▼EXPAND THIS SECTION FOR MORE RESOURCES RELATED TO THIS VIDEO▼ ★THIS VIDEO WAS MADE POSSIBLE BY★ Trend Stealth respirator (original): amzn.to/3vyuKfS Trend Stealth Lite mask: amzn.to/3C6cmNQ *Please help support us by using the link above for a quick look around!* (If you use one of these affiliate links, we may receive a small commission) *Check out this playlist of our other finishing videos:* kzread.info/head/PL-gT7JMZFYje9AEX4bPTmWUZV9qyZRYi9 ★SOME OF MY FAVORITE CHEAP TOOLS★ -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Irwin Drill Bit Gauge: amzn.to/2AwTkQg -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Punch: amzn.to/2QvbcrC -Self-Centering Bits: amzn.to/2xs71UW -Angle Cube: lddy.no/10nam -Steel Ruler: lddy.no/10mv7 -Utility knife: amzn.to/3nfhIiv -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Digital depth gauge: amzn.to/3mwRf2x -Wood Glue: amzn.to/3mqek6M -Spade Bits: amzn.to/3j8XPtD ★SOME OF MY FAVORITE HAND TOOLS★ -Digital Caliper: amzn.to/384H1Or -Marking Gauge: lddy.no/10muz -Marking knife: lddy.no/10mv0 -Narex Chisels: lddy.no/sqm3 -Stanley Sweetheart Chisels: amzn.to/3y5HDOc -Mini Pull Saw: amzn.to/2UEHBz6 -Gent Saw: lddy.no/ss2x -Coping saw: amzn.to/2W7ZiUS -Shinwa Rulers: lddy.no/zl13 ★SOME OF MY FAVORITE POWER TOOLS★ -Miter Saw: amzn.to/3gqIlQ8 -Jointer: amzn.to/3yc3gfZ -Planer: amzn.to/3mn6BGF -Router: amzn.to/3grD22S -Sander: amzn.to/3DdvD0Y -Cordless drill: amzn.to/3D9ZiIm -Brad nailer: amzn.to/3gsRkjH -Mini Compressor: amzn.to/3mvrmQr -Bladerunner: amzn.to/2Wl0TtJ -Jig Saw: amzn.to/3zetTBY -Scroll Saw: amzn.to/3gq9qDc -Multi-Tool: amzn.to/3muZuMi ★SOME OF MY FAVORITE OTHER TOOLS★ -Drill Bits: amzn.to/3B8Ckzh -Forstner Bits: amzn.to/3kk3wEI -Shop Vacuum: amzn.to/2Wkqnbl -Machine Setup Blocks: amzn.to/3gq7kDh -Counter-Sink Bit: amzn.to/37ZukUo -Featherboard: amzn.to/3DeqHsq -ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7 (If you use one of the affiliate links above, we may receive a small commission)

@DestroManiak

Жыл бұрын

Lite mask link doesnt seem to work for me.

@bobbray9666

Жыл бұрын

@@DestroManiak Same here.

@ascalon132

Жыл бұрын

@@DestroManiak Same

@ardnaxela1405

9 ай бұрын

Hi! thanks for the video! Do you have a link for a video on applying water based polyurethane?

@sethhorton49

2 ай бұрын

Do you have a video done for water based? When to use water based versus oil based?

I'm going to put my 2 cents worth in here and a lot of you will probably not agree with me but please hear me out before pooh-poohing my statements. I've been finishing bare wood for more than 40 years - cabinets, furniture, floors, and a lot of custom high-dollar rifle, shotgun, and pistol stocks. The one thing I know to be true when staining and varnishing wood is the more you sand the more grain you will see, Now, let me clarify this statement - I start with 150 grit paper then move to 220 grit - just as most people do. But if you really want to have eye-popping grain and super smooth finishes then you need to take it further. After the 220 grit I move to 320, 400, then 600 grit. I always do the 220, 320, 400, and 600 grits by hand - NEVER with a machine. Waste of time? Not hardly, I've tested this process and there is definitely a huge difference in grain appearance and the smoothness of the final finish. It's the proverbial "night-and-day" type of thing. Once of my most cherished pieces is a dining room table made of birch and stained a dark ebony to get a Japanese "black lacquer" appearance. This table has such a deep and lustrous appearance that you'd think I spent days and days rubbing and polishing it. Actually, after sanding to 600 grit and staining, I put 3 coats of Minwax Gloss Polyurethane - sanding with 600 grit after the first coat then using 0000 steel wool after the second coat. The results were outstanding. Super high gloss but you can still see the wonderful grain showing though. So take it from me - sand, sand, sand if you want a truly unique finish.

