Converting AutoCAD Blocks to Civil 3D COGO Points the Easy Way
Read our blog post to convert AutoCAD Blocks to Civil 3D COGO Points at:
www.caddmicrosystems.com/blog/...
=============================================
Points are integral to civil design. While exchange formats like LandXML exist and are certainly the preferred way to transfer points between platforms, getting such a file is not always an option. Sometimes we get whatever is sent to us, and we're forced to figure out some way to use it for our own design purposes.
The Issue With AutoCAD Blocks
In the context of points, it's not uncommon for this scenario to play out when not everyone on the team is using Civil 3D. Third-party civil applications will often place points as standard AutoCAD blocks.
While Civil 3D does include a command to convert Softdesk Point Blocks to Civil 3D COGO Points, the command does not work on standard AutoCAD blocks. Unfortunately, Civil 3D does not provide a direct workflow to convert standard AutoCAD Blocks into Civil 3D COGO Points.
Although no direct workflow exists, an indirect one does.
Finding a Civil 3D Solution
The secret rests in converting the standard AutoCAD Blocks into a block Civil 3D will recognize as a Softdesk Point Block. If we can establish a single instance of a block Civil 3D will recognize as a Softdesk Point Block, we can then trick Civil 3D into thinking other (standard) AutoCAD Blocks are Softdesk Point Blocks.
The above video demonstrates the click-by-click process, but the high-level workflow to accomplish this is as follows:
1. Create a single (dummy) COGO point in your Civil 3D drawing. I used Points, Create Points - Miscellaneous, Manual in the video.
2. Use the Create Blocks from COGO Points command to generate a Softdesk Point Block of your dummy COGO point. Civil 3D places a block atop the COGO point already in your drawing. Take note of the name - POINT in my video.
3. Start the Replace Block command on the Blocks panel of the Express Tools Ribbon tab. Start by selecting the standard AutoCAD block that represents the points you want to convert in your drawing, and then choose the dummy Softdesk Point Block created in the steps above. The Replace Block command replaces the original block with the Softdesk Point Block.
4. Choose the Points, Replace Softdesk Block Points command from the Create Surface Data panel of the Home Ribbon tab. Select the newly converted blocks in your drawing, and specify a numbering convention for the selected blocks. Once complete, you'll have Civil 3D COGO points derived from the standard AutoCAD blocks you started with.
Пікірлер: 51
Also helped me out in Civil3D 2022. Thanks for tutorial, it was exactly what i needed!
Terrific, it was one of my life challenges that just got solved. Many thanks to your outstanding tutorial!
Man thank you very much, you have saved my life with this video, i needed that.
Perfect tutorial. Thanks a lot.
This worked great, easy to follow. thank you.
Thanks one of my go to videos.
Thanks for the useful info.
thank you so much! Great tutorial and info.
That's incredibly helpful! Wish i could give more thanks than just a thumbs up!
Perfekt! Vielen Dank!
Thanks it was really very useful 👏
It works, thanks
muito obrigada salvou meu dia
Thank tou sir, it's helpful
Thank you very much sir👍
When i pick the block to be replaced It tells me my block has Invalid characters in block name. The following characters are invalid: \/":?*|,=` my block does not contain any of these invalid symbols only a - in the name which is not invalid.
gonna try this. thank you very much good sir
Thanks a lot! Good luck in job!
A good tutorial, I often receive survey data with block X marks. A potentially easier method that I use is to simply insert a point inside the block via the block editor, then explode all the blocks which destroys all the blocks and leaves the points.
Thank you sir!
Waoooo... This saved my ass...Thanks for sharing
you are the man
Thanks!
Thanx alot for v.exciting video , Sir I've q. .if Ive to add existing level from block to those points
Thanks a lot for this video. Great work and huge relief for me. I need a little bit of help - my point just won't appear when it's created. It's just not displayed. No idea how to solve that.
THANK YOU
TYWM!
Thank you! Is there a way to number them with existing information? Specifically I'm trying to number them based on structure numbers
very helpfull
your amazing (y)
hi, just one thing, what ele blocks are taking in the process if i have many surfaces in the file
thanks sir
Does anyone else lose the description when they do this process? I work with trees and I specifically need the description to carry over from autocad block>>soft desk block>>cogo point. I notice it gets lost going from softdesk block to cogo point.
nice! Does this trick retain the point description from the block?
@criztiuca
2 жыл бұрын
no
It only converts one block at a time for me. How did you set the replace block command to replace all of the blocks in the dwg by just selecting one block?
@RameshGau
4 жыл бұрын
hi did u get ur query resolve. i also have similar query
I tried it but for me difficult to convert block to points even before I explode the file first
I try this, but something don't work....when i replace acad block to new block all points disapear , and i can't repleace softdesk point block...
Dear, i have tried as you did. The difference in my case is that i have two types of autocad blocks and i am trying to replace these with two different cogo blocks ( so that i get diff Raw description). It is not working fine. Autocad blocks remain blocks after replcement even after running Softpoint to cogo point. pl help me. thx in advance. Ramesh
@vijayakumarselvaraj-vg4jz
5 ай бұрын
Hi I have the same issue. Did the problem resolved for you
It didn't carry over the point description. How do I get it to retain the point description? This is pretty useless to me if I can't carry the descriptions.
Hello Mr, when i chose the block to be replaced, it gives me " INVALID. Block names cannot be equal ". Why ?
@omarkhaled8440
2 жыл бұрын
BECAUSE THE NAME OF BLOCK
i get stuck when replace block, it said cannot invoke (command) bla bla bla, would you mind to help me to solve this problem? thanks
So können Sie Softdesk-Punktblöcke in Autodesk Civil 3D-Punkte umwandeln......nicht funktioniert in Deutsche Version
Doesn't work for me, in my drawing the blocks (crosses) are all at 0 elevation/ level/ z, and the elevation I need to get is the written level text, which is written in text beside the block (cross).
@naseerbhatti177
8 ай бұрын
Yes u can convert them into cogo points with elevation.
Thanks for the video, but this is just too cumbersome in 2021. Hope Autodesk just adds a button for 'replace block with cogo'. And no, i dont wanna runa lisp to fix it either :p