2 жыл бұрын

Yes, you can use a water-based undercoat specified for old gloss, however, for each one of them you "have" to sand the surface prior to painting, this is a lot of extra work for nothing and then there is a high chance every time you knock the skirtings, door or frames with a broom, mop or chair you will chip paint off. So really it's up to you, I'm afraid there is no other answer I can give you. Quick-dry oil undercoat drys fast has minimal smell and is bulletproof, skirtings, doors, and frames are an especially important place to undercoat properly. You only have one chance to undercoat properly.

The water based b.i.n sealer works mint to thats my go to these days . I used to use pigmented sealer but the smells to overpowering. Did it still stink of the oil base sealer when you finished .

@ThePa1nterhowto

2 жыл бұрын

You will see next morning on this video, I could smell the paint so if the customer has an issue with smell, I would stick with your water-based. However, I always tell the customer that I am using a very powerful primer that sticks much better, and for a short-term discomfort, it's a long-time gain.

G’day, saw you were using 208 for the oil primer did you need to strain the paint also which mesh filter did you use,? I’ve had trouble with some oil based primers sealing over the filters

@ThePa1nterhowto

2 жыл бұрын

Never had a problem with that happening, I normally use a yellow filter for all my paints but it is possible I had a red filter in as the tip is quite new, but on the other hand, I did spray my cupboards straight after so 80% chance it was yellow. The paint was unstrained and not thinned out.

Hey mate great vid. I was curious to know if you've used the taubmans ultimate enamels before.. Wether it be alkyd or non alkyd

@ThePa1nterhowto

2 жыл бұрын

No I've thought about it but I never have

@romunski557

2 жыл бұрын

@@ThePa1nterhowto ah no worries. Was. Going to see if you've ever sprayed it before. What water based enamel did you use in this video?

@ThePa1nterhowto

2 жыл бұрын

@@romunski557 taubmans pure performance satin

How come the change to water based from oil? The gloss work looks amazing and as you say is pretty much bulletproof, why not just go over them with another few coats of oil based if they wanted a colour change? Did the client specifically ask for it to be water based?

@ThePa1nterhowto

2 жыл бұрын

Even if i wanted to go oil based, I would need to sand before gloss,possibly undercoat again and then spraying oil based gloss enamel on rainy days is a big nono so I would have to brush all frames and window boxes and my dominant shoulder is injured so impossible for me. I did everything right the best way for me.

@arf8u

2 жыл бұрын

@@ThePa1nterhowto ahhh. That makes sense. I didn’t think about the weather impacts. It’s interesting to understand why you used different products at different times. It’s why you are the pro and I am not. :)

Hi I know you have been trying a lot of different water based gloss enamel what is your favourite full gloss if there even is such a thing in water based paint . SteriGuard Full gloss vs Aquanamel And have you tried the new dulux fast finish water based enamel hearing lots of good things about it What is your number one favourite

@ThePa1nterhowto

Жыл бұрын

I'm painting a house next week and asking myself the same question, I'm buying dulux steriguard satin because it's winter here and that's one paint that I've found doesn't run easily, that's my main reason to use it and the finish is good as well. I haven't tried fast finish but avoiding it because it apparently doesn't brush or roll properly.

so you didn't sand those glossy frames at all? I normally slightly scuff them. Man if you like that oil based primer you gotta try OIL BASE ZINNSER

@ThePa1nterhowto

2 жыл бұрын

No sanding if you use oil based undercoat

@onlymemories2595

2 жыл бұрын

@@ThePa1nterhowto I think it helped as the oil based had years to yellow.

@onlymemories2595

2 жыл бұрын

@@ThePa1nterhowto no water based primer will ever beat oil aye

@ThePa1nterhowto

2 жыл бұрын

@@onlymemories2595 You got that right

@ThePa1nterhowto

2 жыл бұрын

Thats the huge benifet to using oil, no sanding at all,just prep after