@veguitars

6 ай бұрын

Nice description thx :-) in many places I often hear that going beyond 320 can cause issues with wood accepting stain uniformly. Have you experienced this? Cheers

@vikassm

6 ай бұрын

​@@veguitars Only 'natural' finishes are problematic with finely sanded wood. (Hard wax oil, Tung oil, etc) Synthetic finishes - Sprayable varnish, Acrylic, PU top coat have zero adhesion issues even with 2000 grit sanded panels. After all, these finishes are the most widely used kind of finishing for automotive paint! (2000 grit sanding is more or less a mandate here 😜)

@braxt27

4 ай бұрын

@@veguitarsI would sand to 220 or 320 then stain and then go maybe 400 or 600 between stain coats and finish coats

@braxt27

4 ай бұрын

I agree I have always gone to 600 even higher sometimes and it comes out really nice with a good finish

@liquerinfrnt

3 ай бұрын

​@veguitars the trouble accepting stain comes from the wood grain becoming packed with fine sawdust from high grit sanding. By sanding with the grain by hand, the sawdust is cleared out of the channels allowing stain to penetrate evenly.

Prime your brush with mineral spirits (or water for water based) and shake it out before that first dip into the poly. It will clean up easier and last much longer. Love the sports bottle trick.

@yamahabiker1937

Жыл бұрын

Also helps eliminate bubbles.

@jageo48

Жыл бұрын

Great point, JA! Another tip is to use a prick punch to make holes in the rim groove for the lid, so that most of the excess will drain back into the can. As the can's content gets used, lumps of dried and hardened finish will prevent proper sealing.

@kenerickson4923

Жыл бұрын

That was I was going to say. I usually forget until I have already dipped the brush 🙃

@bertsrake

Жыл бұрын

@@jageo48 If it's expensive paint or finish I'll actually pour it off into a fresh can if I'm trying to preserve it for future use. But yeah this is a great idea to save the fuss.

@bertsrake

Жыл бұрын

@@Mainbusfail Thanks. I'm actually a hack woodworker but love this channel and hope to set up a real shop someday. But my dad sold ultra high-end paint and brushes (fine art stuff) back in the 50's and 60's and it was the one real life hack he taught me. Don't skimp on brushes and keep them clean and they will last decades. It's proven to be true.

I used to spray in an industrial setting shooting oil based paint all day. My favorite mask was the blue Belcamp masks from NAPA automotive supply stores.. I don't know if they're still available, but they were less expensive than 3M, had a MUCH better fit and seal. Now I have a 3M just because I don't need it nearly as often. If you're spraying a lot, and by a lot I mean upwards of 50 or so gallons a week you should get a fresh air supply system that covers your entire body because you will absorb the solvents into your skin and will probably eventually wake up completely numb from your knees and elbows down to fingers and toes like I did.. I wear a mask no matter what I spray, no matter how much time I might be exposed. I had to learn the hard way when companies didn't care and neither did OSHA ..

@noi5emaker

Жыл бұрын

Great GREAT advice. One thing I just can't get through to kids is how that stuff builds up, even if you're using an aerosol once in a while. Of course, being young they're "bullet proof" and it's just not "cool" to be careful! I'm with you - I wear a mask every single time I spray. It really isn't worth gambling with your health. At the end of the day, that's ALL you have!

@jessegriffin9

Жыл бұрын

👍👍

@IkesThePyro

Жыл бұрын

@@Zzrdemon6633 I was applying for a cabinetmaking job a few years back when I met an older lady who was their main finisher. You could tell that when she was younger, she'd be an easy 8.5-9/10. I thought for sure she was 45+. Nope. asked my buddy who worked there. She was 32. 32! She smoked and sprayed all day.

@rickmartin7674

Жыл бұрын

Aw man, sorry to hear that. I have peripheral neuropathy as well (for other reasons) and it's not exactly fun.

@bethoughtprovoking

Ай бұрын

I’m in this one, too. Yes. Always wear a full-face respirator and body suit. No matter what you’re spraying, waterborne or solvent-based. When I suit up to shoot 2K solvent-based polyurethane, I can’t smell a thing; if you smell the solvent, it means you’re not completely protected. And, as every finisher knows, this stuff (especially the catalyst) is really nasty for your health. So, take the right precautions, and enjoy the aesthetics-and superior durability-of a spray-on finish! Once you’ve mastered the gun, you’ll never trade it in for anything else.

Another quality lesson in the subtlety of woodworking. Thank you Stumpy

I simply do not understand how you manage to create good videos so frequently. Thank you Stumpy Nubs, I enjoy this one.

I really appreciate the depth of information you give. Thanks so much!

Thanks James, great sanding and sealing techniques. Stay safe, Fred..

Good work bud, absolutely love your insights. Very helpful for people who are past the beginning stages but have no real clue what we are doing. Cheers mate!

Thanks James.

Terrific presenter . Clear,articulate. Knowledgeable .

As always, on point! You always present everything in easy to understand, but super thorough detail, that just is so elegant. Even your smooth, even voice makes for easy listening. You sir, are a born teacher! Woodworking is just your side-hustle! :)

Amazing, easy to understand, well thought-out tutorial. Thank you! ❤

Excellent video - great advise from a craftsman.

Thanks for being very informative and concise with the information. You’re my go to for woodworking advice!

Love how you used just the tip with long, light strokes. Came out nice!

The Stumpster dropping QUALITY KNOWLEDGE for us all to soak up, like the wood does with that thinned out Poly. 😀👍

I used to have spare brain cells, well that was before you went and filled them up with all that knowledge about polyurethane finishing. Thanks Stumpy, I've got to go and get a respirator now.

Not trying to sound like a fan boy here, but I really love your content and presentation. Been following for years and it still keeps me interested and informed every time.

This was so well explained and so detailed. Thank you for sharing your knowledge and expertise with us all. God bless you.

Wipe on oil poly is my favorite finish (aside from shellac on small projects) and my process is nearly identical to yours. Never could get a good finish with brush on! I'll have to keep trying.

So glad I stumbled upon this page! Your videos are great.

I was a master woodworker for 3 decades. I loved sanding & finishing my projects. Always seemed like desert after a complicated build. For polly I used a 2-3 wipe & 2-3 brush (or 4-5 HVLP coats).

I’ve used old crumpled grocery bags between coats to knock down nibs. Very nice video, thanks.

My late father in his day use to hand paint coaches and when I started to make wooden signs, he showed me how to polyurethane them. I used to get a mirror finished with about 8 coats, the first coat was thinned, the rest not. I used to to go across, diagonal and finally with the grain wiping my brush of with every wipe. Perfect.

I bought the Trend mask on you recommendation after one of your other videos. I've used many masks over the years and the Trend is the best thing since sliced bread !. A tip I got from one of my co workers a few years back in relation to the final coat of varnish. It works best when you are working on a flat surface, ie. you have a door on trestles or a bench. As your varnish is getting tacky, spray a fine mist using a trigger spray bottle, from above of whatever the recommended thinner medium for your product is. It doesn't take much, but it evens out the surface of the coating. I tried it on my new oak panel doors and they looked like they had been factory pre finished. Try it on some off cuts, it will cost nothing but a spray bottle and varnish. Keep those videos coming.

@williambranham6249

Жыл бұрын

To be clear, are you saying to use thinner only in the spray bottle? Thanks in advance.

@loki7441

Жыл бұрын

@@williambranham6249 Yes William, whatever your chosen varnish suggests for thinning. Get the mist as fine as you can and hold it at extended arms height. White spirit as we call it here for oil based varnish. I've used the same procedure to finish gloss lacquer on the final coat on a model, using an air brush and it leaves a glass like finish. As long as the dogs dont wander into the area.

@williambranham6249

Жыл бұрын

@@loki7441 Thank you! USA

@loki7441

Жыл бұрын

@@williambranham6249 Good tips should be spread to those who will make use and appreciate them. Hope it works for you.

Thank you for this! Wish I saw this video a few weeks ago. You're awesome!

I love idea of the sports bottle and someone suggested priming your brush with the solvent that is consistent with the product your applying. I almost never use poly straight out of the can. Add just a little solvent helps it to lay down nice. It’s typically not enough to add much more than an extra coat but it will probably keep you from having to sand between coats. Never go cheap on brushes. It’s just not worth the savings. Besides a good quality brush will last for years. Keep it clean, really clean.

Please consider making a video on how to apply finish to furniture pieces. Especially the inner corners are a pain to finish and sand before next coat.

Trend Stealth works great for me. Superb fit

So helpful as always. Would you ever do a video about spray finishes with some recommendations? Having a really hard time figuring out where to start.

Glad you mentioned turpentine. I like to use it for thinning poly. I think it gives a better feel. The finish seems to flow on more smoothly. Mineral spirits works just fine, of course. Just my preference.

Thank you for this easy to understand video, sir.

A very helpful, well-presented video. Thank you from a first-time crokinole board maker. 🏴󠁧󠁢󠁳󠁣󠁴󠁿

You can use a paper coffee filter instead of a piece of paper bag..

This was extremely helpful! thank you

I have a trick for finishing porous wood to get a glass smooth finish quicker. Sure, you can use grain fillers but also you can fill the grain pours with finish. Use the full thickness finish and pour some on the work piece then using a flat knife or body filler spreader (Bondo Spreader) and push the finish into the pours while leaving a thin a coat as possible. Sand and repeat if necessary. Or continue with your regular finishing methods. If finishing a stained piece sand very lightly only to get the main bumps down as the finish will be super thin.

Never heard the "brown paper bag" trick before. Good tip. I'll try that on my next varnish finish.

@befmx31

Жыл бұрын

I learned that technique from Steve Ramsey from Working for Mere Mortals. It works great. Try it, you will be pleasantly surprised at the finished product.

@richardlug6139

Жыл бұрын

@@befmx31 I also would find his tutorial on how to apply ploy. I did not like the way Stumpy brushed it on, he worked it to much, you should not apply it like you paint and that is just what he was doing.

Another great video full of great tips. Thank you so much.

Great video. I learned stuff! To quote Stumpy, this video was slick as snot!

Another great video...... I use 4 ought steel wool between layers.....

I assume that the same procedure applies more or less when you stain the wood first, no? Also, I really appreciate all the great video tutorials you make available. I watch one most evenings before bed and I have learned a lot. A sincere thank you …

I use a 10 inch flooring finish applicator for furniture (the foam kind not lambskin) it is very quick and easy to leave straight even coats with it for any flat surface.

I'm a paid professional. I've made hundreds of pieces of furniture. I pay to live by doing it. And it's amazing how much I still have to learn. Thank you for being such an amazing place to learn from. One day I'd love to be your "competition" here on the tube. But that is out of admiration.

Being a professional finisher and owning several thousand dollars in spray equipment with access to I dustrial finishes makes me feel incredibly fortunate when I see what hobbyist finishing entails.

Love your work 👍

Great tips. One thing not mentioned is the primary reason/benefit of thinning i.e. the reduction or elimination of bubbles that form in unthinned poly.

Slick as snot! I like that. Good video, James.

Always the right way to do it.

Thanks for the detail & choices. I am not knowledgeable about finishes.

Forgot to mention you will need EXCELLENT lighting to be able to see any runs. Without good lighting they are practically invisible.

Searched for this video specifically to use your (Trend) link to buy from your sponsor--thanks for the great videos!

don't know if I missed it or so, but the wipe on has some other advantages, for all kinds of finishes. first, it can penetrate deeper. it also follows the wood structure better and doesn't "pool up" in little dents and divets. this can be a benefit if you have some mix of sanded and structured wood surface. similar for surfaces with very varying grain structure where one soaks up about everything, its easier to work with using thinned out. you can experiment and also brush on thinned and wipe off etc.

I always thin my 1st coat 50/50 to seal. If wanting to end up with a semi-gloss or satinfinish I layer my 1st coats with high gloss and top coat with the semi-gloss or satin. I believe this won't obscure the wood grain as mush if you just coated with semi-gloss or satin.

@Rizara360

Жыл бұрын

something else youre doing that you maybe not be aware of, higher gloss levels boast a harder surface, so if something were to eventually scratch your finished product, its less likely to penetrate the high gloss coat, meaning its fixable without stripping down your entire finish. just fill with new poly, sand the fill down smooth with the previous layer, and repeat your final coat

Thank you for the video as I'm doing a kitchen bench with live edges for the first time, I want it to look nice and don't want toess it up so your video is greatly helping e with my choices on what to do and use. Thanks again for the very well done video.

I love this channel. My finishes take months... I wish I could cheat it faster but I do enjoy the luster of taking one's time.

One thing missing from *every* wipe/brush finishing video, on every channel, is them doing it on an actual project, and not just a flat board. I've been waiting years for someone to actually build some boxes, or whatever that has multiple sides, or curves, or just anything that resembles an actual project, and then finishes them with poly, shellac, etc... by hand. My issues have never been with a flat board, it's when I get to the corner of a box, and need to move to the other side without letting any build on that corner, or to get it around the curve of a two sided object. Basically, KZread is crying out for a real world, actual project finishing video... especially on smaller, detailed things, nut just a giant table top and square legs. The only people who seem to show finishing on detailed, real projects, are those just demonstrating their cool, expensive sprayers. How do I poly my boxes without leaving any marks? How do I do a piece that wraps around and has two faces that are vertical? Another video idea is how the heck to appropriately apply glue on projects where you simply cannot get in the space to wipe it off with a wet towel, or get it with a scraper, because it is so tight you already had to pre-finish the inside. I love this channel, and this is a great video... I just always get bummed when another finishing video is just on a flat piece of wood. People, like myself, need real world examples. Not many people are just wiping their poly onto a flat piece of wood, laying down on a bench. We have a project finishes, even just a box, and that is where we are trying to apply the finish. Cheers.

@theleftwich1

Жыл бұрын

Totally! Even figuring out how to set up a piece for drying correctly can sometimes be a challenge, and I'm sure there are go-to techniques to make this eaiser. (I'm thinking of avoiding dimples with finishing the opposite side, etc)

@nightcatarts

Жыл бұрын

The general idea if you've got a problematic area is to apply more, thinner coats. Tilting the piece to ensure the working face is as level as possible can also help where possible. As for glue, I've had luck in tight spaces with bamboo skewers. Cut them & sand to a shape that will match the profile of the bit you want to scrape & then run it along there at an angle once the glue has begun to thicken up. It should be at the point where the glue will come up easily & will travel along the skewer a bit so it's easy to remove. If it bunches up then it's too wet, & if the skewer bounces off the surface then it's too dry.

@Jack-es9xq

Жыл бұрын

Welcome to the world of a new home construction painter. A library full of cabinets with doors and drawers is a combination of nightmare, masking, and problem solving master class. You have two choices - brush everything or spray everything. I recommend getting good at using a compressed air HVLP process.

@valvenator

Жыл бұрын

If working on a home made project I try to get as much finish on the individual pieces as possible before final assembly. Than do a final coat after it's put together if needed. When refinishing an old piece however I just do one or two sides per day depending on drying time. Yeah it takes much longer but it beats having drippy saggy poly on your finished project.

@marksatterfield3100

Жыл бұрын

This is why a wipe on finish rules. Maybe takes more time but a LOT easier and forgiving. I like a 50% poly, 30% thinner, 20% boiled linseed oil. Flood it well initially. After 15 min wipe off excess, buff with 0000 steel wool between well dried coats, final buff out with wax and more 0000 steel wool. Mis dos centavos.

TYSM

I spent a lot of years painting professionally I don't think there is many products that I have not used. I appreciate the information you bring to the table. All of it is good solid information. I don't recall you taking about making adjustments to your polyurethane to deal with changes in humidity or heat. you can not always paint in perfect weather so you need to make adjustments to deal with the weather changes. I almost never use polyurethane straight out of the can. I typically thin it a little bit just to get it to level out on the surface a little better, it slows the drying little bit and allows me to dry brush it for a more consistent finish. This will help to keep from scrubbing the finish, better to thin it a bit to get a better finish, I have often started by applying the first coat thin, (wipe on) that way the product sinks deeper into the surface. I think that if you have the time, wipe on is going to give you a better overall finish, yes its a lot more coats but well worth the effort.

Thanks for the many quality videos. I have purchased a mask from your sponsor to support the channel

Wiping method is especially useful on items with a lot of "joints" like chairs, things with spindles, shelving units, etc. Brushing and keeping a wet edge is tough when you have something like a chair with 10 back spindles. Bob Flexner also calls it a very foolproof method.

Here in CO, our ambient humidity will end up being around 15% for a lot of fall winter and spring. If you are like me, you'll need to thin every finish at least a bit. it is very difficult to brush on water based finishes here.

Instead of wiping the brush against the edge of the container, load the bristles, then tap the bristles against the inside of the container. It will hold more finish, but tapping removes the excess sufficiently. Give it a shot. Love the sports bottle trick!

Woodworking is like life - it's not how you start, it's how you finish! . 😄

Nice to have a brush box to susupend brush in solvent and brush spinner for oil base clean up.

Minwax has a "Wipe-on Poly" they sell. I'm definitely going to try your thinning method with some regular poly because I think it would be more cost effective. But I really like that wipe-on that Minwax makes, and if I hit it with this car paint finish sander I got afterwards it becomes so so smooth. Anyways, great video as always. Thanks a lot for all the info, have a good day!

Nice presentation and very accurate

Excellent tips, James! Thanks! 😃 What about starting with wipe on poly and finishing it with the brush? Anyway, stay safe there with your family! 🖖😊

6:50. Also 'dry brush' with thinner coat to flow the highs into the lows, breaks the surface tension of the highs. mix in a touch of finish to slow the thinner flash off. Watch out for pilot lights and other forgotten flame and spark producing equipment.

Excellent. All I can say.

I like using a thinner poly, the thicker sometimes gets too sticky when using it.

To slow down drying time in summer, we often add a small amount of "Penetrol". That also helps make brush marks completely disappear. Also... instead of using wet cloths (water or alcohol) on wood to wipe any dust off before painting, we are using "tack cloths". 🤘😎 I love this channel!!!

My introduction to poly was stressful. I was making a 4x8' turtle habitat out of plywood, and I had some pretty big pieces. Now I know I was fighting myself by doing the finish in the same garage that I was doing the sanding. I had a bear of a time getting the finish to go down without bubbles, and I was using the same product you are, and brushing it too. I wonder if some of the bubbles were dust-caused. I wound up doing MANY applications and sanding in between, and learned just what kind of scratch the finish will tolerate filling in. So it wasn't all a loss. I tried brushing, thinning and wiping, staining pads, and even "brushing" with those weird rectangular pad things that puts down a lot of finish in one swipe. I eventually got it done well enough, but what a learning experience. I wish I had found your videos first, but I probably would have landed in the same predicament, knowing myself.

As usual very good!

I found another use for polyurethane and that is over flat latex paint. I made some cabinets for my and because I use working on vehicles as well as woodworking I wanted a cleanable surface. I tried satin polyurethane instead of satin latex paint. I've never liked semi gloss or satin latex paint for durability. It never seems to really dry and it stays somewhat soft. So I shot my finished cabinets with polyurethane. Its been a few years now and finish is holding up well. I can get oil a grease on it and it wipes right off.

@robertnichols917

Жыл бұрын

Oil based poly?

@richardlug6139

Жыл бұрын

@@robertnichols917 You want to use water base, the oil base will yellow light color finishes especially white.

Great video refresher, thank you. However, you mentioned this was great for indoor (agreed) and some outdoor projects. I am currently making some small Cedar wooden signs for the outside. Will this be a good application for that project? Thank you

I'd add two dont's for the rag: Strong, contrasting colours (unless you like red dots on your pale birch) Very worn out cloths - they are more likely to release a ton of fibres/dust. Painting - one would think that by now I had run out of things to stumble over... But I always find something new.

I like to wrap my brushes in plastic wrap or aluminium foil. This works well for rollers if you need to make a run to the hardware store or have lunch. (Sometimes works overnight)

Thanks for the great video, I can't believe I am taking advice from a Redwings fan, but I guess I will.

For those beginners I want to add that the fine print on the can of polyurethane advises that while drying time can be a few hours to overnight or so , that cure time can be 15 days and longer. The difference between dry and cure is that you can light sand after drying but in order to use or to to place objects on a finished piece the finish should be allowed to cure. Also there are temperature and humidity considerations that affect drying time which are explained on the can as well.

@greenpea9412

Жыл бұрын

I just learned that the hard way. My end tables turned out amazing and because a couple days went by and it was dry to the touch we put the lamps on them. It did not take long to leave marks in the surface. Dry and cure dried are two different things for sure.

@williambranham6249

Жыл бұрын

@@greenpea9412 One of the deficits of our educational system is there is not enough emphasis on “read the fine print” . Going forward, fine print is more important than ever.

Instead of using semi-gloss and satin finishes, just use hi-gloss and buff the final coat with 0000 steel wool. The flattening agents in the other finishes also muddy the grain patterns of that nice beautiful wood with the extra special grain patterns that you spent beaucoup bucks on. If you feel you must use the semi or satin, get yourself a small can of that for your final coat and use hi-gloss underneath it. The sheen will look the same, but you'll see and enjoy the wood a whole lot more.

@michaelwarren2391

Жыл бұрын

I've used pumice and/or rottenstone (mixed with water to form a paste) to buff out the final coat of gloss. Worked well for me.

@SunLlamaMama

11 ай бұрын

I’ve got a butcher block island with my kitchen sink! Ive been searching for advise from professionals on the best sealant. They all say food grade oil. But I won’t be prepping food on it. Then they say gloss but I hate, hate, hate the shine. LoL, it’s been over a year with no finish bc I’ve been conflicted about finishes. I really like the idea about starting with a gloss and finishing with an end coat of satin. So glad you commented.

Here in New Mexico, it's dry. 8% humidity usually. Polyurethane and tung oil are my preferences. I just dip a shop towel in the can and wipe it on. I use only gloss. If I want a satin finish, I scuff the part, dilute it 50/50, and wipe it thin. The only other finish I use is amber shellac. Those have to be kept out of the sun or they develop "crazing".

Slick as snot (on a glass door knob) Haven't heard that one in a while!

I really like oil based poly, and have used it for years. But I always have brushed it on, or wiped. Have you ever used an HPLV sprayer? I’d like to refinish a kitchen table and I’m considering spraying it, but would like your recommendation.

So, I don't rightly know, but I've always heard you shouldn't move the brush back and forth as we see here because it is more likely to make air bubbles in the finish. I've always gone in one direction only, or at least made sure the brush came completely off the work piece before changing direction. I don't know if it actually matters, but it gives results I'm happy with.

Can I use the wipe on poly method over a wooden drum shell where I've used Tru Oil? It's curing right now. It has about 12 coats of Tru Oil with the last two thinned with Mineral spirits. I'm looking to add a thicker protective coating so the Poly seems like a great option. I'm sure I would need to lightly sand the True oil finish before adding the poly. Also, it is a rounded shell ... could I wipe on the poly by dipping the towel/rag in the liquid instead of pouring some on the shell? I fear it would run down the shell if I poured it on. I worked with the shell suspended by a piece of wood through the middle so that I could easily rotate it. Thank you ... your videos are gold.

You should try General finishes wipe on gel polyurethane finishes and stains. I love the stuff. It is a joy to apply and smooth as silk. (Disclaimer: I have no affiliation with the company).

"slick as snot"! Now THERE's an expression I haven't heard in a LONG time! We used to say "slicker than snot on a doorknob"! Always enjoy your videos and appreciate how you keep the information simple and EXPLAINED without any silliness or need to entertain like a lot of guys!

@JamesBiffle

16 күн бұрын

Another saying is “slicker than owl poop on a wet limb “.

Your videos always seem to have just enough info to be helpful without overloading my hobby level brain. Thanks!

Use linseed oil , then spray laquer for protection in satin

Slick as Snot, That's what I've been missing!

When I applied poly always get down and see where the light hits it at different angles, and you can see if you are thin or heavy on talking about the wood.

No matter what I say it's going to come out wrong probably. As much as these videos are helpful to a lot of people I miss when things were being built. I learned tricks from build videos that the builder didn't mention and might not have been aware that it wasn't something that a lot of woodworkers knew. I bought your plans for the clamp rack but never used it after seeing the last rack you made. I've copied that rack and like it so much more than anything that anybody has made. Thank you for all the videos and links to products.

@StumpyNubs

Жыл бұрын

We have never been a "watch me build this" channel. This channel focuses on specific skills, techniques and shop related content. We build a lot of things in our videos, but we rarely present them as complete project tutorials. This video clip explains it in more detail: kzread.info/dash/bejne/X4dtw8ubqtCsY9o.html

Great video as always. I would like to add a suggestion, if you are going to use satin or simi gloss varnish you should use it only on the last one or two layers. By using gloss to build up layers you will get a deep rich look to the work and not a dull muddy look.

@TaylerMade

Жыл бұрын

don't you jut love the fact you pay more for gloss when it has less in it than satin.

@LarryBloom

Жыл бұрын

@@TaylerMade Yeah, agree....but perhaps that is because you are replacing cheap flattening agents with relatively more expensive urethane?

Very informative and clear. Eventhough it could give the wood an uneven finish thickness, what about spraying the PU ? Is it worth ? When working with large panels of plywood (intended for kitchen cabinets), hand finishing would take a infinite amount of time.

Better than pouring it on and hoping for the best.

Hi - Wow you are comprehensive - I am newbie - q1.is denatured alcohol good to wipe down ANY wooden surface before applying ANY type of finish q2. how much importance to you rate ensuring ALL dust particles are off the surface - if so - is that why you use denatured alcohol or does it also do some other purpose Sorry I hope you did not get lost with questions - I all over the place here

Thank you for informative video. I looked on line for toxicity of Poly before and I didn't remember any permanent damage from Poly. So your video concerned me a bit and so I did another search and the two websites said that Poly is relatively safe. The amount of VOCs released during a typical application is too low to produce harmful effects. You would need concentrated long term exposure to get permanent health damage. This does not occur even during industrial applications. You can get lung irritation, headaches, dizziness, nausea, asthmatic attacks but these are temporary. I do believe that a respirator is necessary to avoid these symptoms, but I don't think you lose brain cells from Poly. Brain cell losses could be from something else. ;)

What are some pet safe finishes? I'd like to make cat furniture. Also, how do you properly dispose of the stuff you cleaned your brushes with? What's the best way to the polyurathane? Can you pour the stuff you used (if you're using a brush) back into the container?

Thanks for another well thought out and produced video. Finishing is not my favorite part of the job, so your tips a d techniques are just what I need - get the job done with minimal fuss and best efficiency! Thanks!!